AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Merge branch 'mlx5_active_speed' into rdma.git for-next

Browse Source 
Leon Romanovsky says:

====================
IBTA declares speed as 16 bits, but kernel stores it in u8. This series
fixes in-kernel declaration while keeping external interface intact.
====================

Based on the mlx5-next branch at
     git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.

* branch 'mlx5_active_speed':
  RDMA: Fix link active_speed size
  RDMA/mlx5: Delete duplicated mlx5_ptys_width enum
  net/mlx5: Refactor query port speed functions
This commit is contained in:
Jason Gunthorpe 2020-09-17 15:12:22 -03:00
commit 5dee5872f8
598 changed files with 5529 additions and 2778 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
.clang-format
View File

@ -111,6 +111,7 @@ ForEachMacros:
- 'css_for_each_descendant_pre'
- 'device_for_each_child_node'
- 'dma_fence_chain_for_each'
- 'do_for_each_ftrace_op'
- 'drm_atomic_crtc_for_each_plane'
- 'drm_atomic_crtc_state_for_each_plane'
- 'drm_atomic_crtc_state_for_each_plane_state'
@ -136,6 +137,7 @@ ForEachMacros:
- 'for_each_active_dev_scope'
- 'for_each_active_drhd_unit'
- 'for_each_active_iommu'
- 'for_each_aggr_pgid'
- 'for_each_available_child_of_node'
- 'for_each_bio'
- 'for_each_board_func_rsrc'
@ -234,6 +236,7 @@ ForEachMacros:
- 'for_each_node_state'
- 'for_each_node_with_cpus'
- 'for_each_node_with_property'
- 'for_each_nonreserved_multicast_dest_pgid'
- 'for_each_of_allnodes'
- 'for_each_of_allnodes_from'
- 'for_each_of_cpu_node'
@ -256,6 +259,7 @@ ForEachMacros:
- 'for_each_pci_dev'
- 'for_each_pci_msi_entry'
- 'for_each_pcm_streams'
- 'for_each_physmem_range'
- 'for_each_populated_zone'
- 'for_each_possible_cpu'
- 'for_each_present_cpu'
@ -265,6 +269,8 @@ ForEachMacros:
- 'for_each_process_thread'
- 'for_each_property_of_node'
- 'for_each_registered_fb'
- 'for_each_requested_gpio'
- 'for_each_requested_gpio_in_range'
- 'for_each_reserved_mem_region'
- 'for_each_rtd_codec_dais'
- 'for_each_rtd_codec_dais_rollback'
@ -278,12 +284,17 @@ ForEachMacros:
- 'for_each_sg'
- 'for_each_sg_dma_page'
- 'for_each_sg_page'
- 'for_each_sgtable_dma_page'
- 'for_each_sgtable_dma_sg'
- 'for_each_sgtable_page'
- 'for_each_sgtable_sg'
- 'for_each_sibling_event'
- 'for_each_subelement'
- 'for_each_subelement_extid'
- 'for_each_subelement_id'
- '__for_each_thread'
- 'for_each_thread'
- 'for_each_unicast_dest_pgid'
- 'for_each_wakeup_source'
- 'for_each_zone'
- 'for_each_zone_zonelist'
@ -465,6 +476,7 @@ ForEachMacros:
- 'v4l2_m2m_for_each_src_buf'
- 'v4l2_m2m_for_each_src_buf_safe'
- 'virtio_device_for_each_vq'
- 'while_for_each_ftrace_op'
- 'xa_for_each'
- 'xa_for_each_marked'
- 'xa_for_each_range'

1
.mailmap
View File

@ -308,6 +308,7 @@ Tony Luck <tony.luck@intel.com>
TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>
TripleX Chung <xxx.phy@gmail.com> <zhongyu@18mail.cn>
Tsuneo Yoshioka <Tsuneo.Yoshioka@f-secure.com>
Tycho Andersen <tycho@tycho.pizza> <tycho@tycho.ws>
Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>

2
Documentation/RCU/lockdep.rst
View File

@ -49,7 +49,7 @@ checking of rcu_dereference() primitives:
is invoked by both RCU-sched readers and updaters.
srcu_dereference_check(p, c):
Use explicit check expression "c" along with
srcu_read_lock_held()(). This is useful in code that
srcu_read_lock_held(). This is useful in code that
is invoked by both SRCU readers and updaters.
rcu_dereference_raw(p):
Don't check. (Use sparingly, if at all.)

2
Documentation/admin-guide/devices.txt
View File

@ -1662,7 +1662,7 @@
98 block User-mode virtual block device
0 = /dev/ubda First user-mode block device
16 = /dev/udbb Second user-mode block device
16 = /dev/ubdb Second user-mode block device
...
Partitions are handled in the same way as for IDE

1
Documentation/admin-guide/dynamic-debug-howto.rst
View File

@ -156,7 +156,6 @@ against. Possible keywords are:::
``line-range`` cannot contain space, e.g.
"1-30" is valid range but "1 - 30" is not.
``module=foo`` combined keyword=value form is interchangably accepted
The meanings of each keyword are:

2
Documentation/admin-guide/laptops/thinkpad-acpi.rst
View File

@ -1434,7 +1434,7 @@ on the feature, restricting the viewing angles.
DYTC Lapmode sensor
------------------
-------------------
sysfs: dytc_lapmode

4
Documentation/admin-guide/pm/intel_pstate.rst
View File

@ -123,7 +123,9 @@ Energy-Performance Bias (EPB) knob (otherwise), which means that the processor's
internal P-state selection logic is expected to focus entirely on performance.
This will override the EPP/EPB setting coming from the ``sysfs`` interface
(see `Energy vs Performance Hints`_ below).
(see `Energy vs Performance Hints`_ below). Moreover, any attempts to change
the EPP/EPB to a value different from 0 ("performance") via ``sysfs`` in this
configuration will be rejected.
Also, in this configuration the range of P-states available to the processor's
internal P-state selection logic is always restricted to the upper boundary

6
Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
View File

@ -30,9 +30,13 @@ allOf:
then:
properties:
clock-output-names:
items:
oneOf:
- items:
- const: clk_out_sd0
- const: clk_in_sd0
- items:
- const: clk_out_sd1
- const: clk_in_sd1
properties:
compatible:

2
Documentation/devicetree/bindings/mmc/mtk-sd.txt
View File

@ -50,6 +50,8 @@ Optional properties:
error caused by stop clock(fifo full)
Valid range = [0:0x7]. if not present, default value is 0.
applied to compatible "mediatek,mt2701-mmc".
- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
- reset-names: Should be "hrst".
Examples:
mmc0: mmc@11230000 {

32
Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
View File

@ -15,8 +15,15 @@ Required properties:
- "nvidia,tegra210-sdhci": for Tegra210
- "nvidia,tegra186-sdhci": for Tegra186
- "nvidia,tegra194-sdhci": for Tegra194
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries.
One for the module clock and one for the timeout clock.
For all other Tegra devices, must contain a single entry for
the module clock. See ../clocks/clock-bindings.txt for details.
- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the
strings 'sdhci' and 'tmclk' to represent the module and
the timeout clocks, respectively.
For all other Tegra devices must contain the string 'sdhci'
to represent the module clock.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
@ -99,7 +106,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194:
Example:
sdhci@700b0000 {
compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
compatible = "nvidia,tegra124-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
@ -115,3 +122,22 @@ sdhci@700b0000 {
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
status = "disabled";
};
sdhci@700b0000 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 14>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
pinctrl-0 = <&sdmmc1_3v3>;
pinctrl-1 = <&sdmmc1_1v8>;
nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
status = "disabled";
};

2
Documentation/devicetree/bindings/net/dsa/dsa.txt
View File

@ -1,4 +1,4 @@
Distributed Switch Architecture Device Tree Bindings
----------------------------------------------------
See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documenation.
See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation.

16
Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.txt
View File

@ -23,8 +23,8 @@ Required properties:
- compatible:
Must be one of :
"brcm,spi-bcm-qspi", "brcm,spi-brcmstb-qspi" : MSPI+BSPI on BRCMSTB SoCs
"brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
"brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on BRCMSTB SoCs
"brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm7425-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
@ -36,8 +36,8 @@ Required properties:
BRCMSTB SoCs
"brcm,spi-bcm7278-qspi", "brcm,spi-bcm-qspi", "brcm,spi-brcmstb-mspi" : Second Instance of MSPI
BRCMSTB SoCs
"brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi" : MSPI+BSPI on Cygnus, NSP
"brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi" : NS2 SoCs
"brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi" : MSPI+BSPI on Cygnus, NSP
"brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi" : NS2 SoCs
- reg:
Define the bases and ranges of the associated I/O address spaces.
@ -86,7 +86,7 @@ BRCMSTB SoC Example:
spi@f03e3400 {
#address-cells = <0x1>;
#size-cells = <0x0>;
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-qspi";
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-bcm-qspi";
reg = <0xf03e0920 0x4 0xf03e3400 0x188 0xf03e3200 0x50>;
reg-names = "cs_reg", "mspi", "bspi";
interrupts = <0x6 0x5 0x4 0x3 0x2 0x1 0x0>;
@ -149,7 +149,7 @@ BRCMSTB SoC Example:
#address-cells = <1>;
#size-cells = <0>;
clocks = <&upg_fixed>;
compatible = "brcm,spi-brcmstb-qspi", "brcm,spi-brcmstb-mspi";
compatible = "brcm,spi-brcmstb-mspi", "brcm,spi-bcm-qspi";
reg = <0xf0416000 0x180>;
reg-names = "mspi";
interrupts = <0x14>;
@ -160,7 +160,7 @@ BRCMSTB SoC Example:
iProc SoC Example:
qspi: spi@18027200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x18027200 0x184>,
<0x18027000 0x124>,
<0x1811c408 0x004>,
@ -191,7 +191,7 @@ iProc SoC Example:
NS2 SoC Example:
qspi: spi@66470200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
reg = <0x66470200 0x184>,
<0x66470000 0x124>,
<0x67017408 0x004>,

2
Documentation/driver-api/dma-buf.rst
View File

@ -179,7 +179,7 @@ DMA Fence uABI/Sync File
:internal:
Indefinite DMA Fences
~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~
At various times &dma_fence with an indefinite time until dma_fence_wait()
finishes have been proposed. Examples include:

6
Documentation/driver-api/fpga/fpga-bridge.rst
View File

@ -6,9 +6,9 @@ API to implement a new FPGA bridge
* struct :c:type:`fpga_bridge` — The FPGA Bridge structure
* struct :c:type:`fpga_bridge_ops` — Low level Bridge driver ops
* :c:func:`devm_fpga_bridge_create()` — Allocate and init a bridge struct
* :c:func:`fpga_bridge_register()` — Register a bridge
* :c:func:`fpga_bridge_unregister()` — Unregister a bridge
* devm_fpga_bridge_create() — Allocate and init a bridge struct
* fpga_bridge_register() — Register a bridge
* fpga_bridge_unregister() — Unregister a bridge
.. kernel-doc:: include/linux/fpga/fpga-bridge.h
:functions: fpga_bridge

6
Documentation/driver-api/fpga/fpga-mgr.rst
View File

@ -104,9 +104,9 @@ API for implementing a new FPGA Manager driver
* ``fpga_mgr_states`` — Values for :c:member:`fpga_manager->state`.
* struct :c:type:`fpga_manager` — the FPGA manager struct
* struct :c:type:`fpga_manager_ops` — Low level FPGA manager driver ops
* :c:func:`devm_fpga_mgr_create` — Allocate and init a manager struct
* :c:func:`fpga_mgr_register` — Register an FPGA manager
* :c:func:`fpga_mgr_unregister` — Unregister an FPGA manager
* devm_fpga_mgr_create() — Allocate and init a manager struct
* fpga_mgr_register() — Register an FPGA manager
* fpga_mgr_unregister() — Unregister an FPGA manager
.. kernel-doc:: include/linux/fpga/fpga-mgr.h
:functions: fpga_mgr_states

