forked from luck/tmp_suning_uos_patched
Merge branch 'tg3'
Nithin Nayak Sujir says: ==================== This patch and the following two patches add support for link flap avoidance by maintaining the link on power down. This feature is required for management capable devices to have the management connection uninterrupted on driver reload, reboot and interface up/down. The other pros of this feature are - It speeds up boot up time by several seconds as DHCP addresses can be acquired faster. - It avoids lengthy Spanning Tree delay. On powerup the hardware brings up the phy with default settings. If the link is not up, the management software configures the phy to gigabit and starts autonegotiate. Subsequently, as long as the link is up, the driver and management refrain from resetting and/or changing any configuration that the link depends on. The LNK_FLAP_AVOID setting is an NVRAM user configurable bit and is disabled by default. If this setting is enabled, we skip powering down the phy and resetting it. A second NVRAM setting is 1G_ON_VAUX_OK (off by default). This adds support for gigabit link speed when device is on auxiliary power. ==================== Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
commit
712c4b7439
|
@ -1764,7 +1764,7 @@ F: arch/arm/configs/bcm2835_defconfig
|
|||
F: drivers/*/*bcm2835*
|
||||
|
||||
BROADCOM TG3 GIGABIT ETHERNET DRIVER
|
||||
M: Matt Carlson <mcarlson@broadcom.com>
|
||||
M: Nithin Nayak Sujir <nsujir@broadcom.com>
|
||||
M: Michael Chan <mchan@broadcom.com>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Supported
|
||||
|
|
|
@ -94,10 +94,10 @@ static inline void _tg3_flag_clear(enum TG3_FLAGS flag, unsigned long *bits)
|
|||
|
||||
#define DRV_MODULE_NAME "tg3"
|
||||
#define TG3_MAJ_NUM 3
|
||||
#define TG3_MIN_NUM 130
|
||||
#define TG3_MIN_NUM 131
|
||||
#define DRV_MODULE_VERSION \
|
||||
__stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM)
|
||||
#define DRV_MODULE_RELDATE "February 14, 2013"
|
||||
#define DRV_MODULE_RELDATE "April 09, 2013"
|
||||
|
||||
#define RESET_KIND_SHUTDOWN 0
|
||||
#define RESET_KIND_INIT 1
|
||||
|
@ -1874,6 +1874,20 @@ static void tg3_link_report(struct tg3 *tp)
|
|||
tp->link_up = netif_carrier_ok(tp->dev);
|
||||
}
|
||||
|
||||
static u32 tg3_decode_flowctrl_1000T(u32 adv)
|
||||
{
|
||||
u32 flowctrl = 0;
|
||||
|
||||
if (adv & ADVERTISE_PAUSE_CAP) {
|
||||
flowctrl |= FLOW_CTRL_RX;
|
||||
if (!(adv & ADVERTISE_PAUSE_ASYM))
|
||||
flowctrl |= FLOW_CTRL_TX;
|
||||
} else if (adv & ADVERTISE_PAUSE_ASYM)
|
||||
flowctrl |= FLOW_CTRL_TX;
|
||||
|
||||
return flowctrl;
|
||||
}
|
||||
|
||||
static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl)
|
||||
{
|
||||
u16 miireg;
|
||||
|
@ -1890,6 +1904,20 @@ static u16 tg3_advert_flowctrl_1000X(u8 flow_ctrl)
|
|||
return miireg;
|
||||
}
|
||||
|
||||
static u32 tg3_decode_flowctrl_1000X(u32 adv)
|
||||
{
|
||||
u32 flowctrl = 0;
|
||||
|
||||
if (adv & ADVERTISE_1000XPAUSE) {
|
||||
flowctrl |= FLOW_CTRL_RX;
|
||||
if (!(adv & ADVERTISE_1000XPSE_ASYM))
|
||||
flowctrl |= FLOW_CTRL_TX;
|
||||
} else if (adv & ADVERTISE_1000XPSE_ASYM)
|
||||
flowctrl |= FLOW_CTRL_TX;
|
||||
|
||||
return flowctrl;
|
||||
}
|
||||
|
||||
static u8 tg3_resolve_flowctrl_1000X(u16 lcladv, u16 rmtadv)
|
||||
{
|
||||
u8 cap = 0;
|
||||
|
@ -2531,6 +2559,13 @@ static void tg3_carrier_off(struct tg3 *tp)
|
|||
tp->link_up = false;
|
||||
}
|
||||
|
||||
static void tg3_warn_mgmt_link_flap(struct tg3 *tp)
|
||||
{
|
||||
if (tg3_flag(tp, ENABLE_ASF))
|
||||
netdev_warn(tp->dev,
|
||||
"Management side-band traffic will be interrupted during phy settings change\n");
|
||||
}
|
||||
|
||||
/* This will reset the tigon3 PHY if there is no valid
|
||||
* link unless the FORCE argument is non-zero.
