forked from luck/tmp_suning_uos_patched
serial: driver for Conexant Digicolor USART
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Baruch Siach
Greg Kroah-Hartman
parent
48c7386317
commit
5930cb3511
|
|
@ -1549,6 +1549,21 @@ config SERIAL_FSL_LPUART_CONSOLE
|
|||
If you have enabled the lpuart serial port on the Freescale SoCs,
|
||||
you can make it the console by answering Y to this option.
|
||||
|
||||
config SERIAL_CONEXANT_DIGICOLOR
|
||||
tristate "Conexant Digicolor CX92xxx USART serial port support"
|
||||
depends on OF
|
||||
select SERIAL_CORE
|
||||
help
|
||||
Support for the on-chip USART on Conexant Digicolor SoCs.
|
||||
|
||||
config SERIAL_CONEXANT_DIGICOLOR_CONSOLE
|
||||
bool "Console on Conexant Digicolor serial port"
|
||||
depends on SERIAL_CONEXANT_DIGICOLOR=y
|
||||
select SERIAL_CORE_CONSOLE
|
||||
help
|
||||
If you have enabled the USART serial port on Conexant Digicolor
|
||||
SoCs, you can make it the console by answering Y to this option.
|
||||
|
||||
config SERIAL_ST_ASC
|
||||
tristate "ST ASC serial port support"
|
||||
select SERIAL_CORE
|
||||
|
|
|
|||
|
|
@ -92,6 +92,7 @@ obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
|
|||
obj-$(CONFIG_SERIAL_ARC) += arc_uart.o
|
||||
obj-$(CONFIG_SERIAL_RP2) += rp2.o
|
||||
obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o
|
||||
obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o
|
||||
obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o
|
||||
|
||||
# GPIOLIB helpers for modem control lines
|
||||
|
|
|
|||
563
drivers/tty/serial/digicolor-usart.c
Normal file
563
drivers/tty/serial/digicolor-usart.c
Normal file
|
|
@ -0,0 +1,563 @@
|
|||
/*
|
||||
* Driver for Conexant Digicolor serial ports (USART)
|
||||
*
|
||||
* Author: Baruch Siach <baruch@tkos.co.il>
|
||||
*
|
||||
* Copyright (C) 2014 Paradox Innovation Ltd.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/console.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/serial.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/tty.h>
|
||||
#include <linux/tty_flip.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/workqueue.h>
|
||||
|
||||
#define UA_ENABLE 0x00
|
||||
#define UA_ENABLE_ENABLE BIT(0)
|
||||
|
||||
#define UA_CONTROL 0x01
|
||||
#define UA_CONTROL_RX_ENABLE BIT(0)
|
||||
#define UA_CONTROL_TX_ENABLE BIT(1)
|
||||
#define UA_CONTROL_SOFT_RESET BIT(2)
|
||||
|
||||
#define UA_STATUS 0x02
|
||||
#define UA_STATUS_PARITY_ERR BIT(0)
|
||||
#define UA_STATUS_FRAME_ERR BIT(1)
|
||||
#define UA_STATUS_OVERRUN_ERR BIT(2)
|
||||
#define UA_STATUS_TX_READY BIT(6)
|
||||
|
||||
#define UA_CONFIG 0x03
|
||||
#define UA_CONFIG_CHAR_LEN BIT(0)
|
||||
#define UA_CONFIG_STOP_BITS BIT(1)
|
||||
#define UA_CONFIG_PARITY BIT(2)
|
||||
#define UA_CONFIG_ODD_PARITY BIT(4)
|
||||
|
||||
#define UA_EMI_REC 0x04
|
||||
|
||||
#define UA_HBAUD_LO 0x08
|
||||
#define UA_HBAUD_HI 0x09
|
||||
|
||||
#define UA_STATUS_FIFO 0x0a
|
||||
#define UA_STATUS_FIFO_RX_EMPTY BIT(2)
|
||||
#define UA_STATUS_FIFO_RX_INT_ALMOST BIT(3)
|
||||
#define UA_STATUS_FIFO_TX_FULL BIT(4)
|
||||
#define UA_STATUS_FIFO_TX_INT_ALMOST BIT(7)
|
||||
|
||||
#define UA_CONFIG_FIFO 0x0b
|
||||
#define UA_CONFIG_FIFO_RX_THRESH 7
|
||||
#define UA_CONFIG_FIFO_RX_FIFO_MODE BIT(3)
|
||||
#define UA_CONFIG_FIFO_TX_FIFO_MODE BIT(7)
|
||||
|
||||
#define UA_INTFLAG_CLEAR 0x1c
|
||||
#define UA_INTFLAG_SET 0x1d
|
||||
#define UA_INT_ENABLE 0x1e
|
||||
#define UA_INT_STATUS 0x1f
|
||||
|
||||
#define UA_INT_TX BIT(0)
|
||||
#define UA_INT_RX BIT(1)
|
||||
|
||||
#define DIGICOLOR_USART_NR 3
|
||||
|
||||
/*
|
||||
* We use the 16 bytes hardware FIFO to buffer Rx traffic. Rx interrupt is
|
||||
* only produced when the FIFO is filled more than a certain configurable
|
||||
* threshold. Unfortunately, there is no way to set this threshold below half
|
||||
* FIFO. This means that we must periodically poll the FIFO status register to
|
||||
* see whether there are waiting Rx bytes.