16
Documentation/driver-api/fpga/fpga-programming.rst
View File

@ -6,9 +6,9 @@ Overview
The in-kernel API for FPGA programming is a combination of APIs from
FPGA manager, bridge, and regions. The actual function used to
trigger FPGA programming is :c:func:`fpga_region_program_fpga()`.
trigger FPGA programming is fpga_region_program_fpga().
:c:func:`fpga_region_program_fpga()` uses functionality supplied by
fpga_region_program_fpga() uses functionality supplied by
the FPGA manager and bridges. It will:
* lock the region's mutex
@ -20,8 +20,8 @@ the FPGA manager and bridges. It will:
* release the locks
The struct fpga_image_info specifies what FPGA image to program. It is
allocated/freed by :c:func:`fpga_image_info_alloc()` and freed with
:c:func:`fpga_image_info_free()`
allocated/freed by fpga_image_info_alloc() and freed with
fpga_image_info_free()
How to program an FPGA using a region
-------------------------------------
@ -84,10 +84,10 @@ will generate that list. Here's some sample code of what to do next::
API for programming an FPGA
---------------------------
* :c:func:`fpga_region_program_fpga` — Program an FPGA
* :c:type:`fpga_image_info` — Specifies what FPGA image to program
* :c:func:`fpga_image_info_alloc()` — Allocate an FPGA image info struct
* :c:func:`fpga_image_info_free()` — Free an FPGA image info struct
* fpga_region_program_fpga() — Program an FPGA
* fpga_image_info() — Specifies what FPGA image to program
* fpga_image_info_alloc() — Allocate an FPGA image info struct
* fpga_image_info_free() — Free an FPGA image info struct
.. kernel-doc:: drivers/fpga/fpga-region.c
:functions: fpga_region_program_fpga

18
Documentation/driver-api/fpga/fpga-region.rst
View File

@ -46,18 +46,18 @@ API to add a new FPGA region
----------------------------
* struct :c:type:`fpga_region` — The FPGA region struct
* :c:func:`devm_fpga_region_create` — Allocate and init a region struct
* :c:func:`fpga_region_register` — Register an FPGA region
* :c:func:`fpga_region_unregister` — Unregister an FPGA region
* devm_fpga_region_create() — Allocate and init a region struct
* fpga_region_register() — Register an FPGA region
* fpga_region_unregister() — Unregister an FPGA region
The FPGA region's probe function will need to get a reference to the FPGA
Manager it will be using to do the programming. This usually would happen
during the region's probe function.
* :c:func:`fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count
* :c:func:`of_fpga_mgr_get` — Get a reference to an FPGA manager, raise ref count,
* fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count
* of_fpga_mgr_get() — Get a reference to an FPGA manager, raise ref count,
given a device node.
* :c:func:`fpga_mgr_put` — Put an FPGA manager
* fpga_mgr_put() — Put an FPGA manager
The FPGA region will need to specify which bridges to control while programming
the FPGA. The region driver can build a list of bridges during probe time
@ -66,11 +66,11 @@ the list of bridges to program just before programming
(:c:member:`fpga_region->get_bridges`). The FPGA bridge framework supplies the
following APIs to handle building or tearing down that list.
* :c:func:`fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
* fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
list
* :c:func:`of_fpga_bridge_get_to_list` — Get a ref of an FPGA bridge, add it to a
* of_fpga_bridge_get_to_list() — Get a ref of an FPGA bridge, add it to a
list, given a device node
* :c:func:`fpga_bridges_put` — Given a list of bridges, put them
* fpga_bridges_put() — Given a list of bridges, put them
.. kernel-doc:: include/linux/fpga/fpga-region.h
:functions: fpga_region

16
Documentation/driver-api/iio/core.rst
View File

@ -11,10 +11,10 @@ Industrial I/O Devices
----------------------
* struct :c:type:`iio_dev` - industrial I/O device
* :c:func:`iio_device_alloc()` - allocate an :c:type:`iio_dev` from a driver
* :c:func:`iio_device_free()` - free an :c:type:`iio_dev` from a driver
* :c:func:`iio_device_register()` - register a device with the IIO subsystem
* :c:func:`iio_device_unregister()` - unregister a device from the IIO
* iio_device_alloc() - allocate an :c:type:`iio_dev` from a driver
* iio_device_free() - free an :c:type:`iio_dev` from a driver
* iio_device_register() - register a device with the IIO subsystem
* iio_device_unregister() - unregister a device from the IIO
subsystem
An IIO device usually corresponds to a single hardware sensor and it
@ -34,17 +34,17 @@ A typical IIO driver will register itself as an :doc:`I2C <../i2c>` or
At probe:
1. Call :c:func:`iio_device_alloc()`, which allocates memory for an IIO device.
1. Call iio_device_alloc(), which allocates memory for an IIO device.
2. Initialize IIO device fields with driver specific information (e.g.
device name, device channels).
3. Call :c:func:`iio_device_register()`, this registers the device with the
3. Call iio_device_register(), this registers the device with the
IIO core. After this call the device is ready to accept requests from user
space applications.
At remove, we free the resources allocated in probe in reverse order:
1. :c:func:`iio_device_unregister()`, unregister the device from the IIO core.
2. :c:func:`iio_device_free()`, free the memory allocated for the IIO device.
1. iio_device_unregister(), unregister the device from the IIO core.
2. iio_device_free(), free the memory allocated for the IIO device.
IIO device sysfs interface
==========================

16
Documentation/filesystems/affs.rst
View File

@ -110,13 +110,15 @@ The Amiga protection flags RWEDRWEDHSPARWED are handled as follows:
- R maps to r for user, group and others. On directories, R implies x.
- If both W and D are allowed, w will be set.
- W maps to w.
- E maps to x.
- H and P are always retained and ignored under Linux.
- D is ignored.
- A is always reset when a file is written to.
- H, S and P are always retained and ignored under Linux.
- A is cleared when a file is written to.
User id and group id will be used unless set[gu]id are given as mount
options. Since most of the Amiga file systems are single user systems
@ -128,11 +130,13 @@ Linux -> Amiga:
The Linux rwxrwxrwx file mode is handled as follows:
- r permission will set R for user, group and others.
- r permission will allow R for user, group and others.
- w permission will set W and D for user, group and others.
- w permission will allow W for user, group and others.
- x permission of the user will set E for plain files.
- x permission of the user will allow E for plain files.
- D will be allowed for user, group and others.
- All other flags (suid, sgid, ...) are ignored and will
not be retained.

6
Documentation/hwmon/abituguru-datasheet.rst
View File

@ -68,7 +68,7 @@ See below for all known bank addresses, numbers of sensors in that bank,
number of bytes data per sensor and contents/meaning of those bytes.
Although both this document and the kernel driver have kept the sensor
terminoligy for the addressing within a bank this is not 100% correct, in
terminology for the addressing within a bank this is not 100% correct, in
bank 0x24 for example the addressing within the bank selects a PWM output not
a sensor.
@ -155,7 +155,7 @@ After wider testing of the Linux kernel driver some variants of the uGuru have
turned up which do not hold 0x08 at DATA within 250 reads after writing the
bank address. With these versions this happens quite frequent, using larger
timeouts doesn't help, they just go offline for a second or 2, doing some
internal callibration or whatever. Your code should be prepared to handle
internal calibration or whatever. Your code should be prepared to handle
this and in case of no response in this specific case just goto sleep for a
while and then retry.
@ -331,6 +331,6 @@ the voltage / clock programming out, I tried reading and only reading banks
0-0x30 with the reading code used for the sensor banks (0x20-0x28) and this
resulted in a _permanent_ reprogramming of the voltages, luckily I had the
sensors part configured so that it would shutdown my system on any out of spec
voltages which proprably safed my computer (after a reboot I managed to
voltages which probably safed my computer (after a reboot I managed to
immediately enter the bios and reload the defaults). This probably means that
the read/write cycle for the non sensor part is different from the sensor part.

4
Documentation/hwmon/abituguru.rst
View File

@ -17,7 +17,7 @@ Supported chips:
Note:
The uGuru is a microcontroller with onboard firmware which programs
it to behave as a hwmon IC. There are many different revisions of the
firmware and thus effectivly many different revisions of the uGuru.
firmware and thus effectively many different revisions of the uGuru.
Below is an incomplete list with which revisions are used for which
Motherboards:
@ -33,7 +33,7 @@ Supported chips:
sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
this does not always work. For these uGuru's the autodetection can
be overridden with the bank1_types module param. For all 3 known
revison 1 motherboards the correct use of this param is:
revision 1 motherboards the correct use of this param is:
bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
You may also need to specify the fan_sensors option for these boards
fan_sensors=5

4
Documentation/hwmon/abituguru3.rst
View File

@ -13,7 +13,7 @@ Supported chips:
Note:
The uGuru is a microcontroller with onboard firmware which programs
it to behave as a hwmon IC. There are many different revisions of the
firmware and thus effectivly many different revisions of the uGuru.
firmware and thus effectively many different revisions of the uGuru.
Below is an incomplete list with which revisions are used for which
Motherboards:
@ -24,7 +24,7 @@ Supported chips:
- uGuru 3.0.0.0 ~ 3.0.x.x (AW8, AL8, AT8, NI8 SLI, AT8 32X, AN8 32X,
AW9D-MAX)
The abituguru3 driver is only for revison 3.0.x.x motherboards,
The abituguru3 driver is only for revision 3.0.x.x motherboards,
this driver will not work on older motherboards. For older
motherboards use the abituguru (without the 3 !) driver.

26
Documentation/kbuild/llvm.rst
View File

@ -23,8 +23,8 @@ supports C and the GNU C extensions required by the kernel, and is pronounced
Clang
-----
The compiler used can be swapped out via `CC=` command line argument to `make`.
`CC=` should be set when selecting a config and during a build.
The compiler used can be swapped out via ``CC=`` command line argument to ``make``.
``CC=`` should be set when selecting a config and during a build. ::
make CC=clang defconfig
@ -34,33 +34,33 @@ Cross Compiling
---------------
A single Clang compiler binary will typically contain all supported backends,
which can help simplify cross compiling.
which can help simplify cross compiling. ::
ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- make CC=clang
`CROSS_COMPILE` is not used to prefix the Clang compiler binary, instead
`CROSS_COMPILE` is used to set a command line flag: `--target <triple>`. For
example:
``CROSS_COMPILE`` is not used to prefix the Clang compiler binary, instead
``CROSS_COMPILE`` is used to set a command line flag: ``--target <triple>``. For
example: ::
clang --target aarch64-linux-gnu foo.c
LLVM Utilities
--------------
LLVM has substitutes for GNU binutils utilities. Kbuild supports `LLVM=1`
to enable them.
LLVM has substitutes for GNU binutils utilities. Kbuild supports ``LLVM=1``
to enable them. ::
make LLVM=1
They can be enabled individually. The full list of the parameters:
They can be enabled individually. The full list of the parameters: ::
make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \\
OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \\
READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \\
make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \
OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size \
READELF=llvm-readelf HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar \
HOSTLD=ld.lld
Currently, the integrated assembler is disabled by default. You can pass
`LLVM_IAS=1` to enable it.
``LLVM_IAS=1`` to enable it.
Getting Help
------------

