From 6cd99b7828445dc18e9004c81067c36e8d9caa01 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 24 Oct 2008 19:25:27 +0200 Subject: [PATCH 01/30] mfd: Don't mark WM8350 security register as volatile There's no need to read this back from the chip each time. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-regmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c index 974678db22cd..aaf394aa9c2d 100644 --- a/drivers/mfd/wm8350-regmap.c +++ b/drivers/mfd/wm8350-regmap.c @@ -1307,7 +1307,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = { { 0xFF3F, 0xE03F, 0x0000 }, /* R216 - Main Bandgap Control */ { 0xEF2F, 0xE02F, 0x0000 }, /* R217 - OSC Control */ { 0xF3FF, 0xB3FF, 0xc000 }, /* R218 - RTC Tick Control */ - { 0xFFFF, 0xFFFF, 0xFFFF }, /* R219 */ + { 0xFFFF, 0xFFFF, 0x0000 }, /* R219 - Security */ { 0x09FF, 0x01FF, 0x0000 }, /* R220 - RAM BIST 1 */ { 0x0000, 0x0000, 0x0000 }, /* R221 */ { 0xFFFF, 0xFFFF, 0xFFFF }, /* R222 */ From 2c5212279a89224512e421fa9f8bd0fabbab77d8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 8 Nov 2008 00:52:54 +0100 Subject: [PATCH 02/30] mfd: Remove i.MX31ism from WM8350 i2c driver Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-i2c.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c index 3e0ce0e50ea2..876e693582bd 100644 --- a/drivers/mfd/wm8350-i2c.c +++ b/drivers/mfd/wm8350-i2c.c @@ -1,8 +1,6 @@ /* * wm8350-i2c.c -- Generic I2C driver for Wolfson WM8350 PMIC * - * This driver defines and configures the WM8350 for the Freescale i.MX32ADS. - * * Copyright 2007, 2008 Wolfson Microelectronics PLC. * * Author: Liam Girdwood From 858e674466427b1236eb5ef9568999a7df286b1e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 8 Nov 2008 00:57:33 +0100 Subject: [PATCH 03/30] mfd: Add some documentation for WM8350 register lock Hopefully this will make the purpose of these functions a bit clearer, it's not immediately obvious that the lock is a hardware feature. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 0d47fb9e4b3b..d63a530c4fe8 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -299,6 +299,13 @@ int wm8350_block_write(struct wm8350 *wm8350, int start_reg, int regs, } EXPORT_SYMBOL_GPL(wm8350_block_write); +/** + * wm8350_reg_lock() + * + * The WM8350 has a hardware lock which can be used to prevent writes to + * some registers (generally those which can cause particularly serious + * problems if misused). This function enables that lock. + */ int wm8350_reg_lock(struct wm8350 *wm8350) { u16 key = WM8350_LOCK_KEY; @@ -314,6 +321,15 @@ int wm8350_reg_lock(struct wm8350 *wm8350) } EXPORT_SYMBOL_GPL(wm8350_reg_lock); +/** + * wm8350_reg_unlock() + * + * The WM8350 has a hardware lock which can be used to prevent writes to + * some registers (generally those which can cause particularly serious + * problems if misused). This function disables that lock so updates + * can be performed. For maximum safety this should be done only when + * required. + */ int wm8350_reg_unlock(struct wm8350 *wm8350) { u16 key = WM8350_UNLOCK_KEY; From 0c8a601678960fbcc1c1185a283d6d107575810b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 8 Nov 2008 01:10:16 +0100 Subject: [PATCH 04/30] mfd: Add WM8350 revision H support No other software changes are required. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 7 ++++++- include/linux/mfd/wm8350/core.h | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index d63a530c4fe8..c013afde260d 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1202,9 +1202,14 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, dev_info(wm8350->dev, "Found Rev G device\n"); wm8350->rev = WM8350_REV_G; break; + case WM8350_REV_H: + dev_info(wm8350->dev, "Found Rev H device\n"); + wm8350->rev = WM8350_REV_H; + break; default: /* For safety we refuse to run on unknown hardware */ - dev_info(wm8350->dev, "Found unknown rev\n"); + dev_info(wm8350->dev, "Found unknown rev %x\n", + (id2 & WM8350_CHIP_REV_MASK) >> 12); ret = -ENODEV; goto err; } diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index 6ebf97f2a475..9490ec175d5a 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -536,6 +536,7 @@ #define WM8350_REV_E 0x4 #define WM8350_REV_F 0x5 #define WM8350_REV_G 0x6 +#define WM8350_REV_H 0x7 #define WM8350_NUM_IRQ 63 From 67488526349d043372d141c054f4dc6313780b3c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 8 Nov 2008 01:10:21 +0100 Subject: [PATCH 05/30] mfd: Add AUXADC support for WM8350 The auxiliary ADC in the WM8350 is shared between several subdevices so access to it needs to be arbitrated by the core driver. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 51 ++++++++++++++++++++++++++- include/linux/mfd/wm8350/comparator.h | 8 +++++ include/linux/mfd/wm8350/core.h | 2 ++ 3 files changed, 60 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index c013afde260d..60439bd3984d 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -63,7 +63,6 @@ */ static DEFINE_MUTEX(io_mutex); static DEFINE_MUTEX(reg_lock_mutex); -static DEFINE_MUTEX(auxadc_mutex); /* Perform a physical read from the device. */ @@ -1082,6 +1081,55 @@ int wm8350_unmask_irq(struct wm8350 *wm8350, int irq) } EXPORT_SYMBOL_GPL(wm8350_unmask_irq); +int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, int vref) +{ + u16 reg, result = 0; + int tries = 5; + + if (channel < WM8350_AUXADC_AUX1 || channel > WM8350_AUXADC_TEMP) + return -EINVAL; + if (channel >= WM8350_AUXADC_USB && channel <= WM8350_AUXADC_TEMP + && (scale != 0 || vref != 0)) + return -EINVAL; + + mutex_lock(&wm8350->auxadc_mutex); + + /* Turn on the ADC */ + reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, reg | WM8350_AUXADC_ENA); + + if (scale || vref) { + reg = scale << 13; + reg |= vref << 12; + wm8350_reg_write(wm8350, WM8350_AUX1_READBACK + channel, reg); + } + + reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1); + reg |= 1 << channel | WM8350_AUXADC_POLL; + wm8350_reg_write(wm8350, WM8350_DIGITISER_CONTROL_1, reg); + + do { + schedule_timeout_interruptible(1); + reg = wm8350_reg_read(wm8350, WM8350_DIGITISER_CONTROL_1); + } while (tries-- && (reg & WM8350_AUXADC_POLL)); + + if (!tries) + dev_err(wm8350->dev, "adc chn %d read timeout\n", channel); + else + result = wm8350_reg_read(wm8350, + WM8350_AUX1_READBACK + channel); + + /* Turn off the ADC */ + reg = wm8350_reg_read(wm8350, WM8350_POWER_MGMT_5); + wm8350_reg_write(wm8350, WM8350_POWER_MGMT_5, + reg & ~WM8350_AUXADC_ENA); + + mutex_unlock(&wm8350->auxadc_mutex); + + return result & WM8350_AUXADC_DATA1_MASK; +} +EXPORT_SYMBOL_GPL(wm8350_read_auxadc); + /* * Cache is always host endian. */ @@ -1239,6 +1287,7 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, } } + mutex_init(&wm8350->auxadc_mutex); mutex_init(&wm8350->irq_mutex); INIT_WORK(&wm8350->irq_work, wm8350_irq_worker); if (irq) { diff --git a/include/linux/mfd/wm8350/comparator.h b/include/linux/mfd/wm8350/comparator.h index 053788649452..54bc5d0fd502 100644 --- a/include/linux/mfd/wm8350/comparator.h +++ b/include/linux/mfd/wm8350/comparator.h @@ -164,4 +164,12 @@ #define WM8350_AUXADC_BATT 6 #define WM8350_AUXADC_TEMP 7 +struct wm8350; + +/* + * AUX ADC Readback + */ +int wm8350_read_auxadc(struct wm8350 *wm8350, int channel, int scale, + int vref); + #endif diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index 9490ec175d5a..cc190055b9c4 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -573,6 +573,8 @@ struct wm8350 { void *src); u16 *reg_cache; + struct mutex auxadc_mutex; + /* Interrupt handling */ struct work_struct irq_work; struct mutex irq_mutex; /* IRQ table mutex */ From 3fba19ec1ae5b460c73a7f32efed8d3b3300b246 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 8 Nov 2008 01:13:16 +0100 Subject: [PATCH 06/30] mfd: allow reading entire register banks on twl4030 Minor change to the TWL4030 utility interface: support reads of all 256 bytes in each register bank (vs just 255). This can help when debugging, but is otherwise a NOP. Signed-off-by: David Brownell Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-core.c | 4 ++-- include/linux/i2c/twl4030.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index dd843c4fbcc7..ef9a971e3ead 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -225,7 +225,7 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { * * Returns the result of operation - 0 is success */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes) +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) { int ret; int sid; @@ -274,7 +274,7 @@ EXPORT_SYMBOL(twl4030_i2c_write); * * Returns result of operation - num_bytes is success else failure. */ -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes) +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) { int ret; u8 val; diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index fb604dcd38f1..ae25c907b7cf 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -78,8 +78,8 @@ int twl4030_i2c_read_u8(u8 mod_no, u8 *val, u8 reg); * IMPORTANT: For twl4030_i2c_write(), allocate num_bytes + 1 * for the value, and populate your data starting at offset 1. */ -int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); -int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, u8 num_bytes); +int twl4030_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); +int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes); /*----------------------------------------------------------------------*/ From 14431aa0c5a443d13d24e6f865a8838f97dab973 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 16 Nov 2008 20:16:47 +0100 Subject: [PATCH 07/30] power_supply: Add support for WM8350 PMU This patch adds support for the PMU provided by the WM8350 which implements battery, line and USB supplies including a battery charger. The hardware functions largely autonomously, with minimal software control required to initiate fast charging. Support for configuration of the USB supply is not yet implemented. This means that the hardware will remain in the mode configured at startup, by default limiting the current drawn from USB to 100mA. This driver was originally written by Liam Girdwood with subsequent updates for submission by Mark Brown. Signed-off-by: Mark Brown Acked-by: Anton Vorontsov Signed-off-by: Samuel Ortiz --- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/wm8350_power.c | 515 ++++++++++++++++++++++++++++++ include/linux/mfd/wm8350/core.h | 26 ++ include/linux/mfd/wm8350/supply.h | 23 +- 5 files changed, 571 insertions(+), 1 deletion(-) create mode 100644 drivers/power/wm8350_power.c diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 8e0c2b47803c..52f86767f72e 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -29,6 +29,13 @@ config APM_POWER Say Y here to enable support APM status emulation using battery class devices. +config WM8350_POWER + tristate "WM8350 PMU support" + depends on MFD_WM8350 + help + Say Y here to enable support for the power management unit + provided by the Wolfson Microelectronics WM8350 PMIC. + config BATTERY_DS2760 tristate "DS2760 battery driver (HP iPAQ & others)" select W1 diff --git a/drivers/power/Makefile b/drivers/power/Makefile index e8f1ecec5d8f..e6f68655d9e8 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_POWER_SUPPLY) += power_supply.o obj-$(CONFIG_PDA_POWER) += pda_power.o obj-$(CONFIG_APM_POWER) += apm_power.o +obj-$(CONFIG_WM8350_POWER) += wm8350_power.o obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c new file mode 100644 index 000000000000..9c0a847a1139 --- /dev/null +++ b/drivers/power/wm8350_power.c @@ -0,0 +1,515 @@ +/* + * Battery driver for wm8350 PMIC + * + * Copyright 2007, 2008 Wolfson Microelectronics PLC. + * + * Based on OLPC Battery Driver + * + * Copyright 2006 David Woodhouse + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +static int wm8350_read_battery_uvolts(struct wm8350 *wm8350) +{ + return wm8350_read_auxadc(wm8350, WM8350_AUXADC_BATT, 0, 0) + * WM8350_AUX_COEFF; +} + +static int wm8350_read_line_uvolts(struct wm8350 *wm8350) +{ + return wm8350_read_auxadc(wm8350, WM8350_AUXADC_LINE, 0, 0) + * WM8350_AUX_COEFF; +} + +static int wm8350_read_usb_uvolts(struct wm8350 *wm8350) +{ + return wm8350_read_auxadc(wm8350, WM8350_AUXADC_USB, 0, 0) + * WM8350_AUX_COEFF; +} + +#define WM8350_BATT_SUPPLY 1 +#define WM8350_USB_SUPPLY 2 +#define WM8350_LINE_SUPPLY 4 + +static inline int wm8350_charge_time_min(struct wm8350 *wm8350, int min) +{ + if (wm8350->rev < WM8350_REV_G) + return (((min - 30) / 15) & 0xf) << 8; + else + return (((min - 30) / 30) & 0xf) << 8; +} + +static int wm8350_get_supplies(struct wm8350 *wm8350) +{ + u16 sm, ov, co, chrg; + int supplies = 0; + + sm = wm8350_reg_read(wm8350, WM8350_STATE_MACHINE_STATUS); + ov = wm8350_reg_read(wm8350, WM8350_MISC_OVERRIDES); + co = wm8350_reg_read(wm8350, WM8350_COMPARATOR_OVERRIDES); + chrg = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2); + + /* USB_SM */ + sm = (sm & WM8350_USB_SM_MASK) >> WM8350_USB_SM_SHIFT; + + /* CHG_ISEL */ + chrg &= WM8350_CHG_ISEL_MASK; + + /* If the USB state machine is active then we're using that with or + * without battery, otherwise check for wall supply */ + if (((sm == WM8350_USB_SM_100_SLV) || + (sm == WM8350_USB_SM_500_SLV) || + (sm == WM8350_USB_SM_STDBY_SLV)) + && !(ov & WM8350_USB_LIMIT_OVRDE)) + supplies = WM8350_USB_SUPPLY; + else if (((sm == WM8350_USB_SM_100_SLV) || + (sm == WM8350_USB_SM_500_SLV) || + (sm == WM8350_USB_SM_STDBY_SLV)) + && (ov & WM8350_USB_LIMIT_OVRDE) && (chrg == 0)) + supplies = WM8350_USB_SUPPLY | WM8350_BATT_SUPPLY; + else if (co & WM8350_WALL_FB_OVRDE) + supplies = WM8350_LINE_SUPPLY; + else + supplies = WM8350_BATT_SUPPLY; + + return supplies; +} + +static int wm8350_charger_config(struct wm8350 *wm8350, + struct wm8350_charger_policy *policy) +{ + u16 reg, eoc_mA, fast_limit_mA; + + if (!policy) { + dev_warn(wm8350->dev, + "No charger policy, charger not configured.\n"); + return -EINVAL; + } + + /* make sure USB fast charge current is not > 500mA */ + if (policy->fast_limit_USB_mA > 500) { + dev_err(wm8350->dev, "USB fast charge > 500mA\n"); + return -EINVAL; + } + + eoc_mA = WM8350_CHG_EOC_mA(policy->eoc_mA); + + wm8350_reg_unlock(wm8350); + + reg = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1) + & WM8350_CHG_ENA_R168; + wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1, + reg | eoc_mA | policy->trickle_start_mV | + WM8350_CHG_TRICKLE_TEMP_CHOKE | + WM8350_CHG_TRICKLE_USB_CHOKE | + WM8350_CHG_FAST_USB_THROTTLE); + + if (wm8350_get_supplies(wm8350) & WM8350_USB_SUPPLY) { + fast_limit_mA = + WM8350_CHG_FAST_LIMIT_mA(policy->fast_limit_USB_mA); + wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2, + policy->charge_mV | policy->trickle_charge_USB_mA | + fast_limit_mA | wm8350_charge_time_min(wm8350, + policy->charge_timeout)); + + } else { + fast_limit_mA = + WM8350_CHG_FAST_LIMIT_mA(policy->fast_limit_mA); + wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2, + policy->charge_mV | policy->trickle_charge_mA | + fast_limit_mA | wm8350_charge_time_min(wm8350, + policy->charge_timeout)); + } + + wm8350_reg_lock(wm8350); + return 0; +} + +static int wm8350_batt_status(struct wm8350 *wm8350) +{ + u16 state; + + state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2); + state &= WM8350_CHG_STS_MASK; + + switch (state) { + case WM8350_CHG_STS_OFF: + return POWER_SUPPLY_STATUS_DISCHARGING; + + case WM8350_CHG_STS_TRICKLE: + case WM8350_CHG_STS_FAST: + return POWER_SUPPLY_STATUS_CHARGING; + + default: + return POWER_SUPPLY_STATUS_UNKNOWN; + } +} + +static ssize_t charger_state_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wm8350 *wm8350 = dev_get_drvdata(dev); + char *charge; + int state; + + state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) & + WM8350_CHG_STS_MASK; + switch (state) { + case WM8350_CHG_STS_OFF: + charge = "Charger Off"; + break; + case WM8350_CHG_STS_TRICKLE: + charge = "Trickle Charging"; + break; + case WM8350_CHG_STS_FAST: + charge = "Fast Charging"; + break; + default: + return 0; + } + + return sprintf(buf, "%s\n", charge); +} + +static DEVICE_ATTR(charger_state, 0444, charger_state_show, NULL); + +static void wm8350_charger_handler(struct wm8350 *wm8350, int irq, void *data) +{ + struct wm8350_power *power = &wm8350->power; + struct wm8350_charger_policy *policy = power->policy; + + switch (irq) { + case WM8350_IRQ_CHG_BAT_HOT: + dev_err(wm8350->dev, "battery too hot\n"); + break; + case WM8350_IRQ_CHG_BAT_COLD: + dev_err(wm8350->dev, "battery too cold\n"); + break; + case WM8350_IRQ_CHG_BAT_FAIL: + dev_err(wm8350->dev, "battery failed\n"); + break; + case WM8350_IRQ_CHG_TO: + dev_err(wm8350->dev, "charger timeout\n"); + break; + case WM8350_IRQ_CHG_END: + power_supply_changed(&power->battery); + break; + case WM8350_IRQ_CHG_START: + power_supply_changed(&power->battery); + break; + + case WM8350_IRQ_CHG_FAST_RDY: + dev_dbg(wm8350->dev, "fast charger ready\n"); + wm8350_charger_config(wm8350, policy); + wm8350_reg_unlock(wm8350); + wm8350_set_bits(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1, + WM8350_CHG_FAST); + wm8350_reg_lock(wm8350); + break; + + case WM8350_IRQ_CHG_VBATT_LT_3P9: + dev_warn(wm8350->dev, "battery < 3.9V\n"); + break; + case WM8350_IRQ_CHG_VBATT_LT_3P1: + dev_warn(wm8350->dev, "battery < 3.1V\n"); + break; + case WM8350_IRQ_CHG_VBATT_LT_2P85: + dev_warn(wm8350->dev, "battery < 2.85V\n"); + break; + + /* Supply change. We will overnotify but it should do + * no harm. */ + case WM8350_IRQ_EXT_USB_FB: + case WM8350_IRQ_EXT_WALL_FB: + wm8350_charger_config(wm8350, policy); + case WM8350_IRQ_EXT_BAT_FB: /* Fall through */ + power_supply_changed(&power->battery); + power_supply_changed(&power->usb); + power_supply_changed(&power->ac); + break; + + default: + dev_err(wm8350->dev, "Unknown interrupt %d\n", irq); + } +} + +/********************************************************************* + * AC Power + *********************************************************************/ +static int wm8350_ac_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm8350 *wm8350 = dev_get_drvdata(psy->dev->parent); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = !!