forked from luck/tmp_suning_uos_patched
MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files
Most of these files are have more comments than real code; merge them all into single board-<name>.c files. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2869/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Manuel Lauss
Ralf Baechle
parent
f869d42e58
commit
8e026910fc
3
arch/mips/alchemy/Makefile
Normal file
3
arch/mips/alchemy/Makefile
Normal file
|
|
@ -0,0 +1,3 @@
|
|||
obj-$(CONFIG_MIPS_GPR) += board-gpr.o
|
||||
obj-$(CONFIG_MIPS_MTX1) += board-mtx1.o
|
||||
obj-$(CONFIG_MIPS_XXS1500) += board-xxs1500.o
|
||||
|
|
@ -75,21 +75,21 @@ cflags-$(CONFIG_MIPS_DB1300) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
|
|||
load-$(CONFIG_MIPS_DB1300) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# 4G-Systems eval board
|
||||
# 4G-Systems MTX-1 "MeshCube" wireless router
|
||||
#
|
||||
platform-$(CONFIG_MIPS_MTX1) += alchemy/mtx-1/
|
||||
platform-$(CONFIG_MIPS_MTX1) += alchemy/
|
||||
load-$(CONFIG_MIPS_MTX1) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# MyCable eval board
|
||||
#
|
||||
platform-$(CONFIG_MIPS_XXS1500) += alchemy/xxs1500/
|
||||
platform-$(CONFIG_MIPS_XXS1500) += alchemy/
|
||||
load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
|
||||
|
||||
#
|
||||
# Trapeze ITS GRP board
|
||||
#
|
||||
platform-$(CONFIG_MIPS_GPR) += alchemy/gpr/
|
||||
platform-$(CONFIG_MIPS_GPR) += alchemy/
|
||||
load-$(CONFIG_MIPS_GPR) += 0xffffffff80100000
|
||||
|
||||
# boards can specify their own <gpio.h> in one of their include dirs.
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* GPR board platform device registration
|
||||
* GPR board platform device registration (Au1550)
|
||||
*
|
||||
* Copyright (C) 2010 Wolfgang Grandegger <wg@denx.de>
|
||||
*
|
||||
|
|
@ -18,16 +18,89 @@
|
|||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pm.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/i2c-gpio.h>
|
||||
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
#include <prom.h>
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "GPR";
|
||||
}
|
||||
|
||||
void __init prom_init(void)
|
||||
{
|
||||
unsigned char *memsize_str;
|
||||
unsigned long memsize;
|
||||
|
||||
prom_argc = fw_arg0;
|
||||
prom_argv = (char **)fw_arg1;
|
||||
prom_envp = (char **)fw_arg2;
|
||||
|
||||
prom_init_cmdline();
|
||||
|
||||
memsize_str = prom_getenv("memsize");
|
||||
if (!memsize_str)
|
||||
memsize = 0x04000000;
|
||||
else
|
||||
strict_strtoul(memsize_str, 0, &memsize);
|
||||
add_memory_region(0, memsize, BOOT_MEM_RAM);
|
||||
}
|
||||
|
||||
void prom_putchar(unsigned char c)
|
||||
{
|
||||
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
|
||||
}
|
||||
|
||||
static void gpr_reset(char *c)
|
||||
{
|
||||
/* switch System-LED to orange (red# and green# on) */
|
||||
alchemy_gpio_direction_output(4, 0);
|
||||
alchemy_gpio_direction_output(5, 0);
|
||||
|
||||
/* trigger watchdog to reset board in 200ms */
|
||||
printk(KERN_EMERG "Triggering watchdog soft reset...\n");
|
||||
raw_local_irq_disable();
|
||||
alchemy_gpio_direction_output(1, 0);
|
||||
udelay(1);
|
||||
alchemy_gpio_set_value(1, 1);
