forked from luck/tmp_suning_uos_patched
dt-bindings: doc: reflect new NVMEM of_get_mac_address behaviour
As of_get_mac_address now supports NVMEM under the hood, we need to update the bindings documentation with the new nvmem-cell* properties, which would mean copy&pasting a lot of redundant information to every binding documentation currently referencing some of the MAC address properties. So I've just removed all the references to the optional MAC address properties and replaced them with the small note referencing net/ethernet.txt file. Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
d01f449c00
commit
687e3d5550
|
@ -46,9 +46,8 @@ Required properties:
|
|||
- reg: phy id used to communicate to phy.
|
||||
- device_type: Must be "ethernet-phy".
|
||||
|
||||
Optional properties:
|
||||
- local-mac-address: See ethernet.txt in the same directory.
|
||||
- max-frame-size: See ethernet.txt in the same directory.
|
||||
The MAC address will be determined using the optional properties defined in
|
||||
ethernet.txt.
|
||||
|
||||
Example:
|
||||
|
||||
|
|
|
@ -24,8 +24,6 @@ Required properties:
|
|||
- phy-mode: See ethernet.txt file in the same directory
|
||||
|
||||
Optional properties:
|
||||
- mac-address: mac address to be assigned to the device. Can be overridden
|
||||
by UEFI.
|
||||
- dma-coherent: Present if dma operations are coherent
|
||||
- amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate
|
||||
a unique interrupt for each DMA channel - this requires an additional
|
||||
|
@ -34,6 +32,9 @@ Optional properties:
|
|||
0 - 1GbE and 10GbE (default)
|
||||
1 - 2.5GbE and 10GbE
|
||||
|
||||
The MAC address will be determined using the optional properties defined in
|
||||
ethernet.txt.
|
||||
|
||||
The following optional properties are represented by an array with each
|
||||
value corresponding to a particular speed. The first array value represents
|
||||
the setting for the 1GbE speed, the second value for the 2.5GbE speed and
|
||||
|
|
|
@ -16,8 +16,8 @@ Required properties:
|
|||
registers (required for Northstar2)
|
||||
- interrupts: Interrupt number
|
||||
|
||||
Optional properties:
|
||||
- mac-address: See ethernet.txt file in the same directory
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Examples:
|
||||
|
||||
|
|
|
@ -49,10 +49,12 @@ Required properties:
|
|||
|
||||
Optional properties:
|
||||
- dual_emac_res_vlan : Specifies VID to be used to segregate the ports
|
||||
- mac-address : See ethernet.txt file in the same directory
|
||||
- phy_id : Specifies slave phy id (deprecated, use phy-handle)
|
||||
- phy-handle : See ethernet.txt file in the same directory
|
||||
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Slave sub-nodes:
|
||||
- fixed-link : See fixed-link.txt file in the same directory
|
||||
|
||||
|
|
|
@ -20,11 +20,12 @@ Required properties:
|
|||
Optional properties:
|
||||
- phy-handle: See ethernet.txt file in the same directory.
|
||||
If absent, davinci_emac driver defaults to 100/FULL.
|
||||
- nvmem-cells: phandle, reference to an nvmem node for the MAC address
|
||||
- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
|
||||
- ti,davinci-rmii-en: 1 byte, 1 means use RMII
|
||||
- ti,davinci-no-bd-ram: boolean, does EMAC have BD RAM?
|
||||
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Example (enbw_cmc board):
|
||||
eth0: emac@1e20000 {
|
||||
compatible = "ti,davinci-dm6467-emac";
|
||||
|
|
|
@ -65,9 +65,8 @@ properties, described in binding documents:
|
|||
Documentation/devicetree/bindings/net/fixed-link.txt
|
||||
for details.
|
||||
|
||||
- local-mac-address : See
|
||||
Documentation/devicetree/bindings/net/ethernet.txt
|
||||
for details.
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Example
|
||||
|
||||
|
|
|
@ -4,12 +4,14 @@ NOTE: All 'phy*' properties documented below are Ethernet specific. For the
|
|||
generic PHY 'phys' property, see
|
||||
Documentation/devicetree/bindings/phy/phy-bindings.txt.
|
||||
|
||||
- local-mac-address: array of 6 bytes, specifies the MAC address that was
|
||||
assigned to the network device;
|
||||
- mac-address: array of 6 bytes, specifies the MAC address that was last used by
|
||||
the boot program; should be used in cases where the MAC address assigned to
|
||||
the device by the boot program is different from the "local-mac-address"
|
||||
property;
|
||||
- local-mac-address: array of 6 bytes, specifies the MAC address that was
|
||||
assigned to the network device;
|
||||
- nvmem-cells: phandle, reference to an nvmem node for the MAC address
|
||||
- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
|
||||
- max-speed: number, specifies maximum speed in Mbit/s supported by the device;
|
||||
- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
|
||||
the maximum frame size (there's contradiction in the Devicetree
|
||||
|
|
|
@ -14,7 +14,6 @@ Required properties:
|
|||
the PHY reset signal(optional).