(wm8350_get_supplies(wm8350) & + WM8350_LINE_SUPPLY); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = wm8350_read_line_uvolts(wm8350); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static enum power_supply_property wm8350_ac_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +}; + +/********************************************************************* + * USB Power + *********************************************************************/ +static int wm8350_usb_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm8350 *wm8350 = dev_get_drvdata(psy->dev->parent); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = !!(wm8350_get_supplies(wm8350) & + WM8350_USB_SUPPLY); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = wm8350_read_usb_uvolts(wm8350); + break; + default: + ret = -EINVAL; + break; + } + return ret; +} + +static enum power_supply_property wm8350_usb_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +}; + +/********************************************************************* + * Battery properties + *********************************************************************/ + +static int wm8350_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct wm8350 *wm8350 = dev_get_drvdata(psy->dev->parent); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = wm8350_batt_status(wm8350); + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = !!(wm8350_get_supplies(wm8350) & + WM8350_BATT_SUPPLY); + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = wm8350_read_battery_uvolts(wm8350); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static enum power_supply_property wm8350_bat_props[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +}; + +/********************************************************************* + * Initialisation + *********************************************************************/ + +static void wm8350_init_charger(struct wm8350 *wm8350) +{ + /* register our interest in charger events */ + wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT); + wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD); + wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL); + wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_TO); + wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_END); + wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_START); + wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY); + wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9); + wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1); + wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85); + + /* and supply change events */ + wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_USB_FB); + wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_WALL_FB); + wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, + wm8350_charger_handler, NULL); + wm8350_unmask_irq(wm8350, WM8350_IRQ_EXT_BAT_FB); +} + +static void free_charger_irq(struct wm8350 *wm8350) +{ + wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT); + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT); + wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD); + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD); + wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL); + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL); + wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_TO); + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO); + wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_END); + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END); + wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_START); + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START); + wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9); + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9); + wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1); + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1); + wm8350_mask_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85); + wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85); + wm8350_mask_irq(wm8350, WM8350_IRQ_EXT_USB_FB); + wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB); + wm8350_mask_irq(wm8350, WM8350_IRQ_EXT_WALL_FB); + wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB); + wm8350_mask_irq(wm8350, WM8350_IRQ_EXT_BAT_FB); + wm8350_free_irq(wm8350, WM8350_IRQ_EXT_BAT_FB); +} + +static __devinit int wm8350_power_probe(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_power *power = &wm8350->power; + struct wm8350_charger_policy *policy = power->policy; + struct power_supply *usb = &power->usb; + struct power_supply *battery = &power->battery; + struct power_supply *ac = &power->ac; + int ret; + + ac->name = "wm8350-ac"; + ac->type = POWER_SUPPLY_TYPE_MAINS; + ac->properties = wm8350_ac_props; + ac->num_properties = ARRAY_SIZE(wm8350_ac_props); + ac->get_property = wm8350_ac_get_prop; + ret = power_supply_register(&pdev->dev, ac); + if (ret) + return ret; + + battery->name = "wm8350-battery"; + battery->properties = wm8350_bat_props; + battery->num_properties = ARRAY_SIZE(wm8350_bat_props); + battery->get_property = wm8350_bat_get_property; + battery->use_for_apm = 1; + ret = power_supply_register(&pdev->dev, battery); + if (ret) + goto battery_failed; + + usb->name = "wm8350-usb", + usb->type = POWER_SUPPLY_TYPE_USB; + usb->properties = wm8350_usb_props; + usb->num_properties = ARRAY_SIZE(wm8350_usb_props); + usb->get_property = wm8350_usb_get_prop; + ret = power_supply_register(&pdev->dev, usb); + if (ret) + goto usb_failed; + + ret = device_create_file(&pdev->dev, &dev_attr_charger_state); + if (ret < 0) + dev_warn(wm8350->dev, "failed to add charge sysfs: %d\n", ret); + ret = 0; + + wm8350_init_charger(wm8350); + if (wm8350_charger_config(wm8350, policy) == 0) { + wm8350_reg_unlock(wm8350); + wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5, WM8350_CHG_ENA); + wm8350_reg_lock(wm8350); + } + + return ret; + +usb_failed: + power_supply_unregister(battery); +battery_failed: + power_supply_unregister(ac); + + return ret; +} + +static __devexit int wm8350_power_remove(struct platform_device *pdev) +{ + struct wm8350 *wm8350 = platform_get_drvdata(pdev); + struct wm8350_power *power = &wm8350->power; + + free_charger_irq(wm8350); + device_remove_file(&pdev->dev, &dev_attr_charger_state); + power_supply_unregister(&power->battery); + power_supply_unregister(&power->ac); + power_supply_unregister(&power->usb); + return 0; +} + +static struct platform_driver wm8350_power_driver = { + .probe = wm8350_power_probe, + .remove = __devexit_p(wm8350_power_remove), + .driver = { + .name = "wm8350-power", + }, +}; + +static int __init wm8350_power_init(void) +{ + return platform_driver_register(&wm8350_power_driver); +} +module_init(wm8350_power_init); + +static void __exit wm8350_power_exit(void) +{ + platform_driver_unregister(&wm8350_power_driver); +} +module_exit(wm8350_power_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Power supply driver for WM8350"); +MODULE_ALIAS("platform:wm8350-power"); diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index cc190055b9c4..d2614dfc9397 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -57,6 +57,9 @@ #define WM8350_OVER_CURRENT_INT_STATUS_MASK 0x25 #define WM8350_GPIO_INT_STATUS_MASK 0x26 #define WM8350_COMPARATOR_INT_STATUS_MASK 0x27 +#define WM8350_MISC_OVERRIDES 0xE3 +#define WM8350_COMPARATOR_OVERRIDES 0xE7 +#define WM8350_STATE_MACHINE_STATUS 0xE9 #define WM8350_MAX_REGISTER 0xFF @@ -523,6 +526,29 @@ #define WM8350_DC2_STS 0x0002 #define WM8350_DC1_STS 0x0001 +/* + * R227 (0xE3) - Misc Overrides + */ +#define WM8350_USB_LIMIT_OVRDE 0x0400 + +/* + * R227 (0xE7) - Comparator Overrides + */ +#define WM8350_USB_FB_OVRDE 0x8000 +#define WM8350_WALL_FB_OVRDE 0x4000 +#define WM8350_BATT_FB_OVRDE 0x2000 + + +/* + * R233 (0xE9) - State Machinine Status + */ +#define WM8350_USB_SM_MASK 0x0700 +#define WM8350_USB_SM_SHIFT 8 + +#define WM8350_USB_SM_100_SLV 1 +#define WM8350_USB_SM_500_SLV 5 +#define WM8350_USB_SM_STDBY_SLV 7 + /* WM8350 wake up conditions */ #define WM8350_IRQ_WKUP_OFF_STATE 43 #define WM8350_IRQ_WKUP_HIB_STATE 44 diff --git a/include/linux/mfd/wm8350/supply.h b/include/linux/mfd/wm8350/supply.h index 1c8f3cde79b0..79721513fa9f 100644 --- a/include/linux/mfd/wm8350/supply.h +++ b/include/linux/mfd/wm8350/supply.h @@ -13,7 +13,8 @@ #ifndef __LINUX_MFD_WM8350_SUPPLY_H_ #define __LINUX_MFD_WM8350_SUPPLY_H_ -#include +#include +#include /* * Charger registers @@ -104,8 +105,28 @@ #define WM8350_IRQ_EXT_WALL_FB 37 #define WM8350_IRQ_EXT_BAT_FB 38 +/* + * Policy to control charger state machine. + */ +struct wm8350_charger_policy { + + /* charger state machine policy - set in machine driver */ + int eoc_mA; /* end of charge current (mA) */ + int charge_mV; /* charge voltage */ + int fast_limit_mA; /* fast charge current limit */ + int fast_limit_USB_mA; /* USB fast charge current limit */ + int charge_timeout; /* charge timeout (mins) */ + int trickle_start_mV; /* trickle charge starts at mV */ + int trickle_charge_mA; /* trickle charge current */ + int trickle_charge_USB_mA; /* USB trickle charge current */ +}; + struct wm8350_power { struct platform_device *pdev; + struct power_supply battery; + struct power_supply usb; + struct power_supply ac; + struct wm8350_charger_policy *policy; }; #endif From d756f4a4446227ca9626087939a6769ca55ab036 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 24 Nov 2008 20:20:30 +0100 Subject: [PATCH 08/30] mfd: Switch WM8350 revision detection to a feature based model Rather than check for chip revisions in the WM8350 drivers have the core code set flags for relevant differences. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 6 ++---- drivers/power/wm8350_power.c | 2 +- include/linux/mfd/wm8350/core.h | 2 -- include/linux/mfd/wm8350/supply.h | 2 ++ 4 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 60439bd3984d..764bf15ea684 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1240,19 +1240,17 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, switch ((id2 & WM8350_CHIP_REV_MASK) >> 12) { case WM8350_REV_E: dev_info(wm8350->dev, "Found Rev E device\n"); - wm8350->rev = WM8350_REV_E; break; case WM8350_REV_F: dev_info(wm8350->dev, "Found Rev F device\n"); - wm8350->rev = WM8350_REV_F; break; case WM8350_REV_G: dev_info(wm8350->dev, "Found Rev G device\n"); - wm8350->rev = WM8350_REV_G; + wm8350->power.rev_g_coeff = 1; break; case WM8350_REV_H: dev_info(wm8350->dev, "Found Rev H device\n"); - wm8350->rev = WM8350_REV_H; + wm8350->power.rev_g_coeff = 1; break; default: /* For safety we refuse to run on unknown hardware */ diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c index 9c0a847a1139..74e7593beffb 100644 --- a/drivers/power/wm8350_power.c +++ b/drivers/power/wm8350_power.c @@ -44,7 +44,7 @@ static int wm8350_read_usb_uvolts(struct wm8350 *wm8350) static inline int wm8350_charge_time_min(struct wm8350 *wm8350, int min) { - if (wm8350->rev < WM8350_REV_G) + if (!wm8350->power.rev_g_coeff) return (((min - 30) / 15) & 0xf) << 8; else return (((min - 30) / 30) & 0xf) << 8; diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index d2614dfc9397..3c9735663f36 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -585,8 +585,6 @@ struct wm8350_irq { }; struct wm8350 { - int rev; /* chip revision */ - struct device *dev; /* device IO */ diff --git a/include/linux/mfd/wm8350/supply.h b/include/linux/mfd/wm8350/supply.h index 79721513fa9f..2b9479310bbd 100644 --- a/include/linux/mfd/wm8350/supply.h +++ b/include/linux/mfd/wm8350/supply.h @@ -127,6 +127,8 @@ struct wm8350_power { struct power_supply usb; struct power_supply ac; struct wm8350_charger_policy *policy; + + int rev_g_coeff; }; #endif From b797a5551979da22b0a35632198ffc8a330d9537 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 24 Nov 2008 20:22:58 +0100 Subject: [PATCH 09/30] mfd: Refactor WM8350 chip identification Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 80 ++++++++++++++++++++------------- include/linux/mfd/wm8350/core.h | 6 +++ 2 files changed, 56 insertions(+), 30 deletions(-) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 764bf15ea684..2188d759cbde 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1227,52 +1227,72 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, struct wm8350_platform_data *pdata) { int ret = -EINVAL; - u16 id1, id2, mask, mode; + u16 id1, id2, mask_rev; + u16 cust_id, mode, chip_rev; /* get WM8350 revision and config mode */ wm8350->read_dev(wm8350, WM8350_RESET_ID, sizeof(id1), &id1); wm8350->read_dev(wm8350, WM8350_ID, sizeof(id2), &id2); + wm8350->read_dev(wm8350, WM8350_REVISION, sizeof(mask_rev), &mask_rev); id1 = be16_to_cpu(id1); id2 = be16_to_cpu(id2); + mask_rev = be16_to_cpu(mask_rev); - if (id1 == 0x6143) { - switch ((id2 & WM8350_CHIP_REV_MASK) >> 12) { - case WM8350_REV_E: - dev_info(wm8350->dev, "Found Rev E device\n"); - break; - case WM8350_REV_F: - dev_info(wm8350->dev, "Found Rev F device\n"); - break; - case WM8350_REV_G: - dev_info(wm8350->dev, "Found Rev G device\n"); - wm8350->power.rev_g_coeff = 1; - break; - case WM8350_REV_H: - dev_info(wm8350->dev, "Found Rev H device\n"); - wm8350->power.rev_g_coeff = 1; - break; - default: - /* For safety we refuse to run on unknown hardware */ - dev_info(wm8350->dev, "Found unknown rev %x\n", - (id2 & WM8350_CHIP_REV_MASK) >> 12); - ret = -ENODEV; - goto err; - } - } else { - dev_info(wm8350->dev, "Device with ID %x is not a WM8350\n", - id1); + if (id1 != 0x6143) { + dev_err(wm8350->dev, + "Device with ID %x is not a WM8350\n", id1); ret = -ENODEV; goto err; } mode = id2 & WM8350_CONF_STS_MASK >> 10; - mask = id2 & WM8350_CUST_ID_MASK; - dev_info(wm8350->dev, "Config mode %d, ROM mask %d\n", mode, mask); + cust_id = id2 & WM8350_CUST_ID_MASK; + chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12; + dev_info(wm8350->dev, + "CONF_STS %d, CUST_ID %d, MASK_REV %d, CHIP_REV %d\n", + mode, cust_id, mask_rev, chip_rev); + + if (cust_id != 0) { + dev_err(wm8350->dev, "Unsupported CUST_ID\n"); + ret = -ENODEV; + goto err; + } + + switch (mask_rev) { + case 0: + switch (chip_rev) { + case WM8350_REV_E: + dev_info(wm8350->dev, "WM8350 Rev E\n"); + break; + case WM8350_REV_F: + dev_info(wm8350->dev, "WM8350 Rev F\n"); + break; + case WM8350_REV_G: + dev_info(wm8350->dev, "WM8350 Rev G\n"); + wm8350->power.rev_g_coeff = 1; + break; + case WM8350_REV_H: + dev_info(wm8350->dev, "WM8350 Rev H\n"); + wm8350->power.rev_g_coeff = 1; + break; + default: + /* For safety we refuse to run on unknown hardware */ + dev_err(wm8350->dev, "Unknown WM8350 CHIP_REV\n"); + ret = -ENODEV; + goto err; + } + break; + + default: + dev_err(wm8350->dev, "Unknown MASK_REV\n"); + ret = -ENODEV; + goto err; + } ret = wm8350_create_cache(wm8350, mode); if (ret < 0) { - printk(KERN_ERR "wm8350: failed to create register cache\n"); + dev_err(wm8350->dev, "Failed to create register cache\n"); return ret; } diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index 3c9735663f36..2a7abeebe777 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -29,6 +29,7 @@ */ #define WM8350_RESET_ID 0x00 #define WM8350_ID 0x01 +#define WM8350_REVISION 0x02 #define WM8350_SYSTEM_CONTROL_1 0x03 #define WM8350_SYSTEM_CONTROL_2 0x04 #define WM8350_SYSTEM_HIBERNATE 0x05 @@ -79,6 +80,11 @@ #define WM8350_CONF_STS_MASK 0x0C00 #define WM8350_CUST_ID_MASK 0x00FF +/* + * R2 (0x02) - Revision + */ +#define WM8350_MASK_REV_MASK 0x00FF + /* * R3 (0x03) - System Control 1 */ From 7e386e6e0e4f34f0545e8923e22fe4dd61ef9d48 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 30 Nov 2008 22:43:21 +0100 Subject: [PATCH 10/30] power_supply: Add cold to the POWER_SUPPLY_HEALTH report values Some systems are able to report problems with batteries being under temperature. Signed-off-by: Mark Brown Acked-by: Anton Vorontsov Signed-off-by: Samuel Ortiz --- drivers/power/power_supply_sysfs.c | 2 +- include/linux/power_supply.