|
||||
while (1)
|
||||
cpu_wait();
|
||||
}
|
||||
|
||||
static void gpr_power_off(void)
|
||||
{
|
||||
while (1)
|
||||
cpu_wait();
|
||||
}
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
printk(KERN_INFO "Trapeze ITS GPR board\n");
|
||||
|
||||
pm_power_off = gpr_power_off;
|
||||
_machine_halt = gpr_power_off;
|
||||
_machine_restart = gpr_reset;
|
||||
|
||||
/* Enable UART1/3 */
|
||||
alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
|
||||
alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
|
||||
|
||||
/* Take away Reset of UMTS-card */
|
||||
alchemy_gpio_direction_output(215, 1);
|
||||
}
|
||||
|
||||
/*
|
||||
* Watchdog
|
||||
|
|
@ -152,7 +225,7 @@ static struct i2c_gpio_platform_data gpr_i2c_data = {
|
|||
.scl_is_open_drain = 1,
|
||||
.udelay = 2, /* ~100 kHz */
|
||||
.timeout = HZ,
|
||||
};
|
||||
};
|
||||
|
||||
static struct platform_device gpr_i2c_device = {
|
||||
.name = "i2c-gpio",
|
||||
|
|
@ -184,7 +257,7 @@ static int gpr_map_pci_irq(const struct pci_dev *d, u8 slot, u8 pin)
|
|||
else if ((slot == 0) && (pin == 2))
|
||||
return AU1550_PCI_INTB;
|
||||
|
||||
return -1;
|
||||
return 0xff;
|
||||
}
|
||||
|
||||
static struct alchemy_pci_platdata gpr_pci_pd = {
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* MTX-1 platform devices registration
|
||||
* MTX-1 platform devices registration (Au1500)
|
||||
*
|
||||
* Copyright (C) 2007-2009, Florian Fainelli <florian@openwrt.org>
|
||||
*
|
||||
|
|
@ -19,6 +19,8 @@
|
|||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/gpio.h>
|
||||
|
|
@ -27,8 +29,85 @@
|
|||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/physmap.h>
|
||||
#include <mtd/mtd-abi.h>
|
||||
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
#include <asm/mach-au1x00/au1xxx_eth.h>
|
||||
#include <prom.h>
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "MTX-1";
|
||||
}
|
||||
|
||||
void __init prom_init(void)
|
||||
{
|
||||
unsigned char *memsize_str;
|
||||
unsigned long memsize;
|
||||
|
||||
prom_argc = fw_arg0;
|
||||
prom_argv = (char **)fw_arg1;
|
||||
prom_envp = (char **)fw_arg2;
|
||||
|
||||
prom_init_cmdline();
|
||||
|
||||
memsize_str = prom_getenv("memsize");
|
||||
if (!memsize_str)
|
||||
memsize = 0x04000000;
|
||||
else
|
||||
strict_strtoul(memsize_str, 0, &memsize);
|
||||
add_memory_region(0, memsize, BOOT_MEM_RAM);
|
||||
}
|
||||
|
||||
void prom_putchar(unsigned char c)
|
||||
{
|
||||
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
|
||||
}
|
||||
|
||||
static void mtx1_reset(char *c)
|
||||
{
|
||||
/* Jump to the reset vector */
|
||||
__asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000));
|
||||
}
|
||||
|
||||
static void mtx1_power_off(void)
|
||||
{
|
||||
while (1)
|
||||
asm volatile (
|
||||
" .set mips32 \n"
|
||||
" wait \n"
|
||||
" .set mips0 \n");
|
||||
}
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
||||
/* Enable USB power switch */
|
||||
alchemy_gpio_direction_output(204, 0);
|
||||
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
|
||||
|
||||
/* Initialize sys_pinfunc */
|
||||
au_writel(SYS_PF_NI2, SYS_PINFUNC);
|
||||
|
||||
/* Initialize GPIO */
|
||||
