AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

phy: renesas: rcar-gen3-usb2: follow the hardware manual procedure

Browse Source 
This patch modifies rcar_gen3_init_otg() procedure to follow Figure
73.4 of "R-Car Series, 3rd Generation User's Manual: Hardware Rev.1.00".

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Yoshihiro Shimoda 2018-11-30 16:00:57 +09:00 committed by Kishon Vijay Abraham I
parent 44d30d6228
commit 72c0339c11
1 changed files with 11 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
drivers/phy/renesas/phy-rcar-gen3-usb2.c
View File

@ -307,16 +307,21 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
void __iomem *usb2_base = ch->base;
u32 val;
/* Should not use functions of read-modify-write a register */
val = readl(usb2_base + USB2_LINECTRL1);
val = (val & ~USB2_LINECTRL1_DP_RPD) | USB2_LINECTRL1_DPRPD_EN |
USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD;
writel(val, usb2_base + USB2_LINECTRL1);
val = readl(usb2_base + USB2_VBCTRL);
writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
rcar_gen3_control_otg_irq(ch, 1);
val = readl(usb2_base + USB2_ADPCTRL);
writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
val = readl(usb2_base + USB2_LINECTRL1);
rcar_gen3_set_linectrl(ch, 0, 0);
writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN,
usb2_base + USB2_LINECTRL1);
msleep(20);
writel(0xffffffff, usb2_base + USB2_OBINTSTA);
writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
rcar_gen3_device_recognition(ch);
}