From 6ff01dbb1130ff7e53d832884068e4c3a6a2ecec Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 16 Apr 2014 17:19:13 +0200 Subject: [PATCH] net: phy: at803x: use genphy_config_init() Use the generic bits from genphy_config_init() instead of implementing the same functionality again. Signed-off-by: Daniel Mack Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/phy/at803x.c | 36 +++--------------------------------- 1 file changed, 3 insertions(+), 33 deletions(-) diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 643464d5a727..b256083aa69e 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -144,41 +144,11 @@ static int at803x_resume(struct phy_device *phydev) static int at803x_config_init(struct phy_device *phydev) { - int val; int ret; - u32 features; - features = SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_AUI | - SUPPORTED_FIBRE | SUPPORTED_BNC; - - val = phy_read(phydev, MII_BMSR); - if (val < 0) - return val; - - if (val & BMSR_ANEGCAPABLE) - features |= SUPPORTED_Autoneg; - if (val & BMSR_100FULL) - features |= SUPPORTED_100baseT_Full; - if (val & BMSR_100HALF) - features |= SUPPORTED_100baseT_Half; - if (val & BMSR_10FULL) - features |= SUPPORTED_10baseT_Full; - if (val & BMSR_10HALF) - features |= SUPPORTED_10baseT_Half; - - if (val & BMSR_ESTATEN) { - val = phy_read(phydev, MII_ESTATUS); - if (val < 0) - return val; - - if (val & ESTATUS_1000_TFULL) - features |= SUPPORTED_1000baseT_Full; - if (val & ESTATUS_1000_THALF) - features |= SUPPORTED_1000baseT_Half; - } - - phydev->supported = features; - phydev->advertising = features; + ret = genphy_config_init(phydev); + if (ret < 0) + return ret; if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { ret = phy_write(phydev, AT803X_DEBUG_ADDR,