|
||||
*/
|
||||
|
||||
struct digicolor_port {
|
||||
struct uart_port port;
|
||||
struct delayed_work rx_poll_work;
|
||||
};
|
||||
|
||||
static struct uart_port *digicolor_ports[DIGICOLOR_USART_NR];
|
||||
|
||||
static bool digicolor_uart_tx_full(struct uart_port *port)
|
||||
{
|
||||
return !!(readb_relaxed(port->membase + UA_STATUS_FIFO) &
|
||||
UA_STATUS_FIFO_TX_FULL);
|
||||
}
|
||||
|
||||
static bool digicolor_uart_rx_empty(struct uart_port *port)
|
||||
{
|
||||
return !!(readb_relaxed(port->membase + UA_STATUS_FIFO) &
|
||||
UA_STATUS_FIFO_RX_EMPTY);
|
||||
}
|
||||
|
||||
static void digicolor_uart_stop_tx(struct uart_port *port)
|
||||
{
|
||||
u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE);
|
||||
|
||||
int_enable &= ~UA_INT_TX;
|
||||
writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE);
|
||||
}
|
||||
|
||||
static void digicolor_uart_start_tx(struct uart_port *port)
|
||||
{
|
||||
u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE);
|
||||
|
||||
int_enable |= UA_INT_TX;
|
||||
writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE);
|
||||
}
|
||||
|
||||
static void digicolor_uart_stop_rx(struct uart_port *port)
|
||||
{
|
||||
u8 int_enable = readb_relaxed(port->membase + UA_INT_ENABLE);
|
||||
|
||||
int_enable &= ~UA_INT_RX;
|
||||
writeb_relaxed(int_enable, port->membase + UA_INT_ENABLE);
|
||||
}
|
||||
|
||||
static void digicolor_rx_poll(struct work_struct *work)
|
||||
{
|
||||
struct digicolor_port *dp =
|
||||
container_of(to_delayed_work(work),
|
||||
struct digicolor_port, rx_poll_work);
|
||||
|
||||
if (!digicolor_uart_rx_empty(&dp->port))
|
||||
/* force RX interrupt */
|
||||
writeb_relaxed(UA_INT_RX, dp->port.membase + UA_INTFLAG_SET);
|
||||
|
||||
schedule_delayed_work(&dp->rx_poll_work, msecs_to_jiffies(100));
|
||||
}
|
||||
|
||||
static void digicolor_uart_rx(struct uart_port *port)
|
||||
{
|
||||
unsigned long flags;
|
||||
|
||||
spin_lock_irqsave(&port->lock, flags);
|
||||
|
||||
while (1) {
|
||||
u8 status, ch;
|
||||
unsigned int ch_flag;
|
||||
|
||||
if (digicolor_uart_rx_empty(port))
|
||||
break;
|
||||
|
||||
ch = readb_relaxed(port->membase + UA_EMI_REC);
|
||||
status = readb_relaxed(port->membase + UA_STATUS);
|
||||
|
||||
port->icount.rx++;
|
||||
ch_flag = TTY_NORMAL;
|
||||
|
||||
if (status) {
|
||||
if (status & UA_STATUS_PARITY_ERR)
|
||||
port->icount.parity++;
|
||||
else if (status & UA_STATUS_FRAME_ERR)
|
||||
port->icount.frame++;
|
||||
else if (status & UA_STATUS_OVERRUN_ERR)
|
||||
port->icount.overrun++;
|
||||
|
||||
status &= port->read_status_mask;
|
||||
|
||||
if (status & UA_STATUS_PARITY_ERR)
|
||||
ch_flag = TTY_PARITY;
|
||||
else if (status & UA_STATUS_FRAME_ERR)
|
||||
ch_flag = TTY_FRAME;
|
||||
else if (status & UA_STATUS_OVERRUN_ERR)
|
||||
ch_flag = TTY_OVERRUN;
|
||||
}
|
||||
|
||||
if (uart_handle_sysrq_char(port, ch))
|
||||
continue;
|
||||
|
||||
if (status & port->ignore_status_mask)
|
||||
continue;
|
||||
|
||||
uart_insert_char(port, status, UA_STATUS_OVERRUN_ERR, ch,