|
||||
- reset-names: should contain the reset signal name "mac"(required)
|
||||
and "phy"(optional).
|
||||
- mac-address: see ethernet.txt [1].
|
||||
- phy-mode: see ethernet.txt [1].
|
||||
- phy-handle: see ethernet.txt [1].
|
||||
- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given.
|
||||
|
@ -22,6 +21,9 @@ Required properties:
|
|||
The 2nd cell is reset pulse in micro seconds.
|
||||
The 3rd cell is reset post-delay in micro seconds.
|
||||
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt[1].
|
||||
|
||||
[1] Documentation/devicetree/bindings/net/ethernet.txt
|
||||
|
||||
Example:
|
||||
|
|
|
@ -18,7 +18,6 @@ Required properties:
|
|||
- #size-cells: must be <0>.
|
||||
- phy-mode: see ethernet.txt [1].
|
||||
- phy-handle: see ethernet.txt [1].
|
||||
- mac-address: see ethernet.txt [1].
|
||||
- clocks: clock phandle and specifier pair.
|
||||
- clock-names: contain the clock name "mac_core"(required) and "mac_ifc"(optional).
|
||||
- resets: should contain the phandle to the MAC core reset signal(optional),
|
||||
|
@ -31,6 +30,9 @@ Required properties:
|
|||
The 2nd cell is reset pulse in micro seconds.
|
||||
The 3rd cell is reset post-delay in micro seconds.
|
||||
|
||||
The MAC address will be determined using the properties defined in
|
||||
ethernet.txt[1].
|
||||
|
||||
- PHY subnode: inherits from phy binding [2]
|
||||
|
||||
[1] Documentation/devicetree/bindings/net/ethernet.txt
|
||||
|
|
|
@ -135,14 +135,14 @@ Optional properties:
|
|||
are swapped. The netcp driver will swap the two DWORDs
|
||||
back to the proper order when this property is set to 2
|
||||
when it obtains the mac address from efuse.
|
||||
- local-mac-address: the driver is designed to use the of_get_mac_address api
|
||||
only if efuse-mac is 0. When efuse-mac is 0, the MAC
|
||||
address is obtained from local-mac-address. If this
|
||||
attribute is not present, then the driver will use a
|
||||
random MAC address.
|
||||
- "netcp-device label": phandle to the device specification for each of NetCP
|
||||
sub-module attached to this interface.
|
||||
|
||||
The MAC address will be determined using the optional properties defined in
|
||||
ethernet.txt, as provided by the of_get_mac_address API and only if efuse-mac
|
||||
is set to 0. If any of the optional MAC address properties are not present,
|
||||
then the driver will use random MAC address.
|
||||
|
||||
Example binding:
|
||||
|
||||
netcp: netcp@2000000 {
|
||||
|
|
|
@ -26,9 +26,8 @@ Required properties:
|
|||
Optional elements: 'tsu_clk'
|
||||
- clocks: Phandles to input clocks.
|
||||
|
||||
Optional properties:
|
||||
- nvmem-cells: phandle, reference to an nvmem node for the MAC address
|
||||
- nvmem-cell-names: string, should be "mac-address" if nvmem is to be used
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Optional properties for PHY child node:
|
||||
- reset-gpios : Should specify the gpio for phy reset
|
||||
|
|
|
@ -11,7 +11,9 @@ Optional properties:
|
|||
- #address-cells: must be 1 when using sub-nodes.
|
||||
- #size-cells: must be 0 when using sub-nodes.
|
||||
- phy-handle: see ethernet.txt file in the same directory.
|
||||
- local-mac-address: see ethernet.txt file in the same directory.
|
||||
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Sub-nodes:
|
||||
Each PHY can be represented as a sub-node. This is not mandatory.
|
||||
|
|
|
@ -21,8 +21,9 @@ Optional properties:
|
|||
- spi-max-frequency: Maximum frequency of the SPI bus when accessing the ENC28J60.
|
||||
According to the ENC28J80 datasheet, the chip allows a maximum of 20 MHz, however,
|
||||
board designs may need to limit this value.
|
||||
- local-mac-address: See ethernet.txt in the same directory.
|
||||
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Example (for NXP i.MX28 with pin control stuff for GPIO irq):
|
||||
|
||||
|
|
|
@ -7,9 +7,8 @@ The Device Tree properties, if present, override the OTP and EEPROM.
|
|||
Required properties:
|
||||
- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850".
