Merge branch 'master'

CREDITS

@@ -611,8 +611,7 @@ S: USA
 N: Randolph Chung
 E: tausq@debian.org
 D: Linux/PA-RISC hacker
-S: Los Altos, CA 94022
+S: Hong Kong
-S: USA
 
 N: Juan Jose Ciarlante
 W: http://juanjox.kernelnotes.org/
@@ -3405,6 +3404,15 @@ S: Chudenicka 8
 S: 10200 Prague 10, Hostivar
 S: Czech Republic
 
+N: Thibaut Varene
+E: T-Bone@parisc-linux.org
+W: http://www.parisc-linux.org/
+P: 1024D/B7D2F063 E67C 0D43 A75E 12A5 BB1C  FA2F 1E32 C3DA B7D2 F063
+D: PA-RISC port minion, PDC and GSCPS2 drivers, debuglocks and other bits
+D: Some bits in an ARM port, S1D13XXX FB driver, random patches here and there
+D: AD1889 sound driver
+S: Paris, France
+
 N: Heikki Vatiainen
 E: hessu@cs.tut.fi
 D: Co-author of Multi-Protocol Over ATM (MPOA), some LANE hacks

Documentation/00-INDEX

@@ -24,6 +24,8 @@ DMA-mapping.txt
 	- info for PCI drivers using DMA portably across all platforms.
 DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
+HOWTO
+	- The process and procedures of how to do Linux kernel development.
 IO-mapping.txt
 	- how to access I/O mapped memory from within device drivers.
 IPMI.txt
@@ -256,6 +258,10 @@ specialix.txt
 	- info on hardware/driver for specialix IO8+ multiport serial card.
 spinlocks.txt
 	- info on using spinlocks to provide exclusive access in kernel.
+stable_api_nonsense.txt
+	- info on why the kernel does not have a stable in-kernel api or abi.
+stable_kernel_rules.txt
+	- rules and procedures for the -stable kernel releases.
 stallion.txt
 	- info on using the Stallion multiport serial driver.
 svga.txt

Documentation/HOWTO

@@ -0,0 +1,618 @@
+HOWTO do Linux kernel development
+---------------------------------
+
+This is the be-all, end-all document on this topic.  It contains
+instructions on how to become a Linux kernel developer and how to learn
+to work with the Linux kernel development community.  It tries to not
+contain anything related to the technical aspects of kernel programming,
+but will help point you in the right direction for that.
+
+If anything in this document becomes out of date, please send in patches
+to the maintainer of this file, who is listed at the bottom of the
+document.
+
+
+Introduction
+------------
+
+So, you want to learn how to become a Linux kernel developer?  Or you
+have been told by your manager, "Go write a Linux driver for this
+device."  This document's goal is to teach you everything you need to
+know to achieve this by describing the process you need to go through,
+and hints on how to work with the community.  It will also try to
+explain some of the reasons why the community works like it does.
+
+The kernel is written mostly in C, with some architecture-dependent
+parts written in assembly. A good understanding of C is required for
+kernel development.  Assembly (any architecture) is not required unless
+you plan to do low-level development for that architecture.  Though they
+are not a good substitute for a solid C education and/or years of
+experience, the following books are good for, if anything, reference:
+ - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall]
+ - "Practical C Programming" by Steve Oualline [O'Reilly]
+
+The kernel is written using GNU C and the GNU toolchain.  While it
+adheres to the ISO C89 standard, it uses a number of extensions that are
+not featured in the standard.  The kernel is a freestanding C
+environment, with no reliance on the standard C library, so some
+portions of the C standard are not supported.  Arbitrary long long
+divisions and floating point are not allowed.  It can sometimes be
+difficult to understand the assumptions the kernel has on the toolchain
+and the extensions that it uses, and unfortunately there is no
+definitive reference for them.  Please check the gcc info pages (`info
+gcc`) for some information on them.
+
+Please remember that you are trying to learn how to work with the
+existing development community.  It is a diverse group of people, with
+high standards for coding, style and procedure.  These standards have
+been created over time based on what they have found to work best for
+such a large and geographically dispersed team.  Try to learn as much as
+possible about these standards ahead of time, as they are well
+documented; do not expect people to adapt to you or your company's way
+of doing things.
+
+
+Legal Issues
+------------
+
+The Linux kernel source code is released under the GPL.  Please see the
+file, COPYING, in the main directory of the source tree, for details on
+the license.  If you have further questions about the license, please
+contact a lawyer, and do not ask on the Linux kernel mailing list.  The
+people on the mailing lists are not lawyers, and you should not rely on
+their statements on legal matters.
+
+For common questions and answers about the GPL, please see:
+	http://www.gnu.org/licenses/gpl-faq.html
+
+
+Documentation
+------------
+
+The Linux kernel source tree has a large range of documents that are
+invaluable for learning how to interact with the kernel community.  When
+new features are added to the kernel, it is recommended that new
+documentation files are also added which explain how to use the feature.
+When a kernel change causes the interface that the kernel exposes to
+userspace to change, it is recommended that you send the information or
+a patch to the manual pages explaining the change to the manual pages
+maintainer at mtk-manpages@gmx.net.
+
+Here is a list of files that are in the kernel source tree that are
+required reading:
+  README
+    This file gives a short background on the Linux kernel and describes
+    what is necessary to do to configure and build the kernel.  People
+    who are new to the kernel should start here.
+
+  Documentation/Changes
+    This file gives a list of the minimum levels of various software
+    packages that are necessary to build and run the kernel
+    successfully.
+
+  Documentation/CodingStyle
+    This describes the Linux kernel coding style, and some of the
+    rationale behind it. All new code is expected to follow the
+    guidelines in this document. Most maintainers will only accept
+    patches if these rules are followed, and many people will only
+    review code if it is in the proper style.
+
+  Documentation/SubmittingPatches
+  Documentation/SubmittingDrivers
+    These files describe in explicit detail how to successfully create
+    and send a patch, including (but not limited to):
+       - Email contents
+       - Email format
+       - Who to send it to
+    Following these rules will not guarantee success (as all patches are
+    subject to scrutiny for content and style), but not following them
+    will almost always prevent it.
+
+    Other excellent descriptions of how to create patches properly are:
+	"The Perfect Patch"
+		http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+	"Linux kernel patch submission format"
+		http://linux.yyz.us/patch-format.html
+
+  Documentation/stable_api_nonsense.txt
+    This file describes the rationale behind the conscious decision to
+    not have a stable API within the kernel, including things like:
+      - Subsystem shim-layers (for compatibility?)
+      - Driver portability between Operating Systems.
+      - Mitigating rapid change within the kernel source tree (or
+	preventing rapid change)
+    This document is crucial for understanding the Linux development
+    philosophy and is very important for people moving to Linux from
+    development on other Operating Systems.
+
+  Documentation/SecurityBugs
+    If you feel you have found a security problem in the Linux kernel,
+    please follow the steps in this document to help notify the kernel
+    developers, and help solve the issue.
+
+  Documentation/ManagementStyle
+    This document describes how Linux kernel maintainers operate and the
+    shared ethos behind their methodologies.  This is important reading
+    for anyone new to kernel development (or anyone simply curious about
+    it), as it resolves a lot of common misconceptions and confusion
+    about the unique behavior of kernel maintainers.
+
+  Documentation/stable_kernel_rules.txt
+    This file describes the rules on how the stable kernel releases
+    happen, and what to do if you want to get a change into one of these
+    releases.
+
+  Documentation/kernel-docs.txt
+    A list of external documentation that pertains to kernel
+    development.  Please consult this list if you do not find what you
+    are looking for within the in-kernel documentation.
+
+  Documentation/applying-patches.txt
+    A good introduction describing exactly what a patch is and how to
+    apply it to the different development branches of the kernel.
+
+The kernel also has a large number of documents that can be
+automatically generated from the source code itself.  This includes a
+full description of the in-kernel API, and rules on how to handle
+locking properly.  The documents will be created in the
+Documentation/DocBook/ directory and can be generated as PDF,
+Postscript, HTML, and man pages by running:
+	make pdfdocs
+	make psdocs
+	make htmldocs
+	make mandocs
+respectively from the main kernel source directory.
+
+
+Becoming A Kernel Developer
+---------------------------
+
+If you do not know anything about Linux kernel development, you should
+look at the Linux KernelNewbies project:
+	http://kernelnewbies.org
+It consists of a helpful mailing list where you can ask almost any type
+of basic kernel development question (make sure to search the archives
+first, before asking something that has already been answered in the
+past.)  It also has an IRC channel that you can use to ask questions in
+real-time, and a lot of helpful documentation that is useful for
+learning about Linux kernel development.
+
+The website has basic information about code organization, subsystems,
+and current projects (both in-tree and out-of-tree). It also describes
+some basic logistical information, like how to compile a kernel and
+apply a patch.
+
+If you do not know where you want to start, but you want to look for
+some task to start doing to join into the kernel development community,
+go to the Linux Kernel Janitor's project:
+	http://janitor.kernelnewbies.org/
+It is a great place to start.  It describes a list of relatively simple
+problems that need to be cleaned up and fixed within the Linux kernel
+source tree.  Working with the developers in charge of this project, you
+will learn the basics of getting your patch into the Linux kernel tree,
+and possibly be pointed in the direction of what to go work on next, if
+you do not already have an idea.
+
+If you already have a chunk of code that you want to put into the kernel
+tree, but need some help getting it in the proper form, the
+kernel-mentors project was created to help you out with this.  It is a
+mailing list, and can be found at:
+	http://selenic.com/mailman/listinfo/kernel-mentors
+
+Before making any actual modifications to the Linux kernel code, it is
+imperative to understand how the code in question works.  For this
+purpose, nothing is better than reading through it directly (most tricky
+bits are commented well), perhaps even with the help of specialized
+tools.  One such tool that is particularly recommended is the Linux
+Cross-Reference project, which is able to present source code in a
+self-referential, indexed webpage format. An excellent up-to-date
+repository of the kernel code may be found at:
+	http://sosdg.org/~coywolf/lxr/
+
+
+The development process
+-----------------------
+
+Linux kernel development process currently consists of a few different
+main kernel "branches" and lots of different subsystem-specific kernel
+branches.  These different branches are:
+  - main 2.6.x kernel tree
+  - 2.6.x.y -stable kernel tree
+  - 2.6.x -git kernel patches
+  - 2.6.x -mm kernel patches
+  - subsystem specific kernel trees and patches
+
+2.6.x kernel tree
+-----------------
+2.6.x kernels are maintained by Linus Torvalds, and can be found on
+kernel.org in the pub/linux/kernel/v2.6/ directory.  Its development
+process is as follows:
+  - As soon as a new kernel is released a two weeks window is open,
+    during this period of time maintainers can submit big diffs to
+    Linus, usually the patches that have already been included in the
+    -mm kernel for a few weeks.  The preferred way to submit big changes
+    is using git (the kernel's source management tool, more information
+    can be found at http://git.or.cz/) but plain patches are also just
+    fine.
+  - After two weeks a -rc1 kernel is released it is now possible to push
+    only patches that do not include new features that could affect the
+    stability of the whole kernel.  Please note that a whole new driver
+    (or filesystem) might be accepted after -rc1 because there is no
+    risk of causing regressions with such a change as long as the change
+    is self-contained and does not affect areas outside of the code that
+    is being added.  git can be used to send patches to Linus after -rc1
+    is released, but the patches need to also be sent to a public
+    mailing list for review.
+  - A new -rc is released whenever Linus deems the current git tree to
+    be in a reasonably sane state adequate for testing.  The goal is to
+    release a new -rc kernel every week.
+  - Process continues until the kernel is considered "ready", the
+    process should last around 6 weeks.
+
+It is worth mentioning what Andrew Morton wrote on the linux-kernel
+mailing list about kernel releases:
+	"Nobody knows when a kernel will be released, because it's
+	released according to perceived bug status, not according to a
+	preconceived timeline."
+
+2.6.x.y -stable kernel tree
+---------------------------
+Kernels with 4 digit versions are -stable kernels. They contain
+relatively small and critical fixes for security problems or significant
+regressions discovered in a given 2.6.x kernel.
+
+This is the recommended branch for users who want the most recent stable
+kernel and are not interested in helping test development/experimental
+versions.
+
+If no 2.6.x.y kernel is available, then the highest numbered 2.6.x
+kernel is the current stable kernel.
+
+2.6.x.y are maintained by the "stable" team <stable@kernel.org>, and are
+released almost every other week.
+
+The file Documentation/stable_kernel_rules.txt in the kernel tree
+documents what kinds of changes are acceptable for the -stable tree, and
+how the release process works.
+
+2.6.x -git patches
+------------------
+These are daily snapshots of Linus' kernel tree which are managed in a
+git repository (hence the name.) These patches are usually released
+daily and represent the current state of Linus' tree.  They are more
+experimental than -rc kernels since they are generated automatically
+without even a cursory glance to see if they are sane.
+
+2.6.x -mm kernel patches
+------------------------
+These are experimental kernel patches released by Andrew Morton.  Andrew
+takes all of the different subsystem kernel trees and patches and mushes
+them together, along with a lot of patches that have been plucked from
+the linux-kernel mailing list.  This tree serves as a proving ground for
+new features and patches.  Once a patch has proved its worth in -mm for
+a while Andrew or the subsystem maintainer pushes it on to Linus for
+inclusion in mainline.
+
+It is heavily encouraged that all new patches get tested in the -mm tree
+before they are sent to Linus for inclusion in the main kernel tree.
+
+These kernels are not appropriate for use on systems that are supposed
+to be stable and they are more risky to run than any of the other
+branches.
+
+If you wish to help out with the kernel development process, please test
+and use these kernel releases and provide feedback to the linux-kernel
+mailing list if you have any problems, and if everything works properly.
+
+In addition to all the other experimental patches, these kernels usually
+also contain any changes in the mainline -git kernels available at the
+time of release.
+
+The -mm kernels are not released on a fixed schedule, but usually a few
+-mm kernels are released in between each -rc kernel (1 to 3 is common).
+
+Subsystem Specific kernel trees and patches
+-------------------------------------------
+A number of the different kernel subsystem developers expose their
+development trees so that others can see what is happening in the
+different areas of the kernel.  These trees are pulled into the -mm
+kernel releases as described above.
+
+Here is a list of some of the different kernel trees available:
+  git trees:
+    - Kbuild development tree, Sam Ravnborg <sam@ravnborg.org>
+	kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
+
+    - ACPI development tree, Len Brown <len.brown@intel.com>
+	kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
+
+    - Block development tree, Jens Axboe <axboe@suse.de>
+	kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
+
+    - DRM development tree, Dave Airlie <airlied@linux.ie>
+	kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
+
+    - ia64 development tree, Tony Luck <tony.luck@intel.com>
+	kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
+
+    - ieee1394 development tree, Jody McIntyre <scjody@modernduck.com>
+	kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
+
+    - infiniband, Roland Dreier <rolandd@cisco.com>
+	kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
+
+    - libata, Jeff Garzik <jgarzik@pobox.com>
+	kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
+
+    - network drivers, Jeff Garzik <jgarzik@pobox.com>
+	kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
+
+    - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
+	kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
+
+    - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
+	kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
+
+  Other git kernel trees can be found listed at http://kernel.org/git
+
+  quilt trees:
+    - USB, PCI, Driver Core, and I2C, Greg Kroah-Hartman <gregkh@suse.de>
+	kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+
+
+Bug Reporting
+-------------
+
+bugzilla.kernel.org is where the Linux kernel developers track kernel
+bugs.  Users are encouraged to report all bugs that they find in this
+tool.  For details on how to use the kernel bugzilla, please see:
+	http://test.kernel.org/bugzilla/faq.html
+
+The file REPORTING-BUGS in the main kernel source directory has a good
+template for how to report a possible kernel bug, and details what kind
+of information is needed by the kernel developers to help track down the
+problem.
+
+
+Mailing lists
+-------------
+
+As some of the above documents describe, the majority of the core kernel
+developers participate on the Linux Kernel Mailing list.  Details on how
+to subscribe and unsubscribe from the list can be found at:
+	http://vger.kernel.org/vger-lists.html#linux-kernel
+There are archives of the mailing list on the web in many different
+places.  Use a search engine to find these archives.  For example:
+	http://dir.gmane.org/gmane.linux.kernel
+It is highly recommended that you search the archives about the topic
+you want to bring up, before you post it to the list. A lot of things
+already discussed in detail are only recorded at the mailing list
+archives.
+
+Most of the individual kernel subsystems also have their own separate
+mailing list where they do their development efforts.  See the
+MAINTAINERS file for a list of what these lists are for the different
+groups.
+
+Many of the lists are hosted on kernel.org. Information on them can be
+found at:
+	http://vger.kernel.org/vger-lists.html
+
+Please remember to follow good behavioral habits when using the lists.
+Though a bit cheesy, the following URL has some simple guidelines for
+interacting with the list (or any list):
+	http://www.albion.com/netiquette/
+
+If multiple people respond to your mail, the CC: list of recipients may
+get pretty large. Don't remove anybody from the CC: list without a good
+reason, or don't reply only to the list address. Get used to receiving the
+mail twice, one from the sender and the one from the list, and don't try
+to tune that by adding fancy mail-headers, people will not like it.
+
+Remember to keep the context and the attribution of your replies intact,
+keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and
+add your statements between the individual quoted sections instead of
+writing at the top of the mail.
+
+If you add patches to your mail, make sure they are plain readable text
+as stated in Documentation/SubmittingPatches. Kernel developers don't
+want to deal with attachments or compressed patches; they may want
+to comment on individual lines of your patch, which works only that way.
+Make sure you use a mail program that does not mangle spaces and tab
+characters. A good first test is to send the mail to yourself and try
+to apply your own patch by yourself. If that doesn't work, get your
+mail program fixed or change it until it works.
+
+Above all, please remember to show respect to other subscribers.
+
+
+Working with the community
+--------------------------
+
+The goal of the kernel community is to provide the best possible kernel
+there is.  When you submit a patch for acceptance, it will be reviewed
+on its technical merits and those alone.  So, what should you be
+expecting?
+  - criticism
+  - comments
+  - requests for change
+  - requests for justification
+  - silence
+
+Remember, this is part of getting your patch into the kernel.  You have
+to be able to take criticism and comments about your patches, evaluate
+them at a technical level and either rework your patches or provide
+clear and concise reasoning as to why those changes should not be made.
+If there are no responses to your posting, wait a few days and try
+again, sometimes things get lost in the huge volume.
+
+What should you not do?
+  - expect your patch to be accepted without question
+  - become defensive
+  - ignore comments
+  - resubmit the patch without making any of the requested changes
+
+In a community that is looking for the best technical solution possible,
+there will always be differing opinions on how beneficial a patch is.
+You have to be cooperative, and willing to adapt your idea to fit within
+the kernel.  Or at least be willing to prove your idea is worth it.
+Remember, being wrong is acceptable as long as you are willing to work
+toward a solution that is right.
+
+It is normal that the answers to your first patch might simply be a list
+of a dozen things you should correct.  This does _not_ imply that your
+patch will not be accepted, and it is _not_ meant against you
+personally.  Simply correct all issues raised against your patch and
+resend it.
+
+
+Differences between the kernel community and corporate structures
+-----------------------------------------------------------------
+
+The kernel community works differently than most traditional corporate
+development environments.  Here are a list of things that you can try to
+do to try to avoid problems:
+  Good things to say regarding your proposed changes:
+    - "This solves multiple problems."
+    - "This deletes 2000 lines of code."
+    - "Here is a patch that explains what I am trying to describe."
+    - "I tested it on 5 different architectures..."
+    - "Here is a series of small patches that..."
+    - "This increases performance on typical machines..."
+
+  Bad things you should avoid saying:
+    - "We did it this way in AIX/ptx/Solaris, so therefore it must be
+      good..."
+    - "I've being doing this for 20 years, so..."
+    - "This is required for my company to make money"
+    - "This is for our Enterprise product line."
+    - "Here is my 1000 page design document that describes my idea"
+    - "I've been working on this for 6 months..."
+    - "Here's a 5000 line patch that..."
+    - "I rewrote all of the current mess, and here it is..."
+    - "I have a deadline, and this patch needs to be applied now."
+
+Another way the kernel community is different than most traditional
+software engineering work environments is the faceless nature of
+interaction.  One benefit of using email and irc as the primary forms of
+communication is the lack of discrimination based on gender or race.
+The Linux kernel work environment is accepting of women and minorities
+because all you are is an email address.  The international aspect also
+helps to level the playing field because you can't guess gender based on
+a person's name. A man may be named Andrea and a woman may be named Pat.
+Most women who have worked in the Linux kernel and have expressed an
+opinion have had positive experiences.
+
+The language barrier can cause problems for some people who are not
+comfortable with English.  A good grasp of the language can be needed in
+order to get ideas across properly on mailing lists, so it is
+recommended that you check your emails to make sure they make sense in
+English before sending them.
+
+
+Break up your changes
+---------------------
+
+The Linux kernel community does not gladly accept large chunks of code
+dropped on it all at once.  The changes need to be properly introduced,
+discussed, and broken up into tiny, individual portions.  This is almost
+the exact opposite of what companies are used to doing.  Your proposal
+should also be introduced very early in the development process, so that
+you can receive feedback on what you are doing.  It also lets the
+community feel that you are working with them, and not simply using them
+as a dumping ground for your feature.  However, don't send 50 emails at
+one time to a mailing list, your patch series should be smaller than
+that almost all of the time.
+
+The reasons for breaking things up are the following:
+
+1) Small patches increase the likelihood that your patches will be
+   applied, since they don't take much time or effort to verify for
+   correctness.  A 5 line patch can be applied by a maintainer with
+   barely a second glance. However, a 500 line patch may take hours to
+   review for correctness (the time it takes is exponentially
+   proportional to the size of the patch, or something).
+
+   Small patches also make it very easy to debug when something goes
+   wrong.  It's much easier to back out patches one by one than it is
+   to dissect a very large patch after it's been applied (and broken
+   something).
+
+2) It's important not only to send small patches, but also to rewrite
+   and simplify (or simply re-order) patches before submitting them.
+
+Here is an analogy from kernel developer Al Viro:
+	"Think of a teacher grading homework from a math student.  The
+	teacher does not want to see the student's trials and errors
+	before they came up with the solution. They want to see the
+	cleanest, most elegant answer.  A good student knows this, and
+	would never submit her intermediate work before the final
+	solution."
+
+	The same is true of kernel development. The maintainers and
+	reviewers do not want to see the thought process behind the
+	solution to the problem one is solving. They want to see a
+	simple and elegant solution."
+
+It may be challenging to keep the balance between presenting an elegant
+solution and working together with the community and discussing your
+unfinished work. Therefore it is good to get early in the process to
+get feedback to improve your work, but also keep your changes in small
+chunks that they may get already accepted, even when your whole task is
+not ready for inclusion now.
+
+Also realize that it is not acceptable to send patches for inclusion
+that are unfinished and will be "fixed up later."
+
+
+Justify your change
+-------------------
+
+Along with breaking up your patches, it is very important for you to let
+the Linux community know why they should add this change.  New features
+must be justified as being needed and useful.
+
+
+Document your change
+--------------------
+
+When sending in your patches, pay special attention to what you say in
+the text in your email.  This information will become the ChangeLog
+information for the patch, and will be preserved for everyone to see for
+all time.  It should describe the patch completely, containing:
+  - why the change is necessary
+  - the overall design approach in the patch
+  - implementation details
+  - testing results
+
+For more details on what this should all look like, please see the
+ChangeLog section of the document:
+  "The Perfect Patch"
+      http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+
+
+
+
+All of these things are sometimes very hard to do. It can take years to
+perfect these practices (if at all). It's a continuous process of
+improvement that requires a lot of patience and determination. But
+don't give up, it's possible. Many have done it before, and each had to
+start exactly where you are now.
+
+
+
+
+----------
+Thanks to Paolo Ciarrocchi who allowed the "Development Process" section
+to be based on text he had written, and to Randy Dunlap and Gerrit
+Huizenga for some of the list of things you should and should not say.
+Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
+Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi
+Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop,
+David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for
+their review, comments, and contributions.  Without their help, this
+document would not have been possible.
+
+
+
+Maintainer: Greg Kroah-Hartman <greg@kroah.com>

