AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

[media] smiapp-pll: Try other pre-pll divisors

Browse Source 
The smiapp pll calculator assumed that the minimum pre-pll divisor was
perfect. That may not always be the case, so let's try the others, too.
Typically there are just a few alternatives.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Sakari Ailus 2012-10-22 16:27:27 -03:00 committed by Mauro Carvalho Chehab
parent c2ebca0032
commit 6de1b143a4
1 changed files with 73 additions and 58 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

131
drivers/media/i2c/smiapp-pll.c
View File

@ -58,7 +58,7 @@ static int bounds_check(struct device *dev, uint32_t val,
if (val >= min && val <= max)
return 0;
dev_warn(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max);
dev_dbg(dev, "%s out of bounds: %d (%d--%d)\n", str, val, min, max);
return -EINVAL;
}
@ -87,14 +87,14 @@ static void print_pll(struct device *dev, struct smiapp_pll *pll)
dev_dbg(dev, "vt_pix_clk_freq_hz \t%d\n", pll->vt_pix_clk_freq_hz);
}
int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
struct smiapp_pll *pll)
static int __smiapp_pll_calculate(struct device *dev,
struct smiapp_pll_limits *limits,
struct smiapp_pll *pll, uint32_t mul,
uint32_t div, uint32_t lane_op_clock_ratio)
{
uint32_t sys_div;
uint32_t best_pix_div = INT_MAX >> 1;
uint32_t vt_op_binning_div;
uint32_t lane_op_clock_ratio;
uint32_t mul, div;
uint32_t more_mul_min, more_mul_max;
uint32_t more_mul_factor;
uint32_t min_vt_div, max_vt_div, vt_div;
@ -102,54 +102,6 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
unsigned int i;
int rval;
if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE)
lane_op_clock_ratio = pll->lanes;
else
lane_op_clock_ratio = 1;
dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio);
dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal,
pll->binning_vertical);
/* CSI transfers 2 bits per clock per lane; thus times 2 */
pll->pll_op_clk_freq_hz = pll->link_freq * 2
* (pll->lanes / lane_op_clock_ratio);
/* Figure out limits for pre-pll divider based on extclk */
dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
limits->max_pre_pll_clk_div =
min_t(uint16_t, limits->max_pre_pll_clk_div,
clk_div_even(pll->ext_clk_freq_hz /
limits->min_pll_ip_freq_hz));
limits->min_pre_pll_clk_div =
max_t(uint16_t, limits->min_pre_pll_clk_div,
clk_div_even_up(
DIV_ROUND_UP(pll->ext_clk_freq_hz,
limits->max_pll_ip_freq_hz)));
dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz);
mul = div_u64(pll->pll_op_clk_freq_hz, i);
div = pll->ext_clk_freq_hz / i;
dev_dbg(dev, "mul %d / div %d\n", mul, div);
limits->min_pre_pll_clk_div =
max_t(uint16_t, limits->min_pre_pll_clk_div,
clk_div_even_up(
DIV_ROUND_UP(mul * pll->ext_clk_freq_hz,
limits->max_pll_op_freq_hz)));
dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
if (limits->min_pre_pll_clk_div > limits->max_pre_pll_clk_div) {
dev_err(dev, "unable to compute pre_pll divisor\n");
return -EINVAL;
}
pll->pre_pll_clk_div = limits->min_pre_pll_clk_div;
/*
* Get pre_pll_clk_div so that our pll_op_clk_freq_hz won't be
* too high.
@ -193,8 +145,8 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
more_mul_min);
if (more_mul_min > more_mul_max) {
dev_warn(dev,
"unable to compute more_mul_min and more_mul_max\n");
dev_dbg(dev,
"unable to compute more_mul_min and more_mul_max\n");
return -EINVAL;
}
@ -209,7 +161,7 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
dev_dbg(dev, "final more_mul: %d\n", i);
if (i > more_mul_max) {
dev_warn(dev, "final more_mul is bad, max %d\n", more_mul_max);
dev_dbg(dev, "final more_mul is bad, max %d\n", more_mul_max);
return -EINVAL;
}
@ -354,8 +306,6 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
pll->pixel_rate_csi =
pll->op_pix_clk_freq_hz * lane_op_clock_ratio;
print_pll(dev, pll);
rval = bounds_check(dev, pll->pre_pll_clk_div,
limits->min_pre_pll_clk_div,
limits->max_pre_pll_clk_div, "pre_pll_clk_div");
@ -411,6 +361,71 @@ int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
return rval;
}
int smiapp_pll_calculate(struct device *dev, struct smiapp_pll_limits *limits,
struct smiapp_pll *pll)
{
uint32_t lane_op_clock_ratio;
uint32_t mul, div;
unsigned int i;
int rval = -EINVAL;
if (pll->flags & SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE)
lane_op_clock_ratio = pll->lanes;
else
lane_op_clock_ratio = 1;
dev_dbg(dev, "lane_op_clock_ratio: %d\n", lane_op_clock_ratio);
dev_dbg(dev, "binning: %dx%d\n", pll->binning_horizontal,
pll->binning_vertical);
/* CSI transfers 2 bits per clock per lane; thus times 2 */
pll->pll_op_clk_freq_hz = pll->link_freq * 2
* (pll->lanes / lane_op_clock_ratio);
/* Figure out limits for pre-pll divider based on extclk */
dev_dbg(dev, "min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
limits->max_pre_pll_clk_div =
min_t(uint16_t, limits->max_pre_pll_clk_div,
clk_div_even(pll->ext_clk_freq_hz /
limits->min_pll_ip_freq_hz));
limits->min_pre_pll_clk_div =
max_t(uint16_t, limits->min_pre_pll_clk_div,
clk_div_even_up(
DIV_ROUND_UP(pll->ext_clk_freq_hz,
limits->max_pll_ip_freq_hz)));
dev_dbg(dev, "pre-pll check: min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
i = gcd(pll->pll_op_clk_freq_hz, pll->ext_clk_freq_hz);
mul = div_u64(pll->pll_op_clk_freq_hz, i);
div = pll->ext_clk_freq_hz / i;
dev_dbg(dev, "mul %d / div %d\n", mul, div);
limits->min_pre_pll_clk_div =
max_t(uint16_t, limits->min_pre_pll_clk_div,
clk_div_even_up(
DIV_ROUND_UP(mul * pll->ext_clk_freq_hz,
limits->max_pll_op_freq_hz)));
dev_dbg(dev, "pll_op check: min / max pre_pll_clk_div: %d / %d\n",
limits->min_pre_pll_clk_div, limits->max_pre_pll_clk_div);
for (pll->pre_pll_clk_div = limits->min_pre_pll_clk_div;
pll->pre_pll_clk_div <= limits->max_pre_pll_clk_div;
pll->pre_pll_clk_div += 2 - (pll->pre_pll_clk_div & 1)) {
rval = __smiapp_pll_calculate(dev, limits, pll, mul, div,
lane_op_clock_ratio);
if (rval)
continue;
print_pll(dev, pll);
return 0;
}
dev_info(dev, "unable to compute pre_pll divisor\n");
return rval;
}
EXPORT_SYMBOL_GPL(smiapp_pll_calculate);
MODULE_AUTHOR("Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>");