AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

OMAP: PM constraints: add return values; add requesting device param to omap_pm_set_max_dev_wakeup_lat()

Browse Source 
Add return values to the PM constraint functions.  This allows the PM
core to provide feedback to the caller if a constraint is not
possible.  Update the one upstream user of omap_pm_set_max_mpu_wakeup_lat()
to add a compatibility wrapper, needed until the driver is changed.

Update some of the documentation to conform more closely to kerneldoc style.

Add an additional device parameter to omap_pm_set_max_dev_wakeup_lat()
to identify the device requesting the constraint.  This is so repeated calls
to omap_pm_set_max_dev_wakeup_lat() with the same requesting device can
override the device's previously-set constraint.  Also, it allows the PM
core to make a decision as to whether or not the constraint should be
satisfied, based on the caller's identity.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
This commit is contained in:
Paul Walmsley 2010-07-26 16:34:34 -06:00
parent 887adeac28
commit 564889c1c0
3 changed files with 71 additions and 44 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/plat-omap/i2c.c
View File

@ -138,6 +138,16 @@ static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id)
return platform_device_register(pdev);
}
/*
* XXX This function is a temporary compatibility wrapper - only
* needed until the I2C driver can be converted to call
* omap_pm_set_max_dev_wakeup_lat() and handle a return code.
*/
static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
{
omap_pm_set_max_mpu_wakeup_lat(dev, t);
}
static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
{
struct resource *res;
@ -168,7 +178,7 @@ static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
struct omap_i2c_bus_platform_data *pd;
pd = pdev->dev.platform_data;
pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat;
pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
}
return platform_device_register(pdev);

