forked from luck/tmp_suning_uos_patched
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie: "Fixes for i915, amdgpu/radeon and imx. The IMX fix is for an autoloading regression found in Fedora. The radeon fixes, are the same fix to amdgpu/radeon to avoid a hardware lockup in some circumstances with a bad mode, and a double free bug I took a few hours chasing down the other morning. The i915 fixes are across the board, all stable material, and fixing some hangs and suspend/resume issues, along with a live status regressions" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading drm/amdgpu: make sure vertical front porch is at least 1 drm/radeon: make sure vertical front porch is at least 1 drm/amdgpu: set metadata pointer to NULL after freeing. drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW drm/i915: Fake HDMI live status drm/i915: Fix eDP low vswing for Broadwell drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume drm/i915: Fix system resume if PCI device remained enabled drm/i915: Avoid stalling on pending flips for legacy cursor updates
This commit is contained in:
commit
659a182327
|
@ -541,6 +541,7 @@ int amdgpu_bo_set_metadata (struct amdgpu_bo *bo, void *metadata,
|
|||
if (!metadata_size) {
|
||||
if (bo->metadata_size) {
|
||||
kfree(bo->metadata);
|
||||
bo->metadata = NULL;
|
||||
bo->metadata_size = 0;
|
||||
}
|
||||
return 0;
|
||||
|
|
|
@ -298,6 +298,10 @@ bool amdgpu_atombios_encoder_mode_fixup(struct drm_encoder *encoder,
|
|||
&& (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
|
||||
adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
|
||||
|
||||
/* vertical FP must be at least 1 */
|
||||
if (mode->crtc_vsync_start == mode->crtc_vdisplay)
|
||||
adjusted_mode->crtc_vsync_start++;
|
||||
|
||||
/* get the native mode for scaling */
|
||||
if (amdgpu_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT))
|
||||
amdgpu_panel_mode_fixup(encoder, adjusted_mode);
|
||||
|
|
|
@ -792,7 +792,7 @@ static int i915_drm_resume(struct drm_device *dev)
|
|||
static int i915_drm_resume_early(struct drm_device *dev)
|
||||
{
|
||||
struct drm_i915_private *dev_priv = dev->dev_private;
|
||||
int ret = 0;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* We have a resume ordering issue with the snd-hda driver also
|
||||
|
@ -803,6 +803,36 @@ static int i915_drm_resume_early(struct drm_device *dev)
|
|||
* FIXME: This should be solved with a special hdmi sink device or
|
||||
* similar so that power domains can be employed.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Note that we need to set the power state explicitly, since we
|
||||
* powered off the device during freeze and the PCI core won't power
|
||||
* it back up for us during thaw. Powering off the device during
|
||||
* freeze is not a hard requirement though, and during the
|
||||
* suspend/resume phases the PCI core makes sure we get here with the
|
||||
* device powered on. So in case we change our freeze logic and keep
|
||||
* the device powered we can also remove the following set power state
|
||||
* call.
|
||||
*/
|
||||
ret = pci_set_power_state(dev->pdev, PCI_D0);
|
||||
if (ret) {
|
||||
DRM_ERROR("failed to set PCI D0 power state (%d)\n", ret);
|
||||
goto out;
|
||||
}
|
||||
|
||||
/*
|
||||
* Note that pci_enable_device() first enables any parent bridge
|
||||
* device and only then sets the power state for this device. The
|
||||
* bridge enabling is a nop though, since bridge devices are resumed
|
||||
* first. The order of enabling power and enabling the device is
|
||||
* imposed by the PCI core as described above, so here we preserve the
|
||||
* same order for the freeze/thaw phases.
|
||||
*
|
||||
* TODO: eventually we should remove pci_disable_device() /
|
||||
* pci_enable_enable_device() from suspend/resume. Due to how they
|
||||
* depend on the device enable refcount we can't anyway depend on them
|
||||
* disabling/enabling the device.