au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
|
||||
alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */
|
||||
alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */
|
||||
alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */
|
||||
alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */
|
||||
|
||||
/* Enable LED and set it to green */
|
||||
alchemy_gpio_direction_output(211, 1); /* green on */
|
||||
alchemy_gpio_direction_output(212, 0); /* red off */
|
||||
|
||||
pm_power_off = mtx1_power_off;
|
||||
_machine_halt = mtx1_power_off;
|
||||
_machine_restart = mtx1_reset;
|
||||
|
||||
printk(KERN_INFO "4G Systems MTX-1 Board\n");
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
|
||||
static struct gpio_keys_button mtx1_gpio_button[] = {
|
||||
{
|
||||
|
|
@ -195,7 +274,6 @@ static struct platform_device mtx1_pci_host = {
|
|||
.resource = alchemy_pci_host_res,
|
||||
};
|
||||
|
||||
|
||||
static struct __initdata platform_device * mtx1_devs[] = {
|
||||
&mtx1_pci_host,
|
||||
&mtx1_gpio_leds,
|
||||
|
|
@ -206,13 +284,19 @@ static struct __initdata platform_device * mtx1_devs[] = {
|
|||
|
||||
static struct au1000_eth_platform_data mtx1_au1000_eth0_pdata = {
|
||||
.phy_search_highest_addr = 1,
|
||||
.phy1_search_mac0 = 1,
|
||||
.phy1_search_mac0 = 1,
|
||||
};
|
||||
|
||||
static int __init mtx1_register_devices(void)
|
||||
{
|
||||
int rc;
|
||||
|
||||
irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH);
|
||||
irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
|
||||
au1xxx_override_eth_cfg(0, &mtx1_au1000_eth0_pdata);
|
||||
|
||||
rc = gpio_request(mtx1_gpio_button[0].gpio,
|
||||
|
|
@ -226,5 +310,4 @@ static int __init mtx1_register_devices(void)
|
|||
out:
|
||||
return platform_add_devices(mtx1_devs, ARRAY_SIZE(mtx1_devs));
|
||||
}
|
||||
|
||||
arch_initcall(mtx1_register_devices);
|
||||
154
arch/mips/alchemy/board-xxs1500.c
Normal file
154
arch/mips/alchemy/board-xxs1500.c
Normal file
|
|
@ -0,0 +1,154 @@
|
|||
/*
|
||||
* BRIEF MODULE DESCRIPTION
|
||||
* MyCable XXS1500 board support
|
||||
*
|
||||
* Copyright 2003, 2008 MontaVista Software Inc.
|
||||
* Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/pm.h>
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
#include <prom.h>
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "XXS1500";
|
||||
}
|
||||
|
||||
void __init prom_init(void)
|
||||
{
|
||||
unsigned char *memsize_str;
|
||||
unsigned long memsize;
|
||||
|
||||
prom_argc = fw_arg0;
|
||||
prom_argv = (char **)fw_arg1;
|
||||
prom_envp = (char **)fw_arg2;
|
||||
|
||||
prom_init_cmdline();
|
||||
|
||||
memsize_str = prom_getenv("memsize");
|
||||
if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
|
||||
memsize = 0x04000000;
|
||||
|
||||
add_memory_region(0, memsize, BOOT_MEM_RAM);
|
||||
}
|
||||
|
||||
void prom_putchar(unsigned char c)
|
||||
{
|
||||
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
|
||||
}
|
||||
|
||||
static void xxs1500_reset(char *c)
|
||||
{
|
||||
/* Jump to the reset vector */
|
||||
__asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000));
|
||||
}
|
||||
|
||||
static void xxs1500_power_off(void)
|
||||
{
|
||||
while (1)