|
||||
|
||||
Optional properties:
|
||||
- local-mac-address: see ethernet.txt
|
||||
- mac-address: see ethernet.txt
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Optional properties of the embedded PHY:
|
||||
- microchip,led-modes: a 0..4 element vector, with each element configuring
|
||||
|
|
|
@ -23,7 +23,6 @@ Optional properties:
|
|||
Numbers smaller than 1000000 or greater than 16000000
|
||||
are invalid. Missing the property will set the SPI
|
||||
frequency to 8000000 Hertz.
|
||||
- local-mac-address : see ./ethernet.txt
|
||||
- qca,legacy-mode : Set the SPI data transfer of the QCA7000 to legacy mode.
|
||||
In this mode the SPI master must toggle the chip select
|
||||
between each data word. In burst mode these gaps aren't
|
||||
|
@ -31,6 +30,9 @@ Optional properties:
|
|||
the QCA7000 is setup via GPIO pin strapping. If the
|
||||
property is missing the driver defaults to burst mode.
|
||||
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
SPI Example:
|
||||
|
||||
/* Freescale i.MX28 SPI master*/
|
||||
|
|
|
@ -21,10 +21,12 @@ Required properties:
|
|||
range.
|
||||
|
||||
Optional properties:
|
||||
- mac-address: 6 bytes, mac address
|
||||
- max-frame-size: Maximum Transfer Unit (IEEE defined MTU), rather
|
||||
than the maximum frame size.
|
||||
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Example:
|
||||
|
||||
aliases {
|
||||
|
|
|
@ -103,8 +103,6 @@ Required properties:
|
|||
|
||||
Optional properties:
|
||||
- dma-coherent: Present if dma operations are coherent
|
||||
- mac-address: See ethernet.txt in the same directory
|
||||
- local-mac-address: See ethernet.txt in the same directory
|
||||
- phy-reset-gpios: Phandle and specifier for any GPIO used to reset the PHY.
|
||||
See ../gpio/gpio.txt.
|
||||
- snps,en-lpi: If present it enables use of the AXI low-power interface
|
||||
|
@ -133,6 +131,9 @@ Optional properties:
|
|||
- device_type: Must be "ethernet-phy".
|
||||
- fixed-mode device tree subnode: see fixed-link.txt in the same directory
|
||||
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Examples:
|
||||
ethernet2@40010000 {
|
||||
clock-names = "phy_ref_clk", "apb_pclk";
|
||||
|
|
|
@ -31,8 +31,8 @@ Required properties:
|
|||
- socionext,syscon-phy-mode: A phandle to syscon with one argument
|
||||
that configures phy mode. The argument is the ID of MAC instance.
|
||||
|
||||
Optional properties:
|
||||
- local-mac-address: See ethernet.txt in the same directory.
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Required subnode:
|
||||
- mdio: A container for child nodes representing phy nodes.
|
||||
|
|
|
@ -26,11 +26,12 @@ Required properties:
|
|||
Optional properties: (See ethernet.txt file in the same directory)
|
||||
- dma-coherent: Boolean property, must only be present if memory
|
||||
accesses performed by the device are cache coherent.
|
||||
- local-mac-address: See ethernet.txt in the same directory.
|
||||
- mac-address: See ethernet.txt in the same directory.
|
||||
- max-speed: See ethernet.txt in the same directory.
|
||||
- max-frame-size: See ethernet.txt in the same directory.
|
||||
|
||||
The MAC address will be determined using the optional properties
|
||||
defined in ethernet.txt.
|
||||
|
||||
Example:
|
||||
eth0: ethernet@522d0000 {
|
||||
compatible = "socionext,synquacer-netsec";
|
||||
|
|
|
@ -13,11 +13,12 @@ properties:
|
|||
|
||||
Optional properties:
|
||||
|
||||
- mac-address: See ethernet.txt in the parent directory
|
||||
- local-mac-address: See ethernet.txt in the parent directory
|
||||
- ieee80211-freq-limit: See ieee80211.txt
|
||||
- mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data
|
||||
|
||||
The driver is using of_get_mac_address API, so the MAC address can be as well
|
||||
be set with corresponding optional properties defined in net/ethernet.txt.
|
||||
|
||||
Optional nodes:
|
||||
- led: Properties for a connected LED
|
||||
Optional properties:
|
||||
|
|
|
@ -34,9 +34,9 @@ Optional properties:
|
|||
ath9k wireless chip (in this case the calibration /
|
||||
EEPROM data will be loaded from userspace using the
|
||||
kernel firmware loader).
|
||||
- mac-address: See ethernet.txt in the parent directory
|
||||
- local-mac-address: See ethernet.txt in the parent directory
|
||||
|
||||
The MAC address will be determined using the optional properties defined in
|
||||
net/ethernet.txt.
|
||||
|
||||
In this example, the node is defined as child node of the PCI controller:
|
||||
&pci0 {
|
||||
|
|
Loading…
Reference in New Issue
Block a user