|
||||
ch_flag);
|
||||
}
|
||||
|
||||
spin_unlock_irqrestore(&port->lock, flags);
|
||||
|
||||
tty_flip_buffer_push(&port->state->port);
|
||||
}
|
||||
|
||||
static void digicolor_uart_tx(struct uart_port *port)
|
||||
{
|
||||
struct circ_buf *xmit = &port->state->xmit;
|
||||
unsigned long flags;
|
||||
|
||||
if (digicolor_uart_tx_full(port))
|
||||
return;
|
||||
|
||||
spin_lock_irqsave(&port->lock, flags);
|
||||
|
||||
if (port->x_char) {
|
||||
writeb_relaxed(port->x_char, port->membase + UA_EMI_REC);
|
||||
port->icount.tx++;
|
||||
port->x_char = 0;
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
|
||||
digicolor_uart_stop_tx(port);
|
||||
goto out;
|
||||
}
|
||||
|
||||
while (!uart_circ_empty(xmit)) {
|
||||
writeb(xmit->buf[xmit->tail], port->membase + UA_EMI_REC);
|
||||
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
||||
port->icount.tx++;
|
||||
|
||||
if (digicolor_uart_tx_full(port))
|
||||
break;
|
||||
}
|
||||
|
||||
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
||||
uart_write_wakeup(port);
|
||||
|
||||
out:
|
||||
spin_unlock_irqrestore(&port->lock, flags);
|
||||
}
|
||||
|
||||
static irqreturn_t digicolor_uart_int(int irq, void *dev_id)
|
||||
{
|
||||
struct uart_port *port = dev_id;
|
||||
u8 int_status = readb_relaxed(port->membase + UA_INT_STATUS);
|
||||
|
||||
writeb_relaxed(UA_INT_RX | UA_INT_TX,
|
||||
port->membase + UA_INTFLAG_CLEAR);
|
||||
|
||||
if (int_status & UA_INT_RX)
|
||||
digicolor_uart_rx(port);
|
||||
if (int_status & UA_INT_TX)
|
||||
digicolor_uart_tx(port);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static unsigned int digicolor_uart_tx_empty(struct uart_port *port)
|
||||
{
|
||||
u8 status = readb_relaxed(port->membase + UA_STATUS);
|
||||
|
||||
return (status & UA_STATUS_TX_READY) ? TIOCSER_TEMT : 0;
|
||||
}
|
||||
|
||||
static unsigned int digicolor_uart_get_mctrl(struct uart_port *port)
|
||||
{
|
||||
return TIOCM_CTS;
|
||||
}
|
||||
|
||||
static void digicolor_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
||||
{
|
||||
}
|
||||
|
||||
static void digicolor_uart_break_ctl(struct uart_port *port, int state)
|
||||
{
|
||||
}
|
||||
|
||||
static int digicolor_uart_startup(struct uart_port *port)
|
||||
{
|
||||
struct digicolor_port *dp =
|
||||
container_of(port, struct digicolor_port, port);
|
||||
|
||||
writeb_relaxed(UA_ENABLE_ENABLE, port->membase + UA_ENABLE);
|
||||
writeb_relaxed(UA_CONTROL_SOFT_RESET, port->membase + UA_CONTROL);
|
||||
writeb_relaxed(0, port->membase + UA_CONTROL);
|
||||
|
||||
writeb_relaxed(UA_CONFIG_FIFO_RX_FIFO_MODE
|
||||
| UA_CONFIG_FIFO_TX_FIFO_MODE | UA_CONFIG_FIFO_RX_THRESH,
|
||||
port->membase + UA_CONFIG_FIFO);
|
||||
writeb_relaxed(UA_STATUS_FIFO_RX_INT_ALMOST,
|
||||
port->membase + UA_STATUS_FIFO);
|
||||
writeb_relaxed(UA_CONTROL_RX_ENABLE | UA_CONTROL_TX_ENABLE,
|
||||
port->membase + UA_CONTROL);
|
||||
writeb_relaxed(UA_INT_TX | UA_INT_RX,
|
||||
port->membase + UA_INT_ENABLE);
|
||||
|
||||