|
||||
asm volatile (
|
||||
" .set mips32 \n"
|
||||
" wait \n"
|
||||
" .set mips0 \n");
|
||||
}
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
u32 pin_func;
|
||||
|
||||
pm_power_off = xxs1500_power_off;
|
||||
_machine_halt = xxs1500_power_off;
|
||||
_machine_restart = xxs1500_reset;
|
||||
|
||||
alchemy_gpio1_input_enable();
|
||||
alchemy_gpio2_enable();
|
||||
|
||||
/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
|
||||
pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
|
||||
pin_func |= SYS_PF_UR3;
|
||||
au_writel(pin_func, SYS_PINFUNC);
|
||||
|
||||
/* Enable UART */
|
||||
alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
|
||||
/* Enable DTR (MCR bit 0) = USB power up */
|
||||
__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
|
||||
wmb();
|
||||
}
|
||||
|
||||
/******************************************************************************/
|
||||
|
||||
static struct resource xxs1500_pcmcia_res[] = {
|
||||
{
|
||||
.name = "pcmcia-io",
|
||||
.flags = IORESOURCE_MEM,
|
||||
.start = AU1000_PCMCIA_IO_PHYS_ADDR,
|
||||
.end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
|
||||
},
|
||||
{
|
||||
.name = "pcmcia-attr",
|
||||
.flags = IORESOURCE_MEM,
|
||||
.start = AU1000_PCMCIA_ATTR_PHYS_ADDR,
|
||||
.end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
|
||||
},
|
||||
{
|
||||
.name = "pcmcia-mem",
|
||||
.flags = IORESOURCE_MEM,
|
||||
.start = AU1000_PCMCIA_MEM_PHYS_ADDR,
|
||||
.end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device xxs1500_pcmcia_dev = {
|
||||
.name = "xxs1500_pcmcia",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(xxs1500_pcmcia_res),
|
||||
.resource = xxs1500_pcmcia_res,
|
||||
};
|
||||
|
||||
static struct platform_device *xxs1500_devs[] __initdata = {
|
||||
&xxs1500_pcmcia_dev,
|
||||
};
|
||||
|
||||
static int __init xxs1500_dev_init(void)
|
||||
{
|
||||
irq_set_irq_type(AU1500_GPIO204_INT, IRQ_TYPE_LEVEL_HIGH);
|
||||
irq_set_irq_type(AU1500_GPIO201_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO202_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO203_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO205_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO207_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
|
||||
irq_set_irq_type(AU1500_GPIO0_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO1_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO2_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO3_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO4_INT, IRQ_TYPE_LEVEL_LOW); /* CF irq */
|
||||
irq_set_irq_type(AU1500_GPIO5_INT, IRQ_TYPE_LEVEL_LOW);
|
||||
|
||||
return platform_add_devices(xxs1500_devs,
|
||||
ARRAY_SIZE(xxs1500_devs));
|
||||
}
|
||||
device_initcall(xxs1500_dev_init);
|
||||
|
|
@ -1,8 +0,0 @@
|
|||
#
|
||||
# Copyright 2003 MontaVista Software Inc.
|
||||
# Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
#
|
||||
# Makefile for Trapeze ITS GPR board.
|
||||
#
|
||||
|
||||
obj-y += board_setup.o init.o platform.o
|
||||
|
|
@ -1,75 +0,0 @@
|
|||
/*
|
||||
* Copyright 2010 Wolfgang Grandegger <wg@denx.de>
|
||||
*
|
||||
* Copyright 2000-2003, 2008 MontaVista Software Inc.
