forked from luck/tmp_suning_uos_patched
gpio/omap: fix incorrect initialization of omap_gpio_mod_init
Initialization of irqenable, irqstatus registers is the common operation done in this function for all OMAP platforms, viz. OMAP1, OMAP2+. The latter _gpio_rmw()'s which supposedly got introduced wrongly to take care of OMAP2+ platforms were overwriting initially programmed OMAP1 value breaking functionality on OMAP1. Somehow incorrect assumption was made that each _gpio_rmw()'s were mutually exclusive. On close observation it is found that the first _gpio_rmw() which is supposedly done to take care of OMAP1 platform is generic enough and takes care of OMAP2+ platform as well. Therefore remove the latter _gpio_rmw() to irqenable as they are redundant now. Writing to ctrl and debounce_en registers for OMAP2+ platforms are modified to match the original(pre-cleanup) code where the registers are initialized with 0. In the cleanup series since we are using _gpio_rmw(reg, 0, 1), instead of __raw_writel(), we are just reading and writing the same values to ctrl and debounce_en. This is not an issue for debounce_en register because it has 0x0 as the default value. But in the case of ctrl register the default value is 0x2 (GATINGRATIO = 0x1) so that we end up writing 0x2 instead of intended 0 value. Therefore changing back to __raw_writel() as this is sufficient for this case besides simpler to understand. Also, change irqstatus initalization logic that avoids comparison with bool, besides making it fit in a single line. Cc: stable@vger.kernel.org Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Reported-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
This commit is contained in:
parent
d48b97b403
commit
6edd94db25
|
@ -965,18 +965,15 @@ static void omap_gpio_mod_init(struct gpio_bank *bank)
|
|||
}
|
||||
|
||||
_gpio_rmw(base, bank->regs->irqenable, l, bank->regs->irqenable_inv);
|
||||
_gpio_rmw(base, bank->regs->irqstatus, l,
|
||||
bank->regs->irqenable_inv == false);
|
||||
_gpio_rmw(base, bank->regs->irqenable, l, bank->regs->debounce_en != 0);
|
||||
_gpio_rmw(base, bank->regs->irqenable, l, bank->regs->ctrl != 0);
|
||||
_gpio_rmw(base, bank->regs->irqstatus, l, !bank->regs->irqenable_inv);
|
||||
if (bank->regs->debounce_en)
|
||||
_gpio_rmw(base, bank->regs->debounce_en, 0, 1);
|
||||
__raw_writel(0, base + bank->regs->debounce_en);
|
||||
|
||||
/* Save OE default value (0xffffffff) in the context */
|
||||
bank->context.oe = __raw_readl(bank->base + bank->regs->direction);
|
||||
/* Initialize interface clk ungated, module enabled */
|
||||
if (bank->regs->ctrl)
|
||||
_gpio_rmw(base, bank->regs->ctrl, 0, 1);
|
||||
__raw_writel(0, base + bank->regs->ctrl);
|
||||
}
|
||||
|
||||
static __devinit void
|
||||
|
|
Loading…
Reference in New Issue
Block a user