|
||||
*/
|
||||
if (pci_enable_device(dev->pdev)) {
|
||||
ret = -EIO;
|
||||
goto out;
|
||||
|
|
|
@ -2907,7 +2907,14 @@ enum skl_disp_power_wells {
|
|||
#define GEN6_RP_STATE_CAP _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5998)
|
||||
#define BXT_RP_STATE_CAP _MMIO(0x138170)
|
||||
|
||||
#define INTERVAL_1_28_US(us) (((us) * 100) >> 7)
|
||||
/*
|
||||
* Make these a multiple of magic 25 to avoid SNB (eg. Dell XPS
|
||||
* 8300) freezing up around GPU hangs. Looks as if even
|
||||
* scheduling/timer interrupts start misbehaving if the RPS
|
||||
* EI/thresholds are "bad", leading to a very sluggish or even
|
||||
* frozen machine.
|
||||
*/
|
||||
#define INTERVAL_1_28_US(us) roundup(((us) * 100) >> 7, 25)
|
||||
#define INTERVAL_1_33_US(us) (((us) * 3) >> 2)
|
||||
#define INTERVAL_0_833_US(us) (((us) * 6) / 5)
|
||||
#define GT_INTERVAL_FROM_US(dev_priv, us) (IS_GEN9(dev_priv) ? \
|
||||
|
|
|
@ -443,9 +443,17 @@ void intel_prepare_ddi_buffer(struct intel_encoder *encoder)
|
|||
} else if (IS_BROADWELL(dev_priv)) {
|
||||
ddi_translations_fdi = bdw_ddi_translations_fdi;
|
||||
ddi_translations_dp = bdw_ddi_translations_dp;
|
||||
ddi_translations_edp = bdw_ddi_translations_edp;
|
||||
|
||||
if (dev_priv->edp_low_vswing) {
|
||||
ddi_translations_edp = bdw_ddi_translations_edp;
|
||||
n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
|
||||
} else {
|
||||
ddi_translations_edp = bdw_ddi_translations_dp;
|
||||
n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
|
||||
}
|
||||
|
||||
ddi_translations_hdmi = bdw_ddi_translations_hdmi;
|
||||
n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
|
||||
|
||||
n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
|
||||
n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
|
||||
hdmi_default_entry = 7;
|
||||
|
@ -3201,12 +3209,6 @@ void intel_ddi_get_config(struct intel_encoder *encoder,
|
|||
intel_ddi_clock_get(encoder, pipe_config);
|
||||
}
|
||||
|
||||
static void intel_ddi_destroy(struct drm_encoder *encoder)
|
||||
{
|
||||
/* HDMI has nothing special to destroy, so we can go with this. */
|
||||
intel_dp_encoder_destroy(encoder);
|
||||
}
|
||||
|
||||
static bool intel_ddi_compute_config(struct intel_encoder *encoder,
|
||||
struct intel_crtc_state *pipe_config)
|
||||
{
|
||||
|
@ -3225,7 +3227,8 @@ static bool intel_ddi_compute_config(struct intel_encoder *encoder,
|
|||
}
|
||||
|
||||
static const struct drm_encoder_funcs intel_ddi_funcs = {
|
||||
.destroy = intel_ddi_destroy,
|
||||
.reset = intel_dp_encoder_reset,
|
||||
.destroy = intel_dp_encoder_destroy,
|
||||
};
|
||||
|
||||
static struct intel_connector *
|
||||
|
@ -3324,6 +3327,7 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
|
|||
intel_encoder->post_disable = intel_ddi_post_disable;
|
||||
intel_encoder->get_hw_state = intel_ddi_get_hw_state;
|
||||
intel_encoder->get_config = intel_ddi_get_config;
|
||||
intel_encoder->suspend = intel_dp_encoder_suspend;
|
||||
|
||||
intel_dig_port->port = port;
|
||||
intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
|
||||
|
|
|
@ -13351,6 +13351,9 @@ static int intel_atomic_prepare_commit(struct drm_device *dev,
|
|||
}
|
||||
|
||||
for_each_crtc_in_state(state, crtc, crtc_state, i) {
|
||||
if (state->legacy_cursor_update)
|
||||
continue;
|
||||
|
||||