|
||||
*/
|
||||
|
@ -2926,6 +2961,9 @@ static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power)
|
|||
{
|
||||
u32 val;
|
||||
|
||||
if (tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN)
|
||||
return;
|
||||
|
||||
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) {
|
||||
if (tg3_asic_rev(tp) == ASIC_REV_5704) {
|
||||
u32 sg_dig_ctrl = tr32(SG_DIG_CTRL);
|
||||
|
@ -3989,7 +4027,13 @@ static int tg3_power_down_prepare(struct tg3 *tp)
|
|||
|
||||
if (tp->phy_flags & TG3_PHYFLG_MII_SERDES)
|
||||
mac_mode = MAC_MODE_PORT_MODE_GMII;
|
||||
else
|
||||
else if (tp->phy_flags &
|
||||
TG3_PHYFLG_KEEP_LINK_ON_PWRDN) {
|
||||
if (tp->link_config.active_speed == SPEED_1000)
|
||||
mac_mode = MAC_MODE_PORT_MODE_GMII;
|
||||
else
|
||||
mac_mode = MAC_MODE_PORT_MODE_MII;
|
||||
} else
|
||||
mac_mode = MAC_MODE_PORT_MODE_MII;
|
||||
|
||||
mac_mode |= tp->mac_mode & MAC_MODE_LINK_POLARITY;
|
||||
|
@ -4243,12 +4287,16 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
|
|||
(tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)) {
|
||||
u32 adv, fc;
|
||||
|
||||
if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) {
|
||||
if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) &&
|
||||
!(tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN)) {
|
||||
adv = ADVERTISED_10baseT_Half |
|
||||
ADVERTISED_10baseT_Full;
|
||||
if (tg3_flag(tp, WOL_SPEED_100MB))
|
||||
adv |= ADVERTISED_100baseT_Half |
|
||||
ADVERTISED_100baseT_Full;
|
||||
if (tp->phy_flags & TG3_PHYFLG_1G_ON_VAUX_OK)
|
||||
adv |= ADVERTISED_1000baseT_Half |
|
||||
ADVERTISED_1000baseT_Full;
|
||||
|
||||
fc = FLOW_CTRL_TX | FLOW_CTRL_RX;
|
||||
} else {
|
||||
|
@ -4262,6 +4310,15 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
|
|||
|
||||
tg3_phy_autoneg_cfg(tp, adv, fc);
|
||||
|
||||
if ((tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER) &&
|
||||
(tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN)) {
|
||||
/* Normally during power down we want to autonegotiate
|
||||
* the lowest possible speed for WOL. However, to avoid
|
||||
* link flap, we leave it untouched.
