forked from luck/tmp_suning_uos_patched
hwmon: (pmbus/lm25066) Add support for LM25056
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Guenter Roeck
parent
e53e6497fc
commit
58615a94f6
|
|
@ -1,7 +1,13 @@
|
|||
Kernel driver max8688
|
||||
Kernel driver lm25066
|
||||
=====================
|
||||
|
||||
Supported chips:
|
||||
* TI LM25056
|
||||
Prefix: 'lm25056'
|
||||
Addresses scanned: -
|
||||
Datasheets:
|
||||
http://www.ti.com/lit/gpn/lm25056
|
||||
http://www.ti.com/lit/gpn/lm25056a
|
||||
* National Semiconductor LM25066
|
||||
Prefix: 'lm25066'
|
||||
Addresses scanned: -
|
||||
|
|
@ -25,8 +31,9 @@ Author: Guenter Roeck <linux@roeck-us.net>
|
|||
Description
|
||||
-----------
|
||||
|
||||
This driver supports hardware montoring for National Semiconductor LM25066,
|
||||
LM5064, and LM5064 Power Management, Monitoring, Control, and Protection ICs.
|
||||
This driver supports hardware montoring for National Semiconductor / TI LM25056,
|
||||
LM25066, LM5064, and LM5064 Power Management, Monitoring, Control, and
|
||||
Protection ICs.
|
||||
|
||||
The driver is a client driver to the core PMBus driver. Please see
|
||||
Documentation/hwmon/pmbus for details on PMBus client drivers.
|
||||
|
|
@ -62,8 +69,13 @@ in1_max_alarm Input voltage high alarm.
|
|||
|
||||
in2_label "vmon"
|
||||
in2_input Measured voltage on VAUX pin
|
||||
in2_min Minimum VAUX voltage (LM25056 only).
|
||||
in2_max Maximum VAUX voltage (LM25056 only).
|
||||
in2_min_alarm VAUX voltage low alarm (LM25056 only).
|
||||
in2_max_alarm VAUX voltage high alarm (LM25056 only).
|
||||
|
||||
in3_label "vout1"
|
||||
Not supported on LM25056.
|
||||
in3_input Measured output voltage.
|
||||
in3_average Average measured output voltage.
|
||||
in3_min Minimum output voltage.
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@ config SENSORS_LM25066
|
|||
default n
|
||||
help
|
||||
If you say yes here you get hardware monitoring support for National
|
||||
Semiconductor LM25066, LM5064, and LM5066.
|
||||
Semiconductor LM25056, LM25066, LM5064, and LM5066.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called lm25066.
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Hardware monitoring driver for LM25066 / LM5064 / LM5066
|
||||
* Hardware monitoring driver for LM25056 / LM25066 / LM5064 / LM5066
|
||||
*
|
||||
* Copyright (c) 2011 Ericsson AB.
|
||||
* Copyright (c) 2013 Guenter Roeck
|
||||
|
|
@ -27,7 +27,7 @@
|
|||
#include <linux/i2c.h>
|
||||
#include "pmbus.h"
|
||||
|
||||
enum chips { lm25066, lm5064, lm5066 };
|
||||
enum chips { lm25056, lm25066, lm5064, lm5066 };
|
||||
|
||||
#define LM25066_READ_VAUX 0xd0
|
||||
#define LM25066_MFR_READ_IIN 0xd1
|
||||
|
|
@ -44,6 +44,14 @@ enum chips { lm25066, lm5064, lm5066 };
|
|||
|
||||
#define LM25066_DEV_SETUP_CL (1 << 4) /* Current limit */
|
||||
|
||||
/* LM25056 only */
|
||||
|
||||
#define LM25056_VAUX_OV_WARN_LIMIT 0xe3
|
||||
#define LM25056_VAUX_UV_WARN_LIMIT 0xe4
|
||||
|
||||
#define LM25056_MFR_STS_VAUX_OV_WARN (1 << 1)
|
||||
#define LM25056_MFR_STS_VAUX_UV_WARN (1 << 0)
|
||||
|
||||
struct __coeff {
|
||||
short m, b, R;
|
||||
};
|
||||
|
|
@ -51,7 +59,34 @@ struct __coeff {
|
|||
#define PSC_CURRENT_IN_L (PSC_NUM_CLASSES)
|
||||
#define PSC_POWER_L (PSC_NUM_CLASSES + 1)
|
||||
|
||||
static struct __coeff lm25066_coeff[3][PSC_NUM_CLASSES + 2] = {
|
||||
static struct __coeff lm25066_coeff[4][PSC_NUM_CLASSES + 2] = {
|
||||
[lm25056] = {
|
||||
[PSC_VOLTAGE_IN] = {
|
||||
.m = 16296,
|
||||
.R = -2,
|
||||
},
|
||||
[PSC_CURRENT_IN] = {
|
||||
.m = 13797,
|
||||
.R = -2,
|
||||
},
|
||||
[PSC_CURRENT_IN_L] = {
|
||||
.m = 6726,
|
||||
.R = -2,
|
||||
},
|
||||
[PSC_POWER] = {
|
||||
.m = 5501,
|
||||
.R = -3,
|
||||
},
|
||||
[PSC_POWER_L] = {
|
||||
.m = 26882,
|
||||
.R = -4,
|
||||
},
|
||||
[PSC_TEMPERATURE] = {
|
||||
.m = 1580,
|
||||
.b = -14500,
|
||||
.R = -2,
|
||||
},
|
||||
},
|
||||
[lm25066] = {
|
||||
[PSC_VOLTAGE_IN] = {
|
||||
.m = 22070,
|
||||
|
|
@ -161,6 +196,10 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
|
|||
break;
|
||||
/* Adjust returned value to match VIN coefficients */
|
||||
switch (data->id) {
|
||||
case lm25056:
|
||||
/* VIN: 6.14 mV VAUX: 293 uV LSB */
|
||||
ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
|
||||
break;
|
||||
case lm25066:
|
||||
/* VIN: 4.54 mV VAUX: 283.2 uV LSB */
|
||||
