AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Ux500 device tree enablement base for the v3.12

Browse Source 
development cycle:
 - Various cleanups like remove non-existant hardware from
   the Snowball device tree, prefix all files with "ste-*"
 - External regulators
 - Documentation updates
 - Delete some minor dangling platform data
 - Pin control settings for U8540 through DT
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJSDfMsAAoJEEEQszewGV1zg+cQAJBUM8IRpck+wgYyhEL9TsfO
 Lt98kq8fw2iiC3wYbC6VtGVTocOuaum6wchwuOPjK2bylPggrzCwjD3cLaNTUymD
 8wy/fZtWF0KEWa81pkpDDVFqWa6gc9H5UIPVFknf4wDaxb+vvw12o3wApKh/ThC/
 8j0zE5gXQMmRehLRaM/cXqK1QBcFPZxL060e8s5N4CE47JeaLHn1GAlbYCi0QXmg
 rV0trMaZhRQvj+FCJe1vHaf32rjjE071feFnqq3Q519puQulVQI/ULIP4zE584UO
 Vu4Wys5SAiqJuj2IbnTxYJRvP1Xbr/rHTOhXIoh2Zy52JXm9fvCASTJ4GvUxHHeR
 UXnwiaiyp03qDiwB/EKb5dpINqiwAY64I+jkN9sj2LULTwtVR6wsV4jMuIAHAPfz
 w1ZU8Ea4U4dgF9XzWIs5nYNDxoHaBK8m/uj6qETcCjTKuGGixP6ziNgobH8g3DMZ
 KxklRVFozyZwrC7MMk8vgEqhNtFUrnl3sQw/SUCUSMRk4PzWOCSaAvPFicpRXT8D
 FmmG8h4jf95GaA+ndF3i92NCk2R6PO04SUlMGlBNEjc+okyGHkLnL7v1MkIom6EB
 nM1+DaY4urYSeKdA72I4VG/RJBjToAdk2qysJ9xQtWOqAx1C3diL/57QKkltC+d7
 7tETJOTTm42QtgmTQmQq
 =Wm2y
 -----END PGP SIGNATURE-----

Merge tag 'ux500-devicetree-for-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/dt

From: Linus Walleij:
Ux500 device tree enablement base for the v3.12
development cycle:
- Various cleanups like remove non-existant hardware from
  the Snowball device tree, prefix all files with "ste-*"
- External regulators
- Documentation updates
- Delete some minor dangling platform data
- Pin control settings for U8540 through DT

* tag 'ux500-devicetree-for-v3.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: (22 commits)
  ARM: ux500: fix devicetree builds
  ARM: ux500: Remove u9540.dts as it's been replaced
  ARM: ux500: Apply a ste-* prefix onto dbx5x0.dtsi
  ARM: ux500: Apply a ste-* prefix onto stuib.dtsi
  ARM: ux500: Apply a ste-* prefix onto hrefv60plus.dts
  ARM: ux500: Apply a ste-* prefix onto hrefprev60.dts Signed-off-by: Lee Jones <lee.jones@linaro.org>
  ARM: ux500: Apply a ste-* prefix onto href.dtsi
  ARM: ux500: Apply a ste-* prefix onto ccu9540.dts
  ARM: ux500: Apply a ste-* prefix onto ccu8540.dts
  ARM: ux500: Apply a ste-* prefix onto snowball.dts
  ARM: ux500: Remove Snowball DTS entry for ROHM BH1780GLI ambient light sensor
  ARM: ux500: Remove Snowball DTS entry for TPS61052 chip
  ARM: ux500: Remove Snowball DTS entry for National Semiconductor LP5521 LED chip
  ARM: ux500: Remove Toshiba TC35892 I/O Expander's DT entry from Snowball's DTS
  ARM: u8540: DT: Set pinctrl mapping to i2c0,1,2,4 & 5
  ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2
  ARM: ux500: Stop passing MMC's platform data for Device Tree boots
  Documentation: Update binding for Nomadik and DBx5x based platforms
  ARM: ux500: Supply external regulator names for Snowball's DT
  ARM: ux500: Provide a supply name for the AB8500 AUX regulators to use
  ...
This commit is contained in:
Kevin Hilman 2013-08-20 15:34:49 -07:00
commit 4cb635d705
16 changed files with 477 additions and 163 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
View File