18
Documentation/kbuild/makefiles.rst
View File

@ -16,7 +16,7 @@ This document describes the Linux kernel Makefiles.
--- 3.5 Library file goals - lib-y
--- 3.6 Descending down in directories
--- 3.7 Compilation flags
--- 3.8 Command line dependency
--- 3.8 <deleted>
--- 3.9 Dependency tracking
--- 3.10 Special Rules
--- 3.11 $(CC) support functions
@ -39,8 +39,8 @@ This document describes the Linux kernel Makefiles.
=== 7 Architecture Makefiles
--- 7.1 Set variables to tweak the build to the architecture
--- 7.2 Add prerequisites to archheaders:
--- 7.3 Add prerequisites to archprepare:
--- 7.2 Add prerequisites to archheaders
--- 7.3 Add prerequisites to archprepare
--- 7.4 List directories to visit when descending
--- 7.5 Architecture-specific boot images
--- 7.6 Building non-kbuild targets
@ -129,7 +129,7 @@ The preferred name for the kbuild files are 'Makefile' but 'Kbuild' can
be used and if both a 'Makefile' and a 'Kbuild' file exists, then the 'Kbuild'
file will be used.
Section 3.1 "Goal definitions" is a quick intro, further chapters provide
Section 3.1 "Goal definitions" is a quick intro; further chapters provide
more details, with real examples.
3.1 Goal definitions
@ -965,7 +965,7 @@ When kbuild executes, the following steps are followed (roughly):
KBUILD_LDFLAGS := -m elf_s390
Note: ldflags-y can be used to further customise
the flags used. See chapter 3.7.
the flags used. See section 3.7.
LDFLAGS_vmlinux
Options for $(LD) when linking vmlinux
@ -1121,7 +1121,7 @@ When kbuild executes, the following steps are followed (roughly):
In this example, the file target maketools will be processed
before descending down in the subdirectories.
See also chapter XXX-TODO that describe how kbuild supports
See also chapter XXX-TODO that describes how kbuild supports
generating offset header files.
@ -1261,7 +1261,7 @@ When kbuild executes, the following steps are followed (roughly):
always be built.
Assignments to $(targets) are without $(obj)/ prefix.
if_changed may be used in conjunction with custom commands as
defined in 6.8 "Custom kbuild commands".
defined in 7.8 "Custom kbuild commands".
Note: It is a typical mistake to forget the FORCE prerequisite.
Another common pitfall is that whitespace is sometimes
@ -1411,7 +1411,7 @@ When kbuild executes, the following steps are followed (roughly):
that may be shared between individual architectures.
The recommended approach how to use a generic header file is
to list the file in the Kbuild file.
See "7.2 generic-y" for further info on syntax etc.
See "8.2 generic-y" for further info on syntax etc.
7.11 Post-link pass
-------------------
@ -1601,4 +1601,4 @@ is the right choice.
- Describe how kbuild supports shipped files with _shipped.
- Generating offset header files.
- Add more variables to section 7?
- Add more variables to chapters 7 or 9?

16
Documentation/locking/locktypes.rst
View File

@ -164,14 +164,14 @@ by disabling preemption or interrupts.
On non-PREEMPT_RT kernels local_lock operations map to the preemption and
interrupt disabling and enabling primitives:
=========================== ======================
=============================== ======================
local_lock(&llock) preempt_disable()
local_unlock(&llock) preempt_enable()
local_lock_irq(&llock) local_irq_disable()
local_unlock_irq(&llock) local_irq_enable()
local_lock_save(&llock) local_irq_save()
local_lock_restore(&llock) local_irq_save()
=========================== ======================
local_lock_irqsave(&llock) local_irq_save()
local_unlock_irqrestore(&llock) local_irq_restore()
=============================== ======================
The named scope of local_lock has two advantages over the regular
primitives:
@ -353,14 +353,14 @@ protection scope. So the following substitution is wrong::
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock_1, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_1, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_1, flags);
}
func2()
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock_2, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock_2, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock_2, flags);
}
func3()
@ -379,14 +379,14 @@ PREEMPT_RT-specific semantics of spinlock_t. The correct substitution is::
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
}
func2()
{
local_irq_save(flags); -> local_lock_irqsave(&local_lock, flags);
func3();
local_irq_restore(flags); -> local_lock_irqrestore(&local_lock, flags);
local_irq_restore(flags); -> local_unlock_irqrestore(&local_lock, flags);
}
func3()

1
Documentation/maintainer/maintainer-entry-profile.rst
View File

@ -101,3 +101,4 @@ to do something different in the near future.
../doc-guide/maintainer-profile
../nvdimm/maintainer-entry-profile
../riscv/patch-acceptance

2
Documentation/networking/dsa/configuration.rst
View File

@ -180,7 +180,7 @@ The configuration can only be set up via VLAN tagging and bridge setup.
# bring up the slave interfaces
ip link set lan1 up
ip link set lan1 up
ip link set lan2 up
ip link set lan3 up
# create bridge

2
Documentation/process/deprecated.rst
View File

@ -142,7 +142,7 @@ only NUL-terminated strings. The safe replacement is strscpy().
(Users of strscpy() still needing NUL-padding should instead
use strscpy_pad().)
If a caller is using non-NUL-terminated strings, strncpy()() can
If a caller is using non-NUL-terminated strings, strncpy() can
still be used, but destinations should be marked with the `__nonstring
<https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
attribute to avoid future compiler warnings.

2
Documentation/sound/cards/audigy-mixer.rst
View File

@ -332,7 +332,7 @@ WO 9901953 (A1)
US Patents (https://www.uspto.gov/)
----------------------------------
-----------------------------------
US 5925841
Digital Sampling Instrument employing cache memory (Jul. 20, 1999)

2
Documentation/sound/cards/sb-live-mixer.rst
View File

@ -337,7 +337,7 @@ WO 9901953 (A1)
US Patents (https://www.uspto.gov/)
----------------------------------
-----------------------------------
US 5925841
Digital Sampling Instrument employing cache memory (Jul. 20, 1999)

2
Documentation/sound/designs/timestamping.rst
View File

@ -143,7 +143,7 @@ timestamp shows when the information is put together by the driver
before returning from the ``STATUS`` and ``STATUS_EXT`` ioctl. in most cases
this driver_timestamp will be identical to the regular system tstamp.
Examples of typestamping with HDaudio:
Examples of timestamping with HDAudio:
1. DMA timestamp, no compensation for DMA+analog delay
::

2
Documentation/translations/it_IT/process/deprecated.rst
View File

@ -130,7 +130,7 @@ chi usa solo stringe terminate. La versione sicura da usare è
strscpy(). (chi usa strscpy() e necessita di estendere la
terminazione con NUL deve aggiungere una chiamata a memset())
Se il chiamate no usa stringhe terminate con NUL, allore strncpy()()
Se il chiamate no usa stringhe terminate con NUL, allore strncpy()
può continuare ad essere usata, ma i buffer di destinazione devono essere
marchiati con l'attributo `__nonstring <https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
per evitare avvisi durante la compilazione.

22
Documentation/virt/kvm/api.rst
View File

@ -6130,7 +6130,7 @@ HvCallSendSyntheticClusterIpi, HvCallSendSyntheticClusterIpiEx.
8.21 KVM_CAP_HYPERV_DIRECT_TLBFLUSH
-----------------------------------
:Architecture: x86
:Architectures: x86
This capability indicates that KVM running on top of Hyper-V hypervisor
enables Direct TLB flush for its guests meaning that TLB flush
@ -6143,19 +6143,33 @@ in CPUID and only exposes Hyper-V identification. In this case, guest
thinks it's running on Hyper-V and only use Hyper-V hypercalls.
8.22 KVM_CAP_S390_VCPU_RESETS
-----------------------------
Architectures: s390
:Architectures: s390
This capability indicates that the KVM_S390_NORMAL_RESET and
KVM_S390_CLEAR_RESET ioctls are available.
8.23 KVM_CAP_S390_PROTECTED
---------------------------
Architecture: s390
:Architectures: s390
This capability indicates that the Ultravisor has been initialized and
KVM can therefore start protected VMs.
This capability governs the KVM_S390_PV_COMMAND ioctl and the
KVM_MP_STATE_LOAD MP_STATE. KVM_SET_MP_STATE can fail for protected
guests when the state change is invalid.
8.24 KVM_CAP_STEAL_TIME
-----------------------
:Architectures: arm64, x86
This capability indicates that KVM supports steal time accounting.
When steal time accounting is supported it may be enabled with
architecture-specific interfaces. This capability and the architecture-
specific interfaces must be consistent, i.e. if one says the feature
is supported, than the other should as well and vice versa. For arm64
see Documentation/virt/kvm/devices/vcpu.rst "KVM_ARM_VCPU_PVTIME_CTRL".
For x86 see Documentation/virt/kvm/msr.rst "MSR_KVM_STEAL_TIME".