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index 23ae8460f5c1..ac01e06817fb 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -45,7 +45,7 @@ static ssize_t power_supply_show_property(struct device *dev, }; static char *health_text[] = { "Unknown", "Good", "Overheat", "Dead", "Over voltage", - "Unspecified failure" + "Unspecified failure", "Cold", }; static char *technology_text[] = { "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd", diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h index f9348cba6dc1..8ff25e0e7f7a 100644 --- a/include/linux/power_supply.h +++ b/include/linux/power_supply.h @@ -45,6 +45,7 @@ enum { POWER_SUPPLY_HEALTH_DEAD, POWER_SUPPLY_HEALTH_OVERVOLTAGE, POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, + POWER_SUPPLY_HEALTH_COLD, }; enum { From 4008e879e1325c29362aa2c3fa4b527273ae15a8 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 30 Nov 2008 22:45:14 +0100 Subject: [PATCH 11/30] power_supply: Add battery health reporting for WM8350 Implement support for reporting battery health in the WM8350 battery interface. Since we are now able to report this via the classs remove the diagnostics from the interrupt handler. Signed-off-by: Mark Brown Acked-by: Anton Vorontsov Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-regmap.c | 2 +- drivers/power/wm8350_power.c | 33 +++++++++++++++++++++++++-------- include/linux/mfd/wm8350/core.h | 7 +++++++ 3 files changed, 33 insertions(+), 9 deletions(-) diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c index aaf394aa9c2d..b43d64c2b920 100644 --- a/drivers/mfd/wm8350-regmap.c +++ b/drivers/mfd/wm8350-regmap.c @@ -1314,7 +1314,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = { { 0xFFFF, 0xFFFF, 0xFFFF }, /* R223 */ { 0x0000, 0x0000, 0x0000 }, /* R224 */ { 0x8F3F, 0x0000, 0xFFFF }, /* R225 - DCDC/LDO status */ - { 0x0000, 0x0000, 0x0000 }, /* R226 */ + { 0x0000, 0x0000, 0xFFFF }, /* R226 - Charger status */ { 0x0000, 0x0000, 0xFFFF }, /* R227 */ { 0x0000, 0x0000, 0x0000 }, /* R228 */ { 0x0000, 0x0000, 0x0000 }, /* R229 */ diff --git a/drivers/power/wm8350_power.c b/drivers/power/wm8350_power.c index 74e7593beffb..1b16bf343f2f 100644 --- a/drivers/power/wm8350_power.c +++ b/drivers/power/wm8350_power.c @@ -190,22 +190,18 @@ static void wm8350_charger_handler(struct wm8350 *wm8350, int irq, void *data) struct wm8350_charger_policy *policy = power->policy; switch (irq) { - case WM8350_IRQ_CHG_BAT_HOT: - dev_err(wm8350->dev, "battery too hot\n"); - break; - case WM8350_IRQ_CHG_BAT_COLD: - dev_err(wm8350->dev, "battery too cold\n"); - break; case WM8350_IRQ_CHG_BAT_FAIL: dev_err(wm8350->dev, "battery failed\n"); break; case WM8350_IRQ_CHG_TO: dev_err(wm8350->dev, "charger timeout\n"); - break; - case WM8350_IRQ_CHG_END: power_supply_changed(&power->battery); break; + + case WM8350_IRQ_CHG_BAT_HOT: + case WM8350_IRQ_CHG_BAT_COLD: case WM8350_IRQ_CHG_START: + case WM8350_IRQ_CHG_END: power_supply_changed(&power->battery); break; @@ -308,6 +304,23 @@ static enum power_supply_property wm8350_usb_props[] = { * Battery properties *********************************************************************/ +static int wm8350_bat_check_health(struct wm8350 *wm8350) +{ + u16 reg; + + if (wm8350_read_battery_uvolts(wm8350) < 2850000) + return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + + reg = wm8350_reg_read(wm8350, WM8350_CHARGER_OVERRIDES); + if (reg & WM8350_CHG_BATT_HOT_OVRDE) + return POWER_SUPPLY_HEALTH_OVERHEAT; + + if (reg & WM8350_CHG_BATT_COLD_OVRDE) + return POWER_SUPPLY_HEALTH_COLD; + + return POWER_SUPPLY_HEALTH_GOOD; +} + static int wm8350_bat_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -326,6 +339,9 @@ static int wm8350_bat_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_VOLTAGE_NOW: val->intval = wm8350_read_battery_uvolts(wm8350); break; + case POWER_SUPPLY_PROP_HEALTH: + val->intval = wm8350_bat_check_health(wm8350); + break; default: ret = -EINVAL; break; @@ -338,6 +354,7 @@ static enum power_supply_property wm8350_bat_props[] = { POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_ONLINE, POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_HEALTH, }; /********************************************************************* diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index 2a7abeebe777..afeff6f1316c 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -58,6 +58,7 @@ #define WM8350_OVER_CURRENT_INT_STATUS_MASK 0x25 #define WM8350_GPIO_INT_STATUS_MASK 0x26 #define WM8350_COMPARATOR_INT_STATUS_MASK 0x27 +#define WM8350_CHARGER_OVERRIDES 0xE2 #define WM8350_MISC_OVERRIDES 0xE3 #define WM8350_COMPARATOR_OVERRIDES 0xE7 #define WM8350_STATE_MACHINE_STATUS 0xE9 @@ -532,6 +533,12 @@ #define WM8350_DC2_STS 0x0002 #define WM8350_DC1_STS 0x0001 +/* + * R226 (0xE2) - Charger status + */ +#define WM8350_CHG_BATT_HOT_OVRDE 0x8000 +#define WM8350_CHG_BATT_COLD_OVRDE 0x4000 + /* * R227 (0xE3) - Misc Overrides */ From 5725d66b9d18e630bb63e3b76bedf25fd1027265 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 1 Dec 2008 00:31:04 +0100 Subject: [PATCH 12/30] mfd: twl4030: simplified child creation code Minor cleanup to twl4030-core: define a helper function to populate a single child node, and use it to replace six inconsistent versions of the same logic. Both object and source code shrink. As part of this, some devices now have more IRQ resources: battery charger, keypad, ADC, and USB transceiver. That helps to remove some irq #defines that block the children's drivers code from compiling on non-OMAP platforms. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-core.c | 308 +++++++++++-------------------------- 1 file changed, 88 insertions(+), 220 deletions(-) diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index ef9a971e3ead..f5486cce86f4 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -352,6 +352,56 @@ EXPORT_SYMBOL(twl4030_i2c_read_u8); /*----------------------------------------------------------------------*/ +static struct device *add_child(unsigned chip, const char *name, + void *pdata, unsigned pdata_len, + bool can_wakeup, int irq0, int irq1) +{ + struct platform_device *pdev; + struct twl4030_client *twl = &twl4030_modules[chip]; + int status; + + pdev = platform_device_alloc(name, -1); + if (!pdev) { + dev_dbg(&twl->client->dev, "can't alloc dev\n"); + status = -ENOMEM; + goto err; + } + + device_init_wakeup(&pdev->dev, can_wakeup); + pdev->dev.parent = &twl->client->dev; + + if (pdata) { + status = platform_device_add_data(pdev, pdata, pdata_len); + if (status < 0) { + dev_dbg(&pdev->dev, "can't add platform_data\n"); + goto err; + } + } + + if (irq0) { + struct resource r[2] = { + { .start = irq0, .flags = IORESOURCE_IRQ, }, + { .start = irq1, .flags = IORESOURCE_IRQ, }, + }; + + status = platform_device_add_resources(pdev, r, irq1 ? 2 : 1); + if (status < 0) { + dev_dbg(&pdev->dev, "can't add irqs\n"); + goto err; + } + } + + status = platform_device_add(pdev); + +err: + if (status < 0) { + platform_device_put(pdev); + dev_err(&twl->client->dev, "can't add %s dev\n", name); + return ERR_PTR(status); + } + return &pdev->dev; +} + /* * NOTE: We know the first 8 IRQs after pdata->base_irq are * for the PIH, and the next are for the PWR_INT SIH, since @@ -360,250 +410,68 @@ EXPORT_SYMBOL(twl4030_i2c_read_u8); static int add_children(struct twl4030_platform_data *pdata) { - struct platform_device *pdev = NULL; - struct twl4030_client *twl = NULL; - int status = 0; + struct device *child; if (twl_has_bci() && pdata->bci) { - twl = &twl4030_modules[3]; - - pdev = platform_device_alloc("twl4030_bci", -1); - if (!pdev) { - pr_debug("%s: can't alloc bci dev\n", DRIVER_NAME); - status = -ENOMEM; - goto err; - } - - if (status == 0) { - pdev->dev.parent = &twl->client->dev; - status = platform_device_add_data(pdev, pdata->bci, - sizeof(*pdata->bci)); - if (status < 0) { - dev_dbg(&twl->client->dev, - "can't add bci data, %d\n", - status); - goto err; - } - } - - if (status == 0) { - struct resource r = { - .start = pdata->irq_base + 8 + 1, - .flags = IORESOURCE_IRQ, - }; - - status = platform_device_add_resources(pdev, &r, 1); - } - - if (status == 0) - status = platform_device_add(pdev); - - if (status < 0) { - platform_device_put(pdev); - dev_dbg(&twl->client->dev, - "can't create bci dev, %d\n", - status); - goto err; - } + child = add_child(3, "twl4030_bci", + pdata->bci, sizeof(*pdata->bci), + false, + /* irq0 = CHG_PRES, irq1 = BCI */ + pdata->irq_base + 8 + 1, pdata->irq_base + 2); + if (IS_ERR(child)) + return PTR_ERR(child); } if (twl_has_gpio() && pdata->gpio) { - twl = &twl4030_modules[1]; - - pdev = platform_device_alloc("twl4030_gpio", -1); - if (!pdev) { - pr_debug("%s: can't alloc gpio dev\n", DRIVER_NAME); - status = -ENOMEM; - goto err; - } - - /* more driver model init */ - if (status == 0) { - pdev->dev.parent = &twl->client->dev; - /* device_init_wakeup(&pdev->dev, 1); */ - - status = platform_device_add_data(pdev, pdata->gpio, - sizeof(*pdata->gpio)); - if (status < 0) { - dev_dbg(&twl->client->dev, - "can't add gpio data, %d\n", - status); - goto err; - } - } - - /* GPIO module IRQ */ - if (status == 0) { - struct resource r = { - .start = pdata->irq_base + 0, - .flags = IORESOURCE_IRQ, - }; - - status = platform_device_add_resources(pdev, &r, 1); - } - - if (status == 0) - status = platform_device_add(pdev); - - if (status < 0) { - platform_device_put(pdev); - dev_dbg(&twl->client->dev, - "can't create gpio dev, %d\n", - status); - goto err; - } + child = add_child(1, "twl4030_gpio", + pdata->gpio, sizeof(*pdata->gpio), + false, pdata->irq_base + 0, 0); + if (IS_ERR(child)) + return PTR_ERR(child); } if (twl_has_keypad() && pdata->keypad) { - pdev = platform_device_alloc("twl4030_keypad", -1); - if (pdev) { - twl = &twl4030_modules[2]; - pdev->dev.parent = &twl->client->dev; - device_init_wakeup(&pdev->dev, 1); - status = platform_device_add_data(pdev, pdata->keypad, - sizeof(*pdata->keypad)); - if (status < 0) { - dev_dbg(&twl->client->dev, - "can't add keypad data, %d\n", - status); - platform_device_put(pdev); - goto err; - } - status = platform_device_add(pdev); - if (status < 0) { - platform_device_put(pdev); - dev_dbg(&twl->client->dev, - "can't create keypad dev, %d\n", - status); - goto err; - } - } else { - pr_debug("%s: can't alloc keypad dev\n", DRIVER_NAME); - status = -ENOMEM; - goto err; - } + child = add_child(2, "twl4030_keypad", + pdata->keypad, sizeof(*pdata->keypad), + true, pdata->irq_base + 1, 0); + if (IS_ERR(child)) + return PTR_ERR(child); } if (twl_has_madc() && pdata->madc) { - pdev = platform_device_alloc("twl4030_madc", -1); - if (pdev) { - twl = &twl4030_modules[2]; - pdev->dev.parent = &twl->client->dev; - device_init_wakeup(&pdev->dev, 1); - status = platform_device_add_data(pdev, pdata->madc, - sizeof(*pdata->madc)); - if (status < 0) { - platform_device_put(pdev); - dev_dbg(&twl->client->dev, - "can't add madc data, %d\n", - status); - goto err; - } - status = platform_device_add(pdev); - if (status < 0) { - platform_device_put(pdev); - dev_dbg(&twl->client->dev, - "can't create madc dev, %d\n", - status); - goto err; - } - } else { - pr_debug("%s: can't alloc madc dev\n", DRIVER_NAME); - status = -ENOMEM; - goto err; - } + child = add_child(2, "twl4030_madc", + pdata->madc, sizeof(*pdata->madc), + true, pdata->irq_base + 3, 0); + if (IS_ERR(child)) + return PTR_ERR(child); } if (twl_has_rtc()) { - twl = &twl4030_modules[3]; - - pdev = platform_device_alloc("twl4030_rtc", -1); - if (!pdev) { - pr_debug("%s: can't alloc rtc dev\n", DRIVER_NAME); - status = -ENOMEM; - } else { - pdev->dev.parent = &twl->client->dev; - device_init_wakeup(&pdev->dev, 1); - } - /* - * REVISIT platform_data here currently might use of + * REVISIT platform_data here currently might expose the * "msecure" line ... but for now we just expect board - * setup to tell the chip "we are secure" at all times. + * setup to tell the chip "it's always ok to SET_TIME". * Eventually, Linux might become more aware of such * HW security concerns, and "least privilege". */ - - /* RTC module IRQ */ - if (status == 0) { - struct resource r = { - .start = pdata->irq_base + 8 + 3, - .flags = IORESOURCE_IRQ, - }; - - status = platform_device_add_resources(pdev, &r, 1); - } - - if (status == 0) - status = platform_device_add(pdev); - - if (status < 0) { - platform_device_put(pdev); - dev_dbg(&twl->client->dev, - "can't create rtc dev, %d\n", - status); - goto err; - } + child = add_child(3, "twl4030_rtc", + NULL, 0, + true, pdata->irq_base + 8 + 3, 0); + if (IS_ERR(child)) + return PTR_ERR(child); } if (twl_has_usb() && pdata->usb) { - twl = &twl4030_modules[0]; - - pdev = platform_device_alloc("twl4030_usb", -1); - if (!pdev) { - pr_debug("%s: can't alloc usb dev\n", DRIVER_NAME); - status = -ENOMEM; - goto err; - } - - if (status == 0) { - pdev->dev.parent = &twl->client->dev; - device_init_wakeup(&pdev->dev, 1); - status = platform_device_add_data(pdev, pdata->usb, - sizeof(*pdata->usb)); - if (status < 0) { - platform_device_put(pdev); - dev_dbg(&twl->client->dev, - "can't add usb data, %d\n", - status); - goto err; - } - } - - if (status == 0) { - struct resource r = { - .start = pdata->irq_base + 8 + 2, - .flags = IORESOURCE_IRQ, - }; - - status = platform_device_add_resources(pdev, &r, 1); - } - - if (status == 0) - status = platform_device_add(pdev); - - if (status < 0) { - platform_device_put(pdev); - dev_dbg(&twl->client->dev, - "can't create usb dev, %d\n", - status); - } + child = add_child(0, "twl4030_usb", + pdata->usb, sizeof(*pdata->usb), + true, + /* irq0 = USB_PRES, irq1 = USB */ + pdata->irq_base + 8 + 2, pdata->irq_base + 4); + if (IS_ERR(child)) + return PTR_ERR(child); } -err: - if (status) - pr_err("failed to add twl4030's children (status %d)\n", status); - return status; + return 0; } /*----------------------------------------------------------------------*/ From 67460a7c26271fd7a32e5d51b2c806a84ce78a62 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 1 Dec 2008 00:35:33 +0100 Subject: [PATCH 13/30] mfd: twl4030: cleanup symbols and OMAP dependency Finish removing dependency of TWL driver stack on platform-specific IRQ definitions ... and remove the build dependency on OMAP. This lets the TWL4030 code be included in test builds for most platforms, and will make it easier for non-OMAP folk to update most of this code for new APIs etc. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 2 +- include/linux/i2c/twl4030.h | 31 ------------------------------- 2 files changed, 1 insertion(+), 32 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 257277394f8c..8cd3dd9a69b2 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -63,7 +63,7 @@ config UCB1400_CORE config TWL4030_CORE bool "Texas Instruments TWL4030/TPS659x0 Support" - depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3) + depends on I2C=y && GENERIC_HARDIRQS help Say yes here if you have TWL4030 family chip on your board. This core driver provides register access and IRQ handling diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index ae25c907b7cf..d4846695bcd0 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -285,33 +285,6 @@ struct twl4030_platform_data { int twl4030_sih_setup(int module); -/* - * FIXME completely stop using TWL4030_IRQ_BASE ... instead, pass the - * IRQ data to subsidiary devices using platform device resources. - */ - -/* IRQ information-need base */ -#include -/* TWL4030 interrupts */ - -/* #define TWL4030_MODIRQ_GPIO (TWL4030_IRQ_BASE + 0) */ -#define TWL4030_MODIRQ_KEYPAD (TWL4030_IRQ_BASE + 1) -#define TWL4030_MODIRQ_BCI (TWL4030_IRQ_BASE + 2) -#define TWL4030_MODIRQ_MADC (TWL4030_IRQ_BASE + 3) -/* #define TWL4030_MODIRQ_USB (TWL4030_IRQ_BASE + 4) */ -/* #define TWL4030_MODIRQ_PWR (TWL4030_IRQ_BASE + 5) */ - -#define TWL4030_PWRIRQ_PWRBTN (TWL4030_PWR_IRQ_BASE + 0) -/* #define TWL4030_PWRIRQ_CHG_PRES (TWL4030_PWR_IRQ_BASE + 1) */ -/* #define TWL4030_PWRIRQ_USB_PRES (TWL4030_PWR_IRQ_BASE + 2) */ -/* #define TWL4030_PWRIRQ_RTC (TWL4030_PWR_IRQ_BASE + 3) */ -/* #define TWL4030_PWRIRQ_HOT_DIE (TWL4030_PWR_IRQ_BASE + 4) */ -/* #define TWL4030_PWRIRQ_PWROK_TIMEOUT (TWL4030_PWR_IRQ_BASE + 5) */ -/* #define TWL4030_PWRIRQ_MBCHG (TWL4030_PWR_IRQ_BASE + 6) */ -/* #define TWL4030_PWRIRQ_SC_DETECT (TWL4030_PWR_IRQ_BASE + 7) */ - -/* Rest are unsued currently*/ - /* Offsets to Power Registers */ #define TWL4030_VDAC_DEV_GRP 0x3B #define TWL4030_VDAC_DEDICATED 0x3E @@ -322,10 +295,6 @@ int twl4030_sih_setup(int module); #define TWL4030_VAUX3_DEV_GRP 0x1F #define TWL4030_VAUX3_DEDICATED 0x22 -/* TWL4030 GPIO interrupt definitions */ - -#define TWL4030_GPIO_IRQ_NO(n) (TWL4030_GPIO_IRQ_BASE + (n)) - /* * Exported TWL4030 GPIO APIs * From dad759ff8ba79927766e3f0159bfc5fb6de0f982 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 1 Dec 2008 00:43:58 +0100 Subject: [PATCH 14/30] mfd: twl4030: create some regulator devices Initial code to create twl4030 voltage regulator devices, using the new regulator framework. Note that this now starts to care what name is used to declare the TWL chip: - TWL4030 is the "old" chip; newer ones have a bigger variety of VAUX2 voltages. - TWL5030 is the core "new" chip; TPS65950 is its catalog version. - The TPS65930 and TPS65920 are cost-reduced catalog versions of TWL5030 parts ... fewer regulators, no battery charger, etc. Board-specific regulator configuration should be provided, listing which regulators are used and their constraints (e.g. 1.8V only). Code that could ("should"?) leverage the regulator stuff includes TWL4030 USB transceiver support and MMC glue, LCD support for the 3430SDP and Labrador boards, and S-Video output. Signed-off-by: David Brownell Signed-off-by: Tony Lindgren Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-core.c | 174 +++++++++++++++++++++++++++++++++--- include/linux/i2c/twl4030.h | 47 ++++++++++ 2 files changed, 211 insertions(+), 10 deletions(-) diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index f5486cce86f4..8ab9ee8543a6 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -33,6 +33,8 @@ #include #include +#include + #include #include @@ -71,6 +73,13 @@ #define twl_has_gpio() false #endif +#if defined(CONFIG_REGULATOR_TWL4030) \ + || defined(CONFIG_REGULATOR_TWL4030_MODULE) +#define twl_has_regulator() true +#else +#define twl_has_regulator() false +#endif + #if defined(CONFIG_TWL4030_MADC) || defined(CONFIG_TWL4030_MADC_MODULE) #define twl_has_madc() true #else @@ -149,6 +158,10 @@ #define HIGH_PERF_SQ (1 << 3) +/* chip-specific feature flags, for i2c_device_id.driver_data */ +#define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */ +#define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */ + /*----------------------------------------------------------------------*/ /* is driver active, bound to a chip? */ @@ -352,7 +365,8 @@ EXPORT_SYMBOL(twl4030_i2c_read_u8); /*----------------------------------------------------------------------*/ -static struct device *add_child(unsigned chip, const char *name, +static struct device * +add_numbered_child(unsigned chip, const char *name, int num, void *pdata, unsigned pdata_len, bool can_wakeup, int irq0, int irq1) { @@ -360,7 +374,7 @@ static struct device *add_child(unsigned chip, const char *name, struct twl4030_client *twl = &twl4030_modules[chip]; int status; - pdev = platform_device_alloc(name, -1); + pdev = platform_device_alloc(name, num); if (!pdev) { dev_dbg(&twl->client->dev, "can't alloc dev\n"); status = -ENOMEM; @@ -402,17 +416,52 @@ static struct device *add_child(unsigned chip, const char *name, return &pdev->dev; } +static inline struct device *add_child(unsigned chip, const char *name, + void *pdata, unsigned pdata_len, + bool can_wakeup, int irq0, int irq1) +{ + return add_numbered_child(chip, name, -1, pdata, pdata_len, + can_wakeup, irq0, irq1); +} + +static struct device * +add_regulator_linked(int num, struct regulator_init_data *pdata, + struct regulator_consumer_supply *consumers, + unsigned num_consumers) +{ + /* regulator framework demands init_data ... */ + if (!pdata) + return NULL; + + if (consumers && !pdata->consumer_supplies) { + pdata->consumer_supplies = consumers; + pdata->num_consumer_supplies = num_consumers; + } + + /* NOTE: we currently ignore regulator IRQs, e.g. for short circuits */ + return add_numbered_child(3, "twl4030_reg", num, + pdata, sizeof(*pdata), false, 0, 0); +} + +static struct device * +add_regulator(int num, struct regulator_init_data *pdata) +{ + return add_regulator_linked(num, pdata, NULL, 0); +} + /* * NOTE: We know the first 8 IRQs after pdata->base_irq are * for the PIH, and the next are for the PWR_INT SIH, since * that's how twl_init_irq() sets things up. */ -static int add_children(struct twl4030_platform_data *pdata) +static int +add_children(struct twl4030_platform_data *pdata, unsigned long features) { struct device *child; + struct device *usb_transceiver = NULL; - if (twl_has_bci() && pdata->bci) { + if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) { child = add_child(3, "twl4030_bci", pdata->bci, sizeof(*pdata->bci), false, @@ -469,6 +518,111 @@ static int add_children(struct twl4030_platform_data *pdata) pdata->irq_base + 8 + 2, pdata->irq_base + 4); if (IS_ERR(child)) return PTR_ERR(child); + + /* we need to connect regulators to this transceiver */ + usb_transceiver = child; + } + + if (twl_has_regulator()) { + /* + child = add_regulator(TWL4030_REG_VPLL1, pdata->vpll1); + if (IS_ERR(child)) + return PTR_ERR(child); + */ + + child = add_regulator(TWL4030_REG_VMMC1, pdata->vmmc1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VDAC, pdata->vdac); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator((features & TWL4030_VAUX2) + ? TWL4030_REG_VAUX2_4030 + : TWL4030_REG_VAUX2, + pdata->vaux2); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + if (twl_has_regulator() && usb_transceiver) { + static struct regulator_consumer_supply usb1v5 = { + .supply = "usb1v5", + }; + static struct regulator_consumer_supply usb1v8 = { + .supply = "usb1v8", + }; + static struct regulator_consumer_supply usb3v1 = { + .supply = "usb3v1", + }; + static struct regulator_consumer_supply usbcp = { + .supply = "usbcp", + }; + + /* this is a template that gets copied */ + struct regulator_init_data usb_fixed = { + .constraints.valid_modes_mask = + REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .constraints.valid_ops_mask = + REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }; + + usb1v5.dev = usb_transceiver; + usb1v8.dev = usb_transceiver; + usb3v1.dev = usb_transceiver; + usbcp.dev = usb_transceiver; + + child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed, + &usb1v5, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator_linked(TWL4030_REG_VUSB1V8, &usb_fixed, + &usb1v8, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator_linked(TWL4030_REG_VUSB3V1, &usb_fixed, + &usb3v1, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator_linked(TWL4030_REG_VUSBCP, &usb_fixed, + &usbcp, 1); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + /* maybe add LDOs that are omitted on cost-reduced parts */ + if (twl_has_regulator() && !(features & TPS_SUBSET)) { + /* + child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2); + if (IS_ERR(child)) + return PTR_ERR(child); + */ + + child = add_regulator(TWL4030_REG_VMMC2, pdata->vmmc2); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VSIM, pdata->vsim); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VAUX1, pdata->vaux1); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VAUX3, pdata->vaux3); + if (IS_ERR(child)) + return PTR_ERR(child); + + child = add_regulator(TWL4030_REG_VAUX4, pdata->vaux4); + if (IS_ERR(child)) + return PTR_ERR(child); } return 0; @@ -632,7 +786,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) goto fail; } - status = add_children(pdata); + status = add_children(pdata, id->driver_data); fail: if (status < 0) twl4030_remove(client); @@ -640,11 +794,11 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) } static const struct i2c_device_id twl4030_ids[] = { - { "twl4030", 0 }, /* "Triton 2" */ - { "tps65950", 0 }, /* catalog version of twl4030 */ - { "tps65930", 0 }, /* fewer LDOs and DACs; no charger */ - { "tps65920", 0 }, /* fewer LDOs; no codec or charger */ - { "twl5030", 0 }, /* T2 updated */ + { "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */ + { "twl5030", 0 }, /* T2 updated */ + { "tps65950", 0 }, /* catalog version of twl5030 */ + { "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */ + { "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */ { /* end of list */ }, }; MODULE_DEVICE_TABLE(i2c, twl4030_ids); diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index d4846695bcd0..e06555d40d35 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -278,6 +278,18 @@ struct twl4030_platform_data { struct twl4030_keypad_data *keypad; struct twl4030_usb_data *usb; + /* LDO regulators */ + struct regulator_init_data *vdac; + struct regulator_init_data *vpll1; + struct regulator_init_data *vpll2; + struct regulator_init_data *vmmc1; + struct regulator_init_data *vmmc2; + struct regulator_init_data *vsim; + struct regulator_init_data *vaux1; + struct regulator_init_data *vaux2; + struct regulator_init_data *vaux3; + struct regulator_init_data *vaux4; + /* REVISIT more to come ... _nothing_ should be hard-wired */ }; @@ -309,4 +321,39 @@ int twl4030_set_gpio_debounce(int gpio, int enable); static inline int twl4030charger_usb_en(int enable) { return 0; } #endif +/*----------------------------------------------------------------------*/ + +/* Linux-specific regulator identifiers ... for now, we only support + * the LDOs, and leave the three buck converters alone. VDD1 and VDD2 + * need to tie into hardware based voltage scaling (cpufreq etc), while + * VIO is generally fixed. + */ + +/* EXTERNAL dc-to-dc buck converters */ +#define TWL4030_REG_VDD1 0 +#define TWL4030_REG_VDD2 1 +#define TWL4030_REG_VIO 2 + +/* EXTERNAL LDOs */ +#define TWL4030_REG_VDAC 3 +#define TWL4030_REG_VPLL1 4 +#define TWL4030_REG_VPLL2 5 /* not on all chips */ +#define TWL4030_REG_VMMC1 6 +#define TWL4030_REG_VMMC2 7 /* not on all chips */ +#define TWL4030_REG_VSIM 8 /* not on all chips */ +#define TWL4030_REG_VAUX1 9 /* not on all chips */ +#define TWL4030_REG_VAUX2_4030 10 /* (twl4030-specific) */ +#define TWL4030_REG_VAUX2 11 /* (twl5030 and newer) */ +#define TWL4030_REG_VAUX3 12 /* not on all chips */ +#define TWL4030_REG_VAUX4 13 /* not on all chips */ + +/* INTERNAL LDOs */ +#define TWL4030_REG_VINTANA1 14 +#define TWL4030_REG_VINTANA2 15 +#define TWL4030_REG_VINTDIG 16 +#define TWL4030_REG_VUSB1V5 17 +#define TWL4030_REG_VUSB1V8 18 +#define TWL4030_REG_VUSB3V1 19 +#define TWL4030_REG_VUSBCP 20 + #endif /* End of __TWL4030_H */ From b73eac7871d002835be17d4602cced2c15c0db4b Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 7 Dec 2008 19:10:58 +0100 Subject: [PATCH 15/30] mfd: twl4030 regulator bug fixes This contains two bugfixes to the initial twl4030 regulator support patch related to USB: (a) always overwrite the old list of consumers ... else the regulator handles all use the same "usb1v5" name; (b) don't set up the "usbcp" regulator, which turns out to be managed through separate controls, usually ULPI directly from the OTG controller. Signed-off-by: David Brownell Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-core.c | 11 +---------- include/linux/i2c/twl4030.h | 1 - 2 files changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index 8ab9ee8543a6..fdfbd313ae09 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -433,7 +433,7 @@ add_regulator_linked(int num, struct regulator_init_data *pdata, if (!pdata) return NULL; - if (consumers && !pdata->consumer_supplies) { + if (consumers) { pdata->consumer_supplies = consumers; pdata->num_consumer_supplies = num_consumers; } @@ -556,9 +556,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) static struct regulator_consumer_supply usb3v1 = { .supply = "usb3v1", }; - static struct regulator_consumer_supply usbcp = { - .supply = "usbcp", - }; /* this is a template that gets copied */ struct regulator_init_data usb_fixed = { @@ -573,7 +570,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) usb1v5.dev = usb_transceiver; usb1v8.dev = usb_transceiver; usb3v1.dev = usb_transceiver; - usbcp.dev = usb_transceiver; child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed, &usb1v5, 1); @@ -589,11 +585,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features) &usb3v1, 1); if (IS_ERR(child)) return PTR_ERR(child); - - child = add_regulator_linked(TWL4030_REG_VUSBCP, &usb_fixed, - &usbcp, 1); - if (IS_ERR(child)) - return PTR_ERR(child); } /* maybe add LDOs that are omitted on cost-reduced parts */ diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index e06555d40d35..a8f84c01f82e 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -354,6 +354,5 @@ int twl4030_set_gpio_debounce(int gpio, int enable); #define TWL4030_REG_VUSB1V5 17 #define TWL4030_REG_VUSB1V8 18 #define TWL4030_REG_VUSB3V1 19 -#define TWL4030_REG_VUSBCP 20 #endif /* End of __TWL4030_H */ From 6354ab5c63bc986bf539026a1b289cc142f6e87c Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Sun, 7 Dec 2008 20:50:25 +0100 Subject: [PATCH 16/30] mfd: Fix twl4030-core.c build error This is a fix for: twl4030-core.c:(.text+0x16a797): undefined reference to `clk_get_rate' twl4030-core.c:(.text+0x16a797): undefined reference to `clk_put' on x86 and x86_64, as the clock API is not defined on those platforms. Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-core.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index fdfbd313ae09..b59c385cbc12 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -658,12 +658,7 @@ static void __init clocks_init(void) osc = clk_get(NULL, "osc_ck"); else osc = clk_get(NULL, "osc_sys_ck"); -#else - /* REVISIT for non-OMAP systems, pass the clock rate from - * board init code, using platform_data. - */ - osc = ERR_PTR(-EIO); -#endif + if (IS_ERR(osc)) { printk(KERN_WARNING "Skipping twl4030 internal clock init and " "using bootloader value (unknown osc rate)\n"); @@ -673,6 +668,18 @@ static void __init clocks_init(void) rate = clk_get_rate(osc); clk_put(osc); +#else + /* REVISIT for non-OMAP systems, pass the clock rate from + * board init code, using platform_data. + */ + osc = ERR_PTR(-EIO); + + printk(KERN_WARNING "Skipping twl4030 internal clock init and " + "using bootloader value (unknown osc rate)\n"); + + return; +#endif + switch (rate) { case 19200000: ctrl = HFCLK_FREQ_19p2_MHZ; From 44faac3155247d9cb9aec5a53832014e1f807c78 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 18 Dec 2008 10:54:12 +0100 Subject: [PATCH 17/30] mfd: Pass driver_data onto child devices The MFD cell structure provides a driver_data field but doesn't pass it on to the child devices when instantiating them - do that. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/mfd-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 6c0d1bec4b76..54ddf3772e0c 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -34,6 +34,7 @@ static int mfd_add_device(struct device *parent, int id, goto fail_device; pdev->dev.parent = parent; + platform_set_drvdata(pdev, cell->driver_data); ret = platform_device_add_data(pdev, cell->platform_data, cell->data_size); From b8380c1a661f1f853418ff2eb798f27a11cade57 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 18 Dec 2008 10:54:22 +0100 Subject: [PATCH 18/30] mfd: Register WM8400 codec device Register a child device for the codec in the WM8400. Also switch the unregistration of the MFD devices to use the MFD core since the current code is hand rolling the same thing. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 1 + drivers/mfd/wm8400-core.c | 31 +++++++++++++++++++++++++------ 2 files changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 8cd3dd9a69b2..ddfb12b52f54 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -116,6 +116,7 @@ config PMIC_DA903X config MFD_WM8400 tristate "Support Wolfson Microelectronics WM8400" + select MFD_CORE depends on I2C help Support for the Wolfson Microelecronics WM8400 PMIC and audio diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c index 6a0cedb5bb8a..cf30d06a0104 100644 --- a/drivers/mfd/wm8400-core.c +++ b/drivers/mfd/wm8400-core.