forked from luck/tmp_suning_uos_patched
ASoC: samsung: i2s: Ensure the RCLK rate is properly determined
If the RCLK mux clock configuration is specified in DT and no set_sysclk() callback is used in the sound card driver the sclk_srcrate field will remain set to 0, leading to an incorrect PSR divider setting. To fix this the frequency value is retrieved from the CLK_I2S_RCLK_SRC clock, so the actual RCLK mux selection is taken into account. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
4b20f44e41
commit
647d04f8e0
|
@ -656,8 +656,12 @@ static int i2s_set_fmt(struct snd_soc_dai *dai,
|
|||
tmp |= mod_slave;
|
||||
break;
|
||||
case SND_SOC_DAIFMT_CBS_CFS:
|
||||
/* Set default source clock in Master mode */
|
||||
if (i2s->rclk_srcrate == 0)
|
||||
/*
|
||||
* Set default source clock in Master mode, only when the
|
||||
* CLK_I2S_RCLK_SRC clock is not exposed so we ensure any
|
||||
* clock configuration assigned in DT is not overwritten.
|
||||
*/
|
||||
if (i2s->rclk_srcrate == 0 && i2s->clk_data.clks == NULL)
|
||||
i2s_set_sysclk(dai, SAMSUNG_I2S_RCLKSRC_0,
|
||||
0, SND_SOC_CLOCK_IN);
|
||||
break;
|
||||
|
@ -881,6 +885,11 @@ static int config_setup(struct i2s_dai *i2s)
|
|||
return 0;
|
||||
|
||||
if (!(i2s->quirks & QUIRK_NO_MUXPSR)) {
|
||||
struct clk *rclksrc = i2s->clk_table[CLK_I2S_RCLK_SRC];
|
||||
|
||||
if (i2s->rclk_srcrate == 0 && rclksrc && !IS_ERR(rclksrc))
|
||||
i2s->rclk_srcrate = clk_get_rate(rclksrc);
|
||||
|
||||
psr = i2s->rclk_srcrate / i2s->frmclk / rfs;
|
||||
writel(((psr - 1) << 8) | PSR_PSREN, i2s->addr + I2SPSR);
|
||||
dev_dbg(&i2s->pdev->dev,
|
||||
|
|
Loading…
Reference in New Issue
Block a user