71
MAINTAINERS
View File

@ -1694,7 +1694,6 @@ F: arch/arm/mach-cns3xxx/
ARM/CAVIUM THUNDER NETWORK DRIVER
M: Sunil Goutham <sgoutham@marvell.com>
M: Robert Richter <rrichter@marvell.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/net/ethernet/cavium/thunder/
@ -3389,6 +3388,7 @@ M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
L: openwrt-devel@lists.openwrt.org (subscribers-only)
S: Supported
F: Documentation/devicetree/bindings/net/dsa/b53.txt
F: drivers/net/dsa/b53/*
F: include/linux/platform_data/b53.h
@ -3574,13 +3574,28 @@ L: bcm-kernel-feedback-list@broadcom.com
S: Maintained
F: drivers/phy/broadcom/phy-brcm-usb*
BROADCOM ETHERNET PHY DRIVERS
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
L: netdev@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt
F: drivers/net/phy/bcm*.[ch]
F: drivers/net/phy/broadcom.c
F: include/linux/brcmphy.h
BROADCOM GENET ETHERNET DRIVER
M: Doug Berger <opendmb@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
L: bcm-kernel-feedback-list@broadcom.com
L: netdev@vger.kernel.org
S: Supported
F: Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
F: Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
F: drivers/net/ethernet/broadcom/genet/
F: drivers/net/mdio/mdio-bcm-unimac.c
F: include/linux/platform_data/bcmgenet.h
F: include/linux/platform_data/mdio-bcm-unimac.h
BROADCOM IPROC ARM ARCHITECTURE
M: Ray Jui <rjui@broadcom.com>
@ -3932,8 +3947,8 @@ W: https://wireless.wiki.kernel.org/en/users/Drivers/carl9170
F: drivers/net/wireless/ath/carl9170/
CAVIUM I2C DRIVER
M: Robert Richter <rrichter@marvell.com>
S: Supported
M: Robert Richter <rric@kernel.org>
S: Odd Fixes
W: http://www.marvell.com
F: drivers/i2c/busses/i2c-octeon*
F: drivers/i2c/busses/i2c-thunderx*
@ -3948,8 +3963,8 @@ W: http://www.marvell.com
F: drivers/net/ethernet/cavium/liquidio/
CAVIUM MMC DRIVER
M: Robert Richter <rrichter@marvell.com>
S: Supported
M: Robert Richter <rric@kernel.org>
S: Odd Fixes
W: http://www.marvell.com
F: drivers/mmc/host/cavium*
@ -3961,9 +3976,9 @@ W: http://www.marvell.com
F: drivers/crypto/cavium/cpt/
CAVIUM THUNDERX2 ARM64 SOC
M: Robert Richter <rrichter@marvell.com>
M: Robert Richter <rric@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
S: Odd Fixes
F: Documentation/devicetree/bindings/arm/cavium-thunder2.txt
F: arch/arm64/boot/dts/cavium/thunder2-99xx*
@ -4242,6 +4257,8 @@ S: Maintained
F: .clang-format
CLANG/LLVM BUILD SUPPORT
M: Nathan Chancellor <natechancellor@gmail.com>
M: Nick Desaulniers <ndesaulniers@google.com>
L: clang-built-linux@googlegroups.com
S: Supported
W: https://clangbuiltlinux.github.io/
@ -5240,6 +5257,7 @@ DOCUMENTATION
M: Jonathan Corbet <corbet@lwn.net>
L: linux-doc@vger.kernel.org
S: Maintained
P: Documentation/doc-guide/maintainer-profile.rst
T: git git://git.lwn.net/linux.git docs-next
F: Documentation/
F: scripts/documentation-file-ref-check
@ -6174,16 +6192,15 @@ F: drivers/edac/highbank*
EDAC-CAVIUM OCTEON
M: Ralf Baechle <ralf@linux-mips.org>
M: Robert Richter <rrichter@marvell.com>
L: linux-edac@vger.kernel.org
L: linux-mips@vger.kernel.org
S: Supported
F: drivers/edac/octeon_edac*
EDAC-CAVIUM THUNDERX
M: Robert Richter <rrichter@marvell.com>
M: Robert Richter <rric@kernel.org>
L: linux-edac@vger.kernel.org
S: Supported
S: Odd Fixes
F: drivers/edac/thunderx_edac*
EDAC-CORE
@ -6191,7 +6208,7 @@ M: Borislav Petkov <bp@alien8.de>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
M: Tony Luck <tony.luck@intel.com>
R: James Morse <james.morse@arm.com>
R: Robert Richter <rrichter@marvell.com>
R: Robert Richter <rric@kernel.org>
L: linux-edac@vger.kernel.org
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras.git edac-for-next
@ -6495,7 +6512,6 @@ F: net/bridge/
ETHERNET PHY LIBRARY
M: Andrew Lunn <andrew@lunn.ch>
M: Florian Fainelli <f.fainelli@gmail.com>
M: Heiner Kallweit <hkallweit1@gmail.com>
R: Russell King <linux@armlinux.org.uk>
L: netdev@vger.kernel.org
@ -6885,6 +6901,14 @@ L: linuxppc-dev@lists.ozlabs.org
S: Maintained
F: drivers/dma/fsldma.*
FREESCALE DSPI DRIVER
M: Vladimir Oltean <olteanv@gmail.com>
L: linux-spi@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
F: drivers/spi/spi-fsl-dspi.c
F: include/linux/spi/spi-fsl-dspi.h
FREESCALE ENETC ETHERNET DRIVERS
M: Claudiu Manoil <claudiu.manoil@nxp.com>
L: netdev@vger.kernel.org
@ -8256,7 +8280,7 @@ IA64 (Itanium) PLATFORM
M: Tony Luck <tony.luck@intel.com>
M: Fenghua Yu <fenghua.yu@intel.com>
L: linux-ia64@vger.kernel.org
S: Maintained
S: Odd Fixes
T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git
F: Documentation/ia64/
F: arch/ia64/
@ -9776,7 +9800,7 @@ F: drivers/scsi/53c700*
LEAKING_ADDRESSES
M: Tobin C. Harding <me@tobin.cc>
M: Tycho Andersen <tycho@tycho.ws>
M: Tycho Andersen <tycho@tycho.pizza>
L: kernel-hardening@lists.openwall.com
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks.git
@ -13430,10 +13454,10 @@ F: Documentation/devicetree/bindings/pci/axis,artpec*
F: drivers/pci/controller/dwc/*artpec*
PCIE DRIVER FOR CAVIUM THUNDERX
M: Robert Richter <rrichter@marvell.com>
M: Robert Richter <rric@kernel.org>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
S: Odd Fixes
F: drivers/pci/controller/pci-thunder-*
PCIE DRIVER FOR HISILICON
@ -13570,12 +13594,18 @@ F: kernel/events/*
F: tools/lib/perf/
F: tools/perf/
PERFORMANCE EVENTS SUBSYSTEM ARM64 PMU EVENTS
PERFORMANCE EVENTS TOOLING ARM64
R: John Garry <john.garry@huawei.com>
R: Will Deacon <will@kernel.org>
R: Mathieu Poirier <mathieu.poirier@linaro.org>
R: Leo Yan <leo.yan@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: tools/build/feature/test-libopencsd.c
F: tools/perf/arch/arm*/
F: tools/perf/pmu-events/arch/arm64/
F: tools/perf/util/arm-spe*
F: tools/perf/util/cs-etm*
PERSONALITY HANDLING
M: Christoph Hellwig <hch@infradead.org>
@ -14366,7 +14396,7 @@ M: Rob Clark <robdclark@gmail.com>
L: iommu@lists.linux-foundation.org
L: linux-arm-msm@vger.kernel.org
S: Maintained
F: drivers/iommu/qcom_iommu.c
F: drivers/iommu/arm/arm-smmu/qcom_iommu.c
QUALCOMM IPCC MAILBOX DRIVER
M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
@ -15547,6 +15577,7 @@ F: include/uapi/linux/sed*
SECURITY CONTACT
M: Security Officers <security@kernel.org>
S: Supported
F: Documentation/admin-guide/security-bugs.rst
SECURITY SUBSYSTEM
M: James Morris <jmorris@namei.org>
@ -17215,8 +17246,8 @@ S: Maintained
F: drivers/net/thunderbolt.c
THUNDERX GPIO DRIVER
M: Robert Richter <rrichter@marvell.com>
S: Maintained
M: Robert Richter <rric@kernel.org>
S: Odd Fixes
F: drivers/gpio/gpio-thunderx.c
TI AM437X VPFE DRIVER

6
Makefile
View File

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 9
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc5
NAME = Kleptomaniac Octopus
# *DOCUMENTATION*
@ -882,10 +882,6 @@ KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
LDFLAGS_vmlinux += --gc-sections
endif
ifdef CONFIG_LIVEPATCH
KBUILD_CFLAGS += $(call cc-option, -flive-patching=inline-clone)
endif
ifdef CONFIG_SHADOW_CALL_STACK
CC_FLAGS_SCS := -fsanitize=shadow-call-stack
KBUILD_CFLAGS += $(CC_FLAGS_SCS)

6
arch/arc/boot/dts/hsdk.dts
View File

@ -88,6 +88,8 @@ idu_intc: idu-interrupt-controller {
arcpct: pct {
compatible = "snps,archs-pct";
interrupt-parent = <&cpu_intc>;
interrupts = <20>;
};
/* TIMER0 with interrupt for clockevent */
@ -208,7 +210,7 @@ gmac: ethernet@8000 {
reg = <0x8000 0x2000>;
interrupts = <10>;
interrupt-names = "macirq";
phy-mode = "rgmii";
phy-mode = "rgmii-id";
snps,pbl = <32>;
snps,multicast-filter-bins = <256>;
clocks = <&gmacclk>;
@ -226,7 +228,7 @@ mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
reg = <0>;
};
};

4
arch/arc/include/asm/pgalloc.h
View File

@ -18,10 +18,10 @@
* vineetg: April 2010
* -Switched pgtable_t from being struct page * to unsigned long
* =Needed so that Page Table allocator (pte_alloc_one) is not forced to
* to deal with struct page. Thay way in future we can make it allocate
* deal with struct page. That way in future we can make it allocate
* multiple PG Tbls in one Page Frame
* =sweet side effect is avoiding calls to ugly page_address( ) from the
* pg-tlb allocator sub-sys (pte_alloc_one, ptr_free, pmd_populate
* pg-tlb allocator sub-sys (pte_alloc_one, ptr_free, pmd_populate)
*
* Amit Bhor, Sameer Dhavale: Codito Technologies 2004
*/

14
arch/arc/kernel/perf_event.c
View File

@ -562,7 +562,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
{
struct arc_reg_pct_build pct_bcr;
struct arc_reg_cc_build cc_bcr;
int i, has_interrupts;
int i, has_interrupts, irq;
int counter_size; /* in bits */
union cc_name {
@ -637,13 +637,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
.attr_groups = arc_pmu->attr_groups,
};
if (has_interrupts) {
int irq = platform_get_irq(pdev, 0);
if (irq < 0) {
pr_err("Cannot get IRQ number for the platform\n");
return -ENODEV;
}
if (has_interrupts && (irq = platform_get_irq(pdev, 0) >= 0)) {
arc_pmu->irq = irq;
@ -652,9 +646,9 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
this_cpu_ptr(&arc_pmu_cpu));
on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
} else
} else {
arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
}
/*
* perf parser doesn't really like '-' symbol in events name, so let's

77
arch/arc/kernel/troubleshoot.c
View File

@ -18,44 +18,37 @@
#define ARC_PATH_MAX 256
/*
* Common routine to print scratch regs (r0-r12) or callee regs (r13-r25)
* -Prints 3 regs per line and a CR.
* -To continue, callee regs right after scratch, special handling of CR
*/
static noinline void print_reg_file(long *reg_rev, int start_num)
static noinline void print_regs_scratch(struct pt_regs *regs)
{
unsigned int i;
char buf[512];
int n = 0, len = sizeof(buf);
pr_cont("BTA: 0x%08lx\n SP: 0x%08lx FP: 0x%08lx BLK: %pS\n",
regs->bta, regs->sp, regs->fp, (void *)regs->blink);
pr_cont("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
regs->lp_start, regs->lp_end, regs->lp_count);
for (i = start_num; i < start_num + 13; i++) {
n += scnprintf(buf + n, len - n, "r%02u: 0x%08lx\t",
i, (unsigned long)*reg_rev);
if (((i + 1) % 3) == 0)
n += scnprintf(buf + n, len - n, "\n");
/* because pt_regs has regs reversed: r12..r0, r25..r13 */
if (is_isa_arcv2() && start_num == 0)
reg_rev++;
else
reg_rev--;
}
if (start_num != 0)
n += scnprintf(buf + n, len - n, "\n\n");
/* To continue printing callee regs on same line as scratch regs */
if (start_num == 0)
pr_info("%s", buf);
else
pr_cont("%s\n", buf);
pr_info("r00: 0x%08lx\tr01: 0x%08lx\tr02: 0x%08lx\n" \
"r03: 0x%08lx\tr04: 0x%08lx\tr05: 0x%08lx\n" \
"r06: 0x%08lx\tr07: 0x%08lx\tr08: 0x%08lx\n" \
"r09: 0x%08lx\tr10: 0x%08lx\tr11: 0x%08lx\n" \
"r12: 0x%08lx\t",
regs->r0, regs->r1, regs->r2,
regs->r3, regs->r4, regs->r5,
regs->r6, regs->r7, regs->r8,
regs->r9, regs->r10, regs->r11,
regs->r12);
}
static void show_callee_regs(struct callee_regs *cregs)
static void print_regs_callee(struct callee_regs *regs)
{
print_reg_file(&(cregs->r13), 13);
pr_cont("r13: 0x%08lx\tr14: 0x%08lx\n" \
"r15: 0x%08lx\tr16: 0x%08lx\tr17: 0x%08lx\n" \
"r18: 0x%08lx\tr19: 0x%08lx\tr20: 0x%08lx\n" \
"r21: 0x%08lx\tr22: 0x%08lx\tr23: 0x%08lx\n" \
"r24: 0x%08lx\tr25: 0x%08lx\n",
regs->r13, regs->r14,
regs->r15, regs->r16, regs->r17,
regs->r18, regs->r19, regs->r20,
regs->r21, regs->r22, regs->r23,
regs->r24, regs->r25);
}
static void print_task_path_n_nm(struct task_struct *tsk)
@ -175,7 +168,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
void show_regs(struct pt_regs *regs)
{
struct task_struct *tsk = current;
struct callee_regs *cregs;
struct callee_regs *cregs = (struct callee_regs *)tsk->thread.callee_reg;
/*
* generic code calls us with preemption disabled, but some calls
@ -204,25 +197,15 @@ void show_regs(struct pt_regs *regs)
STS_BIT(regs, A2), STS_BIT(regs, A1),
STS_BIT(regs, E2), STS_BIT(regs, E1));
#else
pr_cont(" [%2s%2s%2s%2s]",
pr_cont(" [%2s%2s%2s%2s] ",
STS_BIT(regs, IE),
(regs->status32 & STATUS_U_MASK) ? "U " : "K ",
STS_BIT(regs, DE), STS_BIT(regs, AE));
#endif
pr_cont(" BTA: 0x%08lx\n SP: 0x%08lx FP: 0x%08lx BLK: %pS\n",
regs->bta, regs->sp, regs->fp, (void *)regs->blink);
pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
regs->lp_start, regs->lp_end, regs->lp_count);
/* print regs->r0 thru regs->r12
* Sequential printing was generating horrible code
*/
print_reg_file(&(regs->r0), 0);
/* If Callee regs were saved, display them too */
cregs = (struct callee_regs *)current->thread.callee_reg;
print_regs_scratch(regs);
if (cregs)
show_callee_regs(cregs);
print_regs_callee(cregs);
preempt_disable();
}