@ -1,8 +1,8 @@
ST Ericsson Nomadik pinmux controller
Required properties:
- compatible: "stericsson,nmk-pinctrl", "stericsson,nmk-pinctrl-db8540",
"stericsson,nmk-pinctrl-stn8815"
- compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl",
"stericsson,stn8815-pinctrl"
- reg: Should contain the register physical address and length of the PRCMU.
Please refer to pinctrl-bindings.txt in this directory for details of the
@ -68,7 +68,7 @@ Optional subnode-properties:
Example board file extract:
pinctrl@80157000 {
compatible = "stericsson,nmk-pinctrl";
compatible = "stericsson,db8500-pinctrl";
reg = <0x80157000 0x2000>;
pinctrl-names = "default";

10
arch/arm/boot/dts/Makefile
View File

@ -176,11 +176,11 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
am43x-epos-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
hrefprev60.dtb \
hrefv60plus.dtb \
ccu8540.dtb \
ccu9540.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60.dtb \
ste-hrefv60plus.dtb \
ste-ccu8540.dtb \
ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
emev2-kzm9d-reference.dtb \

41
arch/arm/boot/dts/ccu8540.dts
View File

@ -1,41 +0,0 @@
/*
* Copyright 2013 ST-Ericsson AB
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "dbx5x0.dtsi"
/ {
model = "ST-Ericsson U8540 platform with Device Tree";
compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
memory@0 {
reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
};
soc {
prcmu@80157000 {
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
};
uart@80120000 {
status = "okay";
};
uart@80121000 {
status = "okay";
};
uart@80007000 {
status = "okay";
};
};
};

196
arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi Normal file
View File

@ -0,0 +1,196 @@
/*
* Copyright 2012 ST-Ericsson
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "ste-nomadik-pinctrl.dtsi"
/ {
soc {
pinctrl {
uart0 {
uart0_default_mux: uart0_mux {
default_mux {
ste,function = "u0";
ste,pins = "u0_a_1";
};
};
uart0_default_mode: uart0_default {
default_cfg1 {
ste,pins = "GPIO0", "GPIO2";
ste,config = <&in_pu>;
};
default_cfg2 {
ste,pins = "GPIO1", "GPIO3";
ste,config = <&out_hi>;
};
};
uart0_sleep_mode: uart0_sleep {
sleep_cfg1 {
ste,pins = "GPIO0", "GPIO2";
ste,config = <&slpm_in_pu>;
};
sleep_cfg2 {
ste,pins = "GPIO1", "GPIO3";
ste,config = <&slpm_out_hi>;
};
};
};
uart2 {
uart2_default_mode: uart2_default {
default_mux {
ste,function = "u2";
ste,pins = "u2txrx_a_1";
};
default_cfg1 {
ste,pins = "GPIO120";
ste,config = <&in_pu>;
};
default_cfg2 {
ste,pins = "GPIO121";
ste,config = <&out_hi>;
};
};
uart2_sleep_mode: uart2_sleep {
sleep_cfg1 {
ste,pins = "GPIO120";
ste,config = <&slpm_in_pu>;
};
sleep_cfg2 {
ste,pins = "GPIO121";
ste,config = <&slpm_out_hi>;
};
};
};
i2c0 {
i2c0_default_mux: i2c_mux {
default_mux {
ste,function = "i2c0";
ste,pins = "i2c0_a_1";
};
};
i2c0_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO147", "GPIO148";
ste,config = <&in_pu>;
};
};
i2c0_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO147", "GPIO148";
ste,config = <&slpm_in_pu>;
};
};
};
i2c1 {
i2c1_default_mux: i2c_mux {
default_mux {
ste,function = "i2c1";
ste,pins = "i2c1_b_2";
};
};
i2c1_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO16", "GPIO17";
ste,config = <&in_pu>;
};
};
i2c1_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO16", "GPIO17";
ste,config = <&slpm_in_pu>;
};
};
};
i2c2 {
i2c2_default_mux: i2c_mux {
default_mux {
ste,function = "i2c2";
ste,pins = "i2c2_b_2";
};
};
i2c2_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO10", "GPIO11";
ste,config = <&in_pu>;
};
};
i2c2_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO11", "GPIO11";
ste,config = <&slpm_in_pu>;
};
};
};
i2c4 {
i2c4_default_mux: i2c_mux {
default_mux {
ste,function = "i2c4";
ste,pins = "i2c4_b_2";
};
};
i2c4_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO122", "GPIO123";
ste,config = <&in_pu>;
};
};
i2c4_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO122", "GPIO123";
ste,config = <&slpm_in_pu>;
};
};
};
i2c5 {
i2c5_default_mux: i2c_mux {
default_mux {
ste,function = "i2c5";
ste,pins = "i2c5_c_2";
};
};
i2c5_default_mode: i2c_default {
default_cfg1 {
ste,pins = "GPIO118", "GPIO119";
ste,config = <&in_pu>;
};
};
i2c5_sleep_mode: i2c_sleep {
sleep_cfg1 {
ste,pins = "GPIO118", "GPIO119";
ste,config = <&slpm_in_pu>;
};
};
};
};
};
};