|
||||
*/
|
||||
return;
|
||||
}
|
||||
|
||||
tg3_writephy(tp, MII_BMCR,
|
||||
BMCR_ANENABLE | BMCR_ANRESTART);
|
||||
} else {
|
||||
|
@ -4318,6 +4375,103 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
|
|||
}
|
||||
}
|
||||
|
||||
static int tg3_phy_pull_config(struct tg3 *tp)
|
||||
{
|
||||
int err;
|
||||
u32 val;
|
||||
|
||||
err = tg3_readphy(tp, MII_BMCR, &val);
|
||||
if (err)
|
||||
goto done;
|
||||
|
||||
if (!(val & BMCR_ANENABLE)) {
|
||||
tp->link_config.autoneg = AUTONEG_DISABLE;
|
||||
tp->link_config.advertising = 0;
|
||||
tg3_flag_clear(tp, PAUSE_AUTONEG);
|
||||
|
||||
err = -EIO;
|
||||
|
||||
switch (val & (BMCR_SPEED1000 | BMCR_SPEED100)) {
|
||||
case 0:
|
||||
if (tp->phy_flags & TG3_PHYFLG_ANY_SERDES)
|
||||
goto done;
|
||||
|
||||
tp->link_config.speed = SPEED_10;
|
||||
break;
|
||||
case BMCR_SPEED100:
|
||||
if (tp->phy_flags & TG3_PHYFLG_ANY_SERDES)
|
||||
goto done;
|
||||
|
||||
tp->link_config.speed = SPEED_100;
|
||||
break;
|
||||
case BMCR_SPEED1000:
|
||||
if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) {
|
||||
tp->link_config.speed = SPEED_1000;
|
||||
break;
|
||||
}
|
||||
/* Fall through */
|
||||
default:
|
||||
goto done;
|
||||
}
|
||||
|
||||
if (val & BMCR_FULLDPLX)
|
||||
tp->link_config.duplex = DUPLEX_FULL;
|
||||
else
|
||||
tp->link_config.duplex = DUPLEX_HALF;
|
||||
|
||||
tp->link_config.flowctrl = FLOW_CTRL_RX | FLOW_CTRL_TX;
|
||||
|
||||
err = 0;
|
||||
goto done;
|
||||
}
|
||||
|
||||
tp->link_config.autoneg = AUTONEG_ENABLE;
|
||||
tp->link_config.advertising = ADVERTISED_Autoneg;
|
||||
tg3_flag_set(tp, PAUSE_AUTONEG);
|
||||
|
||||
if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES)) {
|
||||
u32 adv;
|
||||
|
||||
err = tg3_readphy(tp, MII_ADVERTISE, &val);
|
||||
if (err)
|
||||
goto done;
|
||||
|
||||
adv = mii_adv_to_ethtool_adv_t(val & ADVERTISE_ALL);
|
||||
tp->link_config.advertising |= adv | ADVERTISED_TP;
|
||||
|
||||
tp->link_config.flowctrl = tg3_decode_flowctrl_1000T(val);
|
||||
} else {
|
||||
tp->link_config.advertising |= ADVERTISED_FIBRE;
|
||||
}
|
||||
|
||||
if (!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY)) {
|
||||
u32 adv;
|
||||
|
||||
if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES)) {
|
||||
err = tg3_readphy(tp, MII_CTRL1000, &val);
|
||||
if (err)
|
||||
goto done;
|
||||
|
||||
adv = mii_ctrl1000_to_ethtool_adv_t(val);
|
||||
} else {
|
||||
err = tg3_readphy(tp, MII_ADVERTISE, &val);
|
||||
if (err)
|
||||
goto done;
|
||||
|
||||
adv = tg3_decode_flowctrl_1000X(val);
|
||||
tp->link_config.flowctrl = adv;
|
||||
|
||||
val &= (ADVERTISE_1000XHALF | ADVERTISE_1000XFULL);
|
||||
adv = mii_adv_to_ethtool_adv_x(val);
|
||||
}
|
||||
|
||||
tp->link_config.advertising |= adv;
