forked from luck/tmp_suning_uos_patched
serial: add support for ITE 887x chips
Add support for the it887x-chips (PCI) manufactured by ITE. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Niels de Vos
Linus Torvalds
parent
20620d688a
commit
84f8c6fc0e
|
|
@ -580,6 +580,138 @@ static int pci_netmos_init(struct pci_dev *dev)
|
|||
return num_serial;
|
||||
}
|
||||
|
||||
/*
|
||||
* ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
|
||||
*
|
||||
* These chips are available with optionally one parallel port and up to
|
||||
* two serial ports. Unfortunately they all have the same product id.
|
||||
*
|
||||
* Basic configuration is done over a region of 32 I/O ports. The base
|
||||
* ioport is called INTA or INTC, depending on docs/other drivers.
|
||||
*
|
||||
* The region of the 32 I/O ports is configured in POSIO0R...
|
||||
*/
|
||||
|
||||
/* registers */
|
||||
#define ITE_887x_MISCR 0x9c
|
||||
#define ITE_887x_INTCBAR 0x78
|
||||
#define ITE_887x_UARTBAR 0x7c
|
||||
#define ITE_887x_PS0BAR 0x10
|
||||
#define ITE_887x_POSIO0 0x60
|
||||
|
||||
/* I/O space size */
|
||||
#define ITE_887x_IOSIZE 32
|
||||
/* I/O space size (bits 26-24; 8 bytes = 011b) */
|
||||
#define ITE_887x_POSIO_IOSIZE_8 (3 << 24)
|
||||
/* I/O space size (bits 26-24; 32 bytes = 101b) */
|
||||
#define ITE_887x_POSIO_IOSIZE_32 (5 << 24)
|
||||
/* Decoding speed (1 = slow, 2 = medium, 3 = fast) */
|
||||
#define ITE_887x_POSIO_SPEED (3 << 29)
|
||||
/* enable IO_Space bit */
|
||||
#define ITE_887x_POSIO_ENABLE (1 << 31)
|
||||
|
||||
static int __devinit pci_ite887x_init(struct pci_dev *dev)
|
||||
{
|
||||
/* inta_addr are the configuration addresses of the ITE */
|
||||
static const short inta_addr[] = { 0x2a0, 0x2c0, 0x220, 0x240, 0x1e0,
|
||||
0x200, 0x280, 0 };
|
||||
int ret, i, type;
|
||||
struct resource *iobase = NULL;
|
||||
u32 miscr, uartbar, ioport;
|
||||
|
||||
/* search for the base-ioport */
|
||||
i = 0;
|
||||
while (inta_addr[i] && iobase == NULL) {
|
||||
iobase = request_region(inta_addr[i], ITE_887x_IOSIZE,
|
||||
"ite887x");
|
||||
if (iobase != NULL) {
|
||||
/* write POSIO0R - speed | size | ioport */
|
||||
pci_write_config_dword(dev, ITE_887x_POSIO0,
|
||||
ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
|
||||
ITE_887x_POSIO_IOSIZE_32 | inta_addr[i]);
|
||||
/* write INTCBAR - ioport */
|
||||
pci_write_config_dword(dev, ITE_887x_INTCBAR, inta_addr[i]);
|
||||
ret = inb(inta_addr[i]);
|
||||
if (ret != 0xff) {
|
||||
/* ioport connected */
|
||||
break;
|
||||
}
|
||||
release_region(iobase->start, ITE_887x_IOSIZE);
|
||||
iobase = NULL;
|
||||
}
|
||||
i++;
|
||||
}
|
||||
|
||||
if (!inta_addr[i]) {
|
||||
printk(KERN_ERR "ite887x: could not find iobase\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/* start of undocumented type checking (see parport_pc.c) */
|
||||
type = inb(iobase->start + 0x18) & 0x0f;
|
||||
|
||||
switch (type) {
|
||||
case 0x2: /* ITE8871 (1P) */
|
||||
case 0xa: /* ITE8875 (1P) */
|
||||
ret = 0;
|
||||
break;
|
||||
case 0xe: /* ITE8872 (2S1P) */
|
||||
ret = 2;
|
||||
break;
|
||||
case 0x6: /* ITE8873 (1S) */
|
||||
ret = 1;
|
||||
break;
|
||||
case 0x8: /* ITE8874 (2S) */
|
||||
ret = 2;
|
||||
break;
|
||||
default:
|
||||
moan_device("Unknown ITE887x", dev);
|
||||
ret = -ENODEV;
|
||||
}
|
