diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index ad733caec720..4ed7d65dd634 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -1309,10 +1309,13 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar
 	case VIDIOC_INT_S_VIDEO_ROUTING:
 	{
 		struct v4l2_routing *route = arg;
+		u32 input = route->input;
+		u8 mask = (state->ident == V4L2_IDENT_SAA7111) ? 0xf8 : 0xf0;
 
 		v4l_dbg(1, debug, client, "decoder set input %d output %d\n", route->input, route->output);
-		/* saa7113 does not have these inputs */
-		if (state->ident == V4L2_IDENT_SAA7113 &&
+		/* saa7111/3 does not have these inputs */
+		if ((state->ident == V4L2_IDENT_SAA7113 ||
+		     state->ident == V4L2_IDENT_SAA7111) &&
 		    (route->input == SAA7115_COMPOSITE4 ||
 		     route->input == SAA7115_COMPOSITE5)) {
 			return -EINVAL;
@@ -1327,10 +1330,23 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar
 			(route->input >= SAA7115_SVIDEO0) ? "S-Video" : "Composite", (route->output == SAA7115_IPORT_ON) ? "iport on" : "iport off");
 		state->input = route->input;
 
+		/* saa7111 has slightly different input numbering */
+		if (state->ident == V4L2_IDENT_SAA7111) {
+			if (input >= SAA7115_COMPOSITE4)
+				input -= 2;
+			/* saa7111 specific */
+			saa711x_write(client, R_10_CHROMA_CNTL_2,
+					(saa711x_read(client, R_10_CHROMA_CNTL_2) & 0x3f) |
+					((route->output & 0xc0) ^ 0x40));
+			saa711x_write(client, R_13_RT_X_PORT_OUT_CNTL,
+					(saa711x_read(client, R_13_RT_X_PORT_OUT_CNTL) & 0xf0) |
+					((route->output & 2) ? 0x0a : 0));
+		}
+
 		/* select mode */
 		saa711x_write(client, R_02_INPUT_CNTL_1,
-			      (saa711x_read(client, R_02_INPUT_CNTL_1) & 0xf0) |
-			       state->input);
+			      (saa711x_read(client, R_02_INPUT_CNTL_1) & mask) |
+			       input);
 
 		/* bypass chrominance trap for S-Video modes */
 		saa711x_write(client, R_09_LUMA_CNTL,
@@ -1384,6 +1400,13 @@ static int saa7115_command(struct i2c_client *client, unsigned int cmd, void *ar
 		saa711x_writeregs(client, saa7115_cfg_reset_scaler);
 		break;
 
+	case VIDIOC_INT_S_GPIO:
+		if (state->ident != V4L2_IDENT_SAA7111)
+			return -EINVAL;
+		saa711x_write(client, 0x11, (saa711x_read(client, 0x11) & 0x7f) |
+			(*(u32 *)arg ? 0x80 : 0));
+		break;
+
 	case VIDIOC_INT_G_VBI_DATA:
 	{
 		struct v4l2_sliced_vbi_data *data = arg;
@@ -1539,7 +1562,8 @@ static int saa7115_probe(struct i2c_client *client,
 		state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
 		saa711x_writeregs(client, saa7115_init_auto_input);
 	}
-	saa711x_writeregs(client, saa7115_init_misc);
+	if (state->ident != V4L2_IDENT_SAA7111)
+		saa711x_writeregs(client, saa7115_init_misc);
 	saa711x_set_v4lstd(client, V4L2_STD_NTSC);
 
 	v4l_dbg(1, debug, client, "status: (1E) 0x%02x, (1F) 0x%02x\n",
diff --git a/include/media/saa7115.h b/include/media/saa7115.h
index f677dfb9d373..bab212719591 100644
--- a/include/media/saa7115.h
+++ b/include/media/saa7115.h
@@ -1,5 +1,5 @@
 /*
-    saa7115.h - definition for saa7113/4/5 inputs and frequency flags
+    saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags
 
     Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
 
@@ -21,13 +21,13 @@
 #ifndef _SAA7115_H_
 #define _SAA7115_H_
 
-/* SAA7113/4/5 HW inputs */
+/* SAA7111/3/4/5 HW inputs */
 #define SAA7115_COMPOSITE0 0
 #define SAA7115_COMPOSITE1 1
 #define SAA7115_COMPOSITE2 2
 #define SAA7115_COMPOSITE3 3
-#define SAA7115_COMPOSITE4 4 /* not available for the saa7113 */
-#define SAA7115_COMPOSITE5 5 /* not available for the saa7113 */
+#define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */
+#define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */
 #define SAA7115_SVIDEO0    6
 #define SAA7115_SVIDEO1    7
 #define SAA7115_SVIDEO2    8
@@ -42,8 +42,15 @@
 #define SAA7115_FREQ_FL_CGCDIV (1 << 1)	   /* SA 3A[6], CGCDIV, SAA7115 only */
 #define SAA7115_FREQ_FL_APLL   (1 << 2)	   /* SA 3A[3], APLL, SAA7114/5 only */
 
-#define SAA7115_IPORT_ON    1
-#define SAA7115_IPORT_OFF   0
+#define SAA7115_IPORT_ON    	1
+#define SAA7115_IPORT_OFF   	0
+
+/* SAA7111 specific output flags */
+#define SAA7111_VBI_BYPASS 	2
+#define SAA7111_FMT_YUV422      0x00
+#define SAA7111_FMT_RGB 	0x40
+#define SAA7111_FMT_CCIR 	0x80
+#define SAA7111_FMT_YUV411 	0xc0
 
 #endif
 
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 0c195ccd45d2..2f8719abf5cb 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -225,18 +225,22 @@ struct v4l2_crystal_freq {
    An extra flags field allows device specific configuration regarding
    clock frequency dividers, etc. If not used, then set flags to 0.
    If the frequency is not supported, then -EINVAL is returned. */
-#define VIDIOC_INT_S_CRYSTAL_FREQ 	_IOW ('d', 113, struct v4l2_crystal_freq)
+#define VIDIOC_INT_S_CRYSTAL_FREQ 	_IOW('d', 113, struct v4l2_crystal_freq)
 
 /* Initialize the sensor registors to some sort of reasonable
    default values. */
-#define VIDIOC_INT_INIT			_IOW ('d', 114, u32)
+#define VIDIOC_INT_INIT			_IOW('d', 114, u32)
 
 /* Set v4l2_std_id for video OUTPUT devices. This is ignored by
    video input devices. */
-#define VIDIOC_INT_S_STD_OUTPUT		_IOW  ('d', 115, v4l2_std_id)
+#define VIDIOC_INT_S_STD_OUTPUT		_IOW('d', 115, v4l2_std_id)
 
 /* Get v4l2_std_id for video OUTPUT devices. This is ignored by
    video input devices. */
-#define VIDIOC_INT_G_STD_OUTPUT		_IOW  ('d', 116, v4l2_std_id)
+#define VIDIOC_INT_G_STD_OUTPUT		_IOW('d', 116, v4l2_std_id)
+
+/* Set GPIO pins. Very simple right now, might need to be extended with
+   a v4l2_gpio struct if a direction is also needed. */
+#define VIDIOC_INT_S_GPIO		_IOW('d', 117, u32)
 
 #endif /* V4L2_COMMON_H_ */