schedule_delayed_work(&dp->rx_poll_work, msecs_to_jiffies(100));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void digicolor_uart_shutdown(struct uart_port *port)
|
||||
{
|
||||
struct digicolor_port *dp =
|
||||
container_of(port, struct digicolor_port, port);
|
||||
|
||||
writeb_relaxed(0, port->membase + UA_ENABLE);
|
||||
cancel_delayed_work_sync(&dp->rx_poll_work);
|
||||
}
|
||||
|
||||
static void digicolor_uart_set_termios(struct uart_port *port,
|
||||
struct ktermios *termios,
|
||||
struct ktermios *old)
|
||||
{
|
||||
unsigned int baud, divisor;
|
||||
u8 config = 0;
|
||||
unsigned long flags;
|
||||
|
||||
/* Mask termios capabilities we don't support */
|
||||
termios->c_cflag &= ~CMSPAR;
|
||||
termios->c_iflag &= ~(BRKINT | IGNBRK);
|
||||
|
||||
/* Limit baud rates so that we don't need the fractional divider */
|
||||
baud = uart_get_baud_rate(port, termios, old,
|
||||
port->uartclk / (0x10000*16),
|
||||
port->uartclk / 256);
|
||||
divisor = uart_get_divisor(port, baud) - 1;
|
||||
|
||||
switch (termios->c_cflag & CSIZE) {
|
||||
case CS7:
|
||||
break;
|
||||
case CS8:
|
||||
default:
|
||||
config |= UA_CONFIG_CHAR_LEN;
|
||||
break;
|
||||
}
|
||||
|
||||
if (termios->c_cflag & CSTOPB)
|
||||
config |= UA_CONFIG_STOP_BITS;
|
||||
|
||||
if (termios->c_cflag & PARENB) {
|
||||
config |= UA_CONFIG_PARITY;
|
||||
if (termios->c_cflag & PARODD)
|
||||
config |= UA_CONFIG_ODD_PARITY;
|
||||
}
|
||||
|
||||
/* Set read status mask */
|
||||
port->read_status_mask = UA_STATUS_OVERRUN_ERR;
|
||||
if (termios->c_iflag & INPCK)
|
||||
port->read_status_mask |= UA_STATUS_PARITY_ERR
|
||||
| UA_STATUS_FRAME_ERR;
|
||||
|
||||
/* Set status ignore mask */
|
||||
port->ignore_status_mask = 0;
|
||||
if (!(termios->c_cflag & CREAD))
|
||||
port->ignore_status_mask |= UA_STATUS_OVERRUN_ERR
|
||||
| UA_STATUS_PARITY_ERR | UA_STATUS_FRAME_ERR;
|
||||
|
||||
spin_lock_irqsave(&port->lock, flags);
|
||||
|
||||
uart_update_timeout(port, termios->c_cflag, baud);
|
||||
|
||||
writeb_relaxed(config, port->membase + UA_CONFIG);
|
||||
writeb_relaxed(divisor & 0xff, port->membase + UA_HBAUD_LO);
|
||||
writeb_relaxed(divisor >> 8, port->membase + UA_HBAUD_HI);
|
||||
|
||||
spin_unlock_irqrestore(&port->lock, flags);
|
||||
}
|
||||
|
||||
static const char *digicolor_uart_type(struct uart_port *port)
|
||||
{
|
||||
return (port->type == PORT_DIGICOLOR) ? "DIGICOLOR USART" : NULL;
|
||||
}
|
||||
|
||||
static void digicolor_uart_config_port(struct uart_port *port, int flags)
|
||||
{
|
||||
if (flags & UART_CONFIG_TYPE)
|
||||
port->type = PORT_DIGICOLOR;
|
||||
}
|
||||
|
||||
static void digicolor_uart_release_port(struct uart_port *port)
|
||||
{
|
||||
}
|
||||
|
||||
static int digicolor_uart_request_port(struct uart_port *port)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct uart_ops digicolor_uart_ops = {
|
||||
.tx_empty = digicolor_uart_tx_empty,
|
||||
.set_mctrl = digicolor_uart_set_mctrl,
|
||||
.get_mctrl = digicolor_uart_get_mctrl,
|
||||
.stop_tx = digicolor_uart_stop_tx,
|
||||