27
arch/arc/mm/init.c
View File

@ -26,8 +26,8 @@ static unsigned long low_mem_sz;
#ifdef CONFIG_HIGHMEM
static unsigned long min_high_pfn, max_high_pfn;
static u64 high_mem_start;
static u64 high_mem_sz;
static phys_addr_t high_mem_start;
static phys_addr_t high_mem_sz;
#endif
#ifdef CONFIG_DISCONTIGMEM
@ -69,6 +69,7 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
high_mem_sz = size;
in_use = 1;
memblock_add_node(base, size, 1);
memblock_reserve(base, size);
#endif
}
@ -157,7 +158,7 @@ void __init setup_arch_memory(void)
min_high_pfn = PFN_DOWN(high_mem_start);
max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
max_zone_pfn[ZONE_HIGHMEM] = max_high_pfn;
max_zone_pfn[ZONE_HIGHMEM] = min_low_pfn;
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
@ -166,6 +167,17 @@ void __init setup_arch_memory(void)
free_area_init(max_zone_pfn);
}
static void __init highmem_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long tmp;
memblock_free(high_mem_start, high_mem_sz);
for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
}
/*
* mem_init - initializes memory
*
@ -174,14 +186,7 @@ void __init setup_arch_memory(void)
*/
void __init mem_init(void)
{
#ifdef CONFIG_HIGHMEM
unsigned long tmp;
reset_all_zones_managed_pages();
for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
memblock_free_all();
highmem_init();
mem_init_print_info(NULL);
}

1
arch/arc/plat-eznps/include/plat/ctop.h
View File

@ -33,7 +33,6 @@
#define CTOP_AUX_DPC (CTOP_AUX_BASE + 0x02C)
#define CTOP_AUX_LPC (CTOP_AUX_BASE + 0x030)
#define CTOP_AUX_EFLAGS (CTOP_AUX_BASE + 0x080)
#define CTOP_AUX_IACK (CTOP_AUX_BASE + 0x088)
#define CTOP_AUX_GPA1 (CTOP_AUX_BASE + 0x08C)
#define CTOP_AUX_UDMC (CTOP_AUX_BASE + 0x300)

2
arch/arm/boot/dts/bcm-hr2.dtsi
View File

@ -217,7 +217,7 @@ rng: rng@33000 {
};
qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
<0x11c408 0x004>,

2
arch/arm/boot/dts/bcm-nsp.dtsi
View File

@ -284,7 +284,7 @@ nand: nand@26000 {
};
qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
<0x11c408 0x004>,

2
arch/arm/boot/dts/bcm5301x.dtsi
View File

@ -488,7 +488,7 @@ nand: nand@18028000 {
};
spi@18029200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
reg = <0x18029200 0x184>,
<0x18029000 0x124>,
<0x1811b408 0x004>,

2
arch/arm/boot/dts/imx6q-logicpd.dts
View File

@ -13,7 +13,7 @@ / {
backlight: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm3 0 20000>;
pwms = <&pwm3 0 20000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&reg_lcd>;

2
arch/arm/boot/dts/imx6q-prtwd2.dts
View File

@ -30,7 +30,7 @@ usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
};
/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
i2c@4 {
i2c {
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;

2
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
View File

@ -22,8 +22,6 @@ chosen {
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
user-pb {
label = "user_pb";

2
arch/arm/boot/dts/imx6sx-pinfunc.h
View File

@ -1026,7 +1026,7 @@
#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15 0x01B0 0x04F8 0x0000 0x7 0x0
#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x01B4 0x04FC 0x0000 0x0 0x0
#define MX6SX_PAD_QSPI1B_SCLK__UART3_DCE_RX 0x01B4 0x04FC 0x0840 0x1 0x4
#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX 0x01B4 0x04FC 0x0000 0x0 0x0
#define MX6SX_PAD_QSPI1B_SCLK__UART3_DTE_TX 0x01B4 0x04FC 0x0000 0x1 0x0
#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK 0x01B4 0x04FC 0x0730 0x2 0x1
#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK 0x01B4 0x04FC 0x0780 0x3 0x2
#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16 0x01B4 0x04FC 0x06DC 0x4 0x1

2
arch/arm/boot/dts/imx7d-zii-rmu2.dts
View File

@ -58,7 +58,7 @@ &fec1 {
<&clks IMX7D_ENET1_TIME_ROOT_CLK>;
assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
assigned-clock-rates = <0>, <100000000>;
phy-mode = "rgmii";
phy-mode = "rgmii-id";
phy-handle = <&fec1_phy>;
status = "okay";

8
arch/arm/boot/dts/imx7ulp.dtsi
View File

@ -394,7 +394,7 @@ gpio_ptc: gpio@40ae0000 {
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLC>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 0 32>;
gpio-ranges = <&iomuxc1 0 0 20>;
};
gpio_ptd: gpio@40af0000 {
@ -408,7 +408,7 @@ gpio_ptd: gpio@40af0000 {
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLD>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 32 32>;
gpio-ranges = <&iomuxc1 0 32 12>;
};
gpio_pte: gpio@40b00000 {
@ -422,7 +422,7 @@ gpio_pte: gpio@40b00000 {
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLE>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 64 32>;
gpio-ranges = <&iomuxc1 0 64 16>;
};
gpio_ptf: gpio@40b10000 {
@ -436,7 +436,7 @@ gpio_ptf: gpio@40b10000 {
clocks = <&pcc2 IMX7ULP_CLK_RGPIO2P1>,
<&pcc3 IMX7ULP_CLK_PCTLF>;
clock-names = "gpio", "port";
gpio-ranges = <&iomuxc1 0 96 32>;
gpio-ranges = <&iomuxc1 0 96 20>;
};
};

29
arch/arm/boot/dts/logicpd-som-lv-baseboard.dtsi
View File

@ -51,6 +51,8 @@ &vaux4 {
&mcbsp2 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
};
&charger {
@ -102,35 +104,18 @@ video_reg: video_reg {
regulator-max-microvolt = <3300000>;
};
lcd0: display@0 {
compatible = "panel-dpi";
label = "28";
status = "okay";
/* default-on; */
lcd0: display {
/* This isn't the exact LCD, but the timings meet spec */
compatible = "logicpd,type28";
pinctrl-names = "default";
pinctrl-0 = <&lcd_enable_pin>;
enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
backlight = <&bl>;
enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
panel-timing {
clock-frequency = <9000000>;
hactive = <480>;
vactive = <272>;
hfront-porch = <3>;
hback-porch = <2>;
hsync-len = <42>;
vback-porch = <3>;
vfront-porch = <2>;
vsync-len = <11>;
hsync-active = <1>;
vsync-active = <1>;
de-active = <1>;
pixelclk-active = <0>;
};
};
bl: backlight {

2
arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
View File

@ -81,6 +81,8 @@ &vaux4 {
};
&mcbsp2 {
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
status = "okay";
};

2
arch/arm/boot/dts/ls1021a.dtsi
View File

@ -182,7 +182,7 @@ qspi: spi@1550000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x1550000 0x0 0x10000>,
<0x0 0x40000000 0x0 0x40000000>;
<0x0 0x40000000 0x0 0x20000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";

20
arch/arm/boot/dts/omap5.dtsi
View File

@ -488,11 +488,11 @@ rfbi: encoder@0 {
};
};
target-module@5000 {
target-module@4000 {
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x5000 0x4>,
<0x5010 0x4>,
<0x5014 0x4>;
reg = <0x4000 0x4>,
<0x4010 0x4>,
<0x4014 0x4>;
reg-names = "rev", "sysc", "syss";
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
@ -504,7 +504,7 @@ SYSC_OMAP2_SOFTRESET |
ti,syss-mask = <1>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x5000 0x1000>;
ranges = <0 0x4000 0x1000>;
dsi1: encoder@0 {
compatible = "ti,omap5-dsi";
@ -514,8 +514,9 @@ dsi1: encoder@0 {
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
clock-names = "fck";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
<&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
clock-names = "fck", "sys_clk";
};
};
@ -545,8 +546,9 @@ dsi2: encoder@0 {
reg-names = "proto", "phy", "pll";
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>;
clock-names = "fck";
clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>,
<&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 10>;
clock-names = "fck", "sys_clk";
};
};

2
arch/arm/boot/dts/socfpga_arria10.dtsi
View File

@ -821,7 +821,7 @@ timer2: timer2@ffd00000 {
timer3: timer3@ffd00100 {
compatible = "snps,dw-apb-timer";
interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xffd01000 0x100>;
reg = <0xffd00100 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
resets = <&rst L4SYSTIMER1_RESET>;

2
arch/arm/boot/dts/vfxxx.dtsi
View File

@ -495,7 +495,7 @@ edma1: dma-controller@40098000 {
};
ocotp: ocotp@400a5000 {
compatible = "fsl,vf610-ocotp";
compatible = "fsl,vf610-ocotp", "syscon";
reg = <0x400a5000 0x1000>;
clocks = <&clks VF610_CLK_OCOTP>;
};

16
arch/arm/configs/integrator_defconfig
View File

@ -1,13 +1,11 @@
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_MULTI_V4T=y
CONFIG_ARCH_MULTI_V5=y
# CONFIG_ARCH_MULTI_V7 is not set
@ -15,19 +13,17 @@ CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
CONFIG_INTEGRATOR_IMPD1=y
CONFIG_ARCH_INTEGRATOR_CP=y
CONFIG_PCI=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPUFREQ_DT=y
CONFIG_CMA=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
@ -37,6 +33,7 @@ CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
CONFIG_PCI=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
@ -52,9 +49,12 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_E100=y
CONFIG_SMC91X=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_DRM=y
CONFIG_DRM_DISPLAY_CONNECTOR=y
CONFIG_DRM_SIMPLE_BRIDGE=y
CONFIG_DRM_PL111=y
CONFIG_FB_MODE_HELPERS=y

2
arch/arm/mach-omap2/omap-iommu.c
View File

@ -74,7 +74,7 @@ static struct powerdomain *_get_pwrdm(struct device *dev)
return pwrdm;
clk = of_clk_get(dev->of_node->parent, 0);
if (!clk) {
if (IS_ERR(clk)) {
dev_err(dev, "no fck found\n");
return NULL;
}

2
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
View File

@ -745,7 +745,7 @@ nand: nand@66460000 {
};
qspi: spi@66470200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi";
compatible = "brcm,spi-ns2-qspi", "brcm,spi-bcm-qspi";
reg = <0x66470200 0x184>,
<0x66470000 0x124>,
<0x67017408 0x004>,

1
arch/arm64/boot/dts/freescale/Makefile
View File

@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb

2
arch/arm64/boot/dts/freescale/imx8mp.dtsi
View File

@ -702,7 +702,7 @@ sdma1: dma-controller@30bd0000 {
reg = <0x30bd0000 0x10000>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_SDMA1_ROOT>,
<&clk IMX8MP_CLK_SDMA1_ROOT>;
<&clk IMX8MP_CLK_AHB>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";

2
arch/arm64/boot/dts/freescale/imx8mq.dtsi
View File

@ -423,7 +423,7 @@ gpio5: gpio@30240000 {
tmu: tmu@30260000 {
compatible = "fsl,imx8mq-tmu";
reg = <0x30260000 0x10000>;
interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
little-endian;
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;

2
arch/arm64/boot/dts/mediatek/mt7622.dtsi
View File

@ -686,6 +686,8 @@ mmc0: mmc@11230000 {
clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
<&topckgen CLK_TOP_MSDC50_0_SEL>;
clock-names = "source", "hclk";
resets = <&pericfg MT7622_PERI_MSDC0_SW_RST>;
reset-names = "hrst";
status = "disabled";
};