86
arch/arm/boot/dts/ste-ccu8540.dts Normal file
View File

@ -0,0 +1,86 @@
/*
* Copyright 2013 ST-Ericsson AB
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "ste-dbx5x0.dtsi"
#include "ste-ccu8540-pinctrl.dtsi"
/ {
model = "ST-Ericsson U8540 platform with Device Tree";
compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
memory@0 {
reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
};
soc {
pinctrl {
compatible = "stericsson,db8540-pinctrl";
};
prcmu@80157000 {
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
};
uart@80120000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
pinctrl-1 = <&uart0_sleep_mode>;
status = "okay";
};
uart@80121000 {
status = "okay";
};
uart@80007000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&uart2_default_mode>;
pinctrl-1 = <&uart2_sleep_mode>;
status = "okay";
};
i2c0: i2c@80004000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
pinctrl-1 = <&i2c0_sleep_mode>;
};
i2c1: i2c@80122000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
pinctrl-1 = <&i2c1_sleep_mode>;
};
i2c2: i2c@80128000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>;
pinctrl-1 = <&i2c2_sleep_mode>;
};
i2c3: i2c@80110000 {
status = "disabled";
};
i2c4: i2c@8012a000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>;
pinctrl-1 = <&i2c4_sleep_mode>;
};
i2c5: i2c@80001000 {
pinctrl-names = "default","sleep";
pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>;
pinctrl-1 = <&i2c5_sleep_mode>;
};
};
};

2
arch/arm/boot/dts/ccu9540.dts → arch/arm/boot/dts/ste-ccu9540.dts
View File

@ -10,7 +10,7 @@
*/
/dts-v1/;
#include "dbx5x0.dtsi"
#include "ste-dbx5x0.dtsi"
/ {
model = "ST-Ericsson CCU9540 platform with Device Tree";