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include @@ -239,6 +240,16 @@ void wm8400_reset_codec_reg_cache(struct wm8400 *wm8400) } EXPORT_SYMBOL_GPL(wm8400_reset_codec_reg_cache); +static int wm8400_register_codec(struct wm8400 *wm8400) +{ + struct mfd_cell cell = { + .name = "wm8400-codec", + .driver_data = wm8400, + }; + + return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0); +} + /* * wm8400_init - Generic initialisation * @@ -296,24 +307,32 @@ static int wm8400_init(struct wm8400 *wm8400, reg = (reg & WM8400_CHIP_REV_MASK) >> WM8400_CHIP_REV_SHIFT; dev_info(wm8400->dev, "WM8400 revision %x\n", reg); + ret = wm8400_register_codec(wm8400); + if (ret != 0) { + dev_err(wm8400->dev, "Failed to register codec\n"); + goto err_children; + } + if (pdata && pdata->platform_init) { ret = pdata->platform_init(wm8400->dev); - if (ret != 0) + if (ret != 0) { dev_err(wm8400->dev, "Platform init failed: %d\n", ret); + goto err_children; + } } else dev_warn(wm8400->dev, "No platform initialisation supplied\n"); + return 0; + +err_children: + mfd_remove_devices(wm8400->dev); return ret; } static void wm8400_release(struct wm8400 *wm8400) { - int i; - - for (i = 0; i < ARRAY_SIZE(wm8400->regulators); i++) - if (wm8400->regulators[i].name) - platform_device_unregister(&wm8400->regulators[i]); + mfd_remove_devices(wm8400->dev); } #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) From 856f6fd119411d5701d5db96e1aae1dd69923887 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 18 Dec 2008 10:54:27 +0100 Subject: [PATCH 19/30] mfd: Dialog DA9030 battery charger MFD driver This patch amends DA903x MFD driver with definitions and methods needed for battery charger driver. Signed-off-by: Mike Rapoport Signed-off-by: Samuel Ortiz --- drivers/mfd/da903x.c | 12 +++++++++++ include/linux/mfd/da903x.h | 44 ++++++++++++++++++++++++++++++++++++-- 2 files changed, 54 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index 0b5bd85dfcec..fcaf1f6028dd 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -151,12 +151,24 @@ int da903x_write(struct device *dev, int reg, uint8_t val) } EXPORT_SYMBOL_GPL(da903x_write); +int da903x_writes(struct device *dev, int reg, int len, uint8_t *val) +{ + return __da903x_writes(to_i2c_client(dev), reg, len, val); +} +EXPORT_SYMBOL_GPL(da903x_writes); + int da903x_read(struct device *dev, int reg, uint8_t *val) { return __da903x_read(to_i2c_client(dev), reg, val); } EXPORT_SYMBOL_GPL(da903x_read); +int da903x_reads(struct device *dev, int reg, int len, uint8_t *val) +{ + return __da903x_reads(to_i2c_client(dev), reg, len, val); +} +EXPORT_SYMBOL_GPL(da903x_reads); + int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask) { struct da903x_chip *chip = dev_get_drvdata(dev); diff --git a/include/linux/mfd/da903x.h b/include/linux/mfd/da903x.h index cad314c12439..115dbe965082 100644 --- a/include/linux/mfd/da903x.h +++ b/include/linux/mfd/da903x.h @@ -32,6 +32,7 @@ enum { DA9030_ID_LDO18, DA9030_ID_LDO19, DA9030_ID_LDO_INT, /* LDO Internal */ + DA9030_ID_BAT, /* battery charger */ DA9034_ID_LED_1, DA9034_ID_LED_2, @@ -93,6 +94,43 @@ struct da9034_touch_pdata { int y_inverted; }; +/* DA9030 battery charger data */ +struct power_supply_info; + +struct da9030_battery_info { + /* battery parameters */ + struct power_supply_info *battery_info; + + /* current and voltage to use for battery charging */ + unsigned int charge_milliamp; + unsigned int charge_millivolt; + + /* voltage thresholds (in millivolts) */ + int vbat_low; + int vbat_crit; + int vbat_charge_start; + int vbat_charge_stop; + int vbat_charge_restart; + + /* battery nominal minimal and maximal voltages in millivolts */ + int vcharge_min; + int vcharge_max; + + /* Temperature thresholds. These are DA9030 register values + "as is" and should be measured for each battery type */ + int tbat_low; + int tbat_high; + int tbat_restart; + + + /* battery monitor interval (seconds) */ + unsigned int batmon_interval; + + /* platform callbacks for battery low and critical events */ + void (*battery_low)(void); + void (*battery_critical)(void); +}; + struct da903x_subdev_info { int id; const char *name; @@ -190,11 +228,13 @@ extern int da903x_unregister_notifier(struct device *dev, extern int da903x_query_status(struct device *dev, unsigned int status); -/* NOTE: the two functions below are not intended for use outside - * of the DA9034 sub-device drivers +/* NOTE: the functions below are not intended for use outside + * of the DA903x sub-device drivers */ extern int da903x_write(struct device *dev, int reg, uint8_t val); +extern int da903x_writes(struct device *dev, int reg, int len, uint8_t *val); extern int da903x_read(struct device *dev, int reg, uint8_t *val); +extern int da903x_reads(struct device *dev, int reg, int len, uint8_t *val); extern int da903x_update(struct device *dev, int reg, uint8_t val, uint8_t mask); extern int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask); extern int da903x_clr_bits(struct device *dev, int reg, uint8_t bit_mask); From 342d765e011f9cbe4292119a9164f76ccf0b922a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Tue, 30 Dec 2008 22:44:53 +0100 Subject: [PATCH 20/30] power_supply: Add Dialog DA9030 battery charger driver Driver for battery charger integrated into Dialog Semiconductor DA9030 PMIC Signed-off-by: Mike Rapoport Acked-by: Anton Vorontsov Signed-off-by: Samuel Ortiz --- drivers/power/Kconfig | 7 + drivers/power/Makefile | 1 + drivers/power/da9030_battery.c | 600 +++++++++++++++++++++++++++++++++ 3 files changed, 608 insertions(+) create mode 100644 drivers/power/da9030_battery.c diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 52f86767f72e..668472405a57 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -75,4 +75,11 @@ config BATTERY_BQ27x00 help Say Y here to enable support for batteries with BQ27200(I2C) chip. +config BATTERY_DA9030 + tristate "DA9030 battery driver" + depends on PMIC_DA903X + help + Say Y here to enable support for batteries charger integrated into + DA9030 PMIC. + endif # POWER_SUPPLY diff --git a/drivers/power/Makefile b/drivers/power/Makefile index e6f68655d9e8..eebb15505a40 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o +obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o diff --git a/drivers/power/da9030_battery.c b/drivers/power/da9030_battery.c new file mode 100644 index 000000000000..1662bb0f23a5 --- /dev/null +++ b/drivers/power/da9030_battery.c @@ -0,0 +1,600 @@ +/* + * Battery charger driver for Dialog Semiconductor DA9030 + * + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define DA9030_STATUS_CHDET (1 << 3) + +#define DA9030_FAULT_LOG 0x0a +#define DA9030_FAULT_LOG_OVER_TEMP (1 << 7) +#define DA9030_FAULT_LOG_VBAT_OVER (1 << 4) + +#define DA9030_CHARGE_CONTROL 0x28 +#define DA9030_CHRG_CHARGER_ENABLE (1 << 7) + +#define DA9030_ADC_MAN_CONTROL 0x30 +#define DA9030_ADC_TBATREF_ENABLE (1 << 5) +#define DA9030_ADC_LDO_INT_ENABLE (1 << 4) + +#define DA9030_ADC_AUTO_CONTROL 0x31 +#define DA9030_ADC_TBAT_ENABLE (1 << 5) +#define DA9030_ADC_VBAT_IN_TXON (1 << 4) +#define DA9030_ADC_VCH_ENABLE (1 << 3) +#define DA9030_ADC_ICH_ENABLE (1 << 2) +#define DA9030_ADC_VBAT_ENABLE (1 << 1) +#define DA9030_ADC_AUTO_SLEEP_ENABLE (1 << 0) + +#define DA9030_VBATMON 0x32 +#define DA9030_VBATMONTXON 0x33 +#define DA9030_TBATHIGHP 0x34 +#define DA9030_TBATHIGHN 0x35 +#define DA9030_TBATLOW 0x36 + +#define DA9030_VBAT_RES 0x41 +#define DA9030_VBATMIN_RES 0x42 +#define DA9030_VBATMINTXON_RES 0x43 +#define DA9030_ICHMAX_RES 0x44 +#define DA9030_ICHMIN_RES 0x45 +#define DA9030_ICHAVERAGE_RES 0x46 +#define DA9030_VCHMAX_RES 0x47 +#define DA9030_VCHMIN_RES 0x48 +#define DA9030_TBAT_RES 0x49 + +struct da9030_adc_res { + uint8_t vbat_res; + uint8_t vbatmin_res; + uint8_t vbatmintxon; + uint8_t ichmax_res; + uint8_t ichmin_res; + uint8_t ichaverage_res; + uint8_t vchmax_res; + uint8_t vchmin_res; + uint8_t tbat_res; + uint8_t adc_in4_res; + uint8_t adc_in5_res; +}; + +struct da9030_battery_thresholds { + int tbat_low; + int tbat_high; + int tbat_restart; + + int vbat_low; + int vbat_crit; + int vbat_charge_start; + int vbat_charge_stop; + int vbat_charge_restart; + + int vcharge_min; + int vcharge_max; +}; + +struct da9030_charger { + struct power_supply psy; + + struct device *master; + + struct da9030_adc_res adc; + struct delayed_work work; + unsigned int interval; + + struct power_supply_info *battery_info; + + struct da9030_battery_thresholds thresholds; + + unsigned int charge_milliamp; + unsigned int charge_millivolt; + + /* charger status */ + bool chdet; + uint8_t fault; + int mA; + int mV; + bool is_on; + + struct notifier_block nb; + + /* platform callbacks for battery low and critical events */ + void (*battery_low)(void); + void (*battery_critical)(void); + + struct dentry *debug_file; +}; + +static inline int da9030_reg_to_mV(int reg) +{ + return ((reg * 2650) >> 8) + 2650; +} + +static inline int da9030_millivolt_to_reg(int mV) +{ + return ((mV - 2650) << 8) / 2650; +} + +static inline int da9030_reg_to_mA(int reg) +{ + return ((reg * 24000) >> 8) / 15; +} + +#ifdef CONFIG_DEBUG_FS +static int bat_debug_show(struct seq_file *s, void *data) +{ + struct da9030_charger *charger = s->private; + + seq_printf(s, "charger is %s\n", charger->is_on ? "on" : "off"); + if (charger->chdet) { + seq_printf(s, "iset = %dmA, vset = %dmV\n", + charger->mA, charger->mV); + } + + seq_printf(s, "vbat_res = %d (%dmV)\n", + charger->adc.vbat_res, + da9030_reg_to_mV(charger->adc.vbat_res)); + seq_printf(s, "vbatmin_res = %d (%dmV)\n", + charger->adc.vbatmin_res, + da9030_reg_to_mV(charger->adc.vbatmin_res)); + seq_printf(s, "vbatmintxon = %d (%dmV)\n", + charger->adc.vbatmintxon, + da9030_reg_to_mV(charger->adc.vbatmintxon)); + seq_printf(s, "ichmax_res = %d (%dmA)\n", + charger->adc.ichmax_res, + da9030_reg_to_mV(charger->adc.ichmax_res)); + seq_printf(s, "ichmin_res = %d (%dmA)\n", + charger->adc.ichmin_res, + da9030_reg_to_mA(charger->adc.ichmin_res)); + seq_printf(s, "ichaverage_res = %d (%dmA)\n", + charger->adc.ichaverage_res, + da9030_reg_to_mA(charger->adc.ichaverage_res)); + seq_printf(s, "vchmax_res = %d (%dmV)\n", + charger->adc.vchmax_res, + da9030_reg_to_mA(charger->adc.vchmax_res)); + seq_printf(s, "vchmin_res = %d (%dmV)\n", + charger->adc.vchmin_res, + da9030_reg_to_mV(charger->adc.vchmin_res)); + + return 0; +} + +static int debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, bat_debug_show, inode->i_private); +} + +static const struct file_operations bat_debug_fops = { + .open = debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger) +{ + charger->debug_file = debugfs_create_file("charger", 0666, 0, charger, + &bat_debug_fops); + return charger->debug_file; +} + +static void da9030_bat_remove_debugfs(struct da9030_charger *charger) +{ + debugfs_remove(charger->debug_file); +} +#else +static inline struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger) +{ + return NULL; +} +static inline void da9030_bat_remove_debugfs(struct da9030_charger *charger) +{ +} +#endif + +static inline void da9030_read_adc(struct da9030_charger *charger, + struct da9030_adc_res *adc) +{ + da903x_reads(charger->master, DA9030_VBAT_RES, + sizeof(*adc), (uint8_t *)adc); +} + +static void da9030_charger_update_state(struct da9030_charger *charger) +{ + uint8_t val; + + da903x_read(charger->master, DA9030_CHARGE_CONTROL, &val); + charger->is_on = (val & DA9030_CHRG_CHARGER_ENABLE) ? 1 : 0; + charger->mA = ((val >> 3) & 0xf) * 100; + charger->mV = (val & 0x7) * 50 + 4000; + + da9030_read_adc(charger, &charger->adc); + da903x_read(charger->master, DA9030_FAULT_LOG, &charger->fault); + charger->chdet = da903x_query_status(charger->master, + DA9030_STATUS_CHDET); +} + +static void da9030_set_charge(struct da9030_charger *charger, int on) +{ + uint8_t val; + + if (on) { + val = DA9030_CHRG_CHARGER_ENABLE; + val |= (charger->charge_milliamp / 100) << 3; + val |= (charger->charge_millivolt - 4000) / 50; + charger->is_on = 1; + } else { + val = 0; + charger->is_on = 0; + } + + da903x_write(charger->master, DA9030_CHARGE_CONTROL, val); +} + +static void da9030_charger_check_state(struct da9030_charger *charger) +{ + da9030_charger_update_state(charger); + + /* we wake or boot with external power on */ + if (!charger->is_on) { + if ((charger->chdet) && + (charger->adc.vbat_res < + charger->thresholds.vbat_charge_start)) { + da9030_set_charge(charger, 1); + } + } else { + if (charger->adc.vbat_res >= + charger->thresholds.vbat_charge_stop) { + da9030_set_charge(charger, 0); + da903x_write(charger->master, DA9030_VBATMON, + charger->thresholds.vbat_charge_restart); + } else if (charger->adc.vbat_res > + charger->thresholds.vbat_low) { + /* we are charging and passed LOW_THRESH, + so upate DA9030 VBAT threshold + */ + da903x_write(charger->master, DA9030_VBATMON, + charger->thresholds.vbat_low); + } + if (charger->adc.vchmax_res > charger->thresholds.vcharge_max || + charger->adc.vchmin_res < charger->thresholds.vcharge_min || + /* Tempreture readings are negative */ + charger->adc.tbat_res < charger->thresholds.tbat_high || + charger->adc.tbat_res > charger->thresholds.tbat_low) { + /* disable charger */ + da9030_set_charge(charger, 0); + } + } +} + +static void da9030_charging_monitor(struct work_struct *work) +{ + struct da9030_charger *charger; + + charger = container_of(work, struct da9030_charger, work.work); + + da9030_charger_check_state(charger); + + /* reschedule for the next time */ + schedule_delayed_work(&charger->work, charger->interval); +} + +static enum power_supply_property da9030_battery_props[] = { + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_AVG, +}; + +static void da9030_battery_check_status(struct da9030_charger *charger, + union power_supply_propval *val) +{ + if (charger->chdet) { + if (charger->is_on) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + } else { + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + } +} + +static void da9030_battery_check_health(struct da9030_charger *charger, + union power_supply_propval *val) +{ + if (charger->fault & DA9030_FAULT_LOG_OVER_TEMP) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else if (charger->fault & DA9030_FAULT_LOG_VBAT_OVER) + val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; +} + +static int da9030_battery_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct da9030_charger *charger; + charger = container_of(psy, struct da9030_charger, psy); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + da9030_battery_check_status(charger, val); + break; + case POWER_SUPPLY_PROP_HEALTH: + da9030_battery_check_health(charger, val); + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = charger->battery_info->technology; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + val->intval = charger->battery_info->voltage_max_design; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = charger->battery_info->voltage_min_design; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = da9030_reg_to_mV(charger->adc.vbat_res) * 1000; + break; + case POWER_SUPPLY_PROP_CURRENT_AVG: + val->intval = + da9030_reg_to_mA(charger->adc.ichaverage_res) * 1000; + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = charger->battery_info->name; + break; + default: + break; + } + + return 0; +} + +static void da9030_battery_vbat_event(struct da9030_charger *charger) +{ + da9030_read_adc(charger, &charger->adc); + + if (charger->is_on) + return; + + if (charger->adc.vbat_res < charger->thresholds.vbat_low) { + /* set VBAT threshold for critical */ + da903x_write(charger->master, DA9030_VBATMON, + charger->thresholds.vbat_crit); + if (charger->battery_low) + charger->battery_low(); + } else if (charger->adc.vbat_res < + charger->thresholds.vbat_crit) { + /* notify the system of battery critical */ + if (charger->battery_critical) + charger->battery_critical(); + } +} + +static int da9030_battery_event(struct notifier_block *nb, unsigned long event, + void *data) +{ + struct da9030_charger *charger = + container_of(nb, struct da9030_charger, nb); + int status; + + switch (event) { + case DA9030_EVENT_CHDET: + status = da903x_query_status(charger->master, + DA9030_STATUS_CHDET); + da9030_set_charge(charger, status); + break; + case DA9030_EVENT_VBATMON: + da9030_battery_vbat_event(charger); + break; + case DA9030_EVENT_CHIOVER: + case DA9030_EVENT_TBAT: + da9030_set_charge(charger, 0); + break; + } + + return 0; +} + +static void da9030_battery_convert_thresholds(struct da9030_charger *charger, + struct da9030_battery_info *pdata) +{ + charger->thresholds.tbat_low = pdata->tbat_low; + charger->thresholds.tbat_high = pdata->tbat_high; + charger->thresholds.tbat_restart = pdata->tbat_restart; + + charger->thresholds.vbat_low = + da9030_millivolt_to_reg(pdata->vbat_low); + charger->thresholds.vbat_crit = + da9030_millivolt_to_reg(pdata->vbat_crit); + charger->thresholds.vbat_charge_start = + da9030_millivolt_to_reg(pdata->vbat_charge_start); + charger->thresholds.vbat_charge_stop = + da9030_millivolt_to_reg(pdata->vbat_charge_stop); + charger->thresholds.vbat_charge_restart = + da9030_millivolt_to_reg(pdata->vbat_charge_restart); + + charger->thresholds.vcharge_min = + da9030_millivolt_to_reg(pdata->vcharge_min); + charger->thresholds.vcharge_max = + da9030_millivolt_to_reg(pdata->vcharge_max); +} + +static void da9030_battery_setup_psy(struct da9030_charger *charger) +{ + struct power_supply *psy = &charger->psy; + struct power_supply_info *info = charger->battery_info; + + psy->name = info->name; + psy->use_for_apm = info->use_for_apm; + psy->type = POWER_SUPPLY_TYPE_BATTERY; + psy->get_property = da9030_battery_get_property; + + psy->properties = da9030_battery_props; + psy->num_properties = ARRAY_SIZE(da9030_battery_props); +}; + +static int da9030_battery_charger_init(struct da9030_charger *charger) +{ + char v[5]; + int ret; + + v[0] = v[1] = charger->thresholds.vbat_low; + v[2] = charger->thresholds.tbat_high; + v[3] = charger->thresholds.tbat_restart; + v[4] = charger->thresholds.tbat_low; + + ret = da903x_writes(charger->master, DA9030_VBATMON, 5, v); + if (ret) + return ret; + + /* + * Enable reference voltage supply for ADC from the LDO_INTERNAL + * regulator. Must be set before ADC measurements can be made. + */ + ret = da903x_write(charger->master, DA9030_ADC_MAN_CONTROL, + DA9030_ADC_LDO_INT_ENABLE | + DA9030_ADC_TBATREF_ENABLE); + if (ret) + return ret; + + /* enable auto ADC measuremnts */ + return da903x_write(charger->master, DA9030_ADC_AUTO_CONTROL, + DA9030_ADC_TBAT_ENABLE | DA9030_ADC_VBAT_IN_TXON | + DA9030_ADC_VCH_ENABLE | DA9030_ADC_ICH_ENABLE | + DA9030_ADC_VBAT_ENABLE | + DA9030_ADC_AUTO_SLEEP_ENABLE); +} + +static int da9030_battery_probe(struct platform_device *pdev) +{ + struct da9030_charger *charger; + struct da9030_battery_info *pdata = pdev->dev.platform_data; + int ret; + + if (pdata == NULL) + return -EINVAL; + + if (pdata->charge_milliamp >= 1500 || + pdata->charge_millivolt < 4000 || + pdata->charge_millivolt > 4350) + return -EINVAL; + + charger = kzalloc(sizeof(*charger), GFP_KERNEL); + if (charger == NULL) + return -ENOMEM; + + charger->master = pdev->dev.parent; + + /* 10 seconds between monotor runs unless platfrom defines other + interval */ + charger->interval = msecs_to_jiffies( + (pdata->batmon_interval ? : 10) * 1000); + + charger->charge_milliamp = pdata->charge_milliamp; + charger->charge_millivolt = pdata->charge_millivolt; + charger->battery_info = pdata->battery_info; + charger->battery_low = pdata->battery_low; + charger->battery_critical = pdata->battery_critical; + + da9030_battery_convert_thresholds(charger, pdata); + + ret = da9030_battery_charger_init(charger); + if (ret) + goto err_charger_init; + + INIT_DELAYED_WORK(&charger->work, da9030_charging_monitor); + schedule_delayed_work(&charger->work, charger->interval); + + charger->nb.notifier_call = da9030_battery_event; + ret = da903x_register_notifier(charger->master, &charger->nb, + DA9030_EVENT_CHDET | + DA9030_EVENT_VBATMON | + DA9030_EVENT_CHIOVER | + DA9030_EVENT_TBAT); + if (ret) + goto err_notifier; + + da9030_battery_setup_psy(charger); + ret = power_supply_register(&pdev->dev, &charger->psy); + if (ret) + goto err_ps_register; + + charger->debug_file = da9030_bat_create_debugfs(charger); + platform_set_drvdata(pdev, charger); + return 0; + +err_ps_register: + da903x_unregister_notifier(charger->master, &charger->nb, + DA9030_EVENT_CHDET | DA9030_EVENT_VBATMON | + DA9030_EVENT_CHIOVER | DA9030_EVENT_TBAT); +err_notifier: + cancel_delayed_work(&charger->work); + +err_charger_init: + kfree(charger); + + return ret; +} + +static int da9030_battery_remove(struct platform_device *dev) +{ + struct da9030_charger *charger = platform_get_drvdata(dev); + + da9030_bat_remove_debugfs(charger); + + da903x_unregister_notifier(charger->master, &charger->nb, + DA9030_EVENT_CHDET | DA9030_EVENT_VBATMON | + DA9030_EVENT_CHIOVER | DA9030_EVENT_TBAT); + cancel_delayed_work(&charger->work); + power_supply_unregister(&charger->psy); + + kfree(charger); + + return 0; +} + +static struct platform_driver da903x_battery_driver = { + .driver = { + .name = "da903x-battery", + .owner = THIS_MODULE, + }, + .probe = da9030_battery_probe, + .remove = da9030_battery_remove, +}; + +static int da903x_battery_init(void) +{ + return platform_driver_register(&da903x_battery_driver); +} + +static void da903x_battery_exit(void) +{ + platform_driver_unregister(&da903x_battery_driver); +} + +module_init(da903x_battery_init); +module_exit(da903x_battery_exit); + +MODULE_DESCRIPTION("DA9030 battery charger driver"); +MODULE_AUTHOR("Mike Rapoport, CompuLab"); +MODULE_LICENSE("GPL"); From 94964f96a6b7018d68b7386cd8c0b8505d3cf69f Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 18 Dec 2008 11:38:02 +0100 Subject: [PATCH 21/30] mfd: Use irq_to_desc in twl4030 code The global irq_desc array is soon going to be accessible only with !CONFIG_SPARSE_IRQ. We should start using the generic irq_to_desc() routines instead. Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-irq.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index fae868a8d499..b10876036983 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -180,10 +180,15 @@ static struct completion irq_event; static int twl4030_irq_thread(void *data) { long irq = (long)data; - irq_desc_t *desc = irq_desc + irq; + struct irq_desc *desc = irq_to_desc(irq); static unsigned i2c_errors; const static unsigned max_i2c_errors = 100; + if (!desc) { + pr_err("twl4030: Invalid IRQ: %ld\n", irq); + return -EINVAL; + } + current->flags |= PF_NOFREEZE; while (!kthread_should_stop()) { @@ -215,7 +220,13 @@ static int twl4030_irq_thread(void *data) pih_isr; pih_isr >>= 1, module_irq++) { if (pih_isr & 0x1) { - irq_desc_t *d = irq_desc + module_irq; + struct irq_desc *d = irq_to_desc(module_irq); + + if (!d) { + pr_err("twl4030: Invalid SIH IRQ: %d\n", + module_irq); + return -EINVAL; + } /* These can't be masked ... always warn * if we get any surprises. @@ -452,10 +463,16 @@ static void twl4030_sih_do_edge(struct work_struct *work) /* Modify only the bits we know must change */ while (edge_change) { int i = fls(edge_change) - 1; - struct irq_desc *d = irq_desc + i + agent->irq_base; + struct irq_desc *d = irq_to_desc(i + agent->irq_base); int byte = 1 + (i >> 2); int off = (i & 0x3) * 2; + if (!d) { + pr_err("twl4030: Invalid IRQ: %d\n", + i + agent->irq_base); + return; + } + bytes[byte] &= ~(0x03 << off); spin_lock_irq(&d->lock); @@ -512,9 +529,14 @@ static void twl4030_sih_unmask(unsigned irq) static int twl4030_sih_set_type(unsigned irq, unsigned trigger) { struct sih_agent *sih = get_irq_chip_data(irq); - struct irq_desc *desc = irq_desc + irq; + struct irq_desc *desc = irq_to_desc(irq); unsigned long flags; + if (!desc) { + pr_err("twl4030: Invalid IRQ: %d\n", irq); + return -EINVAL; + } + if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) return -EINVAL; From 96920630624868add3f63f596523e70dbb64549a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 18 Dec 2008 23:09:50 +0100 Subject: [PATCH 22/30] mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 16 + drivers/mfd/wm8350-core.c | 86 ++- drivers/mfd/wm8350-i2c.c | 1 + drivers/mfd/wm8350-regmap.c | 1052 +++++++++++++++++++++++++++++++ include/linux/mfd/wm8350/core.h | 4 + 5 files changed, 1143 insertions(+), 16 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ddfb12b52f54..76a482dfc177 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -143,6 +143,22 @@ config MFD_WM8350_CONFIG_MODE_3 bool depends on MFD_WM8350 +config MFD_WM8352_CONFIG_MODE_0 + bool + depends on MFD_WM8350 + +config MFD_WM8352_CONFIG_MODE_1 + bool + depends on MFD_WM8350 + +config MFD_WM8352_CONFIG_MODE_2 + bool + depends on MFD_WM8350 + +config MFD_WM8352_CONFIG_MODE_3 + bool + depends on MFD_WM8350 + config MFD_WM8350_I2C tristate "Support Wolfson Microelectronics WM8350 with I2C" select MFD_WM8350 diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 2188d759cbde..fa505ac76c84 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1133,35 +1133,75 @@ EXPORT_SYMBOL_GPL(wm8350_read_auxadc); /* * Cache is always host endian. */ -static int wm8350_create_cache(struct wm8350 *wm8350, int mode) +static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode) { int i, ret = 0; u16 value; const u16 *reg_map; - switch (mode) { -#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0 + switch (type) { case 0: - reg_map = wm8350_mode0_defaults; - break; + switch (mode) { +#ifdef CONFIG_MFD_WM8350_CONFIG_MODE_0 + case 0: + reg_map = wm8350_mode0_defaults; + break; #endif #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_1 - case 1: - reg_map = wm8350_mode1_defaults; - break; + case 1: + reg_map = wm8350_mode1_defaults; + break; #endif #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_2 - case 2: - reg_map = wm8350_mode2_defaults; - break; + case 2: + reg_map = wm8350_mode2_defaults; + break; #endif #ifdef CONFIG_MFD_WM8350_CONFIG_MODE_3 - case 3: - reg_map = wm8350_mode3_defaults; - break; + case 3: + reg_map = wm8350_mode3_defaults; + break; #endif + default: + dev_err(wm8350->dev, + "WM8350 configuration mode %d not supported\n", + mode); + return -EINVAL; + } + + case 2: + switch (mode) { +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0 + case 0: + reg_map = wm8352_mode0_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1 + case 1: + reg_map = wm8352_mode1_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2 + case 2: + reg_map = wm8352_mode2_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3 + case 3: + reg_map = wm8352_mode3_defaults; + break; +#endif + default: + dev_err(wm8350->dev, + "WM8352 configuration mode %d not supported\n", + mode); + return -EINVAL; + } + break; + default: - dev_err(wm8350->dev, "Configuration mode %d not supported\n", + dev_err(wm8350->dev, + "WM835x configuration mode %d not supported\n", mode); return -EINVAL; } @@ -1284,13 +1324,27 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, } break; + case 2: + switch (chip_rev) { + case 0: + dev_info(wm8350->dev, "WM8352 Rev A\n"); + wm8350->power.rev_g_coeff = 1; + break; + + default: + dev_err(wm8350->dev, "Unknown WM8352 CHIP_REV\n"); + ret = -ENODEV; + goto err; + } + break; + default: dev_err(wm8350->dev, "Unknown MASK_REV\n"); ret = -ENODEV; goto err; } - ret = wm8350_create_cache(wm8350, mode); + ret = wm8350_create_cache(wm8350, mask_rev, mode); if (ret < 0) { dev_err(wm8350->dev, "Failed to create register cache\n"); return ret; diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c index 876e693582bd..878051253084 100644 --- a/drivers/mfd/wm8350-i2c.c +++ b/drivers/mfd/wm8350-i2c.c @@ -97,6 +97,7 @@ static int wm8350_i2c_remove(struct i2c_client *i2c) static const struct i2c_device_id wm8350_i2c_id[] = { { "wm8350", 0 }, + { "wm8352", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, wm8350_i2c_id); diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c index b43d64c2b920..3e2cc37961f3 100644 --- a/drivers/mfd/wm8350-regmap.c +++ b/drivers/mfd/wm8350-regmap.c @@ -1074,6 +1074,1058 @@ const u16 wm8350_mode3_defaults[] = { }; #endif +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8352_mode0_defaults[] = { + 0x6143, /* R0 - Reset/ID */ + 0x0000, /* R1 - ID */ + 0x0002, /* R2 - Revision */ + 0x1C02, /* R3 - System Control 1 */ + 0x0004, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3A00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - OUT1L Volume */ + 0x00E4, /* R105 - OUT1R Volume */ + 0x00E4, /* R106 - OUT2L Volume */ + 0x02E4, /* R107 - OUT2R Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0000, /* R129 - GPIO Pin pull up Control */ + 0x0000, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x0FFC, /* R134 - GPIO Configuration (i/o) */ + 0x0FFC, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x0013, /* R140 - GPIO Function Select 1 */ + 0x0000, /* R141 - GPIO Function Select 2 */ + 0x0000, /* R142 - GPIO Function Select 3 */ + 0x0003, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 - Current Sink Driver B */ + 0x0000, /* R175 - CSB Flash control */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x032D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x000E, /* R180 - DCDC1 Control */ + 0x0000, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x0000, /* R186 - DCDC3 Control */ + 0x0000, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x0000, /* R189 - DCDC4 Control */ + 0x0000, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 - DCDC5 Control */ + 0x0000, /* R193 - DCDC5 Timeouts */ + 0x0000, /* R194 */ + 0x0000, /* R195 - DCDC6 Control */ + 0x0000, /* R196 - DCDC6 Timeouts */ + 0x0006, /* R197 - DCDC6 Low Power */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x001C, /* R200 - LDO1 Control */ + 0x0000, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x001B, /* R203 - LDO2 Control */ + 0x0000, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x001B, /* R206 - LDO3 Control */ + 0x0000, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x001B, /* R209 - LDO4 Control */ + 0x0000, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 - Security1 */ + 0x4000, /* R220 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 - Signal overrides */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 - Charger Overides/status */ + 0x0000, /* R227 - misc overrides */ + 0x0000, /* R228 - Supply overrides/status 1 */ + 0x0000, /* R229 - Supply overrides/status 2 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 - comparotor overrides */ + 0x0000, /* R232 */ + 0x0000, /* R233 - State Machine status */ + 0x1200, /* R234 */ + 0x0000, /* R235 */ + 0x8000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0003, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0004, /* R243 */ + 0x0300, /* R244 */ + 0x0000, /* R245 */ + 0x0200, /* R246 */ + 0x0000, /* R247 */ + 0x1000, /* R248 - DCDC1 Test Controls */ + 0x5000, /* R249 */ + 0x1000, /* R250 - DCDC3 Test Controls */ + 0x1000, /* R251 - DCDC4 Test Controls */ + 0x5100, /* R252 */ + 0x1000, /* R253 - DCDC6 Test Controls */ +}; +#endif + +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_1 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8352_mode1_defaults[] = { + 0x6143, /* R0 - Reset/ID */ + 0x0000, /* R1 - ID */ + 0x0002, /* R2 - Revision */ + 0x1C02, /* R3 - System Control 1 */ + 0x0204, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3A00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - OUT1L Volume */ + 0x00E4, /* R105 - OUT1R Volume */ + 0x00E4, /* R106 - OUT2L Volume */ + 0x02E4, /* R107 - OUT2R Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0000, /* R129 - GPIO Pin pull up Control */ + 0x0000, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x0BFB, /* R134 - GPIO Configuration (i/o) */ + 0x0FFF, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x0300, /* R140 - GPIO Function Select 1 */ + 0x0000, /* R141 - GPIO Function Select 2 */ + 0x2300, /* R142 - GPIO Function Select 3 */ + 0x0003, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 - Current Sink Driver B */ + 0x0000, /* R175 - CSB Flash control */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x032D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x0062, /* R180 - DCDC1 Control */ + 0x0400, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x0006, /* R186 - DCDC3 Control */ + 0x0800, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x0006, /* R189 - DCDC4 Control */ + 0x0C00, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 - DCDC5 Control */ + 0x0000, /* R193 - DCDC5 Timeouts */ + 0x0000, /* R194 */ + 0x0026, /* R195 - DCDC6 Control */ + 0x1000, /* R196 - DCDC6 Timeouts */ + 0x0006, /* R197 - DCDC6 Low Power */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x0002, /* R200 - LDO1 Control */ + 0x0000, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x001A, /* R203 - LDO2 Control */ + 0x0000, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x001F, /* R206 - LDO3 Control */ + 0x0000, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x001F, /* R209 - LDO4 Control */ + 0x0000, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 - Security1 */ + 0x4000, /* R220 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 - Signal overrides */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 - Charger Overides/status */ + 0x0000, /* R227 - misc overrides */ + 0x0000, /* R228 - Supply overrides/status 1 */ + 0x0000, /* R229 - Supply overrides/status 2 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 - comparotor overrides */ + 0x0000, /* R232 */ + 0x0000, /* R233 - State Machine status */ + 0x1200, /* R234 */ + 0x0000, /* R235 */ + 0x8000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0003, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0004, /* R243 */ + 0x0300, /* R244 */ + 0x0000, /* R245 */ + 0x0200, /* R246 */ + 0x0000, /* R247 */ + 0x1000, /* R248 - DCDC1 Test Controls */ + 0x5000, /* R249 */ + 0x1000, /* R250 - DCDC3 Test Controls */ + 0x1000, /* R251 - DCDC4 Test Controls */ + 0x5100, /* R252 */ + 0x1000, /* R253 - DCDC6 Test Controls */ +}; +#endif + +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_2 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8352_mode2_defaults[] = { + 0x6143, /* R0 - Reset/ID */ + 0x0000, /* R1 - ID */ + 0x0002, /* R2 - Revision */ + 0x1C02, /* R3 - System Control 1 */ + 0x0204, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3A00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - OUT1L Volume */ + 0x00E4, /* R105 - OUT1R Volume */ + 0x00E4, /* R106 - OUT2L Volume */ + 0x02E4, /* R107 - OUT2R Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0000, /* R129 - GPIO Pin pull up Control */ + 0x0110, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x09DA, /* R134 - GPIO Configuration (i/o) */ + 0x0DD6, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x1310, /* R140 - GPIO Function Select 1 */ + 0x0033, /* R141 - GPIO Function Select 2 */ + 0x2000, /* R142 - GPIO Function Select 3 */ + 0x0000, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 - Current Sink Driver B */ + 0x0000, /* R175 - CSB Flash control */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x032D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x000E, /* R180 - DCDC1 Control */ + 0x0800, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x0056, /* R186 - DCDC3 Control */ + 0x1800, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x000E, /* R189 - DCDC4 Control */ + 0x1000, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 - DCDC5 Control */ + 0x0000, /* R193 - DCDC5 Timeouts */ + 0x0000, /* R194 */ + 0x0026, /* R195 - DCDC6 Control */ + 0x0C00, /* R196 - DCDC6 Timeouts */ + 0x0006, /* R197 - DCDC6 Low Power */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x001C, /* R200 - LDO1 Control */ + 0x0000, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x0006, /* R203 - LDO2 Control */ + 0x0400, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x001C, /* R206 - LDO3 Control */ + 0x1400, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x001A, /* R209 - LDO4 Control */ + 