|
||||
}
|
||||
|
||||
done:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int tg3_init_5401phy_dsp(struct tg3 *tp)
|
||||
{
|
||||
int err;
|
||||
|
@ -4337,6 +4491,32 @@ static int tg3_init_5401phy_dsp(struct tg3 *tp)
|
|||
return err;
|
||||
}
|
||||
|
||||
static bool tg3_phy_eee_config_ok(struct tg3 *tp)
|
||||
{
|
||||
u32 val;
|
||||
u32 tgtadv = 0;
|
||||
u32 advertising = tp->link_config.advertising;
|
||||
|
||||
if (!(tp->phy_flags & TG3_PHYFLG_EEE_CAP))
|
||||
return true;
|
||||
|
||||
if (tg3_phy_cl45_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, &val))
|
||||
return false;
|
||||
|
||||
val &= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T);
|
||||
|
||||
|
||||
if (advertising & ADVERTISED_100baseT_Full)
|
||||
tgtadv |= MDIO_AN_EEE_ADV_100TX;
|
||||
if (advertising & ADVERTISED_1000baseT_Full)
|
||||
tgtadv |= MDIO_AN_EEE_ADV_1000T;
|
||||
|
||||
if (val != tgtadv)
|
||||
return false;
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
static bool tg3_phy_copper_an_config_ok(struct tg3 *tp, u32 *lcladv)
|
||||
{
|
||||
u32 advmsk, tgtadv, advertising;
|
||||
|
@ -4421,6 +4601,18 @@ static bool tg3_test_and_report_link_chg(struct tg3 *tp, int curr_link_up)
|
|||
return false;
|
||||
}
|
||||
|
||||
static void tg3_clear_mac_status(struct tg3 *tp)
|
||||
{
|
||||
tw32(MAC_EVENT, 0);
|
||||
|
||||
tw32_f(MAC_STATUS,
|
||||
MAC_STATUS_SYNC_CHANGED |
|
||||
MAC_STATUS_CFG_CHANGED |
|
||||
MAC_STATUS_MI_COMPLETION |
|
||||
MAC_STATUS_LNKSTATE_CHANGED);
|
||||
udelay(40);
|
||||
}
|
||||
|
||||
static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
|
||||
{
|
||||
int current_link_up;
|
||||
|
@ -4430,14 +4622,7 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
|
|||
u8 current_duplex;
|
||||
int i, err;
|
||||
|
||||
tw32(MAC_EVENT, 0);
|
||||
|
||||
tw32_f(MAC_STATUS,
|
||||
(MAC_STATUS_SYNC_CHANGED |
|
||||
MAC_STATUS_CFG_CHANGED |
|
||||
MAC_STATUS_MI_COMPLETION |
|
||||
MAC_STATUS_LNKSTATE_CHANGED));
|
||||
udelay(40);
|
||||
tg3_clear_mac_status(tp);
|
||||
|
||||
if ((tp->mi_mode & MAC_MI_MODE_AUTO_POLL) != 0) {
|
||||
tw32_f(MAC_MI_MODE,
|
||||
|
@ -4580,16 +4765,26 @@ static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
|
|||
tp->link_config.active_duplex = current_duplex;
|
||||
|
||||
if (tp->link_config.autoneg == AUTONEG_ENABLE) {
|
||||
bool eee_config_ok = tg3_phy_eee_config_ok(tp);
|
||||
|
||||
if ((bmcr & BMCR_ANENABLE) &&
|
||||
eee_config_ok &&
|
||||
tg3_phy_copper_an_config_ok(tp, &lcl_adv) &&
|
||||
tg3_phy_copper_fetch_rmtadv(tp, &rmt_adv))
|
||||
current_link_up = 1;
|
||||
|
||||
/* EEE settings changes take effect only after a phy
|
||||
* reset. If we have skipped a reset due to Link Flap
|
||||
* Avoidance being enabled, do it now.
