net: atheros: atl1c: use new api ethtool_{get|set}_link_ksettings

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Philippe Reynes 2016-11-12 17:32:49 +01:00 committed by David S. Miller
parent 36a4e690a7
commit 58046c7043

View File

@ -26,46 +26,52 @@
#include "atl1c.h"
static int atl1c_get_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
static int atl1c_get_link_ksettings(struct net_device *netdev,
struct ethtool_link_ksettings *cmd)
{
struct atl1c_adapter *adapter = netdev_priv(netdev);
struct atl1c_hw *hw = &adapter->hw;
u32 supported, advertising;
ecmd->supported = (SUPPORTED_10baseT_Half |
supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_100baseT_Full |
SUPPORTED_Autoneg |
SUPPORTED_TP);
if (hw->link_cap_flags & ATL1C_LINK_CAP_1000M)
ecmd->supported |= SUPPORTED_1000baseT_Full;
supported |= SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_TP;
advertising = ADVERTISED_TP;
ecmd->advertising |= hw->autoneg_advertised;
advertising |= hw->autoneg_advertised;
ecmd->port = PORT_TP;
ecmd->phy_address = 0;
ecmd->transceiver = XCVR_INTERNAL;
cmd->base.port = PORT_TP;
cmd->base.phy_address = 0;
if (adapter->link_speed != SPEED_0) {
ethtool_cmd_speed_set(ecmd, adapter->link_speed);
cmd->base.speed = adapter->link_speed;
if (adapter->link_duplex == FULL_DUPLEX)
ecmd->duplex = DUPLEX_FULL;
cmd->base.duplex = DUPLEX_FULL;
else
ecmd->duplex = DUPLEX_HALF;
cmd->base.duplex = DUPLEX_HALF;
} else {
ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
ecmd->duplex = DUPLEX_UNKNOWN;
cmd->base.speed = SPEED_UNKNOWN;
cmd->base.duplex = DUPLEX_UNKNOWN;
}
ecmd->autoneg = AUTONEG_ENABLE;
cmd->base.autoneg = AUTONEG_ENABLE;
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
supported);
ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
advertising);
return 0;
}
static int atl1c_set_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
static int atl1c_set_link_ksettings(struct net_device *netdev,
const struct ethtool_link_ksettings *cmd)
{
struct atl1c_adapter *adapter = netdev_priv(netdev);
struct atl1c_hw *hw = &adapter->hw;
@ -74,12 +80,12 @@ static int atl1c_set_settings(struct net_device *netdev,
while (test_and_set_bit(__AT_RESETTING, &adapter->flags))
msleep(1);
if (ecmd->autoneg == AUTONEG_ENABLE) {
if (cmd->base.autoneg == AUTONEG_ENABLE) {
autoneg_advertised = ADVERTISED_Autoneg;
} else {
u32 speed = ethtool_cmd_speed(ecmd);
u32 speed = cmd->base.speed;
if (speed == SPEED_1000) {
if (ecmd->duplex != DUPLEX_FULL) {
if (cmd->base.duplex != DUPLEX_FULL) {
if (netif_msg_link(adapter))
dev_warn(&adapter->pdev->dev,
"1000M half is invalid\n");
@ -88,12 +94,12 @@ static int atl1c_set_settings(struct net_device *netdev,
}
autoneg_advertised = ADVERTISED_1000baseT_Full;
} else if (speed == SPEED_100) {
if (ecmd->duplex == DUPLEX_FULL)
if (cmd->base.duplex == DUPLEX_FULL)
autoneg_advertised = ADVERTISED_100baseT_Full;
else
autoneg_advertised = ADVERTISED_100baseT_Half;
} else {
if (ecmd->duplex == DUPLEX_FULL)
if (cmd->base.duplex == DUPLEX_FULL)
autoneg_advertised = ADVERTISED_10baseT_Full;
else
autoneg_advertised = ADVERTISED_10baseT_Half;
@ -284,8 +290,6 @@ static int atl1c_nway_reset(struct net_device *netdev)
}
static const struct ethtool_ops atl1c_ethtool_ops = {
.get_settings = atl1c_get_settings,
.set_settings = atl1c_set_settings,
.get_drvinfo = atl1c_get_drvinfo,
.get_regs_len = atl1c_get_regs_len,
.get_regs = atl1c_get_regs,
@ -297,6 +301,8 @@ static const struct ethtool_ops atl1c_ethtool_ops = {
.get_link = ethtool_op_get_link,
.get_eeprom_len = atl1c_get_eeprom_len,
.get_eeprom = atl1c_get_eeprom,
.get_link_ksettings = atl1c_get_link_ksettings,
.set_link_ksettings = atl1c_set_link_ksettings,
};
void atl1c_set_ethtool_ops(struct net_device *netdev)