20
arch/arm64/boot/dts/nvidia/tegra186.dtsi
View File

@ -337,8 +337,9 @@ sdmmc1: mmc@3400000 {
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03400000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC1>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC1>;
reset-names = "sdhci";
interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
@ -366,8 +367,9 @@ sdmmc2: mmc@3420000 {
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03420000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC2>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC2>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC2>;
reset-names = "sdhci";
interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAA &emc>,
@ -390,8 +392,9 @@ sdmmc3: mmc@3440000 {
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03440000 0x0 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC3>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC3>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC3>;
reset-names = "sdhci";
interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCR &emc>,
@ -416,8 +419,9 @@ sdmmc4: mmc@3460000 {
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03460000 0x0 0x10000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
<&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
<&bpmp TEGRA186_CLK_PLLC4_VCO>;
assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;

15
arch/arm64/boot/dts/nvidia/tegra194.dtsi
View File

@ -460,8 +460,9 @@ sdmmc1: mmc@3400000 {
compatible = "nvidia,tegra194-sdhci";
reg = <0x03400000 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA194_CLK_SDMMC1>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
<&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA194_RESET_SDMMC1>;
reset-names = "sdhci";
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>,
@ -485,8 +486,9 @@ sdmmc3: mmc@3440000 {
compatible = "nvidia,tegra194-sdhci";
reg = <0x03440000 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA194_CLK_SDMMC3>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
<&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA194_RESET_SDMMC3>;
reset-names = "sdhci";
interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>,
@ -511,8 +513,9 @@ sdmmc4: mmc@3460000 {
compatible = "nvidia,tegra194-sdhci";
reg = <0x03460000 0x10000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA194_CLK_SDMMC4>;
clock-names = "sdhci";
clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
<&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
clock-names = "sdhci", "tmclk";
assigned-clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
<&bpmp TEGRA194_CLK_PLLC4>;
assigned-clock-parents =

20
arch/arm64/boot/dts/nvidia/tegra210.dtsi
View File

@ -1194,8 +1194,9 @@ mmc@700b0000 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 14>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
@ -1222,8 +1223,9 @@ mmc@700b0200 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0200 0x0 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC2>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 9>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-1v8-drv";
@ -1239,8 +1241,9 @@ mmc@700b0400 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0400 0x0 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC3>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 69>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3", "sdmmc-1v8",
@ -1262,8 +1265,9 @@ mmc@700b0600 {
compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0600 0x0 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
clock-names = "sdhci";
clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
<&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
clock-names = "sdhci", "tmclk";
resets = <&tegra_car 15>;
reset-names = "sdhci";
pinctrl-names = "sdmmc-3v3-drv", "sdmmc-1v8-drv";

12
arch/arm64/boot/dts/xilinx/zynqmp.dtsi
View File

@ -13,6 +13,7 @@
*/
#include <dt-bindings/power/xlnx-zynqmp-power.h>
#include <dt-bindings/reset/xlnx-zynqmp-resets.h>
/ {
compatible = "xlnx,zynqmp";
@ -558,6 +559,15 @@ pcie_intc: legacy-interrupt-controller {
};
};
psgtr: phy@fd400000 {
compatible = "xlnx,zynqmp-psgtr-v1.1";
status = "disabled";
reg = <0x0 0xfd400000 0x0 0x40000>,
<0x0 0xfd3d0000 0x0 0x1000>;
reg-names = "serdes", "siou";
#phy-cells = <4>;
};
rtc: rtc@ffa60000 {
compatible = "xlnx,zynqmp-rtc";
status = "disabled";
@ -601,7 +611,7 @@ sdhci1: mmc@ff170000 {
power-domains = <&zynqmp_firmware PD_SD_1>;
};
smmu: smmu@fd800000 {
smmu: iommu@fd800000 {
compatible = "arm,mmu-500";
reg = <0x0 0xfd800000 0x0 0x20000>;
status = "disabled";

12
arch/arm64/configs/defconfig
View File

@ -724,6 +724,17 @@ CONFIG_USB_GADGET=y
CONFIG_USB_RENESAS_USBHS_UDC=m
CONFIG_USB_RENESAS_USB3=m
CONFIG_USB_TEGRA_XUDC=m
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_TYPEC=m
CONFIG_TYPEC_TCPM=m
CONFIG_TYPEC_FUSB302=m
@ -914,6 +925,7 @@ CONFIG_ARCH_TEGRA_194_SOC=y
CONFIG_ARCH_K3_AM6_SOC=y
CONFIG_ARCH_K3_J721E_SOC=y
CONFIG_TI_SCI_PM_DOMAINS=y
CONFIG_EXTCON_PTN5150=m
CONFIG_EXTCON_USB_GPIO=y
CONFIG_EXTCON_USBC_CROS_EC=y
CONFIG_IIO=y

2
arch/arm64/include/asm/kvm_host.h
View File

@ -368,7 +368,6 @@ struct kvm_vcpu_arch {
/* Guest PV state */
struct {
u64 steal;
u64 last_steal;
gpa_t base;
} steal;
@ -544,6 +543,7 @@ long kvm_hypercall_pv_features(struct kvm_vcpu *vcpu);
gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu);
void kvm_update_stolen_time(struct kvm_vcpu *vcpu);
bool kvm_arm_pvtime_supported(void);
int kvm_arm_pvtime_set_attr(struct kvm_vcpu *vcpu,
struct kvm_device_attr *attr);
int kvm_arm_pvtime_get_attr(struct kvm_vcpu *vcpu,

3
arch/arm64/kernel/module-plts.c
View File

@ -305,8 +305,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
mod->arch.core.plt_shndx = i;
else if (!strcmp(secstrings + sechdrs[i].sh_name, ".init.plt"))
mod->arch.init.plt_shndx = i;
else if (IS_ENABLED(CONFIG_DYNAMIC_FTRACE) &&
!strcmp(secstrings + sechdrs[i].sh_name,
else if (!strcmp(secstrings + sechdrs[i].sh_name,
".text.ftrace_trampoline"))
tramp = sechdrs + i;
else if (sechdrs[i].sh_type == SHT_SYMTAB)

1
arch/arm64/kernel/setup.c
View File

@ -280,7 +280,6 @@ u64 cpu_logical_map(int cpu)
{
return __cpu_logical_map[cpu];
}
EXPORT_SYMBOL_GPL(cpu_logical_map);
void __init __no_sanitize_address setup_arch(char **cmdline_p)
{

3
arch/arm64/kvm/arm.c
View File

@ -206,6 +206,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
*/
r = 1;
break;
case KVM_CAP_STEAL_TIME:
r = kvm_arm_pvtime_supported();
break;
default:
r = kvm_arch_vm_ioctl_check_extension(kvm, ext);
break;

8
arch/arm64/kvm/mmu.c
View File

@ -1877,6 +1877,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
!fault_supports_stage2_huge_mapping(memslot, hva, vma_pagesize)) {
force_pte = true;
vma_pagesize = PAGE_SIZE;
vma_shift = PAGE_SHIFT;
}
/*
@ -1970,7 +1971,12 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
(fault_status == FSC_PERM &&
stage2_is_exec(mmu, fault_ipa, vma_pagesize));
if (vma_pagesize == PUD_SIZE) {
/*
* If PUD_SIZE == PMD_SIZE, there is no real PUD level, and
* all we have is a 2-level page table. Trying to map a PUD in
* this case would be fatally wrong.
*/
if (PUD_SIZE != PMD_SIZE && vma_pagesize == PUD_SIZE) {
pud_t new_pud = kvm_pfn_pud(pfn, mem_type);
new_pud = kvm_pud_mkhuge(new_pud);

27
arch/arm64/kvm/pvtime.c
View File

@ -13,25 +13,22 @@
void kvm_update_stolen_time(struct kvm_vcpu *vcpu)
{
struct kvm *kvm = vcpu->kvm;
u64 steal;
__le64 steal_le;
u64 offset;
int idx;
u64 base = vcpu->arch.steal.base;
u64 last_steal = vcpu->arch.steal.last_steal;
u64 offset = offsetof(struct pvclock_vcpu_stolen_time, stolen_time);
u64 steal = 0;
int idx;
if (base == GPA_INVALID)
return;
/* Let's do the local bookkeeping */
steal = vcpu->arch.steal.steal;
steal += current->sched_info.run_delay - vcpu->arch.steal.last_steal;
vcpu->arch.steal.last_steal = current->sched_info.run_delay;
vcpu->arch.steal.steal = steal;
steal_le = cpu_to_le64(steal);
idx = srcu_read_lock(&kvm->srcu);
offset = offsetof(struct pvclock_vcpu_stolen_time, stolen_time);
kvm_put_guest(kvm, base + offset, steal_le, u64);
if (!kvm_get_guest(kvm, base + offset, steal)) {
steal = le64_to_cpu(steal);
vcpu->arch.steal.last_steal = READ_ONCE(current->sched_info.run_delay);
steal += vcpu->arch.steal.last_steal - last_steal;
kvm_put_guest(kvm, base + offset, cpu_to_le64(steal));
}
srcu_read_unlock(&kvm->srcu, idx);
}
@ -43,6 +40,7 @@ long kvm_hypercall_pv_features(struct kvm_vcpu *vcpu)
switch (feature) {
case ARM_SMCCC_HV_PV_TIME_FEATURES:
case ARM_SMCCC_HV_PV_TIME_ST:
if (vcpu->arch.steal.base != GPA_INVALID)
val = SMCCC_RET_SUCCESS;
break;
}
@ -64,7 +62,6 @@ gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu)
* Start counting stolen time from the time the guest requests
* the feature enabled.
*/
vcpu->arch.steal.steal = 0;
vcpu->arch.steal.last_steal = current->sched_info.run_delay;
idx = srcu_read_lock(&kvm->srcu);
@ -74,7 +71,7 @@ gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu)
return base;
}
static bool kvm_arm_pvtime_supported(void)
bool kvm_arm_pvtime_supported(void)
{
return !!sched_info_on();
}

16
arch/arm64/kvm/trace_arm.h
View File

@ -23,7 +23,7 @@ TRACE_EVENT(kvm_entry,
__entry->vcpu_pc = vcpu_pc;
),
TP_printk("PC: 0x%08lx", __entry->vcpu_pc)
TP_printk("PC: 0x%016lx", __entry->vcpu_pc)
);
TRACE_EVENT(kvm_exit,
@ -42,7 +42,7 @@ TRACE_EVENT(kvm_exit,
__entry->vcpu_pc = vcpu_pc;
),
TP_printk("%s: HSR_EC: 0x%04x (%s), PC: 0x%08lx",
TP_printk("%s: HSR_EC: 0x%04x (%s), PC: 0x%016lx",
__print_symbolic(__entry->ret, kvm_arm_exception_type),
__entry->esr_ec,
__print_symbolic(__entry->esr_ec, kvm_arm_exception_class),
@ -69,7 +69,7 @@ TRACE_EVENT(kvm_guest_fault,
__entry->ipa = ipa;
),
TP_printk("ipa %#llx, hsr %#08lx, hxfar %#08lx, pc %#08lx",
TP_printk("ipa %#llx, hsr %#08lx, hxfar %#08lx, pc %#016lx",
__entry->ipa, __entry->hsr,
__entry->hxfar, __entry->vcpu_pc)
);
@ -131,7 +131,7 @@ TRACE_EVENT(kvm_mmio_emulate,
__entry->cpsr = cpsr;
),
TP_printk("Emulate MMIO at: 0x%08lx (instr: %08lx, cpsr: %08lx)",
TP_printk("Emulate MMIO at: 0x%016lx (instr: %08lx, cpsr: %08lx)",
__entry->vcpu_pc, __entry->instr, __entry->cpsr)
);
@ -149,7 +149,7 @@ TRACE_EVENT(kvm_unmap_hva_range,
__entry->end = end;
),
TP_printk("mmu notifier unmap range: %#08lx -- %#08lx",
TP_printk("mmu notifier unmap range: %#016lx -- %#016lx",
__entry->start, __entry->end)
);
@ -165,7 +165,7 @@ TRACE_EVENT(kvm_set_spte_hva,
__entry->hva = hva;
),
TP_printk("mmu notifier set pte hva: %#08lx", __entry->hva)
TP_printk("mmu notifier set pte hva: %#016lx", __entry->hva)
);
TRACE_EVENT(kvm_age_hva,
@ -182,7 +182,7 @@ TRACE_EVENT(kvm_age_hva,
__entry->end = end;
),
TP_printk("mmu notifier age hva: %#08lx -- %#08lx",
TP_printk("mmu notifier age hva: %#016lx -- %#016lx",
__entry->start, __entry->end)
);
@ -198,7 +198,7 @@ TRACE_EVENT(kvm_test_age_hva,
__entry->hva = hva;
),
TP_printk("mmu notifier test age hva: %#08lx", __entry->hva)
TP_printk("mmu notifier test age hva: %#016lx", __entry->hva)
);
TRACE_EVENT(kvm_set_way_flush,