28
arch/arm/boot/dts/dbx5x0.dtsi → arch/arm/boot/dts/ste-dbx5x0.dtsi
View File

@ -457,8 +457,36 @@ codec: ab8500-codec {
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};
ext_regulators: ab8500-ext-regulators {
compatible = "stericsson,ab8500-ext-regulator";
ab8500_ext1_reg: ab8500_ext1 {
regulator-compatible = "ab8500_ext1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
ab8500_ext2_reg: ab8500_ext2 {
regulator-compatible = "ab8500_ext2";
regulator-min-microvolt = <1360000>;
regulator-max-microvolt = <1360000>;
regulator-boot-on;
regulator-always-on;
};
ab8500_ext3_reg: ab8500_ext3 {
regulator-compatible = "ab8500_ext3";
regulator-min-microvolt = <3400000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
};
};
ab8500-regulators {
compatible = "stericsson,ab8500-regulator";
vin-supply = <&ab8500_ext3_reg>;
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {

2
arch/arm/boot/dts/href.dtsi → arch/arm/boot/dts/ste-href.dtsi
View File

@ -10,7 +10,7 @@
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include "dbx5x0.dtsi"
#include "ste-dbx5x0.dtsi"
/ {
memory {

6
arch/arm/boot/dts/hrefprev60.dts → arch/arm/boot/dts/ste-hrefprev60.dts
View File

@ -10,9 +10,9 @@
*/
/dts-v1/;
#include "dbx5x0.dtsi"
#include "href.dtsi"
#include "stuib.dtsi"
#include "ste-dbx5x0.dtsi"
#include "ste-href.dtsi"
#include "ste-stuib.dtsi"
/ {
model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";

6
arch/arm/boot/dts/hrefv60plus.dts → arch/arm/boot/dts/ste-hrefv60plus.dts
View File

@ -10,9 +10,9 @@
*/
/dts-v1/;
#include "dbx5x0.dtsi"
#include "href.dtsi"
#include "stuib.dtsi"
#include "ste-dbx5x0.dtsi"
#include "ste-href.dtsi"
#include "ste-stuib.dtsi"
/ {
model = "ST-Ericsson HREF (v60+) platform with Device Tree";

95
arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi Normal file
View File

@ -0,0 +1,95 @@
/*
* Copyright 2012 ST-Ericsson
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/pinctrl/nomadik.h>
/ {
in_nopull: in_nopull {
ste,input = <INPUT_NOPULL>;
};
in_pu: input_pull_up {
ste,input = <INPUT_PULLUP>;
};
in_pd: input_pull_down {
ste,input = <INPUT_PULLDOWN>;
};
out_hi: output_high {
ste,output = <OUTPUT_HIGH>;
};
out_lo: output_low {
ste,output = <OUTPUT_LOW>;
};
gpio_out_lo: gpio_output_low {
ste,gpio = <GPIOMODE_ENABLED>;
ste,output = <OUTPUT_LOW>;
};
slpm_in_pu: slpm_in_pu {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-input = <SLPM_INPUT_PULLUP>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
};
slpm_in_wkup_pdis: slpm_in_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-input = <SLPM_DIR_INPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
slpm_out_lo: slpm_out_lo {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_LOW>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
};
slpm_out_hi: slpm_out_hi {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_HIGH>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
};
slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_OUTPUT_HIGH>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
slpm_out_wkup_pdis: slpm_out_wkup_pdis {
ste,sleep = <SLPM_ENABLED>;
ste,sleep-output = <SLPM_DIR_OUTPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
in_wkup_pdis: in_wkup_pdis {
ste,sleep-input = <SLPM_DIR_INPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
out_hi_wkup_pdis: out_hi_wkup_pdis {
ste,sleep-output = <SLPM_OUTPUT_HIGH>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
out_wkup_pdis: out_wkup_pdis {
ste,sleep-output = <SLPM_DIR_OUTPUT>;
ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
};
};