|
||||
*/
|
||||
if (!eee_config_ok &&
|
||||
(tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) &&
|
||||
!force_reset)
|
||||
tg3_phy_reset(tp);
|
||||
} else {
|
||||
if (!(bmcr & BMCR_ANENABLE) &&
|
||||
tp->link_config.speed == current_speed &&
|
||||
tp->link_config.duplex == current_duplex &&
|
||||
tp->link_config.flowctrl ==
|
||||
tp->link_config.active_flowctrl) {
|
||||
tp->link_config.duplex == current_duplex) {
|
||||
current_link_up = 1;
|
||||
}
|
||||
}
|
||||
|
@ -5455,31 +5650,60 @@ static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
|
|||
|
||||
static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
|
||||
{
|
||||
int current_link_up, err = 0;
|
||||
int current_link_up = 0, err = 0;
|
||||
u32 bmsr, bmcr;
|
||||
u16 current_speed;
|
||||
u8 current_duplex;
|
||||
u32 local_adv, remote_adv;
|
||||
u16 current_speed = SPEED_UNKNOWN;
|
||||
u8 current_duplex = DUPLEX_UNKNOWN;
|
||||
u32 local_adv, remote_adv, sgsr;
|
||||
|
||||
if ((tg3_asic_rev(tp) == ASIC_REV_5719 ||
|
||||
tg3_asic_rev(tp) == ASIC_REV_5720) &&
|
||||
!tg3_readphy(tp, SERDES_TG3_1000X_STATUS, &sgsr) &&
|
||||
(sgsr & SERDES_TG3_SGMII_MODE)) {
|
||||
|
||||
if (force_reset)
|
||||
tg3_phy_reset(tp);
|
||||
|
||||
tp->mac_mode &= ~MAC_MODE_PORT_MODE_MASK;
|
||||
|
||||
if (!(sgsr & SERDES_TG3_LINK_UP)) {
|
||||
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
|
||||
} else {
|
||||
current_link_up = 1;
|
||||
if (sgsr & SERDES_TG3_SPEED_1000) {
|
||||
current_speed = SPEED_1000;
|
||||
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
|
||||
} else if (sgsr & SERDES_TG3_SPEED_100) {
|
||||
current_speed = SPEED_100;
|
||||
tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
|
||||
} else {
|
||||
current_speed = SPEED_10;
|
||||
tp->mac_mode |= MAC_MODE_PORT_MODE_MII;
|
||||
}
|
||||
|
||||
if (sgsr & SERDES_TG3_FULL_DUPLEX)
|
||||
current_duplex = DUPLEX_FULL;
|
||||
else
|
||||
current_duplex = DUPLEX_HALF;
|
||||
}
|
||||
|
||||
tw32_f(MAC_MODE, tp->mac_mode);
|
||||
udelay(40);
|
||||
|
||||
tg3_clear_mac_status(tp);
|
||||
|
||||
goto fiber_setup_done;
|
||||
}
|
||||
|
||||
tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
|
||||
tw32_f(MAC_MODE, tp->mac_mode);
|
||||
udelay(40);
|
||||
|
||||
tw32(MAC_EVENT, 0);
|
||||
|
||||
tw32_f(MAC_STATUS,
|
||||
(MAC_STATUS_SYNC_CHANGED |
|
||||
MAC_STATUS_CFG_CHANGED |
|
||||
MAC_STATUS_MI_COMPLETION |
|
||||
MAC_STATUS_LNKSTATE_CHANGED));
|
||||
udelay(40);
|
||||
tg3_clear_mac_status(tp);
|
||||
|
||||
if (force_reset)
|
||||
tg3_phy_reset(tp);
|
||||
|
||||
current_link_up = 0;
|
||||
current_speed = SPEED_UNKNOWN;
|
||||
current_duplex = DUPLEX_UNKNOWN;
|
||||