MAINTAINERS

@@ -58,6 +58,7 @@ P: Person
 M: Mail patches to
 L: Mailing list that is relevant to this area
 W: Web-page with status/info
+T: SCM tree type and URL.  Type is one of: git, hg, quilt.
 S: Status, one of the following:
 
 	Supported:	Someone is actually paid to look after this.
@@ -183,6 +184,7 @@ P:	Len Brown
 M:	len.brown@intel.com
 L:	acpi-devel@lists.sourceforge.net
 W:	http://acpi.sourceforge.net/
+T:	git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
 S:	Maintained
 
 AD1816 SOUND DRIVER
@@ -418,6 +420,7 @@ BLOCK LAYER
 P:	Jens Axboe
 M:	axboe@suse.de
 L:	linux-kernel@vger.kernel.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
 S:	Maintained
 
 BLUETOOTH SUBSYSTEM
@@ -803,12 +806,14 @@ DRIVER CORE, KOBJECTS, AND SYSFS
 P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
 L:	linux-kernel@vger.kernel.org
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 
 DRM DRIVERS
 P:	David Airlie
 M:	airlied@linux.ie
 L:	dri-devel@lists.sourceforge.net
+T:	git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 
 DSCC4 DRIVER
@@ -1113,6 +1118,7 @@ P:	Jean Delvare
 M:	khali@linux-fr.org
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.nu/
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Maintained
 
 I2O
@@ -1145,6 +1151,7 @@ P:	Tony Luck
 M:	tony.luck@intel.com
 L:	linux-ia64@vger.kernel.org
 W:	http://www.ia64-linux.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
 S:	Maintained
 
 SN-IA64 (Itanium) SUB-PLATFORM
@@ -1212,6 +1219,7 @@ P:	Jody McIntyre
 M:	scjody@steamballoon.com
 L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/scjody/ieee1394.git
 S:	Maintained
 
 IEEE 1394 OHCI DRIVER
@@ -1263,6 +1271,7 @@ P:	Hal Rosenstock
 M:	halr@voltaire.com
 L:	openib-general@openib.org
 W:	http://www.openib.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
 S:	Supported
 
 INPUT (KEYBOARD, MOUSE, JOYSTICK) DRIVERS
@@ -1436,6 +1445,7 @@ P:	Kai Germaschewski
 M:	kai@germaschewski.name
 P:	Sam Ravnborg
 M:	sam@ravnborg.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
 S:	Maintained 
 
 KERNEL JANITORS
@@ -1782,6 +1792,7 @@ M:	akpm@osdl.org
 P:	Jeff Garzik
 M:	jgarzik@pobox.com
 L:	netdev@vger.kernel.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
 S:	Maintained
 
 NETWORKING [GENERAL]
@@ -1959,6 +1970,7 @@ P:	Greg Kroah-Hartman
 M:	gregkh@suse.de
 L:	linux-kernel@vger.kernel.org
 L:	linux-pci@atrey.karlin.mff.cuni.cz
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 
 PCI HOTPLUG CORE
@@ -1980,6 +1992,7 @@ S:	Maintained
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	http://lists.infradead.org/mailman/listinfo/linux-pcmcia
+T:	git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
 S:	Maintained
 
 PCNET32 NETWORK DRIVER
@@ -2189,6 +2202,7 @@ SCSI SUBSYSTEM
 P:	James E.J. Bottomley
 M:	James.Bottomley@SteelEye.com
 L:	linux-scsi@vger.kernel.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 S:	Maintained
 
 SCSI TAPE DRIVER
@@ -2228,6 +2242,7 @@ SERIAL ATA (SATA) SUBSYSTEM:
 P:	Jeff Garzik
 M:	jgarzik@pobox.com
 L:	linux-ide@vger.kernel.org
+T:	git kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
 S:	Supported
 
 SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
@@ -2749,6 +2764,7 @@ M:	gregkh@suse.de
 L:	linux-usb-users@lists.sourceforge.net
 L:	linux-usb-devel@lists.sourceforge.net
 W:	http://www.linux-usb.org
+T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 
 USB UHCI DRIVER

arch/ia64/kernel/ivt.S

@@ -91,16 +91,17 @@ ENTRY(vhpt_miss)
 	 * (the "original") TLB miss, which may either be caused by an instruction
 	 * fetch or a data access (or non-access).
 	 *
-	 * What we do here is normal TLB miss handing for the _original_ miss, followed
+	 * What we do here is normal TLB miss handing for the _original_ miss,
-	 * by inserting the TLB entry for the virtual page table page that the VHPT
+	 * followed by inserting the TLB entry for the virtual page table page
-	 * walker was attempting to access.  The latter gets inserted as long
+	 * that the VHPT walker was attempting to access.  The latter gets
-	 * as both L1 and L2 have valid mappings for the faulting address.
+	 * inserted as long as page table entry above pte level have valid
-	 * The TLB entry for the original miss gets inserted only if
+	 * mappings for the faulting address.  The TLB entry for the original
-	 * the L3 entry indicates that the page is present.
+	 * miss gets inserted only if the pte entry indicates that the page is
+	 * present.
 	 *
 	 * do_page_fault gets invoked in the following cases:
 	 *	- the faulting virtual address uses unimplemented address bits
-	 *	- the faulting virtual address has no L1, L2, or L3 mapping
+	 *	- the faulting virtual address has no valid page table mapping
 	 */
 	mov r16=cr.ifa				// get address that caused the TLB miss
 #ifdef CONFIG_HUGETLB_PAGE
@@ -126,7 +127,7 @@ ENTRY(vhpt_miss)
 #endif
 	;;
 	cmp.eq p6,p7=5,r17			// is IFA pointing into to region 5?
-	shr.u r18=r22,PGDIR_SHIFT		// get bits 33-63 of the faulting address
+	shr.u r18=r22,PGDIR_SHIFT		// get bottom portion of pgd index bit
 	;;
 (p7)	dep r17=r17,r19,(PAGE_SHIFT-3),3	// put region number bits in place
 
@@ -137,38 +138,38 @@ ENTRY(vhpt_miss)
 (p6)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
 (p7)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
 	;;
-(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=PTA + IFA(33,42)*8
+(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=pgd_offset for region 5
-(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
+(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=pgd_offset for region[0-4]
 	cmp.eq p7,p6=0,r21			// unused address bits all zeroes?
 #ifdef CONFIG_PGTABLE_4
-	shr.u r28=r22,PUD_SHIFT			// shift L2 index into position
+	shr.u r28=r22,PUD_SHIFT			// shift pud index into position
 #else
-	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
 #endif
 	;;
-	ld8 r17=[r17]				// fetch the L1 entry (may be 0)
+	ld8 r17=[r17]				// get *pgd (may be 0)
 	;;
-(p7)	cmp.eq p6,p7=r17,r0			// was L1 entry NULL?
+(p7)	cmp.eq p6,p7=r17,r0			// was pgd_present(*pgd) == NULL?
 #ifdef CONFIG_PGTABLE_4
-	dep r28=r28,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
+	dep r28=r28,r17,3,(PAGE_SHIFT-3)	// r28=pud_offset(pgd,addr)
 	;;
-	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
-(p7)	ld8 r29=[r28]				// fetch the L2 entry (may be 0)
+(p7)	ld8 r29=[r28]				// get *pud (may be 0)
 	;;
-(p7)	cmp.eq.or.andcm p6,p7=r29,r0		// was L2 entry NULL?
+(p7)	cmp.eq.or.andcm p6,p7=r29,r0		// was pud_present(*pud) == NULL?
-	dep r17=r18,r29,3,(PAGE_SHIFT-3)	// compute address of L3 page table entry
+	dep r17=r18,r29,3,(PAGE_SHIFT-3)	// r17=pmd_offset(pud,addr)
 #else
-	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L3 page table entry
+	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// r17=pmd_offset(pgd,addr)
 #endif
 	;;
-(p7)	ld8 r20=[r17]				// fetch the L3 entry (may be 0)
+(p7)	ld8 r20=[r17]				// get *pmd (may be 0)
-	shr.u r19=r22,PAGE_SHIFT		// shift L4 index into position
+	shr.u r19=r22,PAGE_SHIFT		// shift pte index into position
 	;;
-(p7)	cmp.eq.or.andcm p6,p7=r20,r0		// was L3 entry NULL?
+(p7)	cmp.eq.or.andcm p6,p7=r20,r0		// was pmd_present(*pmd) == NULL?
-	dep r21=r19,r20,3,(PAGE_SHIFT-3)	// compute address of L4 page table entry
+	dep r21=r19,r20,3,(PAGE_SHIFT-3)	// r21=pte_offset(pmd,addr)
 	;;
-(p7)	ld8 r18=[r21]				// read the L4 PTE
+(p7)	ld8 r18=[r21]				// read *pte
-	mov r19=cr.isr				// cr.isr bit 0 tells us if this is an insn miss
+	mov r19=cr.isr				// cr.isr bit 32 tells us if this is an insn miss
 	;;
 (p7)	tbit.z p6,p7=r18,_PAGE_P_BIT		// page present bit cleared?
 	mov r22=cr.iha				// get the VHPT address that caused the TLB miss
@@ -202,25 +203,33 @@ ENTRY(vhpt_miss)
 	dv_serialize_data
 
 	/*
-	 * Re-check L2 and L3 pagetable.  If they changed, we may have received a ptc.g
+	 * Re-check pagetable entry.  If they changed, we may have received a ptc.g
 	 * between reading the pagetable and the "itc".  If so, flush the entry we
-	 * inserted and retry.
+	 * inserted and retry.  At this point, we have:
+	 *
+	 * r28 = equivalent of pud_offset(pgd, ifa)
+	 * r17 = equivalent of pmd_offset(pud, ifa)
+	 * r21 = equivalent of pte_offset(pmd, ifa)
+	 *
+	 * r29 = *pud
+	 * r20 = *pmd
+	 * r18 = *pte
 	 */
-	ld8 r25=[r21]				// read L4 entry again
+	ld8 r25=[r21]				// read *pte again
-	ld8 r26=[r17]				// read L3 PTE again
+	ld8 r26=[r17]				// read *pmd again
 #ifdef CONFIG_PGTABLE_4
-	ld8 r18=[r28]				// read L2 entry again
+	ld8 r19=[r28]				// read *pud again
 #endif
 	cmp.ne p6,p7=r0,r0
 	;;
-	cmp.ne.or.andcm p6,p7=r26,r20		// did L3 entry change
+	cmp.ne.or.andcm p6,p7=r26,r20		// did *pmd change
 #ifdef CONFIG_PGTABLE_4
-	cmp.ne.or.andcm p6,p7=r29,r18		// did L4 PTE change
+	cmp.ne.or.andcm p6,p7=r19,r29		// did *pud change
 #endif
 	mov r27=PAGE_SHIFT<<2
 	;;
 (p6)	ptc.l r22,r27				// purge PTE page translation
-(p7)	cmp.ne.or.andcm p6,p7=r25,r18		// did L4 PTE change
+(p7)	cmp.ne.or.andcm p6,p7=r25,r18		// did *pte change
 	;;
 (p6)	ptc.l r16,r27				// purge translation
 #endif
@@ -235,19 +244,19 @@ END(vhpt_miss)
 ENTRY(itlb_miss)
 	DBG_FAULT(1)
 	/*
-	 * The ITLB handler accesses the L3 PTE via the virtually mapped linear
+	 * The ITLB handler accesses the PTE via the virtually mapped linear
 	 * page table.  If a nested TLB miss occurs, we switch into physical
-	 * mode, walk the page table, and then re-execute the L3 PTE read
+	 * mode, walk the page table, and then re-execute the PTE read and
-	 * and go on normally after that.
+	 * go on normally after that.
 	 */
 	mov r16=cr.ifa				// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 .itlb_fault:
-	mov r17=cr.iha				// get virtual address of L3 PTE
+	mov r17=cr.iha				// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
-1:	ld8 r18=[r17]				// read L3 PTE
+1:	ld8 r18=[r17]				// read *pte
 	;;
 	mov b0=r29
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
@@ -262,7 +271,7 @@ ENTRY(itlb_miss)
 	 */
 	dv_serialize_data
 
