powerpc/perf: Remove sched_task function defined for thread-imc

Call trace observed while running perf-fuzzer:

  CPU: 43 PID: 9088 Comm: perf_fuzzer Not tainted 4.13.0-32-generic #35~lp1746225
  task: c000003f776ac900 task.stack: c000003f77728000
  NIP: c000000000299b70 LR: c0000000002a4534 CTR: c00000000029bb80
  REGS: c000003f7772b760 TRAP: 0700   Not tainted  (4.13.0-32-generic)
  MSR: 900000000282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>
    CR: 24008822  XER: 00000000
  CFAR: c000000000299a70 SOFTE: 0
  GPR00: c0000000002a4534 c000003f7772b9e0 c000000001606200 c000003fef858908
  GPR04: c000003f776ac900 0000000000000001 ffffffffffffffff 0000003fee730000
  GPR08: 0000000000000000 0000000000000000 c0000000011220d8 0000000000000002
  GPR12: c00000000029bb80 c000000007a3d900 0000000000000000 0000000000000000
  GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR20: 0000000000000000 0000000000000000 c000003f776ad090 c000000000c71354
  GPR24: c000003fef716780 0000003fee730000 c000003fe69d4200 c000003f776ad330
  GPR28: c0000000011220d8 0000000000000001 c0000000014c6108 c000003fef858900
  NIP [c000000000299b70] perf_pmu_sched_task+0x170/0x180
  LR [c0000000002a4534] __perf_event_task_sched_in+0xc4/0x230
  Call Trace:
    perf_iterate_sb+0x158/0x2a0 (unreliable)
    __perf_event_task_sched_in+0xc4/0x230
    finish_task_switch+0x21c/0x310
    __schedule+0x304/0xb80
    schedule+0x40/0xc0
    do_wait+0x254/0x2e0
    kernel_wait4+0xa0/0x1a0
    SyS_wait4+0x64/0xc0
    system_call+0x58/0x6c
  Instruction dump:
  3beafea0 7faa4800 409eff18 e8010060 eb610028 ebc10040 7c0803a6 38210050
  eb81ffe0 eba1ffe8 ebe1fff8 4e800020 <0fe00000> 4bffffbc 60000000 60420000
  ---[ end trace 8c46856d314c1811 ]---

The context switch call-backs for thread-imc are defined in sched_task function.
So when thread-imc events are grouped with software pmu events,
perf_pmu_sched_task hits the WARN_ON_ONCE condition, since software PMUs are
assumed not to have a sched_task defined.

Patch to move the thread_imc enable/disable opal call back from sched_task to
event_[add/del] function

Fixes: f74c89bd80 ("powerpc/perf: Add thread IMC PMU support")
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This commit is contained in:
Anju T Sudhakar 2018-05-18 13:05:25 +05:30 committed by Michael Ellerman
parent 4231aba000
commit 7ccc4fe5ff

View File

@ -867,59 +867,6 @@ static int thread_imc_cpu_init(void)
ppc_thread_imc_cpu_offline);
}
void thread_imc_pmu_sched_task(struct perf_event_context *ctx,
bool sched_in)
{
int core_id;
struct imc_pmu_ref *ref;
if (!is_core_imc_mem_inited(smp_processor_id()))
return;
core_id = smp_processor_id() / threads_per_core;
/*
* imc pmus are enabled only when it is used.
* See if this is triggered for the first time.
* If yes, take the mutex lock and enable the counters.
* If not, just increment the count in ref count struct.
*/
ref = &core_imc_refc[core_id];
if (!ref)
return;
if (sched_in) {
mutex_lock(&ref->lock);
if (ref->refc == 0) {
if (opal_imc_counters_start(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(smp_processor_id()))) {
mutex_unlock(&ref->lock);
pr_err("thread-imc: Unable to start the counter\
for core %d\n", core_id);
return;
}
}
++ref->refc;
mutex_unlock(&ref->lock);
} else {
mutex_lock(&ref->lock);
ref->refc--;
if (ref->refc == 0) {
if (opal_imc_counters_stop(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(smp_processor_id()))) {
mutex_unlock(&ref->lock);
pr_err("thread-imc: Unable to stop the counters\
for core %d\n", core_id);
return;
}
} else if (ref->refc < 0) {
ref->refc = 0;
}
mutex_unlock(&ref->lock);
}
return;
}
static int thread_imc_event_init(struct perf_event *event)
{
u32 config = event->attr.config;
@ -1046,22 +993,70 @@ static int imc_event_add(struct perf_event *event, int flags)
static int thread_imc_event_add(struct perf_event *event, int flags)
{
int core_id;
struct imc_pmu_ref *ref;
if (flags & PERF_EF_START)
imc_event_start(event, flags);
/* Enable the sched_task to start the engine */
perf_sched_cb_inc(event->ctx->pmu);
if (!is_core_imc_mem_inited(smp_processor_id()))
return -EINVAL;
core_id = smp_processor_id() / threads_per_core;
/*
* imc pmus are enabled only when it is used.
* See if this is triggered for the first time.
* If yes, take the mutex lock and enable the counters.
* If not, just increment the count in ref count struct.
*/
ref = &core_imc_refc[core_id];
if (!ref)
return -EINVAL;
mutex_lock(&ref->lock);
if (ref->refc == 0) {
if (opal_imc_counters_start(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(smp_processor_id()))) {
mutex_unlock(&ref->lock);
pr_err("thread-imc: Unable to start the counter\
for core %d\n", core_id);
return -EINVAL;
}
}
++ref->refc;
mutex_unlock(&ref->lock);
return 0;
}
static void thread_imc_event_del(struct perf_event *event, int flags)
{
int core_id;
struct imc_pmu_ref *ref;
/*
* Take a snapshot and calculate the delta and update
* the event counter values.
*/
imc_event_update(event);
perf_sched_cb_dec(event->ctx->pmu);
core_id = smp_processor_id() / threads_per_core;
ref = &core_imc_refc[core_id];
mutex_lock(&ref->lock);
ref->refc--;
if (ref->refc == 0) {
if (opal_imc_counters_stop(OPAL_IMC_COUNTERS_CORE,
get_hard_smp_processor_id(smp_processor_id()))) {
mutex_unlock(&ref->lock);
pr_err("thread-imc: Unable to stop the counters\
for core %d\n", core_id);
return;
}
} else if (ref->refc < 0) {
ref->refc = 0;
}
mutex_unlock(&ref->lock);
}
/* update_pmu_ops : Populate the appropriate operations for "pmu" */
@ -1087,7 +1082,6 @@ static int update_pmu_ops(struct imc_pmu *pmu)
break;
case IMC_DOMAIN_THREAD:
pmu->pmu.event_init = thread_imc_event_init;
pmu->pmu.sched_task = thread_imc_pmu_sched_task;
pmu->pmu.add = thread_imc_event_add;
pmu->pmu.del = thread_imc_event_del;
pmu->pmu.start_txn = thread_imc_pmu_start_txn;