tp->link_config.rmt_adv = 0;
|
||||
|
||||
err |= tg3_readphy(tp, MII_BMSR, &bmsr);
|
||||
|
@ -5597,6 +5821,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset)
|
|||
}
|
||||
}
|
||||
|
||||
fiber_setup_done:
|
||||
if (current_link_up == 1 && current_duplex == DUPLEX_FULL)
|
||||
tg3_setup_flow_control(tp, local_adv, remote_adv);
|
||||
|
||||
|
@ -8697,6 +8922,9 @@ static int tg3_chip_reset(struct tg3 *tp)
|
|||
|
||||
/* Reprobe ASF enable state. */
|
||||
tg3_flag_clear(tp, ENABLE_ASF);
|
||||
tp->phy_flags &= ~(TG3_PHYFLG_1G_ON_VAUX_OK |
|
||||
TG3_PHYFLG_KEEP_LINK_ON_PWRDN);
|
||||
|
||||
tg3_flag_clear(tp, ASF_NEW_HANDSHAKE);
|
||||
tg3_read_mem(tp, NIC_SRAM_DATA_SIG, &val);
|
||||
if (val == NIC_SRAM_DATA_SIG_MAGIC) {
|
||||
|
@ -8708,6 +8936,12 @@ static int tg3_chip_reset(struct tg3 *tp)
|
|||
tp->last_event_jiffies = jiffies;
|
||||
if (tg3_flag(tp, 5750_PLUS))
|
||||
tg3_flag_set(tp, ASF_NEW_HANDSHAKE);
|
||||
|
||||
tg3_read_mem(tp, NIC_SRAM_DATA_CFG_3, &nic_cfg);
|
||||
if (nic_cfg & NIC_SRAM_1G_ON_VAUX_OK)
|
||||
tp->phy_flags |= TG3_PHYFLG_1G_ON_VAUX_OK;
|
||||
if (nic_cfg & NIC_SRAM_LNK_FLAP_AVOID)
|
||||
tp->phy_flags |= TG3_PHYFLG_KEEP_LINK_ON_PWRDN;
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -9242,6 +9476,12 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
|
|||
TG3_CPMU_DBTMR2_TXIDXEQ_2047US);
|
||||
}
|
||||
|
||||
if ((tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) &&
|
||||
!(tp->phy_flags & TG3_PHYFLG_USER_CONFIGURED)) {
|
||||
tg3_phy_pull_config(tp);
|
||||
tp->phy_flags |= TG3_PHYFLG_USER_CONFIGURED;
|
||||
}
|
||||
|
||||
if (reset_phy)
|
||||
tg3_phy_reset(tp);
|
||||
|
||||
|
@ -11061,7 +11301,9 @@ static int tg3_open(struct net_device *dev)
|
|||
|
||||
tg3_full_unlock(tp);
|
||||
|
||||
err = tg3_start(tp, true, true, true);
|
||||
err = tg3_start(tp,
|
||||
!(tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN),
|
||||
true, true);
|
||||
if (err) {
|
||||
tg3_frob_aux_power(tp, false);
|
||||
pci_set_power_state(tp->pdev, PCI_D3hot);
|
||||
|
@ -11567,6 +11809,10 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|||
tp->link_config.duplex = cmd->duplex;
|
||||
}
|
||||
|
||||
tp->phy_flags |= TG3_PHYFLG_USER_CONFIGURED;
|
||||
|
||||
tg3_warn_mgmt_link_flap(tp);
|
||||
|
||||
if (netif_running(dev))
|
||||
tg3_setup_phy(tp, 1);
|
||||
|
||||
|
@ -11645,6 +11891,8 @@ static int tg3_nway_reset(struct net_device *dev)
|
|||
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
|
||||
return -EINVAL;
|
||||
|
||||
tg3_warn_mgmt_link_flap(tp);
|
||||
|
||||
if (tg3_flag(tp, USE_PHYLIB)) {
|
||||
if (!(tp->phy_flags & TG3_PHYFLG_IS_CONNECTED))
|
||||
return -EAGAIN;
|