.start_tx = digicolor_uart_start_tx,
|
||||
.stop_rx = digicolor_uart_stop_rx,
|
||||
.break_ctl = digicolor_uart_break_ctl,
|
||||
.startup = digicolor_uart_startup,
|
||||
.shutdown = digicolor_uart_shutdown,
|
||||
.set_termios = digicolor_uart_set_termios,
|
||||
.type = digicolor_uart_type,
|
||||
.config_port = digicolor_uart_config_port,
|
||||
.release_port = digicolor_uart_release_port,
|
||||
.request_port = digicolor_uart_request_port,
|
||||
};
|
||||
|
||||
static void digicolor_uart_console_putchar(struct uart_port *port, int ch)
|
||||
{
|
||||
while (digicolor_uart_tx_full(port))
|
||||
cpu_relax();
|
||||
|
||||
writeb_relaxed(ch, port->membase + UA_EMI_REC);
|
||||
}
|
||||
|
||||
static void digicolor_uart_console_write(struct console *co, const char *c,
|
||||
unsigned n)
|
||||
{
|
||||
struct uart_port *port = digicolor_ports[co->index];
|
||||
u8 status;
|
||||
unsigned long flags;
|
||||
int locked = 1;
|
||||
|
||||
if (port->sysrq || oops_in_progress)
|
||||
locked = spin_trylock_irqsave(&port->lock, flags);
|
||||
else
|
||||
spin_lock_irqsave(&port->lock, flags);
|
||||
|
||||
uart_console_write(port, c, n, digicolor_uart_console_putchar);
|
||||
|
||||
if (locked)
|
||||
spin_unlock_irqrestore(&port->lock, flags);
|
||||
|
||||
/* Wait for transmitter to become empty */
|
||||
do {
|
||||
status = readb_relaxed(port->membase + UA_STATUS);
|
||||
} while ((status & UA_STATUS_TX_READY) == 0);
|
||||
}
|
||||
|
||||
static int digicolor_uart_console_setup(struct console *co, char *options)
|
||||
{
|
||||
int baud = 115200, bits = 8, parity = 'n', flow = 'n';
|
||||
struct uart_port *port;
|
||||
|
||||
if (co->index < 0 || co->index >= DIGICOLOR_USART_NR)
|
||||
return -EINVAL;
|
||||
|
||||
port = digicolor_ports[co->index];
|
||||
if (!port)
|
||||
return -ENODEV;
|
||||
|
||||
if (options)
|
||||
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
||||
|
||||
return uart_set_options(port, co, baud, parity, bits, flow);
|
||||
}
|
||||
|
||||
static struct console digicolor_console = {
|
||||
.name = "ttyS",
|
||||
.device = uart_console_device,
|
||||
.write = digicolor_uart_console_write,
|
||||
.setup = digicolor_uart_console_setup,
|
||||
.flags = CON_PRINTBUFFER,
|
||||
.index = -1,
|
||||
};
|
||||
|
||||
static struct uart_driver digicolor_uart = {
|
||||
.driver_name = "digicolor-usart",
|
||||
.dev_name = "ttyS",
|
||||
.nr = DIGICOLOR_USART_NR,
|
||||
};
|
||||
|
||||
static int digicolor_uart_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device_node *np = pdev->dev.of_node;
|
||||
int ret, index;
|
||||
struct digicolor_port *dp;
|
||||
struct resource *res;
|
||||
struct clk *uart_clk;
|
||||
|
||||
if (!np) {
|
||||
dev_err(&pdev->dev, "Missing device tree node\n");
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
index = of_alias_get_id(np, "serial");
|
||||
if (index < 0 || index >= DIGICOLOR_USART_NR)
|
||||
return -EINVAL;
|
||||
|
||||
dp = devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
|
||||
if (!dp)
|
||||