6
arch/arm64/kvm/trace_handle_exit.h
View File

@ -22,7 +22,7 @@ TRACE_EVENT(kvm_wfx_arm64,
__entry->is_wfe = is_wfe;
),
TP_printk("guest executed wf%c at: 0x%08lx",
TP_printk("guest executed wf%c at: 0x%016lx",
__entry->is_wfe ? 'e' : 'i', __entry->vcpu_pc)
);
@ -42,7 +42,7 @@ TRACE_EVENT(kvm_hvc_arm64,
__entry->imm = imm;
),
TP_printk("HVC at 0x%08lx (r0: 0x%08lx, imm: 0x%lx)",
TP_printk("HVC at 0x%016lx (r0: 0x%016lx, imm: 0x%lx)",
__entry->vcpu_pc, __entry->r0, __entry->imm)
);
@ -135,7 +135,7 @@ TRACE_EVENT(trap_reg,
__entry->write_value = write_value;
),
TP_printk("%s %s reg %d (0x%08llx)", __entry->fn, __entry->is_write?"write to":"read from", __entry->reg, __entry->write_value)
TP_printk("%s %s reg %d (0x%016llx)", __entry->fn, __entry->is_write?"write to":"read from", __entry->reg, __entry->write_value)
);
TRACE_EVENT(kvm_handle_sys_reg,

2
arch/ia64/kernel/ia64_ksyms.c
View File

@ -3,7 +3,7 @@
* Architecture-specific kernel symbols
*/
#ifdef CONFIG_VIRTUAL_MEM_MAP
#if defined(CONFIG_VIRTUAL_MEM_MAP) || defined(CONFIG_DISCONTIGMEM)
#include <linux/compiler.h>
#include <linux/export.h>
#include <linux/memblock.h>

3
arch/microblaze/mm/init.c
View File

@ -46,6 +46,9 @@ unsigned long memory_size;
EXPORT_SYMBOL(memory_size);
unsigned long lowmem_size;
EXPORT_SYMBOL(min_low_pfn);
EXPORT_SYMBOL(max_low_pfn);
#ifdef CONFIG_HIGHMEM
pte_t *kmap_pte;
EXPORT_SYMBOL(kmap_pte);

2
arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h
View File

@ -26,7 +26,6 @@
#define cpu_has_counter 1
#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000)
#define cpu_has_divec 0
#define cpu_has_ejtag 0
#define cpu_has_inclusive_pcaches 1
#define cpu_has_llsc 1
#define cpu_has_mcheck 0
@ -42,7 +41,6 @@
#define cpu_has_veic 0
#define cpu_has_vint 0
#define cpu_has_vtag_icache 0
#define cpu_has_watch 1
#define cpu_has_wsbh 1
#define cpu_has_ic_fills_f_dc 1
#define cpu_hwrena_impl_bits 0xc0000000

2
arch/mips/include/asm/mach-loongson64/irq.h
View File

@ -2,8 +2,6 @@
#ifndef __ASM_MACH_LOONGSON64_IRQ_H_
#define __ASM_MACH_LOONGSON64_IRQ_H_
#include <boot_param.h>
/* cpu core interrupt numbers */
#define NR_IRQS_LEGACY 16
#define NR_MIPS_CPU_IRQS 8

1
arch/mips/include/asm/mach-loongson64/mmzone.h
View File

@ -9,7 +9,6 @@
#ifndef _ASM_MACH_LOONGSON64_MMZONE_H
#define _ASM_MACH_LOONGSON64_MMZONE_H
#include <boot_param.h>
#define NODE_ADDRSPACE_SHIFT 44
#define NODE0_ADDRSPACE_OFFSET 0x000000000000UL
#define NODE1_ADDRSPACE_OFFSET 0x100000000000UL

4
arch/mips/kernel/perf_event_mipsxx.c
View File

@ -1898,8 +1898,8 @@ static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config)
(base_id >= 64 && base_id < 90) ||
(base_id >= 128 && base_id < 164) ||
(base_id >= 192 && base_id < 200) ||
(base_id >= 256 && base_id < 274) ||
(base_id >= 320 && base_id < 358) ||
(base_id >= 256 && base_id < 275) ||
(base_id >= 320 && base_id < 361) ||
(base_id >= 384 && base_id < 574))
break;

2
arch/mips/kernel/smp-bmips.c
View File

@ -239,6 +239,8 @@ static int bmips_boot_secondary(int cpu, struct task_struct *idle)
*/
static void bmips_init_secondary(void)
{
bmips_cpu_setup();
switch (current_cpu_type()) {
case CPU_BMIPS4350:
case CPU_BMIPS4380:

12
arch/mips/kernel/traps.c
View File

@ -1287,6 +1287,18 @@ static int enable_restore_fp_context(int msa)
err = own_fpu_inatomic(1);
if (msa && !err) {
enable_msa();
/*
* with MSA enabled, userspace can see MSACSR
* and MSA regs, but the values in them are from
* other task before current task, restore them
* from saved fp/msa context
*/
write_msa_csr(current->thread.fpu.msacsr);
/*
* own_fpu_inatomic(1) just restore low 64bit,
* fix the high 64bit
*/
init_msa_upper();
set_thread_flag(TIF_USEDMSA);
set_thread_flag(TIF_MSA_CTX_LIVE);
}

2
arch/mips/kvm/mips.c
View File

@ -137,6 +137,8 @@ extern void kvm_init_loongson_ipi(struct kvm *kvm);
int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
{
switch (type) {
case KVM_VM_MIPS_AUTO:
break;
#ifdef CONFIG_KVM_MIPS_VZ
case KVM_VM_MIPS_VZ:
#else

4
arch/mips/mm/c-r4k.c
View File

@ -1712,7 +1712,11 @@ static void setup_scache(void)
printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n",
scache_size >> 10,
way_string[c->scache.ways], c->scache.linesz);
if (current_cpu_type() == CPU_BMIPS5000)
c->options |= MIPS_CPU_INCLUSIVE_CACHES;
}
#else
if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
panic("Dunno how to handle MIPS32 / MIPS64 second level cache");

4
arch/mips/oprofile/op_model_mipsxx.c
View File

@ -245,7 +245,6 @@ static int mipsxx_perfcount_handler(void)
switch (counters) {
#define HANDLE_COUNTER(n) \
fallthrough; \
case n + 1: \
control = r_c0_perfctrl ## n(); \
counter = r_c0_perfcntr ## n(); \
@ -256,8 +255,11 @@ static int mipsxx_perfcount_handler(void)
handled = IRQ_HANDLED; \
}
HANDLE_COUNTER(3)
fallthrough;
HANDLE_COUNTER(2)
fallthrough;
HANDLE_COUNTER(1)
fallthrough;
HANDLE_COUNTER(0)
}

4
arch/mips/sni/a20r.c
View File

@ -222,8 +222,8 @@ void __init sni_a20r_irq_init(void)
irq_set_chip_and_handler(i, &a20r_irq_type, handle_level_irq);
sni_hwint = a20r_hwint;
change_c0_status(ST0_IM, IE_IRQ0);
if (request_irq(SNI_A20R_IRQ_BASE + 3, sni_isa_irq_handler, 0, "ISA",
NULL))
if (request_irq(SNI_A20R_IRQ_BASE + 3, sni_isa_irq_handler,
IRQF_SHARED, "ISA", sni_isa_irq_handler))
pr_err("Failed to register ISA interrupt\n");
}

31
arch/openrisc/include/asm/uaccess.h
View File

@ -165,19 +165,19 @@ struct __large_struct {
#define __get_user_nocheck(x, ptr, size) \
({ \
long __gu_err, __gu_val; \
__get_user_size(__gu_val, (ptr), (size), __gu_err); \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
long __gu_err; \
__get_user_size((x), (ptr), (size), __gu_err); \
__gu_err; \
})
#define __get_user_check(x, ptr, size) \
({ \
long __gu_err = -EFAULT, __gu_val = 0; \
long __gu_err = -EFAULT; \
const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \
if (access_ok(__gu_addr, size)) \
__get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
(x) = (__force __typeof__(*(ptr)))__gu_val; \
__get_user_size((x), __gu_addr, (size), __gu_err); \
else \
(x) = (__typeof__(*(ptr))) 0; \
__gu_err; \
})
@ -191,11 +191,13 @@ do { \
case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break; \
case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break; \
case 8: __get_user_asm2(x, ptr, retval); break; \
default: (x) = __get_user_bad(); \
default: (x) = (__typeof__(*(ptr)))__get_user_bad(); \
} \
} while (0)
#define __get_user_asm(x, addr, err, op) \
{ \
unsigned long __gu_tmp; \
__asm__ __volatile__( \
"1: "op" %1,0(%2)\n" \
"2:\n" \
@ -209,10 +211,14 @@ do { \
" .align 2\n" \
" .long 1b,3b\n" \
".previous" \
: "=r"(err), "=r"(x) \
: "r"(addr), "i"(-EFAULT), "0"(err))
: "=r"(err), "=r"(__gu_tmp) \
: "r"(addr), "i"(-EFAULT), "0"(err)); \
(x) = (__typeof__(*(addr)))__gu_tmp; \
}
#define __get_user_asm2(x, addr, err) \
{ \
unsigned long long __gu_tmp; \
__asm__ __volatile__( \
"1: l.lwz %1,0(%2)\n" \
"2: l.lwz %H1,4(%2)\n" \
@ -229,8 +235,11 @@ do { \
" .long 1b,4b\n" \
" .long 2b,4b\n" \
".previous" \
: "=r"(err), "=&r"(x) \
: "r"(addr), "i"(-EFAULT), "0"(err))
: "=r"(err), "=&r"(__gu_tmp) \
: "r"(addr), "i"(-EFAULT), "0"(err)); \
(x) = (__typeof__(*(addr)))( \
(__typeof__((x)-(x)))__gu_tmp); \
}
/* more complex routines */

10
arch/openrisc/kernel/setup.c
View File

@ -80,6 +80,16 @@ static void __init setup_memory(void)
*/
memblock_reserve(__pa(_stext), _end - _stext);
#ifdef CONFIG_BLK_DEV_INITRD
/* Then reserve the initrd, if any */
if (initrd_start && (initrd_end > initrd_start)) {
unsigned long aligned_start = ALIGN_DOWN(initrd_start, PAGE_SIZE);
unsigned long aligned_end = ALIGN(initrd_end, PAGE_SIZE);
memblock_reserve(__pa(aligned_start), aligned_end - aligned_start);
}
#endif /* CONFIG_BLK_DEV_INITRD */
early_init_fdt_reserve_self();
early_init_fdt_scan_reserved_mem();

2
arch/openrisc/mm/cache.c
View File

@ -16,7 +16,7 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
static void cache_loop(struct page *page, const unsigned int reg)
static __always_inline void cache_loop(struct page *page, const unsigned int reg)
{
unsigned long paddr = page_to_pfn(page) << PAGE_SHIFT;
unsigned long line = paddr & ~(L1_CACHE_BYTES - 1);

2
arch/s390/Kconfig
View File

@ -30,7 +30,7 @@ config GENERIC_BUG_RELATIVE_POINTERS
def_bool y
config GENERIC_LOCKBREAK
def_bool y if PREEMPTTION
def_bool y if PREEMPTION
config PGSTE
def_bool y if KVM