0x0000, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 - Security1 */ + 0x4000, /* R220 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 - Signal overrides */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 - Charger Overides/status */ + 0x0000, /* R227 - misc overrides */ + 0x0000, /* R228 - Supply overrides/status 1 */ + 0x0000, /* R229 - Supply overrides/status 2 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 - comparotor overrides */ + 0x0000, /* R232 */ + 0x0000, /* R233 - State Machine status */ + 0x1200, /* R234 */ + 0x0000, /* R235 */ + 0x8000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0003, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0004, /* R243 */ + 0x0300, /* R244 */ + 0x0000, /* R245 */ + 0x0200, /* R246 */ + 0x0000, /* R247 */ + 0x1000, /* R248 - DCDC1 Test Controls */ + 0x5000, /* R249 */ + 0x1000, /* R250 - DCDC3 Test Controls */ + 0x1000, /* R251 - DCDC4 Test Controls */ + 0x5100, /* R252 */ + 0x1000, /* R253 - DCDC6 Test Controls */ +}; +#endif + +#ifdef CONFIG_MFD_WM8352_CONFIG_MODE_3 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8352_mode3_defaults[] = { + 0x6143, /* R0 - Reset/ID */ + 0x0000, /* R1 - ID */ + 0x0002, /* R2 - Revision */ + 0x1C02, /* R3 - System Control 1 */ + 0x0204, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3A00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - OUT1L Volume */ + 0x00E4, /* R105 - OUT1R Volume */ + 0x00E4, /* R106 - OUT2L Volume */ + 0x02E4, /* R107 - OUT2R Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0010, /* R129 - GPIO Pin pull up Control */ + 0x0000, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x0BFB, /* R134 - GPIO Configuration (i/o) */ + 0x0FFD, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x0310, /* R140 - GPIO Function Select 1 */ + 0x0001, /* R141 - GPIO Function Select 2 */ + 0x2300, /* R142 - GPIO Function Select 3 */ + 0x0003, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 - Current Sink Driver B */ + 0x0000, /* R175 - CSB Flash control */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x032D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x0006, /* R180 - DCDC1 Control */ + 0x0400, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x0050, /* R186 - DCDC3 Control */ + 0x0C00, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x000E, /* R189 - DCDC4 Control */ + 0x0400, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 - DCDC5 Control */ + 0x0000, /* R193 - DCDC5 Timeouts */ + 0x0000, /* R194 */ + 0x0029, /* R195 - DCDC6 Control */ + 0x0800, /* R196 - DCDC6 Timeouts */ + 0x0006, /* R197 - DCDC6 Low Power */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x001D, /* R200 - LDO1 Control */ + 0x1000, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x0017, /* R203 - LDO2 Control */ + 0x1000, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x0006, /* R206 - LDO3 Control */ + 0x1000, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x0010, /* R209 - LDO4 Control */ + 0x1000, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 - Security1 */ + 0x4000, /* R220 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 - Signal overrides */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 - Charger Overides/status */ + 0x0000, /* R227 - misc overrides */ + 0x0000, /* R228 - Supply overrides/status 1 */ + 0x0000, /* R229 - Supply overrides/status 2 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 - comparotor overrides */ + 0x0000, /* R232 */ + 0x0000, /* R233 - State Machine status */ + 0x1200, /* R234 */ + 0x0000, /* R235 */ + 0x8000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0003, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0004, /* R243 */ + 0x0300, /* R244 */ + 0x0000, /* R245 */ + 0x0200, /* R246 */ + 0x0000, /* R247 */ + 0x1000, /* R248 - DCDC1 Test Controls */ + 0x5000, /* R249 */ + 0x1000, /* R250 - DCDC3 Test Controls */ + 0x1000, /* R251 - DCDC4 Test Controls */ + 0x5100, /* R252 */ + 0x1000, /* R253 - DCDC6 Test Controls */ +}; +#endif + /* The register defaults for the config mode used must be compiled in but * due to the impact on kernel size it is possible to disable */ diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index afeff6f1316c..737579086d01 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -589,6 +589,10 @@ extern const u16 wm8350_mode0_defaults[]; extern const u16 wm8350_mode1_defaults[]; extern const u16 wm8350_mode2_defaults[]; extern const u16 wm8350_mode3_defaults[]; +extern const u16 wm8352_mode0_defaults[]; +extern const u16 wm8352_mode1_defaults[]; +extern const u16 wm8352_mode2_defaults[]; +extern const u16 wm8352_mode3_defaults[]; struct wm8350; From 53a0d99b1ef14f56baec06eec1e3dad031672b3a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 18 Dec 2008 23:12:08 +0100 Subject: [PATCH 23/30] mfd: Handle missing WM8350 platform data Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index fa505ac76c84..03af3b12c020 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1350,7 +1350,7 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, return ret; } - if (pdata->init) { + if (pdata && pdata->init) { ret = pdata->init(wm8350); if (ret != 0) { dev_err(wm8350->dev, "Platform init() failed: %d\n", From 645524a9c6e1e42dc4fe03217befb20e2fc4d43e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 18 Dec 2008 23:12:16 +0100 Subject: [PATCH 24/30] mfd: Support configurable numbers of DCDCs and ISINKs on WM8350 Some WM8350 variants have fewer DCDCs and ISINKs. Identify these at probe and refuse to use the absent DCDCs when running on these chips. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 6 ++++++ drivers/regulator/wm8350-regulator.c | 7 +++++++ include/linux/mfd/wm8350/pmic.h | 4 ++++ 3 files changed, 17 insertions(+) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 03af3b12c020..56c363c240a9 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1301,6 +1301,9 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, switch (mask_rev) { case 0: + wm8350->pmic.max_dcdc = WM8350_DCDC_6; + wm8350->pmic.max_isink = WM8350_ISINK_B; + switch (chip_rev) { case WM8350_REV_E: dev_info(wm8350->dev, "WM8350 Rev E\n"); @@ -1325,6 +1328,9 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, break; case 2: + wm8350->pmic.max_dcdc = WM8350_DCDC_6; + wm8350->pmic.max_isink = WM8350_ISINK_B; + switch (chip_rev) { case 0: dev_info(wm8350->dev, "WM8352 Rev A\n"); diff --git a/drivers/regulator/wm8350-regulator.c b/drivers/regulator/wm8350-regulator.c index 1f44b17e23b1..c68c496b2c49 100644 --- a/drivers/regulator/wm8350-regulator.c +++ b/drivers/regulator/wm8350-regulator.c @@ -1380,6 +1380,13 @@ int wm8350_register_regulator(struct wm8350 *wm8350, int reg, if (wm8350->pmic.pdev[reg]) return -EBUSY; + if (reg >= WM8350_DCDC_1 && reg <= WM8350_DCDC_6 && + reg > wm8350->pmic.max_dcdc) + return -ENODEV; + if (reg >= WM8350_ISINK_A && reg <= WM8350_ISINK_B && + reg > wm8350->pmic.max_isink) + return -ENODEV; + pdev = platform_device_alloc("wm8350-regulator", reg); if (!pdev) return -ENOMEM; diff --git a/include/linux/mfd/wm8350/pmic.h b/include/linux/mfd/wm8350/pmic.h index 69b69e07f62f..96acbfc8aa12 100644 --- a/include/linux/mfd/wm8350/pmic.h +++ b/include/linux/mfd/wm8350/pmic.h @@ -701,6 +701,10 @@ struct platform_device; struct regulator_init_data; struct wm8350_pmic { + /* Number of regulators of each type on this device */ + int max_dcdc; + int max_isink; + /* ISINK to DCDC mapping */ int isink_A_dcdc; int isink_B_dcdc; From ca23f8c1b0aa15dc69565244fc5dffa67a72dd02 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 18 Dec 2008 23:12:28 +0100 Subject: [PATCH 25/30] mfd: Add WM8351 support The WM8351 is a WM8350 variant. As well as register default changes the WM8351 has fewer voltage and current regulators than the WM8350. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 16 + drivers/mfd/wm8350-core.c | 47 ++ drivers/mfd/wm8350-i2c.c | 1 + drivers/mfd/wm8350-regmap.c | 1044 +++++++++++++++++++++++++++++++ include/linux/mfd/wm8350/core.h | 4 + 5 files changed, 1112 insertions(+) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 76a482dfc177..781a27955ff5 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -143,6 +143,22 @@ config MFD_WM8350_CONFIG_MODE_3 bool depends on MFD_WM8350 +config MFD_WM8351_CONFIG_MODE_0 + bool + depends on MFD_WM8350 + +config MFD_WM8351_CONFIG_MODE_1 + bool + depends on MFD_WM8350 + +config MFD_WM8351_CONFIG_MODE_2 + bool + depends on MFD_WM8350 + +config MFD_WM8351_CONFIG_MODE_3 + bool + depends on MFD_WM8350 + config MFD_WM8352_CONFIG_MODE_0 bool depends on MFD_WM8350 diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index 56c363c240a9..e03fe60b55bf 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1169,6 +1169,36 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode) return -EINVAL; } + case 1: + switch (mode) { +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0 + case 0: + reg_map = wm8351_mode0_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1 + case 1: + reg_map = wm8351_mode1_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2 + case 2: + reg_map = wm8351_mode2_defaults; + break; +#endif +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3 + case 3: + reg_map = wm8351_mode3_defaults; + break; +#endif + default: + dev_err(wm8350->dev, + "WM8351 configuration mode %d not supported\n", + mode); + return -EINVAL; + } + break; + case 2: switch (mode) { #ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0 @@ -1327,6 +1357,23 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq, } break; + case 1: + wm8350->pmic.max_dcdc = WM8350_DCDC_4; + wm8350->pmic.max_isink = WM8350_ISINK_A; + + switch (chip_rev) { + case 0: + dev_info(wm8350->dev, "WM8351 Rev A\n"); + wm8350->power.rev_g_coeff = 1; + break; + + default: + dev_err(wm8350->dev, "Unknown WM8351 CHIP_REV\n"); + ret = -ENODEV; + goto err; + } + break; + case 2: wm8350->pmic.max_dcdc = WM8350_DCDC_6; wm8350->pmic.max_isink = WM8350_ISINK_B; diff --git a/drivers/mfd/wm8350-i2c.c b/drivers/mfd/wm8350-i2c.c index 878051253084..8d8c93217572 100644 --- a/drivers/mfd/wm8350-i2c.c +++ b/drivers/mfd/wm8350-i2c.c @@ -97,6 +97,7 @@ static int wm8350_i2c_remove(struct i2c_client *i2c) static const struct i2c_device_id wm8350_i2c_id[] = { { "wm8350", 0 }, + { "wm8351", 0 }, { "wm8352", 0 }, { } }; diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c index 3e2cc37961f3..68887b817d17 100644 --- a/drivers/mfd/wm8350-regmap.c +++ b/drivers/mfd/wm8350-regmap.c @@ -1074,6 +1074,1050 @@ const u16 wm8350_mode3_defaults[] = { }; #endif +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_0 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8351_mode0_defaults[] = { + 0x6143, /* R0 - Reset/ID */ + 0x0000, /* R1 - ID */ + 0x0001, /* R2 - Revision */ + 0x1C02, /* R3 - System Control 1 */ + 0x0004, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3A00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - OUT1L Volume */ + 0x00E4, /* R105 - OUT1R Volume */ + 0x00E4, /* R106 - OUT2L Volume */ + 0x02E4, /* R107 - OUT2R Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0000, /* R129 - GPIO Pin pull up Control */ + 0x0000, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x0FFC, /* R134 - GPIO Configuration (i/o) */ + 0x0FFC, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x0013, /* R140 - GPIO Function Select 1 */ + 0x0000, /* R141 - GPIO Function Select 2 */ + 0x0000, /* R142 - GPIO Function Select 3 */ + 0x0003, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 */ + 0x0000, /* R175 */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x032D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x000E, /* R180 - DCDC1 Control */ + 0x0000, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x0000, /* R186 - DCDC3 Control */ + 0x0000, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x0000, /* R189 - DCDC4 Control */ + 0x0000, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 */ + 0x0000, /* R193 */ + 0x0000, /* R194 */ + 0x0000, /* R195 */ + 0x0000, /* R196 */ + 0x0006, /* R197 */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x001C, /* R200 - LDO1 Control */ + 0x0000, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x001B, /* R203 - LDO2 Control */ + 0x0000, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x001B, /* R206 - LDO3 Control */ + 0x0000, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x001B, /* R209 - LDO4 Control */ + 0x0000, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 - Security1 */ + 0x4000, /* R220 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 - Signal overrides */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 - Charger Overides/status */ + 0x0000, /* R227 - misc overrides */ + 0x0000, /* R228 - Supply overrides/status 1 */ + 0x0000, /* R229 - Supply overrides/status 2 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 - comparotor overrides */ + 0x0000, /* R232 */ + 0x0000, /* R233 - State Machine status */ + 0x1200, /* R234 - FLL Test 1 */ + 0x0000, /* R235 */ + 0x8000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0003, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0004, /* R243 */ + 0x0300, /* R244 */ + 0x0000, /* R245 */ + 0x0200, /* R246 */ + 0x0000, /* R247 */ + 0x1000, /* R248 - DCDC1 Test Controls */ + 0x1000, /* R249 */ + 0x1000, /* R250 - DCDC3 Test Controls */ + 0x1000, /* R251 - DCDC4 Test Controls */ +}; +#endif + +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_1 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8351_mode1_defaults[] = { + 0x6143, /* R0 - Reset/ID */ + 0x0000, /* R1 - ID */ + 0x0001, /* R2 - Revision */ + 0x1C02, /* R3 - System Control 1 */ + 0x0204, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3A00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - OUT1L Volume */ + 0x00E4, /* R105 - OUT1R Volume */ + 0x00E4, /* R106 - OUT2L Volume */ + 0x02E4, /* R107 - OUT2R Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0000, /* R129 - GPIO Pin pull up Control */ + 0x0000, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x0CFB, /* R134 - GPIO Configuration (i/o) */ + 0x0C1F, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x0300, /* R140 - GPIO Function Select 1 */ + 0x1110, /* R141 - GPIO Function Select 2 */ + 0x0013, /* R142 - GPIO Function Select 3 */ + 0x0003, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 */ + 0x0000, /* R175 */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x032D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x000E, /* R180 - DCDC1 Control */ + 0x0C00, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x0026, /* R186 - DCDC3 Control */ + 0x0400, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x0062, /* R189 - DCDC4 Control */ + 0x0800, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 */ + 0x0000, /* R193 */ + 0x0000, /* R194 */ + 0x000A, /* R195 */ + 0x1000, /* R196 */ + 0x0006, /* R197 */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x0006, /* R200 - LDO1 Control */ + 0x0000, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x0010, /* R203 - LDO2 Control */ + 0x0C00, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x001F, /* R206 - LDO3 Control */ + 0x0800, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x000A, /* R209 - LDO4 Control */ + 0x0800, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 - Security1 */ + 0x4000, /* R220 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 - Signal overrides */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 - Charger Overides/status */ + 0x0000, /* R227 - misc overrides */ + 0x0000, /* R228 - Supply overrides/status 1 */ + 0x0000, /* R229 - Supply overrides/status 2 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 - comparotor overrides */ + 0x0000, /* R232 */ + 0x0000, /* R233 - State Machine status */ + 0x1200, /* R234 - FLL Test 1 */ + 0x0000, /* R235 */ + 0x8000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0003, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0004, /* R243 */ + 0x0300, /* R244 */ + 0x0000, /* R245 */ + 0x0200, /* R246 */ + 0x1000, /* R247 */ + 0x1000, /* R248 - DCDC1 Test Controls */ + 0x1000, /* R249 */ + 0x1000, /* R250 - DCDC3 Test Controls */ + 0x1000, /* R251 - DCDC4 Test Controls */ +}; +#endif + +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_2 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8351_mode2_defaults[] = { + 0x6143, /* R0 - Reset/ID */ + 0x0000, /* R1 - ID */ + 0x0001, /* R2 - Revision */ + 0x1C02, /* R3 - System Control 1 */ + 0x0214, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3A00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - OUT1L Volume */ + 0x00E4, /* R105 - OUT1R Volume */ + 0x00E4, /* R106 - OUT2L Volume */ + 0x02E4, /* R107 - OUT2R Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0000, /* R129 - GPIO Pin pull up Control */ + 0x0110, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x09FA, /* R134 - GPIO Configuration (i/o) */ + 0x0DF6, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x1310, /* R140 - GPIO Function Select 1 */ + 0x0003, /* R141 - GPIO Function Select 2 */ + 0x2000, /* R142 - GPIO Function