44
arch/arm/boot/dts/snowball.dts → arch/arm/boot/dts/ste-snowball.dts
View File

@ -10,7 +10,7 @@
*/
/dts-v1/;
#include "dbx5x0.dtsi"
#include "ste-dbx5x0.dtsi"
/ {
model = "Calao Systems Snowball platform with device tree";
@ -165,34 +165,6 @@ uart@80007000 {
status = "okay";
};
i2c@80004000 {
tc3589x@42 {
//compatible = "tc3589x";
reg = <0x42>;
gpios = <&gpio6 25 0x4>;
interrupt-parent = <&gpio6>;
};
tps61052@33 {
//compatible = "tps61052";
reg = <0x33>;
};
};
i2c@80128000 {
lp5521@33 {
// compatible = "lp5521";
reg = <0x33>;
};
lp5521@34 {
// compatible = "lp5521";
reg = <0x34>;
};
bh1780@29 {
// compatible = "rohm,bh1780gli";
reg = <0x33>;
};
};
cpufreq-cooling {
status = "okay";
};
@ -310,6 +282,20 @@ ab8500-gpio {
compatible = "stericsson,ab8500-gpio";
};
ext_regulators: ab8500-ext-regulators {
ab8500_ext1_reg: ab8500_ext1 {
regulator-name = "ab8500-ext-supply1";
};
ab8500_ext2_reg_reg: ab8500_ext2 {
regulator-name = "ab8500-ext-supply2";
};
ab8500_ext3_reg_reg: ab8500_ext3 {
regulator-name = "ab8500-ext-supply3";
};
};
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";

0
arch/arm/boot/dts/stuib.dtsi → arch/arm/boot/dts/ste-stuib.dtsi
View File

72
arch/arm/boot/dts/u9540.dts
View File

@ -1,72 +0,0 @@
/*
* Copyright 2012 ST-Ericsson AB
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
/include/ "dbx5x0.dtsi"
/ {
model = "ST-Ericsson U9540 platform with Device Tree";
compatible = "st-ericsson,u9540";
memory {
reg = <0x00000000 0x20000000>;
};
soc-u9500 {
uart@80120000 {
status = "okay";
};
uart@80121000 {
status = "okay";
};
uart@80007000 {
status = "okay";
};
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <4>;
mmc-cap-sd-highspeed;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux3_reg>;
cd-gpios = <&gpio7 6 0x4>; // 230
cd-inverted;
status = "okay";
};
// WLAN SDIO channel
sdi1_per2@80118000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <50000000>;
bus-width = <4>;
status = "okay";
};
// On-board eMMC
sdi4_per2@80114000 {
arm,primecell-periphid = <0x10480180>;
max-frequency = <100000000>;
bus-width = <8>;
mmc-cap-mmc-highspeed;
vmmc-supply = <&ab8500_ldo_aux2_reg>;
status = "okay";
};
};
};

8
arch/arm/mach-ux500/cpu-db8500.c
View File

@ -223,10 +223,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL),
OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL),
OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL),
OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL),
/* Requires clock name bindings. */
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),

36
include/dt-bindings/pinctrl/nomadik.h Normal file
View File

@ -0,0 +1,36 @@
/*
* nomadik.h
*
* Copyright (C) ST-Ericsson SA 2013
* Author: Gabriel Fernandez <gabriel.fernandez@st.com> for ST-Ericsson.
* License terms: GNU General Public License (GPL), version 2
*/
#define INPUT_NOPULL 0
#define INPUT_PULLUP 1
#define INPUT_PULLDOWN 2
#define OUTPUT_LOW 0
#define OUTPUT_HIGH 1
#define DIR_OUTPUT 2
#define SLPM_DISABLED 0
#define SLPM_ENABLED 1
#define SLPM_INPUT_NOPULL 0
#define SLPM_INPUT_PULLUP 1
#define SLPM_INPUT_PULLDOWN 2
#define SLPM_DIR_INPUT 3
#define SLPM_OUTPUT_LOW 0
#define SLPM_OUTPUT_HIGH 1
#define SLPM_DIR_OUTPUT 2
#define SLPM_WAKEUP_DISABLE 0
#define SLPM_WAKEUP_ENABLE 1
#define GPIOMODE_DISABLED 0
#define GPIOMODE_ENABLED 1
#define SLPM_PDIS_DISABLED 0
#define SLPM_PDIS_ENABLED 1