||||
|
@ -11722,7 +11970,7 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e
|
|||
|
||||
if (netif_running(dev)) {
|
||||
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
||||
err = tg3_restart_hw(tp, 1);
|
||||
err = tg3_restart_hw(tp, 0);
|
||||
if (!err)
|
||||
tg3_netif_start(tp);
|
||||
}
|
||||
|
@ -11757,6 +12005,9 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
|
|||
struct tg3 *tp = netdev_priv(dev);
|
||||
int err = 0;
|
||||
|
||||
if (tp->link_config.autoneg == AUTONEG_ENABLE)
|
||||
tg3_warn_mgmt_link_flap(tp);
|
||||
|
||||
if (tg3_flag(tp, USE_PHYLIB)) {
|
||||
u32 newadv;
|
||||
struct phy_device *phydev;
|
||||
|
@ -11843,7 +12094,7 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
|
|||
|
||||
if (netif_running(dev)) {
|
||||
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
|
||||
err = tg3_restart_hw(tp, 1);
|
||||
err = tg3_restart_hw(tp, 0);
|
||||
if (!err)
|
||||
tg3_netif_start(tp);
|
||||
}
|
||||
|
@ -11851,6 +12102,8 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam
|
|||
tg3_full_unlock(tp);
|
||||
}
|
||||
|
||||
tp->phy_flags |= TG3_PHYFLG_USER_CONFIGURED;
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
|
@ -13988,6 +14241,12 @@ static void tg3_get_5720_nvram_info(struct tg3 *tp)
|
|||
case FLASH_5762_EEPROM_LD:
|
||||
nvmpinstrp = FLASH_5720_EEPROM_LD;
|
||||
break;
|
||||
case FLASH_5720VENDOR_M_ST_M45PE20:
|
||||
/* This pinstrap supports multiple sizes, so force it
|
||||
* to read the actual size from location 0xf0.
|
||||
*/
|
||||
nvmpinstrp = FLASH_5720VENDOR_ST_45USPT;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -14440,14 +14699,18 @@ static void tg3_get_eeprom_hw_cfg(struct tg3 *tp)
|
|||
(cfg2 & NIC_SRAM_DATA_CFG_2_APD_EN))
|
||||
tp->phy_flags |= TG3_PHYFLG_ENABLE_APD;
|
||||
|
||||
if (tg3_flag(tp, PCI_EXPRESS) &&
|
||||
tg3_asic_rev(tp) != ASIC_REV_5785 &&
|
||||
!tg3_flag(tp, 57765_PLUS)) {
|
||||
if (tg3_flag(tp, PCI_EXPRESS)) {
|
||||
u32 cfg3;
|
||||
|
||||
tg3_read_mem(tp, NIC_SRAM_DATA_CFG_3, &cfg3);
|
||||
if (cfg3 & NIC_SRAM_ASPM_DEBOUNCE)
|
||||
if (tg3_asic_rev(tp) != ASIC_REV_5785 &&
|
||||
!tg3_flag(tp, 57765_PLUS) &&
|
||||
(cfg3 & NIC_SRAM_ASPM_DEBOUNCE))
|
||||
tg3_flag_set(tp, ASPM_WORKAROUND);
|
||||
if (cfg3 & NIC_SRAM_LNK_FLAP_AVOID)
|
||||
tp->phy_flags |= TG3_PHYFLG_KEEP_LINK_ON_PWRDN;
|
||||
if (cfg3 & NIC_SRAM_1G_ON_VAUX_OK)
|
||||
tp->phy_flags |= TG3_PHYFLG_1G_ON_VAUX_OK;
|
||||
}
|
||||
|
||||
if (cfg4 & NIC_SRAM_RGMII_INBAND_DISABLE)
|
||||
|
@ -14601,6 +14864,12 @@ static int tg3_phy_probe(struct tg3 *tp)
|
|||
}
|
||||
}
|
||||
|
||||
if (!tg3_flag(tp, ENABLE_ASF) &&
|
||||
!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