69
arch/arm/plat-omap/include/plat/omap-pm.h
View File

@ -1,8 +1,8 @@
/*
* omap-pm.h - OMAP power management interface
*
* Copyright (C) 2008-2009 Texas Instruments, Inc.
* Copyright (C) 2008-2009 Nokia Corporation
* Copyright (C) 2008-2010 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
* Interface developed by (in alphabetical order): Karthik Dasu, Jouni
@ -89,7 +89,7 @@ void omap_pm_if_exit(void);
* @t: maximum MPU wakeup latency in microseconds
*
* Request that the maximum interrupt latency for the MPU to be no
* greater than 't' microseconds. "Interrupt latency" in this case is
* greater than @t microseconds. "Interrupt latency" in this case is
* defined as the elapsed time from the occurrence of a hardware or
* timer interrupt to the time when the device driver's interrupt
* service routine has been entered by the MPU.
@ -105,15 +105,19 @@ void omap_pm_if_exit(void);
* elapsed from when a device driver enables a hardware device with
* clk_enable(), to when the device is ready for register access or
* other use. To control this device wakeup latency, use
* set_max_dev_wakeup_lat()
* omap_pm_set_max_dev_wakeup_lat()
*
* Multiple calls to set_max_mpu_wakeup_lat() will replace the
* Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the
* previous t value. To remove the latency target for the MPU, call
* with t = -1.
*
* No return value.
* XXX This constraint will be deprecated soon in favor of the more
* general omap_pm_set_max_dev_wakeup_lat()
*
* Returns -EINVAL for an invalid argument, -ERANGE if the constraint
* is not satisfiable, or 0 upon success.
*/
void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
/**
@ -123,8 +127,8 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
* @r: minimum throughput (in KiB/s)
*
* Request that the minimum data throughput on the OCP interconnect
* attached to device 'dev' interconnect agent 'tbus_id' be no less
* than 'r' KiB/s.
* attached to device @dev interconnect agent @tbus_id be no less
* than @r KiB/s.
*
* It is expected that the OMAP PM or bus code will use this
* information to set the interconnect clock to run at the lowest
@ -138,40 +142,44 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
* code will also need to add an minimum L3 interconnect speed
* constraint,
*
* Multiple calls to set_min_bus_tput() will replace the previous rate
* value for this device. To remove the interconnect throughput
* restriction for this device, call with r = 0.
* Multiple calls to omap_pm_set_min_bus_tput() will replace the
* previous rate value for this device. To remove the interconnect
* throughput restriction for this device, call with r = 0.
*
* No return value.
* Returns -EINVAL for an invalid argument, -ERANGE if the constraint
* is not satisfiable, or 0 upon success.
*/
void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
/**
* omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
* @dev: struct device *
* @req_dev: struct device * requesting the constraint, or NULL if none
* @dev: struct device * to set the constraint one
* @t: maximum device wakeup latency in microseconds
*
* Request that the maximum amount of time necessary for a device to
* become accessible after its clocks are enabled should be no greater
* than 't' microseconds. Specifically, this represents the time from
* when a device driver enables device clocks with clk_enable(), to
* when the register reads and writes on the device will succeed.
* This function should be called before clk_disable() is called,
* since the power state transition decision may be made during
* clk_disable().
* Request that the maximum amount of time necessary for a device @dev
* to become accessible after its clocks are enabled should be no
* greater than @t microseconds. Specifically, this represents the
* time from when a device driver enables device clocks with
* clk_enable(), to when the register reads and writes on the device
* will succeed. This function should be called before clk_disable()
* is called, since the power state transition decision may be made
* during clk_disable().
*
* It is intended that underlying PM code will use this information to
* determine what power state to put the powerdomain enclosing this
* device into.
*
* Multiple calls to set_max_dev_wakeup_lat() will replace the
* previous wakeup latency values for this device. To remove the wakeup
* latency restriction for this device, call with t = -1.
* Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the
* previous wakeup latency values for this device. To remove the
* wakeup latency restriction for this device, call with t = -1.
*
* No return value.
* Returns -EINVAL for an invalid argument, -ERANGE if the constraint
* is not satisfiable, or 0 upon success.
*/
void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
long t);
/**
@ -198,9 +206,10 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t);
* value for this device. To remove the maximum DMA latency for this
* device, call with t = -1.
*
* No return value.
* Returns -EINVAL for an invalid argument, -ERANGE if the constraint
* is not satisfiable, or 0 upon success.
*/
void omap_pm_set_max_sdma_lat(struct device *dev, long t);
int omap_pm_set_max_sdma_lat(struct device *dev, long t);
/*

34
arch/arm/plat-omap/omap-pm-noop.c
View File

@ -34,11 +34,11 @@ struct omap_opp *l3_opps;
* Device-driver-originated constraints (via board-*.c files)
*/
void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
{
if (!dev || t < -1) {
WARN_ON(1);
return;
WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
return -EINVAL;
};
if (t == -1)
@ -58,14 +58,16 @@ void omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t)
*
* TI CDP code can call constraint_set here.
*/
return 0;
}
void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
{
if (!dev || (agent_id != OCP_INITIATOR_AGENT &&
agent_id != OCP_TARGET_AGENT)) {
WARN_ON(1);
return;
WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
return -EINVAL;
};
if (r == 0)
@ -83,13 +85,16 @@ void omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r)
*
* TI CDP code can call constraint_set here on the VDD2 OPP.
*/
return 0;
}
void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
long t)
{
if (!dev || t < -1) {
WARN_ON(1);
return;
if (!req_dev || !dev || t < -1) {
WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
return -EINVAL;
};
if (t == -1)
@ -111,13 +116,15 @@ void omap_pm_set_max_dev_wakeup_lat(struct device *dev, long t)
*
* TI CDP code can call constraint_set here.
*/
return 0;
}
void omap_pm_set_max_sdma_lat(struct device *dev, long t)
int omap_pm_set_max_sdma_lat(struct device *dev, long t)
{
if (!dev || t < -1) {
WARN_ON(1);
return;
WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__);
return -EINVAL;
};
if (t == -1)
@ -139,6 +146,7 @@ void omap_pm_set_max_sdma_lat(struct device *dev, long t)
* TI CDP code can call constraint_set here.
*/
return 0;
}