4
arch/s390/configs/debug_defconfig
View File

@ -626,6 +626,7 @@ CONFIG_NTFS_RW=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_INODE64=y
CONFIG_HUGETLBFS=y
CONFIG_CONFIGFS_FS=m
CONFIG_ECRYPT_FS=m
@ -807,6 +808,7 @@ CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_REF_SCALE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=300
# CONFIG_RCU_TRACE is not set
CONFIG_LATENCYTOP=y
@ -818,6 +820,7 @@ CONFIG_PREEMPT_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BPF_KPROBE_OVERRIDE=y
CONFIG_HIST_TRIGGERS=y
CONFIG_S390_PTDUMP=y
CONFIG_NOTIFIER_ERROR_INJECTION=m
@ -829,6 +832,7 @@ CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAIL_FUNCTION=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LKDTM=m
CONFIG_TEST_LIST_SORT=y

3
arch/s390/configs/defconfig
View File

@ -617,6 +617,7 @@ CONFIG_NTFS_RW=y
CONFIG_PROC_KCORE=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_INODE64=y
CONFIG_HUGETLBFS=y
CONFIG_CONFIGFS_FS=m
CONFIG_ECRYPT_FS=m
@ -763,6 +764,7 @@ CONFIG_PANIC_ON_OOPS=y
CONFIG_TEST_LOCKUP=m
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_REF_SCALE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_LATENCYTOP=y
CONFIG_BOOTTIME_TRACING=y
@ -771,6 +773,7 @@ CONFIG_STACK_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BPF_KPROBE_OVERRIDE=y
CONFIG_HIST_TRIGGERS=y
CONFIG_S390_PTDUMP=y
CONFIG_LKDTM=m

1
arch/s390/configs/zfcpdump_defconfig
View File

@ -74,5 +74,6 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_PANIC_ON_OOPS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_TRACE is not set
# CONFIG_FTRACE is not set
# CONFIG_RUNTIME_TESTING_MENU is not set

27
arch/x86/entry/common.c
View File

@ -60,16 +60,10 @@ __visible noinstr void do_syscall_64(unsigned long nr, struct pt_regs *regs)
#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
static __always_inline unsigned int syscall_32_enter(struct pt_regs *regs)
{
unsigned int nr = (unsigned int)regs->orig_ax;
if (IS_ENABLED(CONFIG_IA32_EMULATION))
current_thread_info()->status |= TS_COMPAT;
/*
* Subtlety here: if ptrace pokes something larger than 2^32-1 into
* orig_ax, the unsigned int return value truncates it. This may
* or may not be necessary, but it matches the old asm behavior.
*/
return (unsigned int)syscall_enter_from_user_mode(regs, nr);
return (unsigned int)regs->orig_ax;
}
/*
@ -91,6 +85,13 @@ __visible noinstr void do_int80_syscall_32(struct pt_regs *regs)
{
unsigned int nr = syscall_32_enter(regs);
/*
* Subtlety here: if ptrace pokes something larger than 2^32-1 into
* orig_ax, the unsigned int return value truncates it. This may
* or may not be necessary, but it matches the old asm behavior.
*/
nr = (unsigned int)syscall_enter_from_user_mode(regs, nr);
do_syscall_32_irqs_on(regs, nr);
syscall_exit_to_user_mode(regs);
}
@ -100,6 +101,13 @@ static noinstr bool __do_fast_syscall_32(struct pt_regs *regs)
unsigned int nr = syscall_32_enter(regs);
int res;
/*
* This cannot use syscall_enter_from_user_mode() as it has to
* fetch EBP before invoking any of the syscall entry work
* functions.
*/
syscall_enter_from_user_mode_prepare(regs);
instrumentation_begin();
/* Fetch EBP from where the vDSO stashed it. */
if (IS_ENABLED(CONFIG_X86_64)) {
@ -122,6 +130,9 @@ static noinstr bool __do_fast_syscall_32(struct pt_regs *regs)
return false;
}
/* The case truncates any ptrace induced syscall nr > 2^32 -1 */
nr = (unsigned int)syscall_enter_from_user_mode_work(regs, nr);
/* Now this is just like a normal syscall. */
do_syscall_32_irqs_on(regs, nr);
syscall_exit_to_user_mode(regs);

12
arch/x86/include/asm/entry-common.h
View File

@ -18,8 +18,16 @@ static __always_inline void arch_check_user_regs(struct pt_regs *regs)
* state, not the interrupt state as imagined by Xen.
*/
unsigned long flags = native_save_fl();
WARN_ON_ONCE(flags & (X86_EFLAGS_AC | X86_EFLAGS_DF |
X86_EFLAGS_NT));
unsigned long mask = X86_EFLAGS_DF | X86_EFLAGS_NT;
/*
* For !SMAP hardware we patch out CLAC on entry.
*/
if (boot_cpu_has(X86_FEATURE_SMAP) ||
(IS_ENABLED(CONFIG_64_BIT) && boot_cpu_has(X86_FEATURE_XENPV)))
mask |= X86_EFLAGS_AC;
WARN_ON_ONCE(flags & mask);
/* We think we came from user mode. Make sure pt_regs agrees. */
WARN_ON_ONCE(!user_mode(regs));

2
arch/x86/include/asm/ptrace.h
View File

@ -327,8 +327,8 @@ static inline unsigned long regs_get_kernel_argument(struct pt_regs *regs,
static const unsigned int argument_offs[] = {
#ifdef __i386__
offsetof(struct pt_regs, ax),
offsetof(struct pt_regs, cx),
offsetof(struct pt_regs, dx),
offsetof(struct pt_regs, cx),
#define NR_REG_ARGUMENTS 3
#else
offsetof(struct pt_regs, di),

26
arch/x86/kernel/kvm.c
View File

@ -270,9 +270,8 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_kvm_asyncpf_interrupt)
{
struct pt_regs *old_regs = set_irq_regs(regs);
u32 token;
irqentry_state_t state;
state = irqentry_enter(regs);
ack_APIC_irq();
inc_irq_stat(irq_hv_callback_count);
@ -283,7 +282,6 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_kvm_asyncpf_interrupt)
wrmsrl(MSR_KVM_ASYNC_PF_ACK, 1);
}
irqentry_exit(regs, state);
set_irq_regs(old_regs);
}
@ -654,7 +652,6 @@ static void __init kvm_guest_init(void)
}
if (pv_tlb_flush_supported()) {
pv_ops.mmu.flush_tlb_others = kvm_flush_tlb_others;
pv_ops.mmu.tlb_remove_table = tlb_remove_table;
pr_info("KVM setup pv remote TLB flush\n");
}
@ -767,6 +764,14 @@ static __init int activate_jump_labels(void)
}
arch_initcall(activate_jump_labels);
static void kvm_free_pv_cpu_mask(void)
{
unsigned int cpu;
for_each_possible_cpu(cpu)
free_cpumask_var(per_cpu(__pv_cpu_mask, cpu));
}
static __init int kvm_alloc_cpumask(void)
{
int cpu;
@ -785,11 +790,20 @@ static __init int kvm_alloc_cpumask(void)
if (alloc)
for_each_possible_cpu(cpu) {
zalloc_cpumask_var_node(per_cpu_ptr(&__pv_cpu_mask, cpu),
GFP_KERNEL, cpu_to_node(cpu));
if (!zalloc_cpumask_var_node(
per_cpu_ptr(&__pv_cpu_mask, cpu),
GFP_KERNEL, cpu_to_node(cpu))) {
goto zalloc_cpumask_fail;
}
}
apic->send_IPI_mask_allbutself = kvm_send_ipi_mask_allbutself;
pv_ops.mmu.flush_tlb_others = kvm_flush_tlb_others;
return 0;
zalloc_cpumask_fail:
kvm_free_pv_cpu_mask();
return -ENOMEM;
}
arch_initcall(kvm_alloc_cpumask);

65
arch/x86/kernel/traps.c
View File

@ -729,20 +729,9 @@ static bool is_sysenter_singlestep(struct pt_regs *regs)
#endif
}
static __always_inline void debug_enter(unsigned long *dr6, unsigned long *dr7)
static __always_inline unsigned long debug_read_clear_dr6(void)
{
/*
* Disable breakpoints during exception handling; recursive exceptions
* are exceedingly 'fun'.
*
* Since this function is NOKPROBE, and that also applies to
* HW_BREAKPOINT_X, we can't hit a breakpoint before this (XXX except a
* HW_BREAKPOINT_W on our stack)
*
* Entry text is excluded for HW_BP_X and cpu_entry_area, which
* includes the entry stack is excluded for everything.
*/
*dr7 = local_db_save();
unsigned long dr6;
/*
* The Intel SDM says:
@ -755,15 +744,12 @@ static __always_inline void debug_enter(unsigned long *dr6, unsigned long *dr7)
*
* Keep it simple: clear DR6 immediately.
*/
get_debugreg(*dr6, 6);
get_debugreg(dr6, 6);
set_debugreg(0, 6);
/* Filter out all the reserved bits which are preset to 1 */
*dr6 &= ~DR6_RESERVED;
}
dr6 &= ~DR6_RESERVED;
static __always_inline void debug_exit(unsigned long dr7)
{
local_db_restore(dr7);
return dr6;
}
/*
@ -863,6 +849,18 @@ static void handle_debug(struct pt_regs *regs, unsigned long dr6, bool user)
static __always_inline void exc_debug_kernel(struct pt_regs *regs,
unsigned long dr6)
{
/*
* Disable breakpoints during exception handling; recursive exceptions
* are exceedingly 'fun'.
*
* Since this function is NOKPROBE, and that also applies to
* HW_BREAKPOINT_X, we can't hit a breakpoint before this (XXX except a
* HW_BREAKPOINT_W on our stack)
*
* Entry text is excluded for HW_BP_X and cpu_entry_area, which
* includes the entry stack is excluded for everything.
*/
unsigned long dr7 = local_db_save();
bool irq_state = idtentry_enter_nmi(regs);
instrumentation_begin();
@ -883,6 +881,8 @@ static __always_inline void exc_debug_kernel(struct pt_regs *regs,
instrumentation_end();
idtentry_exit_nmi(regs, irq_state);
local_db_restore(dr7);
}
static __always_inline void exc_debug_user(struct pt_regs *regs,
@ -894,6 +894,15 @@ static __always_inline void exc_debug_user(struct pt_regs *regs,
*/
WARN_ON_ONCE(!user_mode(regs));
/*
* NB: We can't easily clear DR7 here because
* idtentry_exit_to_usermode() can invoke ptrace, schedule, access
* user memory, etc. This means that a recursive #DB is possible. If
* this happens, that #DB will hit exc_debug_kernel() and clear DR7.
* Since we're not on the IST stack right now, everything will be
* fine.
*/
irqentry_enter_from_user_mode(regs);
instrumentation_begin();
@ -907,36 +916,24 @@ static __always_inline void exc_debug_user(struct pt_regs *regs,
/* IST stack entry */
DEFINE_IDTENTRY_DEBUG(exc_debug)
{
unsigned long dr6, dr7;
debug_enter(&dr6, &dr7);
exc_debug_kernel(regs, dr6);
debug_exit(dr7);
exc_debug_kernel(regs, debug_read_clear_dr6());
}
/* User entry, runs on regular task stack */
DEFINE_IDTENTRY_DEBUG_USER(exc_debug)
{
unsigned long dr6, dr7;
debug_enter(&dr6, &dr7);
exc_debug_user(regs, dr6);
debug_exit(dr7);
exc_debug_user(regs, debug_read_clear_dr6());
}
#else
/* 32 bit does not have separate entry points. */
DEFINE_IDTENTRY_RAW(exc_debug)
{
unsigned long dr6, dr7;
debug_enter(&dr6, &dr7);
unsigned long dr6 = debug_read_clear_dr6();
if (user_mode(regs))
exc_debug_user(regs, dr6);
else
exc_debug_kernel(regs, dr6);
debug_exit(dr7);
}
#endif

Some files were not shown because too many files have changed in this diff Show More