ret = intel_crtc_wait_for_pending_flips(crtc);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
|
|
@ -4898,7 +4898,7 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder)
|
|||
kfree(intel_dig_port);
|
||||
}
|
||||
|
||||
static void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
|
||||
void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
|
||||
{
|
||||
struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
|
||||
|
||||
|
@ -4940,7 +4940,7 @@ static void intel_edp_panel_vdd_sanitize(struct intel_dp *intel_dp)
|
|||
edp_panel_vdd_schedule_off(intel_dp);
|
||||
}
|
||||
|
||||
static void intel_dp_encoder_reset(struct drm_encoder *encoder)
|
||||
void intel_dp_encoder_reset(struct drm_encoder *encoder)
|
||||
{
|
||||
struct intel_dp *intel_dp;
|
||||
|
||||
|
|
|
@ -1238,6 +1238,8 @@ void intel_dp_set_link_params(struct intel_dp *intel_dp,
|
|||
void intel_dp_start_link_train(struct intel_dp *intel_dp);
|
||||
void intel_dp_stop_link_train(struct intel_dp *intel_dp);
|
||||
void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
|
||||
void intel_dp_encoder_reset(struct drm_encoder *encoder);
|
||||
void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder);
|
||||
void intel_dp_encoder_destroy(struct drm_encoder *encoder);
|
||||
int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc);
|
||||
bool intel_dp_compute_config(struct intel_encoder *encoder,
|
||||
|
|
|
@ -1415,8 +1415,16 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
|
|||
hdmi_to_dig_port(intel_hdmi));
|
||||
}
|
||||
|
||||
if (!live_status)
|
||||
DRM_DEBUG_KMS("Live status not up!");
|
||||
if (!live_status) {
|
||||
DRM_DEBUG_KMS("HDMI live status down\n");
|
||||
/*
|
||||
* Live status register is not reliable on all intel platforms.
|
||||
* So consider live_status only for certain platforms, for
|
||||
* others, read EDID to determine presence of sink.
|
||||
*/
|
||||
if (INTEL_INFO(dev_priv)->gen < 7 || IS_IVYBRIDGE(dev_priv))
|
||||
live_status = true;
|
||||
}
|
||||
|
||||
intel_hdmi_unset_edid(connector);
|
||||
|
||||
|
|
|
@ -310,6 +310,10 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
|
|||
&& (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
|
||||
adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
|
||||
|
||||
/* vertical FP must be at least 1 */
|
||||
if (mode->crtc_vsync_start == mode->crtc_vdisplay)
|
||||
adjusted_mode->crtc_vsync_start++;
|
||||
|
||||
/* get the native mode for scaling */
|
||||
if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) {
|
||||
radeon_panel_mode_fixup(encoder, adjusted_mode);
|
||||
|
|
|
@ -1068,7 +1068,6 @@ static int ipu_add_client_devices(struct ipu_soc *ipu, unsigned long ipu_base)
|
|||
goto err_register;
|
||||
}
|
||||
|
||||
pdev->dev.of_node = of_node;
|
||||
pdev->dev.parent = dev;
|
||||
|
||||
ret = platform_device_add_data(pdev, ®->pdata,
|
||||
|
@ -1079,6 +1078,12 @@ static int ipu_add_client_devices(struct ipu_soc *ipu, unsigned long ipu_base)
|
|||
platform_device_put(pdev);
|
||||
goto err_register;
|
||||
}
|
||||
|
||||
/*
|
||||
* Set of_node only after calling platform_device_add. Otherwise
|
||||
* the platform:imx-ipuv3-crtc modalias won't be used.
|
||||
*/
|
||||
pdev->dev.of_node = of_node;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
|
Loading…
Reference in New Issue
Block a user