-	ld8 r19=[r17]				// read L3 PTE again and see if same
+	ld8 r19=[r17]				// read *pte again and see if same
 	mov r20=PAGE_SHIFT<<2			// setup page size for purge
 	;;
 	cmp.ne p7,p0=r18,r19
@@ -279,19 +288,19 @@ END(itlb_miss)
 ENTRY(dtlb_miss)
 	DBG_FAULT(2)
 	/*
-	 * The DTLB handler accesses the L3 PTE via the virtually mapped linear
+	 * The DTLB handler accesses the PTE via the virtually mapped linear
 	 * page table.  If a nested TLB miss occurs, we switch into physical
-	 * mode, walk the page table, and then re-execute the L3 PTE read
+	 * mode, walk the page table, and then re-execute the PTE read and
-	 * and go on normally after that.
+	 * go on normally after that.
 	 */
 	mov r16=cr.ifa				// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 dtlb_fault:
-	mov r17=cr.iha				// get virtual address of L3 PTE
+	mov r17=cr.iha				// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
-1:	ld8 r18=[r17]				// read L3 PTE
+1:	ld8 r18=[r17]				// read *pte
 	;;
 	mov b0=r29
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
@@ -306,7 +315,7 @@ dtlb_fault:
 	 */
 	dv_serialize_data
 
-	ld8 r19=[r17]				// read L3 PTE again and see if same
+	ld8 r19=[r17]				// read *pte again and see if same
 	mov r20=PAGE_SHIFT<<2			// setup page size for purge
 	;;
 	cmp.ne p7,p0=r18,r19
@@ -420,7 +429,7 @@ ENTRY(nested_dtlb_miss)
 	 *		r30:	continuation address
 	 *		r31:	saved pr
 	 *
-	 * Output:	r17:	physical address of L3 PTE of faulting address
+	 * Output:	r17:	physical address of PTE of faulting address
 	 *		r29:	saved b0
 	 *		r30:	continuation address
 	 *		r31:	saved pr
@@ -450,33 +459,33 @@ ENTRY(nested_dtlb_miss)
 (p6)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT
 (p7)	shr.u r21=r21,PGDIR_SHIFT+PAGE_SHIFT-3
 	;;
-(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=PTA + IFA(33,42)*8
+(p6)	dep r17=r18,r19,3,(PAGE_SHIFT-3)	// r17=pgd_offset for region 5
-(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
+(p7)	dep r17=r18,r17,3,(PAGE_SHIFT-6)	// r17=pgd_offset for region[0-4]
 	cmp.eq p7,p6=0,r21			// unused address bits all zeroes?
 #ifdef CONFIG_PGTABLE_4
-	shr.u r18=r22,PUD_SHIFT			// shift L2 index into position
+	shr.u r18=r22,PUD_SHIFT			// shift pud index into position
 #else
-	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
 #endif
 	;;
-	ld8 r17=[r17]				// fetch the L1 entry (may be 0)
+	ld8 r17=[r17]				// get *pgd (may be 0)
 	;;
-(p7)	cmp.eq p6,p7=r17,r0			// was L1 entry NULL?
+(p7)	cmp.eq p6,p7=r17,r0			// was pgd_present(*pgd) == NULL?
-	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
+	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// r17=p[u|m]d_offset(pgd,addr)
 	;;
 #ifdef CONFIG_PGTABLE_4
-(p7)	ld8 r17=[r17]				// fetch the L2 entry (may be 0)
+(p7)	ld8 r17=[r17]				// get *pud (may be 0)
-	shr.u r18=r22,PMD_SHIFT			// shift L3 index into position
+	shr.u r18=r22,PMD_SHIFT			// shift pmd index into position
 	;;
-(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was L2 entry NULL?
+(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was pud_present(*pud) == NULL?
-	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// compute address of L2 page table entry
+	dep r17=r18,r17,3,(PAGE_SHIFT-3)	// r17=pmd_offset(pud,addr)
 	;;
 #endif
-(p7)	ld8 r17=[r17]				// fetch the L3 entry (may be 0)
+(p7)	ld8 r17=[r17]				// get *pmd (may be 0)
-	shr.u r19=r22,PAGE_SHIFT		// shift L4 index into position
+	shr.u r19=r22,PAGE_SHIFT		// shift pte index into position
 	;;
-(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was L3 entry NULL?
+(p7)	cmp.eq.or.andcm p6,p7=r17,r0		// was pmd_present(*pmd) == NULL?
-	dep r17=r19,r17,3,(PAGE_SHIFT-3)	// compute address of L4 page table entry
+	dep r17=r19,r17,3,(PAGE_SHIFT-3)	// r17=pte_offset(pmd,addr);
 (p6)	br.cond.spnt page_fault
 	mov b0=r30
 	br.sptk.many b0				// return to continuation point

arch/parisc/kernel/drivers.c

@@ -499,8 +499,12 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
 
 	dev = create_parisc_device(mod_path);
 	if (dev->id.hw_type != HPHW_FAULTY) {
-		printk("Two devices have hardware path %s.  Please file a bug with HP.\n"
+		printk(KERN_ERR "Two devices have hardware path [%s].  "
-			"In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev));
+				"IODC data for second device: "
+				"%02x%02x%02x%02x%02x%02x\n"
+				"Rearranging GSC cards sometimes helps\n",
+			parisc_pathname(dev), iodc_data[0], iodc_data[1],
+			iodc_data[3], iodc_data[4], iodc_data[5], iodc_data[6]);
 		return NULL;
 	}
 

arch/parisc/kernel/entry.S

@@ -1846,6 +1846,7 @@ sys_clone_wrapper:
 	ldo	-16(%r30),%r29		/* Reference param save area */
 #endif
 
+	/* WARNING - Clobbers r19 and r21, userspace must save these! */
 	STREG	%r2,PT_GR19(%r1)	/* save for child */
 	STREG	%r30,PT_GR21(%r1)
 	BL	sys_clone,%r2

arch/parisc/kernel/inventory.c

@@ -188,7 +188,7 @@ pat_query_module(ulong pcell_loc, ulong mod_index)
 	temp = pa_pdc_cell.cba;
 	dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
 	if (!dev) {
-		return PDC_NE_MOD;
+		return PDC_OK;
 	}
 
 	/* alloc_pa_dev sets dev->hpa */

arch/parisc/kernel/ioctl32.c

@@ -19,536 +19,6 @@
 #define CODE
 #include "compat_ioctl.c"
 
-/* Use this to get at 32-bit user passed pointers. 
-   See sys_sparc32.c for description about these. */
-#define A(__x) ((unsigned long)(__x))
-/* The same for use with copy_from_user() and copy_to_user(). */
-#define B(__x) ((void *)(unsigned long)(__x))
-
-#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE)
-/* This really belongs in include/linux/drm.h -DaveM */
-#include "../../../drivers/char/drm/drm.h"
-
-typedef struct drm32_version {
-	int    version_major;	  /* Major version			    */
-	int    version_minor;	  /* Minor version			    */
-	int    version_patchlevel;/* Patch level			    */
-	int    name_len;	  /* Length of name buffer		    */
-	u32    name;		  /* Name of driver			    */
-	int    date_len;	  /* Length of date buffer		    */
-	u32    date;		  /* User-space buffer to hold date	    */
-	int    desc_len;	  /* Length of desc buffer		    */
-	u32    desc;		  /* User-space buffer to hold desc	    */
-} drm32_version_t;
-#define DRM32_IOCTL_VERSION    DRM_IOWR(0x00, drm32_version_t)
-
-static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_version_t *uversion = (drm32_version_t *)arg;
-	char *name_ptr, *date_ptr, *desc_ptr;
-	u32 tmp1, tmp2, tmp3;
-	drm_version_t kversion;
-	mm_segment_t old_fs;
-	int ret;
-
-	memset(&kversion, 0, sizeof(kversion));
-	if (get_user(kversion.name_len, &uversion->name_len) ||
-	    get_user(kversion.date_len, &uversion->date_len) ||
-	    get_user(kversion.desc_len, &uversion->desc_len) ||
-	    get_user(tmp1, &uversion->name) ||
-	    get_user(tmp2, &uversion->date) ||
-	    get_user(tmp3, &uversion->desc))
-		return -EFAULT;
-
-	name_ptr = (char *) A(tmp1);
-	date_ptr = (char *) A(tmp2);
-	desc_ptr = (char *) A(tmp3);
-
-	ret = -ENOMEM;
-	if (kversion.name_len && name_ptr) {
-		kversion.name = kmalloc(kversion.name_len, GFP_KERNEL);
-		if (!kversion.name)
-			goto out;
-	}
-	if (kversion.date_len && date_ptr) {
-		kversion.date = kmalloc(kversion.date_len, GFP_KERNEL);
-		if (!kversion.date)
-			goto out;
-	}
-	if (kversion.desc_len && desc_ptr) {
-		kversion.desc = kmalloc(kversion.desc_len, GFP_KERNEL);
-		if (!kversion.desc)
-			goto out;
-	}
-
-        old_fs = get_fs();
-	set_fs(KERNEL_DS);
-        ret = sys_ioctl (fd, DRM_IOCTL_VERSION, (unsigned long)&kversion);
-        set_fs(old_fs);
-
-	if (!ret) {
-		if ((kversion.name &&
-		     copy_to_user(name_ptr, kversion.name, kversion.name_len)) ||
-		    (kversion.date &&
-		     copy_to_user(date_ptr, kversion.date, kversion.date_len)) ||
-		    (kversion.desc &&
-		     copy_to_user(desc_ptr, kversion.desc, kversion.desc_len)))
-			ret = -EFAULT;
-		if (put_user(kversion.version_major, &uversion->version_major) ||
-		    put_user(kversion.version_minor, &uversion->version_minor) ||
-		    put_user(kversion.version_patchlevel, &uversion->version_patchlevel) ||
-		    put_user(kversion.name_len, &uversion->name_len) ||
-		    put_user(kversion.date_len, &uversion->date_len) ||
-		    put_user(kversion.desc_len, &uversion->desc_len))
-			ret = -EFAULT;
-	}
-
-out:
-	kfree(kversion.name);
-	kfree(kversion.date);
-	kfree(kversion.desc);
-	return ret;
-}
-
-typedef struct drm32_unique {
-	int	unique_len;	  /* Length of unique			    */
-	u32	unique;		  /* Unique name for driver instantiation   */
-} drm32_unique_t;
-#define DRM32_IOCTL_GET_UNIQUE DRM_IOWR(0x01, drm32_unique_t)
-#define DRM32_IOCTL_SET_UNIQUE DRM_IOW( 0x10, drm32_unique_t)
-
-static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_unique_t *uarg = (drm32_unique_t *)arg;
-	drm_unique_t karg;
-	mm_segment_t old_fs;
-	char *uptr;
-	u32 tmp;
-	int ret;
-
-	if (get_user(karg.unique_len, &uarg->unique_len))
-		return -EFAULT;
-	karg.unique = NULL;
-
-	if (get_user(tmp, &uarg->unique))
-		return -EFAULT;
-
-	uptr = (char *) A(tmp);
-
-	if (uptr) {
-		karg.unique = kmalloc(karg.unique_len, GFP_KERNEL);
-		if (!karg.unique)
-			return -ENOMEM;
-		if (cmd == DRM32_IOCTL_SET_UNIQUE &&
-		    copy_from_user(karg.unique, uptr, karg.unique_len)) {
-			kfree(karg.unique);
-			return -EFAULT;
-		}
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	if (cmd == DRM32_IOCTL_GET_UNIQUE)
-		ret = sys_ioctl (fd, DRM_IOCTL_GET_UNIQUE, (unsigned long)&karg);
-	else
-		ret = sys_ioctl (fd, DRM_IOCTL_SET_UNIQUE, (unsigned long)&karg);
-        set_fs(old_fs);
-
-	if (!ret) {
-		if (cmd == DRM32_IOCTL_GET_UNIQUE &&
-		    uptr != NULL &&
-		    copy_to_user(uptr, karg.unique, karg.unique_len))
-			ret = -EFAULT;
-		if (put_user(karg.unique_len, &uarg->unique_len))
-			ret = -EFAULT;
-	}
-
-	kfree(karg.unique);
-	return ret;
-}
-
-typedef struct drm32_map {
-	u32		offset;	 /* Requested physical address (0 for SAREA)*/
-	u32		size;	 /* Requested physical size (bytes)	    */
-	drm_map_type_t	type;	 /* Type of memory to map		    */
-	drm_map_flags_t flags;	 /* Flags				    */
-	u32		handle;  /* User-space: "Handle" to pass to mmap    */
-				 /* Kernel-space: kernel-virtual address    */
-	int		mtrr;	 /* MTRR slot used			    */
-				 /* Private data			    */
-} drm32_map_t;
-#define DRM32_IOCTL_ADD_MAP    DRM_IOWR(0x15, drm32_map_t)
-
-static int drm32_addmap(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_map_t *uarg = (drm32_map_t *) arg;
-	drm_map_t karg;
-	mm_segment_t old_fs;
-	u32 tmp;
-	int ret;
-
-	ret  = get_user(karg.offset, &uarg->offset);
-	ret |= get_user(karg.size, &uarg->size);
-	ret |= get_user(karg.type, &uarg->type);
-	ret |= get_user(karg.flags, &uarg->flags);
-	ret |= get_user(tmp, &uarg->handle);
-	ret |= get_user(karg.mtrr, &uarg->mtrr);
-	if (ret)
-		return -EFAULT;
-
-	karg.handle = (void *) A(tmp);
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_ADD_MAP, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		ret  = put_user(karg.offset, &uarg->offset);
-		ret |= put_user(karg.size, &uarg->size);
-		ret |= put_user(karg.type, &uarg->type);
-		ret |= put_user(karg.flags, &uarg->flags);
-		tmp = (u32) (long)karg.handle;
-		ret |= put_user(tmp, &uarg->handle);
-		ret |= put_user(karg.mtrr, &uarg->mtrr);
-		if (ret)
-			ret = -EFAULT;
-	}
-
-	return ret;
-}
-
-typedef struct drm32_buf_info {
-	int	       count;	/* Entries in list			     */
-	u32	       list;    /* (drm_buf_desc_t *) */ 
-} drm32_buf_info_t;
-#define DRM32_IOCTL_INFO_BUFS  DRM_IOWR(0x18, drm32_buf_info_t)
-
-static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_info_t *uarg = (drm32_buf_info_t *)arg;
-	drm_buf_desc_t *ulist;
-	drm_buf_info_t karg;
-	mm_segment_t old_fs;
-	int orig_count, ret;
-	u32 tmp;
-
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp, &uarg->list))
-		return -EFAULT;
-
-	ulist = (drm_buf_desc_t *) A(tmp);
-
-	orig_count = karg.count;
-
-	karg.list = kmalloc(karg.count * sizeof(drm_buf_desc_t), GFP_KERNEL);
-	if (!karg.list)
-		return -EFAULT;
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_INFO_BUFS, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		if (karg.count <= orig_count &&
-		    (copy_to_user(ulist, karg.list,
-				  karg.count * sizeof(drm_buf_desc_t))))
-			ret = -EFAULT;
-		if (put_user(karg.count, &uarg->count))
-			ret = -EFAULT;
-	}
-
-	kfree(karg.list);
-	return ret;
-}
-
-typedef struct drm32_buf_free {
-	int	       count;
-	u32	       list;	/* (int *) */
-} drm32_buf_free_t;
-#define DRM32_IOCTL_FREE_BUFS  DRM_IOW( 0x1a, drm32_buf_free_t)
-
-static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_free_t *uarg = (drm32_buf_free_t *)arg;
-	drm_buf_free_t karg;
-	mm_segment_t old_fs;
-	int *ulist;
-	int ret;
-	u32 tmp;
-
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp, &uarg->list))
-		return -EFAULT;
-
-	ulist = (int *) A(tmp);
-
-	karg.list = kmalloc(karg.count * sizeof(int), GFP_KERNEL);
-	if (!karg.list)
-		return -ENOMEM;
-
-	ret = -EFAULT;
-	if (copy_from_user(karg.list, ulist, (karg.count * sizeof(int))))
-		goto out;
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_FREE_BUFS, (unsigned long) &karg);
-	set_fs(old_fs);
-
-out:
-	kfree(karg.list);
-	return ret;
-}
-
-typedef struct drm32_buf_pub {
-	int		  idx;	       /* Index into master buflist	     */
-	int		  total;       /* Buffer size			     */
-	int		  used;	       /* Amount of buffer in use (for DMA)  */
-	u32		  address;     /* Address of buffer (void *)	     */
-} drm32_buf_pub_t;
-
-typedef struct drm32_buf_map {
-	int	      count;	/* Length of buflist			    */
-	u32	      virtual;	/* Mmaped area in user-virtual (void *)	    */
-	u32 	      list;	/* Buffer information (drm_buf_pub_t *)	    */
-} drm32_buf_map_t;
-#define DRM32_IOCTL_MAP_BUFS   DRM_IOWR(0x19, drm32_buf_map_t)
-
-static int drm32_map_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_buf_map_t *uarg = (drm32_buf_map_t *)arg;
-	drm32_buf_pub_t *ulist;
-	drm_buf_map_t karg;
-	mm_segment_t old_fs;
-	int orig_count, ret, i;
-	u32 tmp1, tmp2;
-
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp1, &uarg->virtual) ||
-	    get_user(tmp2, &uarg->list))
-		return -EFAULT;
-
-	karg.virtual = (void *) A(tmp1);
-	ulist = (drm32_buf_pub_t *) A(tmp2);
-
-	orig_count = karg.count;
-
-	karg.list = kmalloc(karg.count * sizeof(drm_buf_pub_t), GFP_KERNEL);
-	if (!karg.list)
-		return -ENOMEM;
-
-	ret = -EFAULT;
-	for (i = 0; i < karg.count; i++) {
-		if (get_user(karg.list[i].idx, &ulist[i].idx) ||
-		    get_user(karg.list[i].total, &ulist[i].total) ||
-		    get_user(karg.list[i].used, &ulist[i].used) ||
-		    get_user(tmp1, &ulist[i].address))
-			goto out;
-
-		karg.list[i].address = (void *) A(tmp1);
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_MAP_BUFS, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		for (i = 0; i < orig_count; i++) {
-			tmp1 = (u32) (long) karg.list[i].address;
-			if (put_user(karg.list[i].idx, &ulist[i].idx) ||
-			    put_user(karg.list[i].total, &ulist[i].total) ||
-			    put_user(karg.list[i].used, &ulist[i].used) ||
-			    put_user(tmp1, &ulist[i].address)) {
-				ret = -EFAULT;
-				goto out;
-			}
-		}
-		if (put_user(karg.count, &uarg->count))
-			ret = -EFAULT;
-	}
-
-out:
-	kfree(karg.list);
-	return ret;
-}
-
-typedef struct drm32_dma {
-				/* Indices here refer to the offset into
-				   buflist in drm_buf_get_t.  */
-	int		context;	  /* Context handle		    */
-	int		send_count;	  /* Number of buffers to send	    */
-	u32		send_indices;	  /* List of handles to buffers (int *) */
-	u32		send_sizes;	  /* Lengths of data to send (int *) */
-	drm_dma_flags_t flags;		  /* Flags			    */
-	int		request_count;	  /* Number of buffers requested    */
-	int		request_size;	  /* Desired size for buffers	    */
-	u32		request_indices;  /* Buffer information (int *)	    */
-	u32		request_sizes;    /* (int *) */
-	int		granted_count;	  /* Number of buffers granted	    */
-} drm32_dma_t;
-#define DRM32_IOCTL_DMA	     DRM_IOWR(0x29, drm32_dma_t)
-
-/* RED PEN	The DRM layer blindly dereferences the send/request
- * 		indice/size arrays even though they are userland
- * 		pointers.  -DaveM
- */
-static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_dma_t *uarg = (drm32_dma_t *) arg;
-	int *u_si, *u_ss, *u_ri, *u_rs;
-	drm_dma_t karg;
-	mm_segment_t old_fs;
-	int ret;
-	u32 tmp1, tmp2, tmp3, tmp4;
-
-	karg.send_indices = karg.send_sizes = NULL;
-	karg.request_indices = karg.request_sizes = NULL;
-
-	if (get_user(karg.context, &uarg->context) ||
-	    get_user(karg.send_count, &uarg->send_count) ||
-	    get_user(tmp1, &uarg->send_indices) ||
-	    get_user(tmp2, &uarg->send_sizes) ||
-	    get_user(karg.flags, &uarg->flags) ||
-	    get_user(karg.request_count, &uarg->request_count) ||
-	    get_user(karg.request_size, &uarg->request_size) ||
-	    get_user(tmp3, &uarg->request_indices) ||
-	    get_user(tmp4, &uarg->request_sizes) ||
-	    get_user(karg.granted_count, &uarg->granted_count))
-		return -EFAULT;
-
-	u_si = (int *) A(tmp1);
-	u_ss = (int *) A(tmp2);
-	u_ri = (int *) A(tmp3);
-	u_rs = (int *) A(tmp4);
-
-	if (karg.send_count) {
-		karg.send_indices = kmalloc(karg.send_count * sizeof(int), GFP_KERNEL);
-		karg.send_sizes = kmalloc(karg.send_count * sizeof(int), GFP_KERNEL);
-
-		ret = -ENOMEM;
-		if (!karg.send_indices || !karg.send_sizes)
-			goto out;
-
-		ret = -EFAULT;
-		if (copy_from_user(karg.send_indices, u_si,
-				   (karg.send_count * sizeof(int))) ||
-		    copy_from_user(karg.send_sizes, u_ss,
-				   (karg.send_count * sizeof(int))))
-			goto out;
-	}
-
-	if (karg.request_count) {
-		karg.request_indices = kmalloc(karg.request_count * sizeof(int), GFP_KERNEL);
-		karg.request_sizes = kmalloc(karg.request_count * sizeof(int), GFP_KERNEL);
-
-		ret = -ENOMEM;
-		if (!karg.request_indices || !karg.request_sizes)
-			goto out;
-
-		ret = -EFAULT;
-		if (copy_from_user(karg.request_indices, u_ri,
-				   (karg.request_count * sizeof(int))) ||
-		    copy_from_user(karg.request_sizes, u_rs,
-				   (karg.request_count * sizeof(int))))
-			goto out;
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_DMA, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		if (put_user(karg.context, &uarg->context) ||
-		    put_user(karg.send_count, &uarg->send_count) ||
-		    put_user(karg.flags, &uarg->flags) ||
-		    put_user(karg.request_count, &uarg->request_count) ||
-		    put_user(karg.request_size, &uarg->request_size) ||
-		    put_user(karg.granted_count, &uarg->granted_count))
-			ret = -EFAULT;
-
-		if (karg.send_count) {
-			if (copy_to_user(u_si, karg.send_indices,
-					 (karg.send_count * sizeof(int))) ||
-			    copy_to_user(u_ss, karg.send_sizes,
-					 (karg.send_count * sizeof(int))))
-				ret = -EFAULT;
-		}
-		if (karg.request_count) {
-			if (copy_to_user(u_ri, karg.request_indices,
-					 (karg.request_count * sizeof(int))) ||
-			    copy_to_user(u_rs, karg.request_sizes,
-					 (karg.request_count * sizeof(int))))
-				ret = -EFAULT;
-		}
-	}
-
-out:
-	kfree(karg.send_indices);
-	kfree(karg.send_sizes);
-	kfree(karg.request_indices);
-	kfree(karg.request_sizes);
-	return ret;
-}
-
-typedef struct drm32_ctx_res {
-	int		count;
-	u32		contexts; /* (drm_ctx_t *) */
-} drm32_ctx_res_t;
-#define DRM32_IOCTL_RES_CTX    DRM_IOWR(0x26, drm32_ctx_res_t)
-
-static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg)
-{
-	drm32_ctx_res_t *uarg = (drm32_ctx_res_t *) arg;
-	drm_ctx_t *ulist;
-	drm_ctx_res_t karg;
-	mm_segment_t old_fs;
-	int orig_count, ret;
-	u32 tmp;
-
-	karg.contexts = NULL;
-	if (get_user(karg.count, &uarg->count) ||
-	    get_user(tmp, &uarg->contexts))
-		return -EFAULT;
-
-	ulist = (drm_ctx_t *) A(tmp);
-
-	orig_count = karg.count;
-	if (karg.count && ulist) {
-		karg.contexts = kmalloc((karg.count * sizeof(drm_ctx_t)), GFP_KERNEL);
-		if (!karg.contexts)
-			return -ENOMEM;
-		if (copy_from_user(karg.contexts, ulist,
-				   (karg.count * sizeof(drm_ctx_t)))) {
-			kfree(karg.contexts);
-			return -EFAULT;
-		}
-	}
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, DRM_IOCTL_RES_CTX, (unsigned long) &karg);
-	set_fs(old_fs);
-
-	if (!ret) {
-		if (orig_count) {
-			if (copy_to_user(ulist, karg.contexts,
-					 (orig_count * sizeof(drm_ctx_t))))
-				ret = -EFAULT;
-		}
-		if (put_user(karg.count, &uarg->count))
-			ret = -EFAULT;
-	}
-
-	kfree(karg.contexts);
-	return ret;
-}
-
-#endif
-
 #define HANDLE_IOCTL(cmd, handler) { cmd, (ioctl_trans_handler_t)handler, NULL },
 #define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd, sys_ioctl) 
 