|
||||
* Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/pm.h>
|
||||
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
#include <prom.h>
|
||||
|
||||
static void gpr_reset(char *c)
|
||||
{
|
||||
/* switch System-LED to orange (red# and green# on) */
|
||||
alchemy_gpio_direction_output(4, 0);
|
||||
alchemy_gpio_direction_output(5, 0);
|
||||
|
||||
/* trigger watchdog to reset board in 200ms */
|
||||
printk(KERN_EMERG "Triggering watchdog soft reset...\n");
|
||||
raw_local_irq_disable();
|
||||
alchemy_gpio_direction_output(1, 0);
|
||||
udelay(1);
|
||||
alchemy_gpio_set_value(1, 1);
|
||||
while (1)
|
||||
cpu_wait();
|
||||
}
|
||||
|
||||
static void gpr_power_off(void)
|
||||
{
|
||||
while (1)
|
||||
cpu_wait();
|
||||
}
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
printk(KERN_INFO "Trapeze ITS GPR board\n");
|
||||
|
||||
pm_power_off = gpr_power_off;
|
||||
_machine_halt = gpr_power_off;
|
||||
_machine_restart = gpr_reset;
|
||||
|
||||
/* Enable UART1/3 */
|
||||
alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
|
||||
alchemy_uart_enable(AU1000_UART1_PHYS_ADDR);
|
||||
|
||||
/* Take away Reset of UMTS-card */
|
||||
alchemy_gpio_direction_output(215, 1);
|
||||
}
|
||||
|
|
@ -1,63 +0,0 @@
|
|||
/*
|
||||
* Copyright 2010 Wolfgang Grandegger <wg@denx.de>
|
||||
*
|
||||
* Copyright 2003, 2008 MontaVista Software Inc.
|
||||
* Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
#include <prom.h>
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "GPR";
|
||||
}
|
||||
|
||||
void __init prom_init(void)
|
||||
{
|
||||
unsigned char *memsize_str;
|
||||
unsigned long memsize;
|
||||
|
||||
prom_argc = fw_arg0;
|
||||
prom_argv = (char **)fw_arg1;
|
||||
prom_envp = (char **)fw_arg2;
|
||||
|
||||
prom_init_cmdline();
|
||||
|
||||
memsize_str = prom_getenv("memsize");
|
||||
if (!memsize_str)
|
||||
memsize = 0x04000000;
|
||||
else
|
||||
strict_strtoul(memsize_str, 0, &memsize);
|
||||
add_memory_region(0, memsize, BOOT_MEM_RAM);
|
||||
}
|
||||
|
||||
void prom_putchar(unsigned char c)
|
||||
{
|
||||
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
|
||||
}
|
||||
|
|
@ -1,9 +0,0 @@
|
|||
#
|
||||
# Copyright 2003 MontaVista Software Inc.
|
||||
# Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
# Bruno Randolf <bruno.randolf@4g-systems.biz>
|
||||
#
|
||||
# Makefile for 4G Systems MTX-1 board.
|
||||
#
|
||||
|
||||
obj-y += init.o board_setup.o platform.o
|
||||
|
|
@ -1,94 +0,0 @@
|
|||
/*
|
||||
*
|
||||
* BRIEF MODULE DESCRIPTION
|
||||
* 4G Systems MTX-1 board setup.
|
||||
*
|
||||
* Copyright 2003, 2008 MontaVista Software Inc.
|
||||
* Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
* Bruno Randolf <bruno.randolf@4g-systems.biz>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/pm.h>
|
||||
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
#include <prom.h>
|
||||
|
||||
static void mtx1_reset(char *c)
|
||||
{
|
||||
/* Jump to the reset vector */
|
||||
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
|
||||
}
|
||||
|
||||
static void mtx1_power_off(void)
|
||||
{
|
||||
while (1)
|
||||
asm volatile (
|
||||
" .set mips32 \n"
|
||||
" wait \n"
|
||||
" .set mips0 \n");
|
||||
}
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
|
||||
/* Enable USB power switch */
|
||||
alchemy_gpio_direction_output(204, 0);
|
||||
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
|
||||
|
||||
/* Initialize sys_pinfunc */
|
||||
au_writel(SYS_PF_NI2, SYS_PINFUNC);
|
||||
|
||||
/* Initialize GPIO */
|
||||
au_writel(~0, KSEG1ADDR(AU1000_SYS_PHYS_ADDR) + SYS_TRIOUTCLR);
|
||||
alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */
|
||||
alchemy_gpio_direction_output(3, 1); /* Disable PCI CLKRUN# */
|
||||
alchemy_gpio_direction_output(1, 1); /* Enable EXT_IO3 */
|
||||
alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */
|
||||
|
||||