||||
|
||||
/* configure all serial ports */
|
||||
for (i = 0; i < ret; i++) {
|
||||
/* read the I/O port from the device */
|
||||
pci_read_config_dword(dev, ITE_887x_PS0BAR + (0x4 * (i + 1)),
|
||||
&ioport);
|
||||
ioport &= 0x0000FF00; /* the actual base address */
|
||||
pci_write_config_dword(dev, ITE_887x_POSIO0 + (0x4 * (i + 1)),
|
||||
ITE_887x_POSIO_ENABLE | ITE_887x_POSIO_SPEED |
|
||||
ITE_887x_POSIO_IOSIZE_8 | ioport);
|
||||
|
||||
/* write the ioport to the UARTBAR */
|
||||
pci_read_config_dword(dev, ITE_887x_UARTBAR, &uartbar);
|
||||
uartbar &= ~(0xffff << (16 * i)); /* clear half the reg */
|
||||
uartbar |= (ioport << (16 * i)); /* set the ioport */
|
||||
pci_write_config_dword(dev, ITE_887x_UARTBAR, uartbar);
|
||||
|
||||
/* get current config */
|
||||
pci_read_config_dword(dev, ITE_887x_MISCR, &miscr);
|
||||
/* disable interrupts (UARTx_Routing[3:0]) */
|
||||
miscr &= ~(0xf << (12 - 4 * i));
|
||||
/* activate the UART (UARTx_En) */
|
||||
miscr |= 1 << (23 - i);
|
||||
/* write new config with activated UART */
|
||||
pci_write_config_dword(dev, ITE_887x_MISCR, miscr);
|
||||
}
|
||||
|
||||
if (ret <= 0) {
|
||||
/* the device has no UARTs if we get here */
|
||||
release_region(iobase->start, ITE_887x_IOSIZE);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void __devexit pci_ite887x_exit(struct pci_dev *dev)
|
||||
{
|
||||
u32 ioport;
|
||||
/* the ioport is bit 0-15 in POSIO0R */
|
||||
pci_read_config_dword(dev, ITE_887x_POSIO0, &ioport);
|
||||
ioport &= 0xffff;
|
||||
release_region(ioport, ITE_887x_IOSIZE);
|
||||
}
|
||||
|
||||
static int
|
||||
pci_default_setup(struct serial_private *priv, struct pciserial_board *board,
|
||||
struct uart_port *port, int idx)
|
||||
|
|
@ -652,6 +784,18 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
|
|||
.init = pci_inteli960ni_init,
|
||||
.setup = pci_default_setup,
|
||||
},
|
||||
/*
|
||||
* ITE
|
||||
*/
|
||||
{
|
||||
.vendor = PCI_VENDOR_ID_ITE,
|
||||
.device = PCI_DEVICE_ID_ITE_8872,
|
||||
.subvendor = PCI_ANY_ID,
|
||||
.subdevice = PCI_ANY_ID,
|
||||
.init = pci_ite887x_init,
|
||||
.setup = pci_default_setup,
|
||||
.exit = __devexit_p(pci_ite887x_exit),
|
||||
},
|
||||
/*
|
||||
* Panacom
|
||||
*/
|
||||
|
|
@ -933,6 +1077,7 @@ enum pci_board_num_t {
|
|||
|
||||
pbn_b1_2_1250000,
|
||||
|
||||
pbn_b1_bt_1_115200,
|
||||
pbn_b1_bt_2_921600,
|
||||
|
||||
pbn_b1_1_1382400,
|
||||
|
|
@ -1211,6 +1356,13 @@ static struct pciserial_board pci_boards[] __devinitdata = {
|
|||
.uart_offset = 8,
|
||||
},
|
||||
|
||||
[pbn_b1_bt_1_115200] = {
|
||||
.flags = FL_BASE1|FL_BASE_BARS,
|
||||
.num_ports = 1,
|
||||
.base_baud = 115200,
|
||||
.uart_offset = 8,
|
||||
},
|
||||
|
||||
[pbn_b1_bt_2_921600] = {
|
||||
.flags = FL_BASE1|FL_BASE_BARS,
|
||||
.num_ports = 2,
|
||||
|
|
@ -2364,6 +2516,13 @@ static struct pci_device_id serial_pci_tbl[] = {
|
|||
{ PCI_VENDOR_ID_TOPIC, PCI_DEVICE_ID_TOPIC_TP560,
|
||||
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
|
||||
pbn_b0_1_115200 },
|
||||
/*
|
||||
* ITE
|
||||
*/
|
||||
{ PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8872,
|
||||
PCI_ANY_ID, PCI_ANY_ID,
|
||||
0, 0,
|
||||
pbn_b1_bt_1_115200 },
|
||||
|
||||
/*
|
||||
* IntaShield IS-200
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user