@@ -561,11 +31,6 @@ IOCTL_TABLE_START
 #define DECLARES
 #include "compat_ioctl.c"
 
-/* PA-specific ioctls */
-COMPATIBLE_IOCTL(PA_PERF_ON)
-COMPATIBLE_IOCTL(PA_PERF_OFF)
-COMPATIBLE_IOCTL(PA_PERF_VERSION)
-
 /* And these ioctls need translation */
 HANDLE_IOCTL(SIOCGPPPSTATS, dev_ifsioc)
 HANDLE_IOCTL(SIOCGPPPCSTATS, dev_ifsioc)
@@ -590,17 +55,6 @@ HANDLE_IOCTL(RTC_EPOCH_READ, w_long)
 COMPATIBLE_IOCTL(RTC_EPOCH_SET)
 #endif
 
-#if defined(CONFIG_DRM) || defined(CONFIG_DRM_MODULE)
-HANDLE_IOCTL(DRM32_IOCTL_VERSION, drm32_version);
-HANDLE_IOCTL(DRM32_IOCTL_GET_UNIQUE, drm32_getsetunique);
-HANDLE_IOCTL(DRM32_IOCTL_SET_UNIQUE, drm32_getsetunique);
-HANDLE_IOCTL(DRM32_IOCTL_ADD_MAP, drm32_addmap);
-HANDLE_IOCTL(DRM32_IOCTL_INFO_BUFS, drm32_info_bufs);
-HANDLE_IOCTL(DRM32_IOCTL_FREE_BUFS, drm32_free_bufs);
-HANDLE_IOCTL(DRM32_IOCTL_MAP_BUFS, drm32_map_bufs);
-HANDLE_IOCTL(DRM32_IOCTL_DMA, drm32_dma);
-HANDLE_IOCTL(DRM32_IOCTL_RES_CTX, drm32_res_ctx);
-#endif /* DRM */
 IOCTL_TABLE_END
 
 int ioctl_table_size = ARRAY_SIZE(ioctl_start);

arch/parisc/kernel/irq.c

@@ -30,6 +30,9 @@
 #include <linux/seq_file.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
+#include <asm/io.h>
+
+#include <asm/smp.h>
 
 #undef PARISC_IRQ_CR16_COUNTS
 
@@ -43,26 +46,34 @@ extern irqreturn_t ipi_interrupt(int, void *, struct pt_regs *);
 */
 static volatile unsigned long cpu_eiem = 0;
 
-static void cpu_set_eiem(void *info)
+static void cpu_disable_irq(unsigned int irq)
-{
-	set_eiem((unsigned long) info);
-}
-
-static inline void cpu_disable_irq(unsigned int irq)
 {
 	unsigned long eirr_bit = EIEM_MASK(irq);
 
 	cpu_eiem &= ~eirr_bit;
-        on_each_cpu(cpu_set_eiem, (void *) cpu_eiem, 1, 1);
+	/* Do nothing on the other CPUs.  If they get this interrupt,
+	 * The & cpu_eiem in the do_cpu_irq_mask() ensures they won't
+	 * handle it, and the set_eiem() at the bottom will ensure it
+	 * then gets disabled */
 }
 
 static void cpu_enable_irq(unsigned int irq)
 {
 	unsigned long eirr_bit = EIEM_MASK(irq);
 
-	mtctl(eirr_bit, 23);	/* clear EIRR bit before unmasking */
 	cpu_eiem |= eirr_bit;
-        on_each_cpu(cpu_set_eiem, (void *) cpu_eiem, 1, 1);
+
+	/* FIXME: while our interrupts aren't nested, we cannot reset
+	 * the eiem mask if we're already in an interrupt.  Once we
+	 * implement nested interrupts, this can go away
+	 */
+	if (!in_interrupt())
+		set_eiem(cpu_eiem);
+
+	/* This is just a simple NOP IPI.  But what it does is cause
+	 * all the other CPUs to do a set_eiem(cpu_eiem) at the end
+	 * of the interrupt handler */
+	smp_send_all_nop();
 }
 
 static unsigned int cpu_startup_irq(unsigned int irq)
@@ -74,6 +85,35 @@ static unsigned int cpu_startup_irq(unsigned int irq)
 void no_ack_irq(unsigned int irq) { }
 void no_end_irq(unsigned int irq) { }
 
+#ifdef CONFIG_SMP
+int cpu_check_affinity(unsigned int irq, cpumask_t *dest)
+{
+	int cpu_dest;
+
+	/* timer and ipi have to always be received on all CPUs */
+	if (irq == TIMER_IRQ || irq == IPI_IRQ) {
+		/* Bad linux design decision.  The mask has already
+		 * been set; we must reset it */
+		irq_affinity[irq] = CPU_MASK_ALL;
+		return -EINVAL;
+	}
+
+	/* whatever mask they set, we just allow one CPU */
+	cpu_dest = first_cpu(*dest);
+	*dest = cpumask_of_cpu(cpu_dest);
+
+	return 0;
+}
+
+static void cpu_set_affinity_irq(unsigned int irq, cpumask_t dest)
+{
+	if (cpu_check_affinity(irq, &dest))
+		return;
+
+	irq_affinity[irq] = dest;
+}
+#endif
+
 static struct hw_interrupt_type cpu_interrupt_type = {
 	.typename	= "CPU",
 	.startup	= cpu_startup_irq,
@@ -82,7 +122,9 @@ static struct hw_interrupt_type cpu_interrupt_type = {
 	.disable	= cpu_disable_irq,
 	.ack		= no_ack_irq,
 	.end		= no_end_irq,
-//	.set_affinity	= cpu_set_affinity_irq,
+#ifdef CONFIG_SMP
+	.set_affinity	= cpu_set_affinity_irq,
+#endif
 };
 
 int show_interrupts(struct seq_file *p, void *v)
@@ -219,6 +261,17 @@ int txn_alloc_irq(unsigned int bits_wide)
 	return -1;
 }
 
+
+unsigned long txn_affinity_addr(unsigned int irq, int cpu)
+{
+#ifdef CONFIG_SMP
+	irq_affinity[irq] = cpumask_of_cpu(cpu);
+#endif
+
+	return cpu_data[cpu].txn_addr;
+}
+
+
 unsigned long txn_alloc_addr(unsigned int virt_irq)
 {
 	static int next_cpu = -1;
@@ -233,7 +286,7 @@ unsigned long txn_alloc_addr(unsigned int virt_irq)
 	if (next_cpu >= NR_CPUS) 
 		next_cpu = 0;	/* nothing else, assign monarch */
 
-	return cpu_data[next_cpu].txn_addr;
+	return txn_affinity_addr(virt_irq, next_cpu);
 }
 
 
@@ -250,10 +303,11 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 	irq_enter();
 
 	/*
-	 * Only allow interrupt processing to be interrupted by the
+	 * Don't allow TIMER or IPI nested interrupts.
-	 * timer tick
+	 * Allowing any single interrupt to nest can lead to that CPU
+	 * handling interrupts with all enabled interrupts unmasked.
 	 */
-	set_eiem(EIEM_MASK(TIMER_IRQ));
+	set_eiem(0UL);
 
 	/* 1) only process IRQs that are enabled/unmasked (cpu_eiem)
 	 * 2) We loop here on EIRR contents in order to avoid
@@ -267,23 +321,41 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 		if (!eirr_val)
 			break;
 
-		if (eirr_val & EIEM_MASK(TIMER_IRQ))
-			set_eiem(0);
-
 		mtctl(eirr_val, 23); /* reset bits we are going to process */
 
 		/* Work our way from MSb to LSb...same order we alloc EIRs */
 		for (irq = TIMER_IRQ; eirr_val && bit; bit>>=1, irq++) {
+#ifdef CONFIG_SMP
+			cpumask_t dest = irq_affinity[irq];
+#endif
 			if (!(bit & eirr_val))
 				continue;
 
 			/* clear bit in mask - can exit loop sooner */
 			eirr_val &= ~bit;
 
+#ifdef CONFIG_SMP
+			/* FIXME: because generic set affinity mucks
+			 * with the affinity before sending it to us
+			 * we can get the situation where the affinity is
+			 * wrong for our CPU type interrupts */
+			if (irq != TIMER_IRQ && irq != IPI_IRQ &&
+			    !cpu_isset(smp_processor_id(), dest)) {
+				int cpu = first_cpu(dest);
+
+				printk(KERN_DEBUG "redirecting irq %d from CPU %d to %d\n",
+				       irq, smp_processor_id(), cpu);
+				gsc_writel(irq + CPU_IRQ_BASE,
+					   cpu_data[cpu].hpa);
+				continue;
+			}
+#endif
+
 			__do_IRQ(irq, regs);
 		}
 	}
-	set_eiem(cpu_eiem);
+
+	set_eiem(cpu_eiem);	/* restore original mask */
 	irq_exit();
 }
 
@@ -291,12 +363,14 @@ void do_cpu_irq_mask(struct pt_regs *regs)
 static struct irqaction timer_action = {
 	.handler = timer_interrupt,
 	.name = "timer",
+	.flags = SA_INTERRUPT,
 };
 