|
||||
!(tp->phy_flags & TG3_PHYFLG_10_100_ONLY))
|
||||
tp->phy_flags &= ~(TG3_PHYFLG_1G_ON_VAUX_OK |
|
||||
TG3_PHYFLG_KEEP_LINK_ON_PWRDN);
|
||||
|
||||
if (tg3_flag(tp, USE_PHYLIB))
|
||||
return tg3_phy_init(tp);
|
||||
|
||||
|
@ -14676,7 +14945,8 @@ static int tg3_phy_probe(struct tg3 *tp)
|
|||
|
||||
tg3_phy_init_link_config(tp);
|
||||
|
||||
if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
|
||||
if (!(tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN) &&
|
||||
!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
|
||||
!tg3_flag(tp, ENABLE_APE) &&
|
||||
!tg3_flag(tp, ENABLE_ASF)) {
|
||||
u32 bmsr, dummy;
|
||||
|
@ -17243,7 +17513,8 @@ static int tg3_resume(struct device *device)
|
|||
tg3_full_lock(tp, 0);
|
||||
|
||||
tg3_flag_set(tp, INIT_COMPLETE);
|
||||
err = tg3_restart_hw(tp, 1);
|
||||
err = tg3_restart_hw(tp,
|
||||
!(tp->phy_flags & TG3_PHYFLG_KEEP_LINK_ON_PWRDN));
|
||||
if (err)
|
||||
goto out;
|
||||
|
||||
|
|
|
@ -2198,6 +2198,8 @@
|
|||
|
||||
#define NIC_SRAM_DATA_CFG_3 0x00000d3c
|
||||
#define NIC_SRAM_ASPM_DEBOUNCE 0x00000002
|
||||
#define NIC_SRAM_LNK_FLAP_AVOID 0x00400000
|
||||
#define NIC_SRAM_1G_ON_VAUX_OK 0x00800000
|
||||
|
||||
#define NIC_SRAM_DATA_CFG_4 0x00000d60
|
||||
#define NIC_SRAM_GMII_MODE 0x00000002
|
||||
|
@ -2371,6 +2373,13 @@
|
|||
#define MII_TG3_FET_SHDW_AUXSTAT2 0x1b
|
||||
#define MII_TG3_FET_SHDW_AUXSTAT2_APD 0x0020
|
||||
|
||||
/* Serdes PHY Register Definitions */
|
||||
#define SERDES_TG3_1000X_STATUS 0x14
|
||||
#define SERDES_TG3_SGMII_MODE 0x0001
|
||||
#define SERDES_TG3_LINK_UP 0x0002
|
||||
#define SERDES_TG3_FULL_DUPLEX 0x0004
|
||||
#define SERDES_TG3_SPEED_100 0x0008
|
||||
#define SERDES_TG3_SPEED_1000 0x0010
|
||||
|
||||
/* APE registers. Accessible through BAR1 */
|
||||
#define TG3_APE_GPIO_MSG 0x0008
|
||||
|
@ -3281,6 +3290,7 @@ struct tg3 {
|
|||
#define TG3_PHYFLG_IS_LOW_POWER 0x00000001
|
||||
#define TG3_PHYFLG_IS_CONNECTED 0x00000002
|
||||
#define TG3_PHYFLG_USE_MI_INTERRUPT 0x00000004
|
||||
#define TG3_PHYFLG_USER_CONFIGURED 0x00000008
|
||||
#define TG3_PHYFLG_PHY_SERDES 0x00000010
|
||||
#define TG3_PHYFLG_MII_SERDES 0x00000020
|
||||
#define TG3_PHYFLG_ANY_SERDES (TG3_PHYFLG_PHY_SERDES | \
|
||||
|
@ -3298,6 +3308,8 @@ struct tg3 {
|
|||
#define TG3_PHYFLG_SERDES_PREEMPHASIS 0x00010000
|
||||
#define TG3_PHYFLG_PARALLEL_DETECT 0x00020000
|
||||
#define TG3_PHYFLG_EEE_CAP 0x00040000
|
||||
#define TG3_PHYFLG_1G_ON_VAUX_OK 0x00080000
|
||||
#define TG3_PHYFLG_KEEP_LINK_ON_PWRDN 0x00100000
|
||||
#define TG3_PHYFLG_MDIX_STATE 0x00200000
|
||||
|
||||
u32 led_ctrl;
|
||||
|
|
Loading…
Reference in New Issue
Block a user