ret = DIV_ROUND_CLOSEST(ret * 2832, 45400);
|
||||
|
|
@ -214,6 +253,58 @@ static int lm25066_read_word_data(struct i2c_client *client, int page, int reg)
|
|||
return ret;
|
||||
}
|
||||
|
||||
static int lm25056_read_word_data(struct i2c_client *client, int page, int reg)
|
||||
{
|
||||
int ret;
|
||||
|
||||
switch (reg) {
|
||||
case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
|
||||
ret = pmbus_read_word_data(client, 0,
|
||||
LM25056_VAUX_UV_WARN_LIMIT);
|
||||
if (ret < 0)
|
||||
break;
|
||||
/* Adjust returned value to match VIN coefficients */
|
||||
ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
|
||||
break;
|
||||
case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
|
||||
ret = pmbus_read_word_data(client, 0,
|
||||
LM25056_VAUX_OV_WARN_LIMIT);
|
||||
if (ret < 0)
|
||||
break;
|
||||
/* Adjust returned value to match VIN coefficients */
|
||||
ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
|
||||
break;
|
||||
default:
|
||||
ret = lm25066_read_word_data(client, page, reg);
|
||||
break;
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int lm25056_read_byte_data(struct i2c_client *client, int page, int reg)
|
||||
{
|
||||
int ret, s;
|
||||
|
||||
switch (reg) {
|
||||
case PMBUS_VIRT_STATUS_VMON:
|
||||
ret = pmbus_read_byte_data(client, 0,
|
||||
PMBUS_STATUS_MFR_SPECIFIC);
|
||||
if (ret < 0)
|
||||
break;
|
||||
s = 0;
|
||||
if (ret & LM25056_MFR_STS_VAUX_UV_WARN)
|
||||
s |= PB_VOLTAGE_UV_WARNING;
|
||||
if (ret & LM25056_MFR_STS_VAUX_OV_WARN)
|
||||
s |= PB_VOLTAGE_OV_WARNING;
|
||||
ret = s;
|
||||
break;
|
||||
default:
|
||||
ret = -ENODATA;
|
||||
break;
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
|
||||
u16 word)
|
||||
{
|
||||
|
|
@ -243,6 +334,22 @@ static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
|
|||
word);
|
||||
pmbus_clear_cache(client);
|
||||
break;
|
||||
case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
|
||||
/* Adjust from VIN coefficients (for LM25056) */
|
||||
word = DIV_ROUND_CLOSEST((int)word * 6140, 293);
|
||||
word = ((s16)word < 0) ? 0 : clamp_val(word, 0, 0x0fff);
|
||||
ret = pmbus_write_word_data(client, 0,
|
||||
LM25056_VAUX_UV_WARN_LIMIT, word);
|
||||
pmbus_clear_cache(client);
|
||||
break;
|
||||
case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
|
||||
/* Adjust from VIN coefficients (for LM25056) */
|
||||
word = DIV_ROUND_CLOSEST((int)word * 6140, 293);
|
||||
word = ((s16)word < 0) ? 0 : clamp_val(word, 0, 0x0fff);
|
||||
ret = pmbus_write_word_data(client, 0,
|
||||
LM25056_VAUX_OV_WARN_LIMIT, word);
|
||||
pmbus_clear_cache(client);
|
||||
break;
|
||||
case PMBUS_VIRT_RESET_PIN_HISTORY:
|
||||
ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK);
|
||||
break;
|
||||
|
|
@ -284,12 +391,18 @@ static int lm25066_probe(struct i2c_client *client,
|
|||
info->format[PSC_TEMPERATURE] = direct;
|
||||
info->format[PSC_POWER] = direct;
|
||||
|
||||
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON
|
||||
| PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT
|
||||
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
|
||||
|
||||
info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON | PMBUS_HAVE_VOUT
|
||||
| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN
|
||||
| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
|
||||
|
||||
if (data->id == lm25056) {
|
||||
info->func[0] |= PMBUS_HAVE_STATUS_VMON;
|
||||
info->read_word_data = lm25056_read_word_data;
|
||||
info->read_byte_data = lm25056_read_byte_data;
|
||||
} else {
|
||||
info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
|
||||
info->read_word_data = lm25066_read_word_data;
|
||||
}
|
||||
info->write_word_data = lm25066_write_word_data;
|
||||
|
||||
coeff = &lm25066_coeff[data->id][0];
|
||||
|
|
@ -318,6 +431,7 @@ static int lm25066_probe(struct i2c_client *client,
|
|||
}
|
||||
|
||||
static const struct i2c_device_id lm25066_id[] = {
|
||||
{"lm25056", lm25056},
|
||||
{"lm25066", lm25066},
|
||||
{"lm5064", lm5064},
|
||||
{"lm5066", lm5066},
|
||||
|
|
@ -339,5 +453,5 @@ static struct i2c_driver lm25066_driver = {
|
|||
module_i2c_driver(lm25066_driver);
|
||||
|
||||
MODULE_AUTHOR("Guenter Roeck");
|
||||
MODULE_DESCRIPTION("PMBus driver for LM25066/LM5064/LM5066");
|
||||
MODULE_DESCRIPTION("PMBus driver for LM25056/LM25066/LM5064/LM5066");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user