/* Enable LED and set it to green */
|
||||
alchemy_gpio_direction_output(211, 1); /* green on */
|
||||
alchemy_gpio_direction_output(212, 0); /* red off */
|
||||
|
||||
pm_power_off = mtx1_power_off;
|
||||
_machine_halt = mtx1_power_off;
|
||||
_machine_restart = mtx1_reset;
|
||||
|
||||
printk(KERN_INFO "4G Systems MTX-1 Board\n");
|
||||
}
|
||||
|
||||
static int __init mtx1_init_irq(void)
|
||||
{
|
||||
irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
|
||||
irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
|
||||
|
||||
return 0;
|
||||
}
|
||||
arch_initcall(mtx1_init_irq);
|
||||
|
|
@ -1,66 +0,0 @@
|
|||
/*
|
||||
*
|
||||
* BRIEF MODULE DESCRIPTION
|
||||
* 4G Systems MTX-1 board setup
|
||||
*
|
||||
* Copyright 2003, 2008 MontaVista Software Inc.
|
||||
* Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
* Bruno Randolf <bruno.randolf@4g-systems.biz>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
#include <prom.h>
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "MTX-1";
|
||||
}
|
||||
|
||||
void __init prom_init(void)
|
||||
{
|
||||
unsigned char *memsize_str;
|
||||
unsigned long memsize;
|
||||
|
||||
prom_argc = fw_arg0;
|
||||
prom_argv = (char **)fw_arg1;
|
||||
prom_envp = (char **)fw_arg2;
|
||||
|
||||
prom_init_cmdline();
|
||||
|
||||
memsize_str = prom_getenv("memsize");
|
||||
if (!memsize_str)
|
||||
memsize = 0x04000000;
|
||||
else
|
||||
strict_strtoul(memsize_str, 0, &memsize);
|
||||
add_memory_region(0, memsize, BOOT_MEM_RAM);
|
||||
}
|
||||
|
||||
void prom_putchar(unsigned char c)
|
||||
{
|
||||
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
|
||||
}
|
||||
|
|
@ -1,8 +0,0 @@
|
|||
#
|
||||
# Copyright 2003 MontaVista Software Inc.
|
||||
# Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
#
|
||||
# Makefile for MyCable XXS1500 board.
|
||||
#
|
||||
|
||||
obj-y += init.o board_setup.o platform.o
|
||||
|
|
@ -1,93 +0,0 @@
|
|||
/*
|
||||
* Copyright 2000-2003, 2008 MontaVista Software Inc.
|
||||
* Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/pm.h>
|
||||
|
||||
#include <asm/reboot.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
#include <prom.h>
|
||||
|
||||
static void xxs1500_reset(char *c)
|
||||
{
|
||||
/* Jump to the reset vector */
|
||||
__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
|
||||
}
|
||||
|
||||
static void xxs1500_power_off(void)
|
||||
{
|
||||
while (1)
|
||||
asm volatile (
|
||||
" .set mips32 \n"
|
||||
" wait \n"
|
||||
" .set mips0 \n");
|
||||
}
|
||||
|
||||
void __init board_setup(void)
|
||||
{
|
||||
u32 pin_func;
|
||||
|
||||
pm_power_off = xxs1500_power_off;
|
||||
_machine_halt = xxs1500_power_off;
|
||||
_machine_restart = xxs1500_reset;
|
||||
|
||||
alchemy_gpio1_input_enable();
|
||||
alchemy_gpio2_enable();
|
||||
|
||||
/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
|
||||
pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
|
||||
pin_func |= SYS_PF_UR3;
|
||||
au_writel(pin_func, SYS_PINFUNC);
|
||||
|
||||
/* Enable UART */
|
||||
alchemy_uart_enable(AU1000_UART3_PHYS_ADDR);
|
||||
/* Enable DTR (MCR bit 0) = USB power up */
|
||||
__raw_writel(1, (void __iomem *)KSEG1ADDR(AU1000_UART3_PHYS_ADDR + 0x18));
|
||||
wmb();
|
||||
}
|
||||
|
||||
static int __init xxs1500_init_irq(void)
|
||||
{
|
||||
irq_set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH);
|
||||
irq_set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW);
|
||||
|
||||
irq_set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW);
|
||||
irq_set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */
|
||||
irq_set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW);
|
||||
|
||||
return 0;
|
||||
}
|
||||
arch_initcall(xxs1500_init_irq);
|
||||
|
|
@ -1,63 +0,0 @@
|
|||
/*
|
||||
* BRIEF MODULE DESCRIPTION
|
||||
* XXS1500 board setup
|
||||
*
|
||||
* Copyright 2003, 2008 MontaVista Software Inc.