 #ifdef CONFIG_SMP
 static struct irqaction ipi_action = {
 	.handler = ipi_interrupt,
 	.name = "IPI",
+	.flags = SA_INTERRUPT,
 };
 #endif
 

arch/parisc/kernel/perf.c

@@ -196,8 +196,7 @@ static int perf_open(struct inode *inode, struct file *file);
 static ssize_t perf_read(struct file *file, char __user *buf, size_t cnt, loff_t *ppos);
 static ssize_t perf_write(struct file *file, const char __user *buf, size_t count, 
 	loff_t *ppos);
-static int perf_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-	unsigned long arg);
 static void perf_start_counters(void);
 static int perf_stop_counters(uint32_t *raddr);
 static struct rdr_tbl_ent * perf_rdr_get_entry(uint32_t rdr_num);
@@ -438,48 +437,56 @@ static void perf_patch_images(void)
  * must be running on the processor that you wish to change.
  */
 
-static int perf_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-	unsigned long arg)
 {
 	long error_start;
-	uint32_t raddr[4];	
+	uint32_t raddr[4];
+	int error = 0;
 
+	lock_kernel();
 	switch (cmd) {
 
 	    case PA_PERF_ON:
 			/* Start the counters */
 			perf_start_counters();
-			return 0;
+			break;
 
 	    case PA_PERF_OFF:
 			error_start = perf_stop_counters(raddr);
 			if (error_start != 0) {
 				printk(KERN_ERR "perf_off: perf_stop_counters = %ld\n", error_start);
-				return -EFAULT;	
+				error = -EFAULT;
+				break;
 			}
 
 			/* copy out the Counters */
 			if (copy_to_user((void __user *)arg, raddr, 
 					sizeof (raddr)) != 0) {
-				return -EFAULT;
+				error =  -EFAULT;
+				break;
 			}
-			return 0;
+			break;
 
 	    case PA_PERF_VERSION:
   	  		/* Return the version # */
-			return put_user(PERF_VERSION, (int *)arg);
+			error = put_user(PERF_VERSION, (int *)arg);
+			break;
 
 	    default:
-  	 		break;
+  	 		error = -ENOTTY;
 	}
-	return -ENOTTY;
+
+	unlock_kernel();
+
+	return error;
 }
 
 static struct file_operations perf_fops = {
 	.llseek = no_llseek,
 	.read = perf_read,
 	.write = perf_write,
-	.ioctl = perf_ioctl,
+	.unlocked_ioctl = perf_ioctl,
+	.compat_ioctl = perf_ioctl,
 	.open = perf_open,
 	.release = perf_release
 };

arch/parisc/kernel/ptrace.c

@@ -264,6 +264,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		 * sigkill.  perhaps it should be put in the status
 		 * that it wants to exit.
 		 */
+		ret = 0;
 		DBG("sys_ptrace(KILL)\n");
 		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
 			goto out_tsk;
@@ -344,11 +345,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 
 	case PTRACE_GETEVENTMSG:
                 ret = put_user(child->ptrace_message, (unsigned int __user *) data);
-		goto out;
+		goto out_tsk;
 
 	default:
 		ret = ptrace_request(child, request, addr, data);
-		goto out;
+		goto out_tsk;
 	}
 
 out_wake_notrap:

arch/parisc/kernel/signal.c

@@ -296,7 +296,6 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	struct rt_sigframe __user *frame;
 	unsigned long rp, usp;
 	unsigned long haddr, sigframe_size;
-	struct siginfo si;
 	int err = 0;
 #ifdef __LP64__
 	compat_int_t compat_val;

arch/parisc/kernel/smp.c

@@ -181,12 +181,19 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		while (ops) {
 			unsigned long which = ffz(~ops);
 
+			ops &= ~(1 << which);
+
 			switch (which) {
+			case IPI_NOP:
+#if (kDEBUG>=100)
+				printk(KERN_DEBUG "CPU%d IPI_NOP\n",this_cpu);
+#endif /* kDEBUG */
+				break;
+				
 			case IPI_RESCHEDULE:
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_RESCHEDULE\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_RESCHEDULE);
 				/*
 				 * Reschedule callback.  Everything to be
 				 * done is done by the interrupt return path.
@@ -197,7 +204,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_CALL_FUNC\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CALL_FUNC);
 				{
 					volatile struct smp_call_struct *data;
 					void (*func)(void *info);
@@ -231,7 +237,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_CPU_START\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CPU_START);
 #ifdef ENTRY_SYS_CPUS
 				p->state = STATE_RUNNING;
 #endif
@@ -241,7 +246,6 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d IPI_CPU_STOP\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CPU_STOP);
 #ifdef ENTRY_SYS_CPUS
 #else
 				halt_processor();
@@ -252,13 +256,11 @@ ipi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 #if (kDEBUG>=100)
 				printk(KERN_DEBUG "CPU%d is alive!\n",this_cpu);
 #endif /* kDEBUG */
-				ops &= ~(1 << IPI_CPU_TEST);
 				break;
 
 			default:
 				printk(KERN_CRIT "Unknown IPI num on CPU%d: %lu\n",
 					this_cpu, which);
-				ops &= ~(1 << which);
 				return IRQ_NONE;
 			} /* Switch */
 		} /* while (ops) */
@@ -312,6 +314,12 @@ smp_send_start(void)	{ send_IPI_allbutself(IPI_CPU_START); }
 void 
 smp_send_reschedule(int cpu) { send_IPI_single(cpu, IPI_RESCHEDULE); }
 
+void
+smp_send_all_nop(void)
+{
+	send_IPI_allbutself(IPI_NOP);
+}
+
 
 /**
  * Run a function on all other CPUs.
@@ -338,6 +346,10 @@ smp_call_function (void (*func) (void *info), void *info, int retry, int wait)
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
+
+	/* can also deadlock if IPIs are disabled */
+	WARN_ON((get_eiem() & (1UL<<(CPU_IRQ_MAX - IPI_IRQ))) == 0);
+
 	
 	data.func = func;
 	data.info = info;

arch/parisc/kernel/syscall.S

@@ -164,7 +164,7 @@ linux_gateway_entry:
 #endif
 	STREG	%r2,  TASK_PT_GR30(%r1)		/* ... and save it */
 	
-	STREG	%r20, TASK_PT_GR20(%r1)
+	STREG	%r20, TASK_PT_GR20(%r1)		/* Syscall number */
 	STREG	%r21, TASK_PT_GR21(%r1)
 	STREG	%r22, TASK_PT_GR22(%r1)
 	STREG	%r23, TASK_PT_GR23(%r1)		/* 4th argument */
@@ -527,6 +527,7 @@ lws_compare_and_swap:
 		We *must* giveup this call and fail.
 	*/
 	ldw	4(%sr2,%r20), %r28			/* Load thread register */
+	/* WARNING: If cr27 cycles to the same value we have problems */
 	mfctl	%cr27, %r21				/* Get current thread register */
 	cmpb,<>,n	%r21, %r28, cas_lock		/* Called recursive? */
 	b	lws_exit				/* Return error! */

block/as-iosched.c

@@ -1,6 +1,4 @@
 /*
- *  linux/drivers/block/as-iosched.c
- *
  *  Anticipatory & deadline i/o scheduler.
  *
  *  Copyright (C) 2002 Jens Axboe <axboe@suse.de>

block/cfq-iosched.c

@@ -1,6 +1,4 @@
 /*
- *  linux/drivers/block/cfq-iosched.c
- *
  *  CFQ, or complete fairness queueing, disk scheduler.
  *
  *  Based on ideas from a previously unfinished io

block/deadline-iosched.c

@@ -1,6 +1,4 @@
 /*
- *  linux/drivers/block/deadline-iosched.c
- *
  *  Deadline i/o scheduler.
  *
  *  Copyright (C) 2002 Jens Axboe <axboe@suse.de>

block/elevator.c

@@ -1,6 +1,4 @@
 /*
- *  linux/drivers/block/elevator.c
- *
  *  Block device elevator/IO-scheduler.
  *
  *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE

block/ll_rw_blk.c

@@ -1,6 +1,4 @@
 /*
- *  linux/drivers/block/ll_rw_blk.c
- *
  * Copyright (C) 1991, 1992 Linus Torvalds
  * Copyright (C) 1994,      Karl Keyte: Added support for disk statistics
  * Elevator latency, (C) 2000  Andrea Arcangeli <andrea@suse.de> SuSE

drivers/block/cciss.c

@@ -1017,10 +1017,11 @@ static int cciss_ioctl(struct inode *inode, struct file *filep,
 				status = -ENOMEM;
 				goto cleanup1;
 			}
-			if (ioc->Request.Type.Direction == XFER_WRITE &&
+			if (ioc->Request.Type.Direction == XFER_WRITE) {
-				copy_from_user(buff[sg_used], data_ptr, sz)) {
+				if (copy_from_user(buff[sg_used], data_ptr, sz)) {
 					status = -ENOMEM;
-					goto cleanup1;			
+					goto cleanup1;
+				}
 			} else {
 				memset(buff[sg_used], 0, sz);
 			}
@@ -1138,8 +1139,15 @@ static int revalidate_allvol(ctlr_info_t *host)
 
 	for(i=0; i< NWD; i++) {
 		struct gendisk *disk = host->gendisk[i];
-		if (disk->flags & GENHD_FL_UP)
+		if (disk) {
-			del_gendisk(disk);
+			request_queue_t *q = disk->queue;
+
+			if (disk->flags & GENHD_FL_UP)
+				del_gendisk(disk);
+			if (q)
+				blk_cleanup_queue(q);
+			put_disk(disk);
+		}
 	}
 
         /*
@@ -1453,10 +1461,13 @@ static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
 	 * allows us to delete disk zero but keep the controller registered.
 	*/
 	if (h->gendisk[0] != disk){
-		if (disk->flags & GENHD_FL_UP){
+		if (disk) {
-			blk_cleanup_queue(disk->queue);
+			request_queue_t *q = disk->queue;
-		del_gendisk(disk);
+			if (disk->flags & GENHD_FL_UP)
-			drv->queue = NULL;
+				del_gendisk(disk);
+			if (q)	
+				blk_cleanup_queue(q);
+			put_disk(disk);	
 		}
 	}
 
@@ -3225,9 +3236,14 @@ static void __devexit cciss_remove_one (struct pci_dev *pdev)
 	/* remove it from the disk list */
 	for (j = 0; j < NWD; j++) {
 		struct gendisk *disk = hba[i]->gendisk[j];
-		if (disk->flags & GENHD_FL_UP) {
+		if (disk) {
-			del_gendisk(disk);
+			request_queue_t *q = disk->queue;
-			blk_cleanup_queue(disk->queue);
+
+			if (disk->flags & GENHD_FL_UP) 
+				del_gendisk(disk);
+			if (q)
+				blk_cleanup_queue(q);
+			put_disk(disk);
 		}
 	}
 

drivers/ide/Kconfig

@@ -625,7 +625,7 @@ config BLK_DEV_NS87415
 	tristate "NS87415 chipset support"
 	help
 	  This driver adds detection and support for the NS87415 chip
-	  (used in SPARC64, among others).
+	  (used mainly on SPARC64 and PA-RISC machines).
 
 	  Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
 

drivers/ide/ide-cd.c

@@ -3328,8 +3328,8 @@ static ide_proc_entry_t idecd_proc[] = {
 #endif
 
 static ide_driver_t ide_cdrom_driver = {
-	.owner			= THIS_MODULE,
 	.gen_driver = {
+		.owner		= THIS_MODULE,
 		.name		= "ide-cdrom",
 		.bus		= &ide_bus_type,
 		.probe		= ide_cd_probe,

drivers/ide/ide-disk.c

@@ -1089,8 +1089,8 @@ static void ide_device_shutdown(struct device *dev)
 }
 
 static ide_driver_t idedisk_driver = {
-	.owner			= THIS_MODULE,
 	.gen_driver = {
+		.owner		= THIS_MODULE,
 		.name		= "ide-disk",
 		.bus		= &ide_bus_type,
 		.probe		= ide_disk_probe,

drivers/ide/ide-floppy.c

@@ -1925,8 +1925,8 @@ static ide_proc_entry_t idefloppy_proc[] = {
 static int ide_floppy_probe(struct device *);
 
 static ide_driver_t idefloppy_driver = {
-	.owner			= THIS_MODULE,
 	.gen_driver = {
+		.owner		= THIS_MODULE,
 		.name		= "ide-floppy",
 		.bus		= &ide_bus_type,
 		.probe		= ide_floppy_probe,

drivers/ide/ide-lib.c

@@ -410,10 +410,10 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
 {
 	u64 addr = BLK_BOUNCE_HIGH;	/* dma64_addr_t */
 
-	if (on && drive->media == ide_disk) {
+	if (!PCI_DMA_BUS_IS_PHYS) {
-		if (!PCI_DMA_BUS_IS_PHYS)
+		addr = BLK_BOUNCE_ANY;
-			addr = BLK_BOUNCE_ANY;
+	} else if (on && drive->media == ide_disk) {
-		else if (HWIF(drive)->pci_dev)
+		if (HWIF(drive)->pci_dev)
 			addr = HWIF(drive)->pci_dev->dma_mask;
 	}
 

drivers/ide/ide-tape.c

@@ -4748,8 +4748,8 @@ static ide_proc_entry_t idetape_proc[] = {
 static int ide_tape_probe(struct device *);
 
 static ide_driver_t idetape_driver = {
-	.owner			= THIS_MODULE,
 	.gen_driver = {
+		.owner		= THIS_MODULE,
 		.name		= "ide-tape",
 		.bus		= &ide_bus_type,
 		.probe		= ide_tape_probe,

drivers/ide/pci/aec62xx.c

@@ -65,23 +65,6 @@ static struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
 #define BUSCLOCK(D)	\
 	((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D)))
 
-#if 0
-		if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
-			(void) pci_read_config_byte(dev, 0x54, &art);
-			p += sprintf(p, "DMA Mode:       %s(%s)",
-				(c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO",
-				(art&0x02)?"2":(art&0x01)?"1":"0");
-			p += sprintf(p, "          %s(%s)",
-				(c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO",
-				(art&0x08)?"2":(art&0x04)?"1":"0");
-			p += sprintf(p, "         %s(%s)",
-				(c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO",
-				(art&0x20)?"2":(art&0x10)?"1":"0");
-			p += sprintf(p, "           %s(%s)\n",
-				(c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO",
-				(art&0x80)?"2":(art&0x40)?"1":"0");
-		} else {
-#endif
 
 /*
  * TO DO: active tuning and correction of cards without a bios.
@@ -112,13 +95,9 @@ static u8 aec62xx_ratemask (ide_drive_t *drive)
 	switch(hwif->pci_dev->device) {
 		case PCI_DEVICE_ID_ARTOP_ATP865:
 		case PCI_DEVICE_ID_ARTOP_ATP865R:
-#if 0
-			mode = (hwif->INB(hwif->dma_master) & 0x10) ? 4 : 3;
-#else
 			mode = (hwif->INB(((hwif->channel) ?
 					hwif->mate->dma_status :
 					hwif->dma_status)) & 0x10) ? 4 : 3;
-#endif
 			break;
 		case PCI_DEVICE_ID_ARTOP_ATP860:
 		case PCI_DEVICE_ID_ARTOP_ATP860R:
@@ -263,35 +242,9 @@ static int aec62xx_irq_timeout (ide_drive_t *drive)
 		case PCI_DEVICE_ID_ARTOP_ATP865:
 		case PCI_DEVICE_ID_ARTOP_ATP865R:
 			printk(" AEC62XX time out ");
-#if 0
-			{
-				int i = 0;
-				u8 reg49h = 0;
-				pci_read_config_byte(HWIF(drive)->pci_dev, 0x49, &reg49h);
-				for (i=0;i<256;i++)
-					pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h|0x10);
-				pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h & ~0x10);
-			}
-			return 0;
-#endif
 		default:
 			break;
 	}
-#if 0
-	{
-		ide_hwif_t *hwif	= HWIF(drive);
-		struct pci_dev *dev	= hwif->pci_dev;
-		u8 tmp1 = 0, tmp2 = 0, mode6 = 0;
-
-		pci_read_config_byte(dev, 0x44, &tmp1);
-		pci_read_config_byte(dev, 0x45, &tmp2);
-		printk(" AEC6280 r44=%x r45=%x ",tmp1,tmp2);
-		mode6 = HWIF(drive)->INB(((hwif->channel) ?
-					   hwif->mate->dma_status :
-					   hwif->dma_status));
-		printk(" AEC6280 133=%x ", (mode6 & 0x10));
-	}
-#endif
 	return 0;
 }
 

drivers/ide/pci/alim15x3.c

@@ -876,10 +876,15 @@ static ide_pci_device_t ali15x3_chipset __devinitdata = {
  
 static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	static struct pci_device_id ati_rs100[] = {
+		{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100) },
+		{ },
+	};
+
 	ide_pci_device_t *d = &ali15x3_chipset;
 
-	if(pci_find_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, NULL))
+	if (pci_dev_present(ati_rs100))
-		printk(KERN_ERR "Warning: ATI Radeon IGP Northbridge is not yet fully tested.\n");
+		printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n");
 
 #if defined(CONFIG_SPARC64)
 	d->init_hwif = init_hwif_common_ali15x3;

drivers/ide/pci/cs5520.c

@@ -222,10 +222,9 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
 
 	/* We must not grab the entire device, it has 'ISA' space in its
 	   BARS too and we will freak out other bits of the kernel */
-	if(pci_enable_device_bars(dev, 1<<2))
+	if (pci_enable_device_bars(dev, 1<<2)) {
-	{
 		printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
-		return 1;
+		return -ENODEV;
 	}
 	pci_set_master(dev);
 	if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {

drivers/ide/pci/siimage.c

@@ -6,7 +6,13 @@
  *
  *  May be copied or modified under the terms of the GNU General Public License
  *
- *  Documentation available under NDA only
+ *  Documentation for CMD680:
+ *  http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2
+ *
+ *  Documentation for SiI 3112:
+ *  http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
+ *
+ *  Errata and other documentation only available under NDA.
  *
  *
  *  FAQ Items:

drivers/ide/pci/via82cxxx.c

@@ -100,185 +100,14 @@ static struct via_isa_bridge {
 	{ NULL }
 };
 
