AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

[MTD] [NAND] Inherit CAFÉ NAND timing setup from firmware

Browse Source 
The precise timings are board-specific (or NAND chip specific) and don't
belong here. If they're set already, then use what we find there.
Otherwise, revert to the most conservative default values (and whinge).

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
This commit is contained in:
David Woodhouse 2007-01-23 15:35:27 +08:00
parent 9ee79a3d37
commit 527a4f45ef
1 changed files with 30 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
drivers/mtd/nand/cafe.c
View File

@ -77,8 +77,9 @@ module_param(regdebug, int, 0644);
static int checkecc = 1;
module_param(checkecc, int, 0644);
static int slowtiming = 0;
module_param(slowtiming, int, 0644);
static int numtimings;
static int timing[3];
module_param_array(timing, int, &numtimings, 0644);
/* Hrm. Why isn't this already conditional on something in the struct device? */
#define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
@ -528,6 +529,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
{
struct mtd_info *mtd;
struct cafe_priv *cafe;
uint32_t timing1, timing2, timing3;
uint32_t ctrl;
int err = 0;
@ -579,27 +581,41 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev,
cafe->nand.block_bad = cafe_nand_block_bad;
}
if (numtimings && numtimings != 3) {
dev_warn(&cafe->pdev->dev, "%d timing register values ignored; precisely three are required\n", numtimings);
}
if (numtimings == 3) {
timing1 = timing[0];
timing2 = timing[1];
timing3 = timing[2];
cafe_dev_dbg(&cafe->pdev->dev, "Using provided timings (%08x %08x %08x)\n",
timing1, timing2, timing3);
} else {
timing1 = cafe_readl(cafe, NAND_TIMING1);
timing2 = cafe_readl(cafe, NAND_TIMING2);
timing3 = cafe_readl(cafe, NAND_TIMING3);
if (timing1 | timing2 | timing3) {
cafe_dev_dbg(&cafe->pdev->dev, "Timing registers already set (%08x %08x %08x)\n", timing1, timing2, timing3);
} else {
dev_warn(&cafe->pdev->dev, "Timing registers unset; using most conservative defaults\n");
timing1 = timing2 = timing3 = 0xffffffff;
}
}
/* Start off by resetting the NAND controller completely */
cafe_writel(cafe, 1, NAND_RESET);
cafe_writel(cafe, 0, NAND_RESET);
cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
cafe_writel(cafe, timing1, NAND_TIMING1);
cafe_writel(cafe, timing2, NAND_TIMING2);
cafe_writel(cafe, timing3, NAND_TIMING3);
/* Timings from Marvell's test code (not verified or calculated by us) */
if (!slowtiming) {
cafe_writel(cafe, 0x01010a0a, NAND_TIMING1);
cafe_writel(cafe, 0x24121212, NAND_TIMING2);
cafe_writel(cafe, 0x11000000, NAND_TIMING3);
} else {
cafe_writel(cafe, 0xffffffff, NAND_TIMING1);
cafe_writel(cafe, 0xffffffff, NAND_TIMING2);
cafe_writel(cafe, 0xffffffff, NAND_TIMING3);
}
cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
err = request_irq(pdev->irq, &cafe_nand_interrupt, SA_SHIRQ, "CAFE NAND", mtd);
if (err) {
dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
goto out_free_dma;
}
#if 1