return -ENOMEM;
|
||||
|
||||
uart_clk = devm_clk_get(&pdev->dev, NULL);
|
||||
if (IS_ERR(uart_clk))
|
||||
return PTR_ERR(uart_clk);
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
dp->port.mapbase = res->start;
|
||||
dp->port.membase = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(dp->port.membase))
|
||||
return PTR_ERR(dp->port.membase);
|
||||
|
||||
dp->port.irq = platform_get_irq(pdev, 0);
|
||||
if (IS_ERR_VALUE(dp->port.irq))
|
||||
return dp->port.irq;
|
||||
|
||||
dp->port.iotype = UPIO_MEM;
|
||||
dp->port.uartclk = clk_get_rate(uart_clk);
|
||||
dp->port.fifosize = 16;
|
||||
dp->port.dev = &pdev->dev;
|
||||
dp->port.ops = &digicolor_uart_ops;
|
||||
dp->port.line = index;
|
||||
dp->port.type = PORT_DIGICOLOR;
|
||||
spin_lock_init(&dp->port.lock);
|
||||
|
||||
digicolor_ports[index] = &dp->port;
|
||||
platform_set_drvdata(pdev, &dp->port);
|
||||
|
||||
INIT_DELAYED_WORK(&dp->rx_poll_work, digicolor_rx_poll);
|
||||
|
||||
ret = devm_request_irq(&pdev->dev, dp->port.irq, digicolor_uart_int, 0,
|
||||
dev_name(&pdev->dev), &dp->port);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return uart_add_one_port(&digicolor_uart, &dp->port);
|
||||
}
|
||||
|
||||
static int digicolor_uart_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct uart_port *port = platform_get_drvdata(pdev);
|
||||
|
||||
uart_remove_one_port(&digicolor_uart, port);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id digicolor_uart_dt_ids[] = {
|
||||
{ .compatible = "cnxt,cx92755-usart", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, digicolor_uart_dt_ids);
|
||||
|
||||
static struct platform_driver digicolor_uart_platform = {
|
||||
.driver = {
|
||||
.name = "digicolor-usart",
|
||||
.of_match_table = of_match_ptr(digicolor_uart_dt_ids),
|
||||
},
|
||||
.probe = digicolor_uart_probe,
|
||||
.remove = digicolor_uart_remove,
|
||||
};
|
||||
|
||||
static int __init digicolor_uart_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (IS_ENABLED(CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE)) {
|
||||
digicolor_uart.cons = &digicolor_console;
|
||||
digicolor_console.data = &digicolor_uart;
|
||||
}
|
||||
|
||||
ret = uart_register_driver(&digicolor_uart);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return platform_driver_register(&digicolor_uart_platform);
|
||||
}
|
||||
module_init(digicolor_uart_init);
|
||||
|
||||
static void __exit digicolor_uart_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&digicolor_uart_platform);
|
||||
uart_unregister_driver(&digicolor_uart);
|
||||
}
|
||||
module_exit(digicolor_uart_exit);
|
||||
|
||||
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
|
||||
MODULE_DESCRIPTION("Conexant Digicolor USART serial driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -248,4 +248,7 @@
|
|||
/* MESON */
|
||||
#define PORT_MESON 109
|
||||
|
||||
/* Conexant Digicolor */
|
||||
#define PORT_DIGICOLOR 110
|
||||
|
||||
#endif /* _UAPILINUX_SERIAL_CORE_H */
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user