-static struct via_isa_bridge *via_config;
-static unsigned int via_80w;
 static unsigned int via_clock;
 static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" };
 
-/*
+struct via82cxxx_dev
- * VIA /proc entry.
- */
-
-#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS)
-
-#include <linux/stat.h>
-#include <linux/proc_fs.h>
-
-static u8 via_proc = 0;
-static unsigned long via_base;
-static struct pci_dev *bmide_dev, *isa_dev;
-
-static char *via_control3[] = { "No limit", "64", "128", "192" };
-
-#define via_print(format, arg...) p += sprintf(p, format "\n" , ## arg)
-#define via_print_drive(name, format, arg...)\
-	p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n");
-
-
-/**
- *	via_get_info		-	generate via /proc file 
- *	@buffer: buffer for data
- *	@addr: set to start of data to use
- *	@offset: current file offset
- *	@count: size of read
- *
- *	Fills in buffer with the debugging/configuration information for
- *	the VIA chipset tuning and attached drives
- */
- 
-static int via_get_info(char *buffer, char **addr, off_t offset, int count)
 {
-	int speed[4], cycle[4], setup[4], active[4], recover[4], den[4],
+	struct via_isa_bridge *via_config;
-		 uen[4], udma[4], umul[4], active8b[4], recover8b[4];
+	unsigned int via_80w;
-	struct pci_dev *dev = bmide_dev;
+};
-	unsigned int v, u, i;
-	int len;
-	u16 c, w;
-	u8 t, x;
-	char *p = buffer;
-
-	via_print("----------VIA BusMastering IDE Configuration"
-		"----------------");
-
-	via_print("Driver Version:                     3.38");
-	via_print("South Bridge:                       VIA %s",
-		via_config->name);
-
-	pci_read_config_byte(isa_dev, PCI_REVISION_ID, &t);
-	pci_read_config_byte(dev, PCI_REVISION_ID, &x);
-	via_print("Revision:                           ISA %#x IDE %#x", t, x);
-	via_print("Highest DMA rate:                   %s",
-		via_dma[via_config->flags & VIA_UDMA]);
-
-	via_print("BM-DMA base:                        %#lx", via_base);
-	via_print("PCI clock:                          %d.%dMHz",
-		via_clock / 1000, via_clock / 100 % 10);
-
-	pci_read_config_byte(dev, VIA_MISC_1, &t);
-	via_print("Master Read  Cycle IRDY:            %dws",
-		(t & 64) >> 6);
-	via_print("Master Write Cycle IRDY:            %dws",
-		(t & 32) >> 5);
-	via_print("BM IDE Status Register Read Retry:  %s",
-		(t & 8) ? "yes" : "no");
-
-	pci_read_config_byte(dev, VIA_MISC_3, &t);
-	via_print("Max DRDY Pulse Width:               %s%s",
-		via_control3[(t & 0x03)], (t & 0x03) ? " PCI clocks" : "");
-
-	via_print("-----------------------Primary IDE"
-		"-------Secondary IDE------");
-	via_print("Read DMA FIFO flush:   %10s%20s",
-		(t & 0x80) ? "yes" : "no", (t & 0x40) ? "yes" : "no");
-	via_print("End Sector FIFO flush: %10s%20s",
-		(t & 0x20) ? "yes" : "no", (t & 0x10) ? "yes" : "no");
-
-	pci_read_config_byte(dev, VIA_IDE_CONFIG, &t);
-	via_print("Prefetch Buffer:       %10s%20s",
-		(t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no");
-	via_print("Post Write Buffer:     %10s%20s",
-		(t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no");
-
-	pci_read_config_byte(dev, VIA_IDE_ENABLE, &t);
-	via_print("Enabled:               %10s%20s",
-		(t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no");
-
-	c = inb(via_base + 0x02) | (inb(via_base + 0x0a) << 8);
-	via_print("Simplex only:          %10s%20s",
-		(c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no");
-
-	via_print("Cable Type:            %10s%20s",
-		(via_80w & 1) ? "80w" : "40w", (via_80w & 2) ? "80w" : "40w");
-
-	via_print("-------------------drive0----drive1"
-		"----drive2----drive3-----");
-
-	pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
-	pci_read_config_dword(dev, VIA_DRIVE_TIMING, &v);
-	pci_read_config_word(dev, VIA_8BIT_TIMING, &w);
-
-	if (via_config->flags & VIA_UDMA)
-		pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-	else u = 0;
-
-	for (i = 0; i < 4; i++) {
-
-		setup[i]     = ((t >> ((3 - i) << 1)) & 0x3) + 1;
-		recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1;
-		active8b[i]  = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1;
-		active[i]    = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1;
-		recover[i]   = ((v >> ((3 - i) << 3)) & 0xf) + 1;
-		udma[i]      = ((u >> ((3 - i) << 3)) & 0x7) + 2;
-		umul[i]      = ((u >> (((3 - i) & 2) << 3)) & 0x8) ? 1 : 2;
-		uen[i]       = ((u >> ((3 - i) << 3)) & 0x20);
-		den[i]       = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2));
-
-		speed[i] = 2 * via_clock / (active[i] + recover[i]);
-		cycle[i] = 1000000 * (active[i] + recover[i]) / via_clock;
-
-		if (!uen[i] || !den[i])
-			continue;
-
-		switch (via_config->flags & VIA_UDMA) {
-
-			case VIA_UDMA_33:
-				speed[i] = 2 * via_clock / udma[i];
-				cycle[i] = 1000000 * udma[i] / via_clock;
-				break;
-
-			case VIA_UDMA_66:
-				speed[i] = 4 * via_clock / (udma[i] * umul[i]);
-				cycle[i] = 500000 * (udma[i] * umul[i]) / via_clock;
-				break;
-
-			case VIA_UDMA_100:
-				speed[i] = 6 * via_clock / udma[i];
-				cycle[i] = 333333 * udma[i] / via_clock;
-				break;
-
-			case VIA_UDMA_133:
-				speed[i] = 8 * via_clock / udma[i];
-				cycle[i] = 250000 * udma[i] / via_clock;
-				break;
-		}
-	}
-
-	via_print_drive("Transfer Mode: ", "%10s",
-		den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO");
-
-	via_print_drive("Address Setup: ", "%8dns",
-		1000000 * setup[i] / via_clock);
-	via_print_drive("Cmd Active:    ", "%8dns",
-		1000000 * active8b[i] / via_clock);
-	via_print_drive("Cmd Recovery:  ", "%8dns",
-		1000000 * recover8b[i] / via_clock);
-	via_print_drive("Data Active:   ", "%8dns",
-		1000000 * active[i] / via_clock);
-	via_print_drive("Data Recovery: ", "%8dns",
-		1000000 * recover[i] / via_clock);
-	via_print_drive("Cycle Time:    ", "%8dns",
-		cycle[i]);
-	via_print_drive("Transfer Rate: ", "%4d.%dMB/s",
-		speed[i] / 1000, speed[i] / 100 % 10);
-
-	/* hoping it is less than 4K... */
-	len = (p - buffer) - offset;
-	*addr = buffer + offset;
-
-	return len > count ? count : len;
-}
-
-#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */
 
 /**
  *	via_set_speed			-	write timing registers
@@ -289,11 +118,13 @@ static int via_get_info(char *buffer, char **addr, off_t offset, int count)
  *	via_set_speed writes timing values to the chipset registers
  */
 
-static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing)
+static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
 {
+	struct pci_dev *dev = hwif->pci_dev;
+	struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif);
 	u8 t;
 
-	if (~via_config->flags & VIA_BAD_AST) {
+	if (~vdev->via_config->flags & VIA_BAD_AST) {
 		pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
 		t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
 		pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
@@ -305,7 +136,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing)
 	pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
 		((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
 
-	switch (via_config->flags & VIA_UDMA) {
+	switch (vdev->via_config->flags & VIA_UDMA) {
 		case VIA_UDMA_33:  t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
 		case VIA_UDMA_66:  t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break;
 		case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
@@ -329,6 +160,7 @@ static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing)
 static int via_set_drive(ide_drive_t *drive, u8 speed)
 {
 	ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
+	struct via82cxxx_dev *vdev = ide_get_hwifdata(drive->hwif);
 	struct ide_timing t, p;
 	unsigned int T, UT;
 
@@ -337,7 +169,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed)
 
 	T = 1000000000 / via_clock;
 
-	switch (via_config->flags & VIA_UDMA) {
+	switch (vdev->via_config->flags & VIA_UDMA) {
 		case VIA_UDMA_33:   UT = T;   break;
 		case VIA_UDMA_66:   UT = T/2; break;
 		case VIA_UDMA_100:  UT = T/3; break;
@@ -352,7 +184,7 @@ static int via_set_drive(ide_drive_t *drive, u8 speed)
 		ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
 	}
 
-	via_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
+	via_set_speed(HWIF(drive), drive->dn, &t);
 
 	if (!drive->init_speed)
 		drive->init_speed = speed;
@@ -390,20 +222,41 @@ static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
  
 static int via82cxxx_ide_dma_check (ide_drive_t *drive)
 {
-	u16 w80 = HWIF(drive)->udma_four;
+	ide_hwif_t *hwif = HWIF(drive);
+	struct via82cxxx_dev *vdev = ide_get_hwifdata(hwif);
+	u16 w80 = hwif->udma_four;
 
 	u16 speed = ide_find_best_mode(drive,
 		XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
-		(via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
+		(vdev->via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
-		(w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
+		(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
-		(w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) |
+		(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) |
-		(w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0));
+		(w80 && (vdev->via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0));
 
 	via_set_drive(drive, speed);
 
 	if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
-		return HWIF(drive)->ide_dma_on(drive);
+		return hwif->ide_dma_on(drive);
-	return HWIF(drive)->ide_dma_off_quietly(drive);
+	return hwif->ide_dma_off_quietly(drive);
+}
+
+static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
+{
+	struct via_isa_bridge *via_config;
+	u8 t;
+
+	for (via_config = via_isa_bridges; via_config->id; via_config++)
+		if ((*isa = pci_find_device(PCI_VENDOR_ID_VIA +
+			!!(via_config->flags & VIA_BAD_ID),
+			via_config->id, NULL))) {
+
+			pci_read_config_byte(*isa, PCI_REVISION_ID, &t);
+			if (t >= via_config->rev_min &&
+			    t <= via_config->rev_max)
+				break;
+		}
+
+	return via_config;
 }
 
 /**
@@ -418,82 +271,28 @@ static int via82cxxx_ide_dma_check (ide_drive_t *drive)
 static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
 {
 	struct pci_dev *isa = NULL;
+	struct via_isa_bridge *via_config;
 	u8 t, v;
 	unsigned int u;
-	int i;
 
 	/*
 	 * Find the ISA bridge to see how good the IDE is.
 	 */
-
+	via_config = via_config_find(&isa);
-	for (via_config = via_isa_bridges; via_config->id; via_config++)
-		if ((isa = pci_find_device(PCI_VENDOR_ID_VIA +
-			!!(via_config->flags & VIA_BAD_ID),
-			via_config->id, NULL))) {
-
-			pci_read_config_byte(isa, PCI_REVISION_ID, &t);
-			if (t >= via_config->rev_min &&
-			    t <= via_config->rev_max)
-				break;
-		}
-
 	if (!via_config->id) {
 		printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
 		return -ENODEV;
 	}
 
 	/*
-	 * Check 80-wire cable presence and setup Clk66.
+	 * Setup or disable Clk66 if appropriate
 	 */
 
-	switch (via_config->flags & VIA_UDMA) {
+	if ((via_config->flags & VIA_UDMA) == VIA_UDMA_66) {
-
+		/* Enable Clk66 */
-		case VIA_UDMA_66:
+		pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-			/* Enable Clk66 */
+		pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
-			pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+	} else if (via_config->flags & VIA_BAD_CLK66) {
-			pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
-			for (i = 24; i >= 0; i -= 8)
-				if (((u >> (i & 16)) & 8) &&
-				    ((u >> i) & 0x20) &&
-				     (((u >> i) & 7) < 2)) {
-					/*
-					 * 2x PCI clock and
-					 * UDMA w/ < 3T/cycle
-					 */
-					via_80w |= (1 << (1 - (i >> 4)));
-				}
-			break;
-
-		case VIA_UDMA_100:
-			pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-			for (i = 24; i >= 0; i -= 8)
-				if (((u >> i) & 0x10) ||
-				    (((u >> i) & 0x20) &&
-				     (((u >> i) & 7) < 4))) {
-					/* BIOS 80-wire bit or
-					 * UDMA w/ < 60ns/cycle
-					 */
-					via_80w |= (1 << (1 - (i >> 4)));
-				}
-			break;
-
-		case VIA_UDMA_133:
-			pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-			for (i = 24; i >= 0; i -= 8)
-				if (((u >> i) & 0x10) ||
-				    (((u >> i) & 0x20) &&
-				     (((u >> i) & 7) < 6))) {
-					/* BIOS 80-wire bit or
-					 * UDMA w/ < 60ns/cycle
-					 */
-					via_80w |= (1 << (1 - (i >> 4)));
-				}
-			break;
-
-	}
-
-	/* Disable Clk66 */
-	if (via_config->flags & VIA_BAD_CLK66) {
 		/* Would cause trouble on 596a and 686 */
 		pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
 		pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
@@ -560,26 +359,78 @@ static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const
 		via_dma[via_config->flags & VIA_UDMA],
 		pci_name(dev));
 
-	/*
-	 * Setup /proc/ide/via entry.
-	 */
-
-#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS)
-	if (!via_proc) {
-		via_base = pci_resource_start(dev, 4);
-		bmide_dev = dev;
-		isa_dev = isa;
-		ide_pci_create_host_proc("via", via_get_info);
-		via_proc = 1;
-	}
-#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */
 	return 0;
 }
 
+/*
+ * Check and handle 80-wire cable presence
+ */
+static void __devinit via_cable_detect(struct pci_dev *dev, struct via82cxxx_dev *vdev)
+{
+	unsigned int u;
+	int i;
+	pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+
+	switch (vdev->via_config->flags & VIA_UDMA) {
+
+		case VIA_UDMA_66:
+			for (i = 24; i >= 0; i -= 8)
+				if (((u >> (i & 16)) & 8) &&
+				    ((u >> i) & 0x20) &&
+				     (((u >> i) & 7) < 2)) {
+					/*
+					 * 2x PCI clock and
+					 * UDMA w/ < 3T/cycle
+					 */
+					vdev->via_80w |= (1 << (1 - (i >> 4)));
+				}
+			break;
+
+		case VIA_UDMA_100:
+			for (i = 24; i >= 0; i -= 8)
+				if (((u >> i) & 0x10) ||
+				    (((u >> i) & 0x20) &&
+				     (((u >> i) & 7) < 4))) {
+					/* BIOS 80-wire bit or
+					 * UDMA w/ < 60ns/cycle
+					 */
+					vdev->via_80w |= (1 << (1 - (i >> 4)));
+				}
+			break;
+
+		case VIA_UDMA_133:
+			for (i = 24; i >= 0; i -= 8)
+				if (((u >> i) & 0x10) ||
+				    (((u >> i) & 0x20) &&
+				     (((u >> i) & 7) < 6))) {
+					/* BIOS 80-wire bit or
+					 * UDMA w/ < 60ns/cycle
+					 */
+					vdev->via_80w |= (1 << (1 - (i >> 4)));
+				}
+			break;
+
+	}
+}
+
 static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
 {
+	struct via82cxxx_dev *vdev = kmalloc(sizeof(struct via82cxxx_dev),
+		GFP_KERNEL);
+	struct pci_dev *isa = NULL;
 	int i;
 
+	if (vdev == NULL) {
+		printk(KERN_ERR "VP_IDE: out of memory :(\n");
+		return;
+	}
+
+	memset(vdev, 0, sizeof(struct via82cxxx_dev));
+	ide_set_hwifdata(hwif, vdev);
+
+	vdev->via_config = via_config_find(&isa);
+	via_cable_detect(hwif->pci_dev, vdev);
+
 	hwif->autodma = 0;
 
 	hwif->tuneproc = &via82cxxx_tune_drive;
@@ -594,7 +445,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
 
 	for (i = 0; i < 2; i++) {
 		hwif->drives[i].io_32bit = 1;
-		hwif->drives[i].unmask = (via_config->flags & VIA_NO_UNMASK) ? 0 : 1;
+		hwif->drives[i].unmask = (vdev->via_config->flags & VIA_NO_UNMASK) ? 0 : 1;
 		hwif->drives[i].autotune = 1;
 		hwif->drives[i].dn = hwif->channel * 2 + i;
 	}
@@ -608,7 +459,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif)
 	hwif->swdma_mask = 0x07;
 
 	if (!hwif->udma_four)
-		hwif->udma_four = (via_80w >> hwif->channel) & 1;
+		hwif->udma_four = (vdev->via_80w >> hwif->channel) & 1;
 	hwif->ide_dma_check = &via82cxxx_ide_dma_check;
 	if (!noautodma)
 		hwif->autodma = 1;

drivers/ide/ppc/pmac.c

@@ -1401,20 +1401,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
 	/* We probe the hwif now */
 	probe_hwif_init(hwif);
 