|
||||
* Author: MontaVista Software, Inc. <source@mvista.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along
|
||||
* with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
|
||||
#include <asm/bootinfo.h>
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
#include <prom.h>
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "XXS1500";
|
||||
}
|
||||
|
||||
void __init prom_init(void)
|
||||
{
|
||||
unsigned char *memsize_str;
|
||||
unsigned long memsize;
|
||||
|
||||
prom_argc = fw_arg0;
|
||||
prom_argv = (char **)fw_arg1;
|
||||
prom_envp = (char **)fw_arg2;
|
||||
|
||||
prom_init_cmdline();
|
||||
|
||||
memsize_str = prom_getenv("memsize");
|
||||
if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
|
||||
memsize = 0x04000000;
|
||||
|
||||
add_memory_region(0, memsize, BOOT_MEM_RAM);
|
||||
}
|
||||
|
||||
void prom_putchar(unsigned char c)
|
||||
{
|
||||
alchemy_uart_putchar(AU1000_UART0_PHYS_ADDR, c);
|
||||
}
|
||||
|
|
@ -1,63 +0,0 @@
|
|||
/*
|
||||
* XXS1500 board platform device registration
|
||||
*
|
||||
* Copyright (C) 2009 Manuel Lauss
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <asm/mach-au1x00/au1000.h>
|
||||
|
||||
static struct resource xxs1500_pcmcia_res[] = {
|
||||
{
|
||||
.name = "pcmcia-io",
|
||||
.flags = IORESOURCE_MEM,
|
||||
.start = AU1000_PCMCIA_IO_PHYS_ADDR,
|
||||
.end = AU1000_PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1,
|
||||
},
|
||||
{
|
||||
.name = "pcmcia-attr",
|
||||
.flags = IORESOURCE_MEM,
|
||||
.start = AU1000_PCMCIA_ATTR_PHYS_ADDR,
|
||||
.end = AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
|
||||
},
|
||||
{
|
||||
.name = "pcmcia-mem",
|
||||
.flags = IORESOURCE_MEM,
|
||||
.start = AU1000_PCMCIA_MEM_PHYS_ADDR,
|
||||
.end = AU1000_PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device xxs1500_pcmcia_dev = {
|
||||
.name = "xxs1500_pcmcia",
|
||||
.id = -1,
|
||||
.num_resources = ARRAY_SIZE(xxs1500_pcmcia_res),
|
||||
.resource = xxs1500_pcmcia_res,
|
||||
};
|
||||
|
||||
static struct platform_device *xxs1500_devs[] __initdata = {
|
||||
&xxs1500_pcmcia_dev,
|
||||
};
|
||||
|
||||
static int __init xxs1500_dev_init(void)
|
||||
{
|
||||
return platform_add_devices(xxs1500_devs,
|
||||
ARRAY_SIZE(xxs1500_devs));
|
||||
}
|
||||
device_initcall(xxs1500_dev_init);
|
||||
Loading…
Reference in New Issue
Block a user