-	/* The code IDE code will have set hwif->present if we have devices attached,
-	 * if we don't, the discard the interface except if we are on a media bay slot
-	 */
-	if (!hwif->present && !pmif->mediabay) {
-		printk(KERN_INFO "ide%d: Bus empty, interface released.\n",
-			hwif->index);
-		default_hwif_iops(hwif);
-		for (i = IDE_DATA_OFFSET; i <= IDE_CONTROL_OFFSET; ++i)
-			hwif->io_ports[i] = 0;
-		hwif->chipset = ide_unknown;
-		hwif->noprobe = 1;
-		return -ENODEV;
-	}
-
 	return 0;
 }
 

drivers/ide/setup-pci.c

@@ -787,7 +787,7 @@ static int pre_init = 1;		/* Before first ordered IDE scan */
 static LIST_HEAD(ide_pci_drivers);
 
 /*
- *	__ide_register_pci_driver	-	attach IDE driver
+ *	__ide_pci_register_driver	-	attach IDE driver
  *	@driver: pci driver
  *	@module: owner module of the driver
  *

drivers/infiniband/core/user_mad.c

@@ -312,7 +312,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf,
 	int ret, length, hdr_len, copy_offset;
 	int rmpp_active = 0;
 
-	if (count < sizeof (struct ib_user_mad))
+	if (count < sizeof (struct ib_user_mad) + IB_MGMT_RMPP_HDR)
 		return -EINVAL;
 
 	length = count - sizeof (struct ib_user_mad);

drivers/infiniband/hw/mthca/mthca_qp.c

@@ -730,14 +730,15 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
 	}
 
 	if (attr_mask & IB_QP_ACCESS_FLAGS) {
+		qp_context->params2 |=
+			cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_WRITE ?
+				    MTHCA_QP_BIT_RWE : 0);
+
 		/*
-		 * Only enable RDMA/atomics if we have responder
+		 * Only enable RDMA reads and atomics if we have
-		 * resources set to a non-zero value.
+		 * responder resources set to a non-zero value.
 		 */
 		if (qp->resp_depth) {
-			qp_context->params2 |=
-				cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_WRITE ?
-					    MTHCA_QP_BIT_RWE : 0);
 			qp_context->params2 |=
 				cpu_to_be32(attr->qp_access_flags & IB_ACCESS_REMOTE_READ ?
 					    MTHCA_QP_BIT_RRE : 0);
@@ -759,22 +760,19 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
 		if (qp->resp_depth && !attr->max_dest_rd_atomic) {
 			/*
 			 * Lowering our responder resources to zero.
-			 * Turn off RDMA/atomics as responder.
+			 * Turn off reads RDMA and atomics as responder.
-			 * (RWE/RRE/RAE in params2 already zero)
+			 * (RRE/RAE in params2 already zero)
 			 */
-			qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RWE |
+			qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RRE |
-								MTHCA_QP_OPTPAR_RRE |
 								MTHCA_QP_OPTPAR_RAE);
 		}
 
 		if (!qp->resp_depth && attr->max_dest_rd_atomic) {
 			/*
 			 * Increasing our responder resources from
-			 * zero.  Turn on RDMA/atomics as appropriate.
+			 * zero.  Turn on RDMA reads and atomics as
+			 * appropriate.
 			 */
-			qp_context->params2 |=
-				cpu_to_be32(qp->atomic_rd_en & IB_ACCESS_REMOTE_WRITE ?
-					    MTHCA_QP_BIT_RWE : 0);
 			qp_context->params2 |=
 				cpu_to_be32(qp->atomic_rd_en & IB_ACCESS_REMOTE_READ ?
 					    MTHCA_QP_BIT_RRE : 0);
@@ -782,8 +780,7 @@ int mthca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask)
 				cpu_to_be32(qp->atomic_rd_en & IB_ACCESS_REMOTE_ATOMIC ?
 					    MTHCA_QP_BIT_RAE : 0);
 
-			qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RWE |
+			qp_param->opt_param_mask |= cpu_to_be32(MTHCA_QP_OPTPAR_RRE |
-								MTHCA_QP_OPTPAR_RRE |
 								MTHCA_QP_OPTPAR_RAE);
 		}
 
@@ -921,10 +918,12 @@ static void mthca_adjust_qp_caps(struct mthca_dev *dev,
         else
 		qp->max_inline_data = max_data_size - MTHCA_INLINE_HEADER_SIZE;
 
-	qp->sq.max_gs = max_data_size / sizeof (struct mthca_data_seg);
+	qp->sq.max_gs = min_t(int, dev->limits.max_sg,
-	qp->rq.max_gs = (min(dev->limits.max_desc_sz, 1 << qp->rq.wqe_shift) -
+			      max_data_size / sizeof (struct mthca_data_seg));
-			sizeof (struct mthca_next_seg)) /
+	qp->rq.max_gs = min_t(int, dev->limits.max_sg,
-			sizeof (struct mthca_data_seg);
+			       (min(dev->limits.max_desc_sz, 1 << qp->rq.wqe_shift) -
+				sizeof (struct mthca_next_seg)) /
+			       sizeof (struct mthca_data_seg));
 }
 
 /*

drivers/infiniband/ulp/srp/ib_srp.c

@@ -802,13 +802,21 @@ static int srp_post_recv(struct srp_target_port *target)
 
 /*
  * Must be called with target->scsi_host->host_lock held to protect
- * req_lim and tx_head.
+ * req_lim and tx_head.  Lock cannot be dropped between call here and
+ * call to __srp_post_send().
  */
 static struct srp_iu *__srp_get_tx_iu(struct srp_target_port *target)
 {
 	if (target->tx_head - target->tx_tail >= SRP_SQ_SIZE)
 		return NULL;
 
+	if (unlikely(target->req_lim < 1)) {
+		if (printk_ratelimit())
+			printk(KERN_DEBUG PFX "Target has req_lim %d\n",
+			       target->req_lim);
+		return NULL;
+	}
+
 	return target->tx_ring[target->tx_head & SRP_SQ_SIZE];
 }
 
@@ -823,11 +831,6 @@ static int __srp_post_send(struct srp_target_port *target,
 	struct ib_send_wr wr, *bad_wr;
 	int ret = 0;
 
-	if (target->req_lim < 1) {
-		printk(KERN_ERR PFX "Target has req_lim %d\n", target->req_lim);
-		return -EAGAIN;
-	}
-
 	list.addr   = iu->dma;
 	list.length = len;
 	list.lkey   = target->srp_host->mr->lkey;
@@ -1417,6 +1420,8 @@ static ssize_t srp_create_target(struct class_device *class_dev,
 	if (!target_host)
 		return -ENOMEM;
 
+	target_host->max_lun = SRP_MAX_LUN;
+
 	target = host_to_target(target_host);
 	memset(target, 0, sizeof *target);
 

drivers/infiniband/ulp/srp/ib_srp.h

@@ -54,6 +54,7 @@ enum {
 	SRP_PORT_REDIRECT	= 1,
 	SRP_DLID_REDIRECT	= 2,
 
+	SRP_MAX_LUN		= 512,
 	SRP_MAX_IU_LEN		= 256,
 
 	SRP_RQ_SHIFT    	= 6,

drivers/isdn/hisax/Kconfig

@@ -110,7 +110,7 @@ config HISAX_16_3
 
 config HISAX_TELESPCI
 	bool "Teles PCI"
-	depends on PCI && (BROKEN || !(SPARC64 || PPC))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
 	help
 	  This enables HiSax support for the Teles PCI.
 	  See <file:Documentation/isdn/README.HiSax> on how to configure it.
@@ -238,7 +238,7 @@ config HISAX_MIC
 
 config HISAX_NETJET
 	bool "NETjet card"
-	depends on PCI && (BROKEN || !(SPARC64 || PPC))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
 	help
 	  This enables HiSax support for the NetJet from Traverse
 	  Technologies.
@@ -249,7 +249,7 @@ config HISAX_NETJET
 
 config HISAX_NETJET_U
 	bool "NETspider U card"
-	depends on PCI && (BROKEN || !(SPARC64 || PPC))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
 	help
 	  This enables HiSax support for the Netspider U interface ISDN card
 	  from Traverse Technologies.
@@ -317,7 +317,7 @@ config HISAX_GAZEL
 
 config HISAX_HFC_PCI
 	bool "HFC PCI-Bus cards"
-	depends on PCI && (BROKEN || !(SPARC64 || PPC))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
 	help
 	  This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
 
@@ -344,14 +344,14 @@ config HISAX_HFC_SX
 
 config HISAX_ENTERNOW_PCI
 	bool "Formula-n enter:now PCI card"
-	depends on PCI && (BROKEN || !(SPARC64 || PPC))
+	depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K))
 	help
 	  This enables HiSax support for the Formula-n enter:now PCI
 	  ISDN card.
 
 config HISAX_AMD7930
 	bool "Am7930 (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (SPARC32 || SPARC64)
+	depends on EXPERIMENTAL && SPARC
 	help
 	  This enables HiSax support for the AMD7930 chips on some SPARCs.
 	  This code is not finished yet.

drivers/isdn/pcbit/Kconfig

@@ -3,7 +3,7 @@
 #
 config ISDN_DRV_PCBIT
 	tristate "PCBIT-D support"
-	depends on ISDN_I4L && ISA && (BROKEN || !PPC)
+	depends on ISDN_I4L && ISA && (BROKEN || X86)
 	help
 	  This enables support for the PCBIT ISDN-card.  This card is
 	  manufactured in Portugal by Octal.  For running this card,

drivers/parisc/iosapic.c

@@ -700,6 +700,28 @@ static unsigned int iosapic_startup_irq(unsigned int irq)
 	return 0;
 }
 
+#ifdef CONFIG_SMP
+static void iosapic_set_affinity_irq(unsigned int irq, cpumask_t dest)
+{
+	struct vector_info *vi = iosapic_get_vector(irq);
+	u32 d0, d1, dummy_d0;
+	unsigned long flags;
+
+	if (cpu_check_affinity(irq, &dest))
+		return;
+
+	vi->txn_addr = txn_affinity_addr(irq, first_cpu(dest));
+
+	spin_lock_irqsave(&iosapic_lock, flags);
+	/* d1 contains the destination CPU, so only want to set that
+	 * entry */
+	iosapic_rd_irt_entry(vi, &d0, &d1);
+	iosapic_set_irt_data(vi, &dummy_d0, &d1);
+	iosapic_wr_irt_entry(vi, d0, d1);
+	spin_unlock_irqrestore(&iosapic_lock, flags);
+}
+#endif
+
 static struct hw_interrupt_type iosapic_interrupt_type = {
 	.typename =	"IO-SAPIC-level",
 	.startup =	iosapic_startup_irq,
@@ -708,7 +730,9 @@ static struct hw_interrupt_type iosapic_interrupt_type = {
 	.disable =	iosapic_disable_irq,
 	.ack =		no_ack_irq,
 	.end =		iosapic_end_irq,
-//	.set_affinity =	iosapic_set_affinity_irq,
+#ifdef CONFIG_SMP
+	.set_affinity =	iosapic_set_affinity_irq,
+#endif
 };
 
 int iosapic_fixup_irq(void *isi_obj, struct pci_dev *pcidev)

drivers/parisc/superio.c

@@ -24,6 +24,9 @@
  *      Major changes to get basic interrupt infrastructure working to
  *      hopefully be able to support all SuperIO devices. Currently
  *      works with serial. -- John Marvin <jsm@fc.hp.com>
+ *
+ *	Converted superio_init() to be a PCI_FIXUP_FINAL callee.
+ *         -- Kyle McMartin <kyle@parisc-linux.org>
  */
 
 
@@ -141,10 +144,10 @@ superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
 }
 
 /* Initialize Super I/O device */
-
+static void
-static void __devinit
+superio_init(struct pci_dev *pcidev)
-superio_init(struct superio_device *sio)
 {
+	struct superio_device *sio = &sio_dev;
 	struct pci_dev *pdev = sio->lio_pdev;
 	u16 word;
 
@@ -160,8 +163,8 @@ superio_init(struct superio_device *sio)
 	/* ...then properly fixup the USB to point at suckyio PIC */
 	sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev);
 
-	printk (KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
+	printk(KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
-		pci_name(pdev),pdev->irq);
+	       pci_name(pdev), pdev->irq);
 
 	pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
 	sio->sp1_base &= ~1;
@@ -274,7 +277,7 @@ superio_init(struct superio_device *sio)
 
 	sio->suckyio_irq_enabled = 1;
 }
-
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO, superio_init);
 
 static void superio_disable_irq(unsigned int irq)
 {
@@ -452,8 +455,10 @@ static void superio_fixup_pci(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci);
 
 
-static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit
+superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
+	struct superio_device *sio = &sio_dev;
 
 	/*
 	** superio_probe(00:0e.0) ven 0x100b dev 0x2 sv 0x0 sd 0x0 class 0x1018a
@@ -466,7 +471,8 @@ static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_
 		dev->subsystem_vendor, dev->subsystem_device,
 		dev->class);
 
-	superio_init(&sio_dev);
+	if (!sio->suckyio_irq_enabled)
+		BUG(); /* Enabled by PCI_FIXUP_FINAL */
 
 	if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) {	/* Function 1 */
 		superio_parport_init();
@@ -481,19 +487,21 @@ static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_
 		DBG_INIT("superio_probe: WTF? Fire Extinguisher?\n");
 	}
 
-	/* Let appropriate other driver claim this device. */ 
+	/* Let appropriate other driver claim this device. */
 	return -ENODEV;
 }
 
 static struct pci_device_id superio_tbl[] = {
-	{ PCI_VENDOR_ID_NS, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_USB) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415) },
 	{ 0, }
 };
 
 static struct pci_driver superio_driver = {
-	.name =		"SuperIO",
+	.name =         "SuperIO",
-	.id_table =	superio_tbl,
+	.id_table =     superio_tbl,
-	.probe =	superio_probe,
+	.probe =        superio_probe,
 };
 
 static int __init superio_modinit(void)
@@ -506,6 +514,5 @@ static void __exit superio_exit(void)
 	pci_unregister_driver(&superio_driver);
 }
 
-
 module_init(superio_modinit);
 module_exit(superio_exit);

drivers/scsi/ide-scsi.c

@@ -784,8 +784,8 @@ static ide_proc_entry_t idescsi_proc[] = {
 #endif
 
 static ide_driver_t idescsi_driver = {
-	.owner			= THIS_MODULE,
 	.gen_driver = {
+		.owner		= THIS_MODULE,
 		.name		= "ide-scsi",
 		.bus		= &ide_bus_type,
 		.probe		= ide_scsi_probe,

drivers/scsi/sata_mv.c

@@ -2,6 +2,7 @@
  * sata_mv.c - Marvell SATA support
  *
  * Copyright 2005: EMC Corporation, all rights reserved.
+ * Copyright 2005 Red Hat, Inc.  All rights reserved.
  *
  * Please ALWAYS copy linux-ide@vger.kernel.org on emails.
  *
@@ -36,7 +37,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"0.25"
+#define DRV_VERSION	"0.5"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */

drivers/scsi/sata_sil24.c

@@ -5,17 +5,6 @@
  *
  * Based on preview driver from Silicon Image.
  *
- * NOTE: No NCQ/ATAPI support yet.  The preview driver didn't support
- * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make
- * those work.  Enabling those shouldn't be difficult.  Basic
- * structure is all there (in libata-dev tree).  If you have any
- * information about this hardware, please contact me or linux-ide.
- * Info is needed on...
- *
- * - How to issue tagged commands and turn on sactive on issue accordingly.
- * - Where to put an ATAPI command and how to tell the device to send it.
- * - How to enable/use 64bit.
- *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2, or (at your option) any
@@ -42,7 +31,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"sata_sil24"
-#define DRV_VERSION	"0.22"	/* Silicon Image's preview driver was 0.10 */
+#define DRV_VERSION	"0.23"
 
 /*
  * Port request block (PRB) 32 bytes
@@ -221,11 +210,22 @@ enum {
 	IRQ_STAT_4PORTS		= 0xf,
 };
 
-struct sil24_cmd_block {
+struct sil24_ata_block {
 	struct sil24_prb prb;
 	struct sil24_sge sge[LIBATA_MAX_PRD];
 };
 
+struct sil24_atapi_block {
+	struct sil24_prb prb;
+	u8 cdb[16];
+	struct sil24_sge sge[LIBATA_MAX_PRD - 1];
+};
+
+union sil24_cmd_block {
+	struct sil24_ata_block ata;
+	struct sil24_atapi_block atapi;
+};
+
 /*
  * ap->private_data
  *
@@ -233,7 +233,7 @@ struct sil24_cmd_block {
  * here from the previous interrupt.
  */
 struct sil24_port_priv {
-	struct sil24_cmd_block *cmd_block;	/* 32 cmd blocks */
+	union sil24_cmd_block *cmd_block;	/* 32 cmd blocks */
 	dma_addr_t cmd_block_dma;		/* DMA base addr for them */
 	struct ata_taskfile tf;			/* Cached taskfile registers */
 };
@@ -244,6 +244,7 @@ struct sil24_host_priv {
 	void __iomem *port_base;	/* port registers (4 * 8192 bytes @BAR2) */
 };
 
+static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
 static u8 sil24_check_status(struct ata_port *ap);
 static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
 static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
@@ -297,6 +298,8 @@ static struct scsi_host_template sil24_sht = {
 static const struct ata_port_operations sil24_ops = {
 	.port_disable		= ata_port_disable,
 
+	.dev_config		= sil24_dev_config,
+
 	.check_status		= sil24_check_status,
 	.check_altstatus	= sil24_check_status,
 	.dev_select		= ata_noop_dev_select,
@@ -333,7 +336,7 @@ static struct ata_port_info sil24_port_info[] = {
 	{
 		.sht		= &sil24_sht,
 		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+				  ATA_FLAG_SRST | ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -344,7 +347,7 @@ static struct ata_port_info sil24_port_info[] = {
 	{
 		.sht		= &sil24_sht,
 		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+				  ATA_FLAG_SRST | ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -355,7 +358,7 @@ static struct ata_port_info sil24_port_info[] = {
 	{
 		.sht		= &sil24_sht,
 		.host_flags	= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+				  ATA_FLAG_SRST | ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1),
 		.pio_mask	= 0x1f,			/* pio0-4 */
 		.mwdma_mask	= 0x07,			/* mwdma0-2 */
@@ -364,6 +367,16 @@ static struct ata_port_info sil24_port_info[] = {
 	},
 };
 
+static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
+{
+	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+
+	if (ap->cdb_len == 16)
+		writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
+	else
+		writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
+}
+
 static inline void sil24_update_tf(struct ata_port *ap)
 {
 	struct sil24_port_priv *pp = ap->private_data;
@@ -415,22 +428,73 @@ static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 	*tf = pp->tf;
 }
 
+static int sil24_issue_SRST(struct ata_port *ap)
+{
+	void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+	struct sil24_port_priv *pp = ap->private_data;
+	struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
+	dma_addr_t paddr = pp->cmd_block_dma;
+	u32 irq_enable, irq_stat;
+	int cnt;
+
+	/* temporarily turn off IRQs during SRST */
+	irq_enable = readl(port + PORT_IRQ_ENABLE_SET);
+	writel(irq_enable, port + PORT_IRQ_ENABLE_CLR);
+
+	/*
+	 * XXX: Not sure whether the following sleep is needed or not.
+	 * The original driver had it.  So....
+	 */
+	msleep(10);
+
+	prb->ctrl = PRB_CTRL_SRST;
+	prb->fis[1] = 0; /* no PM yet */
+
+	writel((u32)paddr, port + PORT_CMD_ACTIVATE);
+
+	for (cnt = 0; cnt < 100; cnt++) {
+		irq_stat = readl(port + PORT_IRQ_STAT);
+		writel(irq_stat, port + PORT_IRQ_STAT);		/* clear irq */
+
+		irq_stat >>= PORT_IRQ_RAW_SHIFT;
+		if (irq_stat & (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR))
+			break;
+
+		msleep(1);
+	}
+
+	/* restore IRQs */
+	writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
+
+	if (!(irq_stat & PORT_IRQ_COMPLETE))
+		return -1;
+
+	/* update TF */
+	sil24_update_tf(ap);
+	return 0;
+}
+
 static void sil24_phy_reset(struct ata_port *ap)
 {
+	struct sil24_port_priv *pp = ap->private_data;
+
 	__sata_phy_reset(ap);
-	/*
+	if (ap->flags & ATA_FLAG_PORT_DISABLED)
-	 * No ATAPI yet.  Just unconditionally indicate ATA device.
+		return;
-	 * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA
+
-	 * and libata core will ignore the device.
+	if (sil24_issue_SRST(ap) < 0) {
-	 */
+		printk(KERN_ERR DRV_NAME
-	if (!(ap->flags & ATA_FLAG_PORT_DISABLED))
+		       " ata%u: SRST failed, disabling port\n", ap->id);
-		ap->device[0].class = ATA_DEV_ATA;
+		ap->ops->port_disable(ap);
+		return;
+	}
+
+	ap->device->class = ata_dev_classify(&pp->tf);
 }
 
 static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
-				 struct sil24_cmd_block *cb)
+				 struct sil24_sge *sge)
 {
-	struct sil24_sge *sge = cb->sge;
 	struct scatterlist *sg;
 	unsigned int idx = 0;
 
@@ -451,23 +515,47 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc)
 {
 	struct ata_port *ap = qc->ap;
 	struct sil24_port_priv *pp = ap->private_data;
-	struct sil24_cmd_block *cb = pp->cmd_block + qc->tag;
+	union sil24_cmd_block *cb = pp->cmd_block + qc->tag;
-	struct sil24_prb *prb = &cb->prb;
+	struct sil24_prb *prb;
+	struct sil24_sge *sge;
 
 	switch (qc->tf.protocol) {
 	case ATA_PROT_PIO:
 	case ATA_PROT_DMA:
 	case ATA_PROT_NODATA:
+		prb = &cb->ata.prb;
+		sge = cb->ata.sge;
+		prb->ctrl = 0;
 		break;
+
+	case ATA_PROT_ATAPI:
+	case ATA_PROT_ATAPI_DMA:
+	case ATA_PROT_ATAPI_NODATA:
+		prb = &cb->atapi.prb;
+		sge = cb->atapi.sge;
+		memset(cb->atapi.cdb, 0, 32);
+		memcpy(cb->atapi.cdb, qc->cdb, ap->cdb_len);
+
+		if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
+			if (qc->tf.flags & ATA_TFLAG_WRITE)
+				prb->ctrl = PRB_CTRL_PACKET_WRITE;
+			else
+				prb->ctrl = PRB_CTRL_PACKET_READ;
+		} else
+			prb->ctrl = 0;
+
+		break;
+
 	default:
-		/* ATAPI isn't supported yet */
+		prb = NULL;	/* shut up, gcc */
+		sge = NULL;
 		BUG();
 	}
 
 	ata_tf_to_fis(&qc->tf, prb->fis, 0);
 
 	if (qc->flags & ATA_QCFLAG_DMAMAP)
-		sil24_fill_sg(qc, cb);
+		sil24_fill_sg(qc, sge);
 }
 
 static int sil24_qc_issue(struct ata_queued_cmd *qc)
@@ -486,6 +574,31 @@ static void sil24_irq_clear(struct ata_port *ap)
 	/* unused */
 }
 
+static int __sil24_restart_controller(void __iomem *port)
+{
+	u32 tmp;
+	int cnt;
+
+	writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
+
+	/* Max ~10ms */
+	for (cnt = 0; cnt < 10000; cnt++) {
+		tmp = readl(port + PORT_CTRL_STAT);
+		if (tmp & PORT_CS_RDY)
+			return 0;
+		udelay(1);
+	}
+
+	return -1;
+}
+
+static void sil24_restart_controller(struct ata_port *ap)
+{
+	if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr))
+		printk(KERN_ERR DRV_NAME
+		       " ata%u: failed to restart controller\n", ap->id);
+}
+
 static int __sil24_reset_controller(void __iomem *port)
 {
 	int cnt;
@@ -505,7 +618,11 @@ static int __sil24_reset_controller(void __iomem *port)
 
 	if (tmp & PORT_CS_DEV_RST)
 		return -1;
-	return 0;
+
+	if (tmp & PORT_CS_RDY)
+		return 0;
+
+	return __sil24_restart_controller(port);
 }
 
 static void sil24_reset_controller(struct ata_port *ap)
@@ -567,9 +684,15 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
 	if (serror)
 		writel(serror, port + PORT_SERROR);
 
-	printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
+	/*
-	       "  stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+	 * Don't log ATAPI device errors.  They're supposed to happen
-	       ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
+	 * and any serious errors will be logged using sense data by
+	 * the SCSI layer.
+	 */
+	if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
+		printk("ata%u: error interrupt on port%d\n"
+		       "  stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+		       ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
 
 	if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
 		/*
@@ -577,6 +700,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
 		 */
 		sil24_update_tf(ap);
 		err_mask = ac_err_mask(pp->tf.command);
+		sil24_restart_controller(ap);
 	} else {
 		/*
 		 * Other errors.  libata currently doesn't have any
@@ -584,12 +708,11 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
 		 * ATA_ERR.
 		 */
 		err_mask = AC_ERR_OTHER;
+		sil24_reset_controller(ap);
 	}
 
 	if (qc)
 		ata_qc_complete(qc, err_mask);
-
-	sil24_reset_controller(ap);
 }
 
 static inline void sil24_host_intr(struct ata_port *ap)
@@ -665,7 +788,7 @@ static int sil24_port_start(struct ata_port *ap)
 {
 	struct device *dev = ap->host_set->dev;
 	struct sil24_port_priv *pp;
-	struct sil24_cmd_block *cb;
+	union sil24_cmd_block *cb;
 	size_t cb_size = sizeof(*cb);
 	dma_addr_t cb_dma;
 	int rc = -ENOMEM;

drivers/serial/Kconfig

@@ -507,7 +507,7 @@ config SERIAL_SUNSU_CONSOLE
 
 config SERIAL_MUX
 	tristate "Serial MUX support"
-	depends on PARISC
+	depends on GSC
 	select SERIAL_CORE
 	default y
 	---help---

drivers/serial/mux.c

@@ -65,8 +65,8 @@ static struct uart_driver mux_driver = {
 
 static struct timer_list mux_timer;
 
-#define UART_PUT_CHAR(p, c) __raw_writel((c), (unsigned long)(p)->membase + IO_DATA_REG_OFFSET)
+#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET)
-#define UART_GET_FIFO_CNT(p) __raw_readl((unsigned long)(p)->membase + IO_DCOUNT_REG_OFFSET)
+#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET)
 #define GET_MUX_PORTS(iodc_data) ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8
 
 /**
@@ -79,10 +79,7 @@ static struct timer_list mux_timer;
  */
 static unsigned int mux_tx_empty(struct uart_port *port)
 {
-	unsigned int cnt = __raw_readl((unsigned long)port->membase 
+	return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT;
-				+ IO_DCOUNT_REG_OFFSET);
-
-	return cnt ? 0 : TIOCSER_TEMT;
 } 
 
 /**
@@ -218,8 +215,7 @@ static void mux_read(struct uart_port *port)
 	__u32 start_count = port->icount.rx;
 
 	while(1) {
-		data = __raw_readl((unsigned long)port->membase
+		data = __raw_readl(port->membase + IO_DATA_REG_OFFSET);
-						+ IO_DATA_REG_OFFSET);
 
 		if (MUX_STATUS(data))
 			continue;
@@ -481,6 +477,13 @@ static int __init mux_probe(struct parisc_device *dev)
 		port->ops	= &mux_pops;
 		port->flags	= UPF_BOOT_AUTOCONF;
 		port->line	= port_cnt;
+
+		/* The port->timeout needs to match what is present in
+		 * uart_wait_until_sent in serial_core.c.  Otherwise
+		 * the time spent in msleep_interruptable will be very
+		 * long, causing the appearance of a console hang.
+		 */
+		port->timeout   = HZ / 50;
 		spin_lock_init(&port->lock);
 		status = uart_add_one_port(&mux_driver, port);
 		BUG_ON(status);

fs/compat_ioctl.c

@@ -137,7 +137,7 @@
 #define EXT2_IOC32_GETFLAGS               _IOR('f', 1, int)
 #define EXT2_IOC32_SETFLAGS               _IOW('f', 2, int)
 #define EXT3_IOC32_GETVERSION             _IOR('f', 3, int)
-#define EXT3_IOC32_SETVERSION             _IOR('f', 4, int)
+#define EXT3_IOC32_SETVERSION             _IOW('f', 4, int)
 #define EXT3_IOC32_GETRSVSZ               _IOR('f', 5, int)
 #define EXT3_IOC32_SETRSVSZ               _IOW('f', 6, int)
 #define EXT3_IOC32_GROUP_EXTEND           _IOW('f', 7, unsigned int)

include/asm-parisc/irq.h

@@ -8,6 +8,7 @@
 #define _ASM_PARISC_IRQ_H
 
 #include <linux/config.h>
+#include <linux/cpumask.h>
 #include <asm/types.h>
 
 #define NO_IRQ		(-1)
@@ -49,10 +50,10 @@ extern int txn_alloc_irq(unsigned int nbits);
 extern int txn_claim_irq(int);
 extern unsigned int txn_alloc_data(unsigned int);
 extern unsigned long txn_alloc_addr(unsigned int);
+extern unsigned long txn_affinity_addr(unsigned int irq, int cpu);
 
 extern int cpu_claim_irq(unsigned int irq, struct hw_interrupt_type *, void *);
-
+extern int cpu_check_affinity(unsigned int irq, cpumask_t *dest);
-extern int cpu_claim_irq(unsigned int irq, struct hw_interrupt_type *, void *);
 
 /* soft power switch support (power.c) */
 extern struct tasklet_struct power_tasklet;

include/asm-parisc/smp.h

@@ -29,6 +29,7 @@ extern cpumask_t cpu_online_map;
 #define cpu_logical_map(cpu)	(cpu)
 
 extern void smp_send_reschedule(int cpu);
+extern void smp_send_all_nop(void);
 
 #endif /* !ASSEMBLY */
 
@@ -53,7 +54,11 @@ extern unsigned long cpu_present_mask;
 
 #define raw_smp_processor_id()	(current_thread_info()->cpu)
 
-#endif /* CONFIG_SMP */
+#else /* CONFIG_SMP */
+
+static inline void smp_send_all_nop(void) { return; }
+
+#endif
 
 #define NO_PROC_ID		0xFF		/* No processor magic marker */
 #define ANY_PROC_ID		0xFF		/* Any processor magic marker */

include/asm-parisc/spinlock.h

@@ -11,18 +11,25 @@ static inline int __raw_spin_is_locked(raw_spinlock_t *x)
 	return *a == 0;
 }
 
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0)
 #define __raw_spin_unlock_wait(x) \
 		do { cpu_relax(); } while (__raw_spin_is_locked(x))
 
-static inline void __raw_spin_lock(raw_spinlock_t *x)
+static inline void __raw_spin_lock_flags(raw_spinlock_t *x,
+					 unsigned long flags)
 {
 	volatile unsigned int *a;
 
 	mb();
 	a = __ldcw_align(x);
 	while (__ldcw(a) == 0)
-		while (*a == 0);
+		while (*a == 0)
+			if (flags & PSW_SM_I) {
+				local_irq_enable();
+				cpu_relax();
+				local_irq_disable();
+			} else
+				cpu_relax();
 	mb();
 }
 
@@ -60,26 +67,20 @@ static inline int __raw_spin_trylock(raw_spinlock_t *x)
 
 static  __inline__ void __raw_read_lock(raw_rwlock_t *rw)
 {
-	unsigned long flags;
-	local_irq_save(flags);
 	__raw_spin_lock(&rw->lock);
 
 	rw->counter++;
 
 	__raw_spin_unlock(&rw->lock);
-	local_irq_restore(flags);
 }
 
 static  __inline__ void __raw_read_unlock(raw_rwlock_t *rw)
 {
-	unsigned long flags;
-	local_irq_save(flags);
 	__raw_spin_lock(&rw->lock);
 
 	rw->counter--;
 
 	__raw_spin_unlock(&rw->lock);
-	local_irq_restore(flags);
 }
 
 /* write_lock is less trivial.  We optimistically grab the lock and check

include/asm-parisc/tlbflush.h

@@ -12,21 +12,15 @@
  * N class systems, only one PxTLB inter processor broadcast can be
  * active at any one time on the Merced bus.  This tlb purge
  * synchronisation is fairly lightweight and harmless so we activate
- * it on all SMP systems not just the N class. */
+ * it on all SMP systems not just the N class.  We also need to have
-#ifdef CONFIG_SMP
+ * preemption disabled on uniprocessor machines, and spin_lock does that
+ * nicely.
+ */
 extern spinlock_t pa_tlb_lock;
 
 #define purge_tlb_start(x) spin_lock(&pa_tlb_lock)
 #define purge_tlb_end(x) spin_unlock(&pa_tlb_lock)
 
-#else
-
-#define purge_tlb_start(x) do { } while(0)
-#define purge_tlb_end(x) do { } while (0)
-
-#endif
-
-
 extern void flush_tlb_all(void);
 
 /*
@@ -88,7 +82,6 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 	if (npages >= 512)  /* 2MB of space: arbitrary, should be tuned */
 		flush_tlb_all();
 	else {
-		preempt_disable();
 		mtsp(vma->vm_mm->context,1);
 		purge_tlb_start();
 		if (split_tlb) {
@@ -102,7 +95,6 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 				pdtlb(start);
 				start += PAGE_SIZE;
 			}
-		preempt_enable();
 		}
 		purge_tlb_end();
 	}

include/linux/cciss_ioctl.h

@@ -10,8 +10,8 @@
 typedef struct _cciss_pci_info_struct
 {
 	unsigned char 	bus;
-	unsigned short	domain;
 	unsigned char 	dev_fn;
+	unsigned short	domain;
 	__u32 		board_id;
 } cciss_pci_info_struct; 
 

include/linux/ide.h

@@ -1089,9 +1089,11 @@ enum {
 
 /*
  * Subdrivers support.
+ *
+ * The gendriver.owner field should be set to the module owner of this driver.
+ * The gendriver.name field should be set to the name of this driver
  */
 typedef struct ide_driver_s {
-	struct module			*owner;
 	const char			*version;
 	u8				media;
 	unsigned supports_dsc_overlap	: 1;

include/linux/mm.h

@@ -940,7 +940,9 @@ unsigned long max_sane_readahead(unsigned long nr);
 
 /* Do stack extension */
 extern int expand_stack(struct vm_area_struct *vma, unsigned long address);
+#ifdef CONFIG_IA64
 extern int expand_upwards(struct vm_area_struct *vma, unsigned long address);
+#endif
 
 /* Look up the first VMA which satisfies  addr < vm_end,  NULL if none. */
 extern struct vm_area_struct * find_vma(struct mm_struct * mm, unsigned long addr);

mm/mmap.c

@@ -1501,7 +1501,7 @@ static int acct_stack_growth(struct vm_area_struct * vma, unsigned long size, un
  * PA-RISC uses this for its stack; IA64 for its Register Backing Store.
  * vma is the last one with address > vma->vm_end.  Have to extend vma.
  */
-#ifdef CONFIG_STACK_GROWSUP
+#ifndef CONFIG_IA64
 static inline
 #endif
 int expand_upwards(struct vm_area_struct *vma, unsigned long address)