Select 3 */ + 0x0000, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 */ + 0x0000, /* R175 */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x032D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x001A, /* R180 - DCDC1 Control */ + 0x0800, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x0056, /* R186 - DCDC3 Control */ + 0x0400, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x0026, /* R189 - DCDC4 Control */ + 0x0C00, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 */ + 0x0000, /* R193 */ + 0x0000, /* R194 */ + 0x0026, /* R195 */ + 0x0C00, /* R196 */ + 0x0006, /* R197 */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x001C, /* R200 - LDO1 Control */ + 0x0400, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x0010, /* R203 - LDO2 Control */ + 0x0C00, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x0015, /* R206 - LDO3 Control */ + 0x0000, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x001A, /* R209 - LDO4 Control */ + 0x0000, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 - Security1 */ + 0x4000, /* R220 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 - Signal overrides */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 - Charger Overides/status */ + 0x0000, /* R227 - misc overrides */ + 0x0000, /* R228 - Supply overrides/status 1 */ + 0x0000, /* R229 - Supply overrides/status 2 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 - comparotor overrides */ + 0x0000, /* R232 */ + 0x0000, /* R233 - State Machine status */ + 0x1200, /* R234 - FLL Test 1 */ + 0x0000, /* R235 */ + 0x8000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0003, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0004, /* R243 */ + 0x0300, /* R244 */ + 0x0000, /* R245 */ + 0x0200, /* R246 */ + 0x0000, /* R247 */ + 0x1000, /* R248 - DCDC1 Test Controls */ + 0x1000, /* R249 */ + 0x1000, /* R250 - DCDC3 Test Controls */ + 0x1000, /* R251 - DCDC4 Test Controls */ +}; +#endif + +#ifdef CONFIG_MFD_WM8351_CONFIG_MODE_3 + +#undef WM8350_HAVE_CONFIG_MODE +#define WM8350_HAVE_CONFIG_MODE + +const u16 wm8351_mode3_defaults[] = { + 0x6143, /* R0 - Reset/ID */ + 0x0000, /* R1 - ID */ + 0x0001, /* R2 - Revision */ + 0x1C02, /* R3 - System Control 1 */ + 0x0204, /* R4 - System Control 2 */ + 0x0000, /* R5 - System Hibernate */ + 0x8A00, /* R6 - Interface Control */ + 0x0000, /* R7 */ + 0x8000, /* R8 - Power mgmt (1) */ + 0x0000, /* R9 - Power mgmt (2) */ + 0x0000, /* R10 - Power mgmt (3) */ + 0x2000, /* R11 - Power mgmt (4) */ + 0x0E00, /* R12 - Power mgmt (5) */ + 0x0000, /* R13 - Power mgmt (6) */ + 0x0000, /* R14 - Power mgmt (7) */ + 0x0000, /* R15 */ + 0x0000, /* R16 - RTC Seconds/Minutes */ + 0x0100, /* R17 - RTC Hours/Day */ + 0x0101, /* R18 - RTC Date/Month */ + 0x1400, /* R19 - RTC Year */ + 0x0000, /* R20 - Alarm Seconds/Minutes */ + 0x0000, /* R21 - Alarm Hours/Day */ + 0x0000, /* R22 - Alarm Date/Month */ + 0x0320, /* R23 - RTC Time Control */ + 0x0000, /* R24 - System Interrupts */ + 0x0000, /* R25 - Interrupt Status 1 */ + 0x0000, /* R26 - Interrupt Status 2 */ + 0x0000, /* R27 */ + 0x0000, /* R28 - Under Voltage Interrupt status */ + 0x0000, /* R29 - Over Current Interrupt status */ + 0x0000, /* R30 - GPIO Interrupt Status */ + 0x0000, /* R31 - Comparator Interrupt Status */ + 0x3FFF, /* R32 - System Interrupts Mask */ + 0x0000, /* R33 - Interrupt Status 1 Mask */ + 0x0000, /* R34 - Interrupt Status 2 Mask */ + 0x0000, /* R35 */ + 0x0000, /* R36 - Under Voltage Interrupt status Mask */ + 0x0000, /* R37 - Over Current Interrupt status Mask */ + 0x0000, /* R38 - GPIO Interrupt Status Mask */ + 0x0000, /* R39 - Comparator Interrupt Status Mask */ + 0x0040, /* R40 - Clock Control 1 */ + 0x0000, /* R41 - Clock Control 2 */ + 0x3A00, /* R42 - FLL Control 1 */ + 0x7086, /* R43 - FLL Control 2 */ + 0xC226, /* R44 - FLL Control 3 */ + 0x0000, /* R45 - FLL Control 4 */ + 0x0000, /* R46 */ + 0x0000, /* R47 */ + 0x0000, /* R48 - DAC Control */ + 0x0000, /* R49 */ + 0x00C0, /* R50 - DAC Digital Volume L */ + 0x00C0, /* R51 - DAC Digital Volume R */ + 0x0000, /* R52 */ + 0x0040, /* R53 - DAC LR Rate */ + 0x0000, /* R54 - DAC Clock Control */ + 0x0000, /* R55 */ + 0x0000, /* R56 */ + 0x0000, /* R57 */ + 0x4000, /* R58 - DAC Mute */ + 0x0000, /* R59 - DAC Mute Volume */ + 0x0000, /* R60 - DAC Side */ + 0x0000, /* R61 */ + 0x0000, /* R62 */ + 0x0000, /* R63 */ + 0x8000, /* R64 - ADC Control */ + 0x0000, /* R65 */ + 0x00C0, /* R66 - ADC Digital Volume L */ + 0x00C0, /* R67 - ADC Digital Volume R */ + 0x0000, /* R68 - ADC Divider */ + 0x0000, /* R69 */ + 0x0040, /* R70 - ADC LR Rate */ + 0x0000, /* R71 */ + 0x0303, /* R72 - Input Control */ + 0x0000, /* R73 - IN3 Input Control */ + 0x0000, /* R74 - Mic Bias Control */ + 0x0000, /* R75 */ + 0x0000, /* R76 - Output Control */ + 0x0000, /* R77 - Jack Detect */ + 0x0000, /* R78 - Anti Pop Control */ + 0x0000, /* R79 */ + 0x0040, /* R80 - Left Input Volume */ + 0x0040, /* R81 - Right Input Volume */ + 0x0000, /* R82 */ + 0x0000, /* R83 */ + 0x0000, /* R84 */ + 0x0000, /* R85 */ + 0x0000, /* R86 */ + 0x0000, /* R87 */ + 0x0800, /* R88 - Left Mixer Control */ + 0x1000, /* R89 - Right Mixer Control */ + 0x0000, /* R90 */ + 0x0000, /* R91 */ + 0x0000, /* R92 - OUT3 Mixer Control */ + 0x0000, /* R93 - OUT4 Mixer Control */ + 0x0000, /* R94 */ + 0x0000, /* R95 */ + 0x0000, /* R96 - Output Left Mixer Volume */ + 0x0000, /* R97 - Output Right Mixer Volume */ + 0x0000, /* R98 - Input Mixer Volume L */ + 0x0000, /* R99 - Input Mixer Volume R */ + 0x0000, /* R100 - Input Mixer Volume */ + 0x0000, /* R101 */ + 0x0000, /* R102 */ + 0x0000, /* R103 */ + 0x00E4, /* R104 - OUT1L Volume */ + 0x00E4, /* R105 - OUT1R Volume */ + 0x00E4, /* R106 - OUT2L Volume */ + 0x02E4, /* R107 - OUT2R Volume */ + 0x0000, /* R108 */ + 0x0000, /* R109 */ + 0x0000, /* R110 */ + 0x0000, /* R111 - BEEP Volume */ + 0x0A00, /* R112 - AI Formating */ + 0x0000, /* R113 - ADC DAC COMP */ + 0x0020, /* R114 - AI ADC Control */ + 0x0020, /* R115 - AI DAC Control */ + 0x0000, /* R116 */ + 0x0000, /* R117 */ + 0x0000, /* R118 */ + 0x0000, /* R119 */ + 0x0000, /* R120 */ + 0x0000, /* R121 */ + 0x0000, /* R122 */ + 0x0000, /* R123 */ + 0x0000, /* R124 */ + 0x0000, /* R125 */ + 0x0000, /* R126 */ + 0x0000, /* R127 */ + 0x1FFF, /* R128 - GPIO Debounce */ + 0x0010, /* R129 - GPIO Pin pull up Control */ + 0x0000, /* R130 - GPIO Pull down Control */ + 0x0000, /* R131 - GPIO Interrupt Mode */ + 0x0000, /* R132 */ + 0x0000, /* R133 - GPIO Control */ + 0x0BFB, /* R134 - GPIO Configuration (i/o) */ + 0x0FFD, /* R135 - GPIO Pin Polarity / Type */ + 0x0000, /* R136 */ + 0x0000, /* R137 */ + 0x0000, /* R138 */ + 0x0000, /* R139 */ + 0x0310, /* R140 - GPIO Function Select 1 */ + 0x0001, /* R141 - GPIO Function Select 2 */ + 0x2300, /* R142 - GPIO Function Select 3 */ + 0x0003, /* R143 - GPIO Function Select 4 */ + 0x0000, /* R144 - Digitiser Control (1) */ + 0x0002, /* R145 - Digitiser Control (2) */ + 0x0000, /* R146 */ + 0x0000, /* R147 */ + 0x0000, /* R148 */ + 0x0000, /* R149 */ + 0x0000, /* R150 */ + 0x0000, /* R151 */ + 0x7000, /* R152 - AUX1 Readback */ + 0x7000, /* R153 - AUX2 Readback */ + 0x7000, /* R154 - AUX3 Readback */ + 0x7000, /* R155 - AUX4 Readback */ + 0x0000, /* R156 - USB Voltage Readback */ + 0x0000, /* R157 - LINE Voltage Readback */ + 0x0000, /* R158 - BATT Voltage Readback */ + 0x0000, /* R159 - Chip Temp Readback */ + 0x0000, /* R160 */ + 0x0000, /* R161 */ + 0x0000, /* R162 */ + 0x0000, /* R163 - Generic Comparator Control */ + 0x0000, /* R164 - Generic comparator 1 */ + 0x0000, /* R165 - Generic comparator 2 */ + 0x0000, /* R166 - Generic comparator 3 */ + 0x0000, /* R167 - Generic comparator 4 */ + 0xA00F, /* R168 - Battery Charger Control 1 */ + 0x0B06, /* R169 - Battery Charger Control 2 */ + 0x0000, /* R170 - Battery Charger Control 3 */ + 0x0000, /* R171 */ + 0x0000, /* R172 - Current Sink Driver A */ + 0x0000, /* R173 - CSA Flash control */ + 0x0000, /* R174 */ + 0x0000, /* R175 */ + 0x0000, /* R176 - DCDC/LDO requested */ + 0x032D, /* R177 - DCDC Active options */ + 0x0000, /* R178 - DCDC Sleep options */ + 0x0025, /* R179 - Power-check comparator */ + 0x000E, /* R180 - DCDC1 Control */ + 0x0400, /* R181 - DCDC1 Timeouts */ + 0x1006, /* R182 - DCDC1 Low Power */ + 0x0018, /* R183 - DCDC2 Control */ + 0x0000, /* R184 - DCDC2 Timeouts */ + 0x0000, /* R185 */ + 0x0026, /* R186 - DCDC3 Control */ + 0x0800, /* R187 - DCDC3 Timeouts */ + 0x0006, /* R188 - DCDC3 Low Power */ + 0x0062, /* R189 - DCDC4 Control */ + 0x1400, /* R190 - DCDC4 Timeouts */ + 0x0006, /* R191 - DCDC4 Low Power */ + 0x0008, /* R192 */ + 0x0000, /* R193 */ + 0x0000, /* R194 */ + 0x0026, /* R195 */ + 0x0400, /* R196 */ + 0x0006, /* R197 */ + 0x0000, /* R198 */ + 0x0003, /* R199 - Limit Switch Control */ + 0x0006, /* R200 - LDO1 Control */ + 0x0C00, /* R201 - LDO1 Timeouts */ + 0x001C, /* R202 - LDO1 Low Power */ + 0x0016, /* R203 - LDO2 Control */ + 0x0000, /* R204 - LDO2 Timeouts */ + 0x001C, /* R205 - LDO2 Low Power */ + 0x0019, /* R206 - LDO3 Control */ + 0x0000, /* R207 - LDO3 Timeouts */ + 0x001C, /* R208 - LDO3 Low Power */ + 0x001A, /* R209 - LDO4 Control */ + 0x1000, /* R210 - LDO4 Timeouts */ + 0x001C, /* R211 - LDO4 Low Power */ + 0x0000, /* R212 */ + 0x0000, /* R213 */ + 0x0000, /* R214 */ + 0x0000, /* R215 - VCC_FAULT Masks */ + 0x001F, /* R216 - Main Bandgap Control */ + 0x0000, /* R217 - OSC Control */ + 0x9000, /* R218 - RTC Tick Control */ + 0x0000, /* R219 - Security1 */ + 0x4000, /* R220 */ + 0x0000, /* R221 */ + 0x0000, /* R222 */ + 0x0000, /* R223 */ + 0x0000, /* R224 - Signal overrides */ + 0x0000, /* R225 - DCDC/LDO status */ + 0x0000, /* R226 - Charger Overides/status */ + 0x0000, /* R227 - misc overrides */ + 0x0000, /* R228 - Supply overrides/status 1 */ + 0x0000, /* R229 - Supply overrides/status 2 */ + 0xE000, /* R230 - GPIO Pin Status */ + 0x0000, /* R231 - comparotor overrides */ + 0x0000, /* R232 */ + 0x0000, /* R233 - State Machine status */ + 0x1200, /* R234 - FLL Test 1 */ + 0x0000, /* R235 */ + 0x8000, /* R236 */ + 0x0000, /* R237 */ + 0x0000, /* R238 */ + 0x0000, /* R239 */ + 0x0003, /* R240 */ + 0x0000, /* R241 */ + 0x0000, /* R242 */ + 0x0004, /* R243 */ + 0x0300, /* R244 */ + 0x0000, /* R245 */ + 0x0200, /* R246 */ + 0x0000, /* R247 */ + 0x1000, /* R248 - DCDC1 Test Controls */ + 0x1000, /* R249 */ + 0x1000, /* R250 - DCDC3 Test Controls */ + 0x1000, /* R251 - DCDC4 Test Controls */ +}; +#endif + #ifdef CONFIG_MFD_WM8352_CONFIG_MODE_0 #undef WM8350_HAVE_CONFIG_MODE diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h index 737579086d01..980669d50dca 100644 --- a/include/linux/mfd/wm8350/core.h +++ b/include/linux/mfd/wm8350/core.h @@ -589,6 +589,10 @@ extern const u16 wm8350_mode0_defaults[]; extern const u16 wm8350_mode1_defaults[]; extern const u16 wm8350_mode2_defaults[]; extern const u16 wm8350_mode3_defaults[]; +extern const u16 wm8351_mode0_defaults[]; +extern const u16 wm8351_mode1_defaults[]; +extern const u16 wm8351_mode2_defaults[]; +extern const u16 wm8351_mode3_defaults[]; extern const u16 wm8352_mode0_defaults[]; extern const u16 wm8352_mode1_defaults[]; extern const u16 wm8352_mode2_defaults[]; From 4331bb32339a55fd88fbfb0581ed5132207bf9a2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 18 Dec 2008 23:20:14 +0100 Subject: [PATCH 26/30] mfd: Add missing break from wm3850-core Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index e03fe60b55bf..3a273ccef3f2 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -1168,6 +1168,7 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode) mode); return -EINVAL; } + break; case 1: switch (mode) { From 0931a4c6dbfab03f2bfd22a9170130f7b155d53a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 22 Dec 2008 12:05:27 +0100 Subject: [PATCH 27/30] mfd: dm355evm msp430 driver Basic MFD framework for the MSP430 microcontroller firmware used on the dm355evm board: - Provides an interface for other drivers: register read/write utilities, and register declarations. - Directly exports: * Many signals through the GPIO framework + LEDs + SW6 through gpio sysfs + NTSC/nPAL jumper through gpio sysfs + ... more could be added later, e.g. MMC signals * Child devices: + LEDs, via leds-gpio child (and default triggers) + RTC, via rtc-dm355evm child device + Buttons and IR control, via dm355evm_keys - Supports power-off system call. Use the reset button to power the board back up; the power supply LED will be on, but the MSP430 waits to re-activate the regulators. - On probe() this: * Announces firmware revision * Turns off the banked LEDs * Exports the resources noted above * Hooks the power-off support * Muxes tvp5146 -or- imager for video input Unless the new tvp514x driver (tracked for mainline) is configured, this assumes that some custom imager driver handles video-in. This completely ignores the registers reporting the output voltages on the various power supplies. Someone could add a hwmon interface if that seems useful. Signed-off-by: David Brownell Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 8 + drivers/mfd/Makefile | 2 + drivers/mfd/dm355evm_msp.c | 420 +++++++++++++++++++++++++++++++ include/linux/i2c/dm355evm_msp.h | 79 ++++++ 4 files changed, 509 insertions(+) create mode 100644 drivers/mfd/dm355evm_msp.c create mode 100644 include/linux/i2c/dm355evm_msp.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 781a27955ff5..02e9146ca44a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -34,6 +34,14 @@ config MFD_ASIC3 This driver supports the ASIC3 multifunction chip found on many PDAs (mainly iPAQ and HTC based ones) +config MFD_DM355EVM_MSP + bool "DaVinci DM355 EVM microcontroller" + depends on I2C && MACH_DAVINCI_DM355_EVM + help + This driver supports the MSP430 microcontroller used on these + boards. MSP430 firmware manages resets and power sequencing, + inputs from buttons and the IR remote, LEDs, an RTC, and more. + config HTC_EGPIO bool "HTC EGPIO support" depends on GENERIC_HARDIRQS && GPIOLIB && ARM diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 9a5ad8af9116..8f6cd5c48930 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -8,6 +8,8 @@ obj-$(CONFIG_MFD_ASIC3) += asic3.o obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o +obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o + obj-$(CONFIG_MFD_T7L66XB) += t7l66xb.o obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c new file mode 100644 index 000000000000..4214b3f72426 --- /dev/null +++ b/drivers/mfd/dm355evm_msp.c @@ -0,0 +1,420 @@ +/* + * dm355evm_msp.c - driver for MSP430 firmware on DM355EVM board + * + * Copyright (C) 2008 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +/* + * The DM355 is a DaVinci chip with video support but no C64+ DSP. Its + * EVM board has an MSP430 programmed with firmware for various board + * support functions. This driver exposes some of them directly, and + * supports other drivers (e.g. RTC, input) for more complex access. + * + * Because this firmware is entirely board-specific, this file embeds + * knowledge that would be passed as platform_data in a generic driver. + * + * This driver was tested with firmware revision A4. + */ + +#if defined(CONFIG_KEYBOARD_DM355EVM) \ + || defined(CONFIG_KEYBOARD_DM355EVM_MODULE) +#define msp_has_keyboard() true +#else +#define msp_has_keyboard() false +#endif + +#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) +#define msp_has_leds() true +#else +#define msp_has_leds() false +#endif + +#if defined(CONFIG_RTC_DRV_DM355EVM) || defined(CONFIG_RTC_DRV_DM355EVM_MODULE) +#define msp_has_rtc() true +#else +#define msp_has_rtc() false +#endif + +#if defined(CONFIG_VIDEO_TVP514X) || defined(CONFIG_VIDEO_TVP514X_MODULE) +#define msp_has_tvp() true +#else +#define msp_has_tvp() false +#endif + + +/*----------------------------------------------------------------------*/ + +/* REVISIT for paranoia's sake, retry reads/writes on error */ + +static struct i2c_client *msp430; + +/** + * dm355evm_msp_write - Writes a register in dm355evm_msp + * @value: the value to be written + * @reg: register address + * + * Returns result of operation - 0 is success, else negative errno + */ +int dm355evm_msp_write(u8 value, u8 reg) +{ + return i2c_smbus_write_byte_data(msp430, reg, value); +} +EXPORT_SYMBOL(dm355evm_msp_write); + +/** + * dm355evm_msp_read - Reads a register from dm355evm_msp + * @reg: register address + * + * Returns result of operation - value, or negative errno + */ +int dm355evm_msp_read(u8 reg) +{ + return i2c_smbus_read_byte_data(msp430, reg); +} +EXPORT_SYMBOL(dm355evm_msp_read); + +/*----------------------------------------------------------------------*/ + +/* + * Many of the msp430 pins are just used as fixed-direction GPIOs. + * We could export a few more of them this way, if we wanted. + */ +#define MSP_GPIO(bit,reg) ((DM355EVM_MSP_ ## reg) << 3 | (bit)) + +static const u8 msp_gpios[] = { + /* eight leds */ + MSP_GPIO(0, LED), MSP_GPIO(1, LED), + MSP_GPIO(2, LED), MSP_GPIO(3, LED), + MSP_GPIO(4, LED), MSP_GPIO(5, LED), + MSP_GPIO(6, LED), MSP_GPIO(7, LED), + /* SW6 and the NTSC/nPAL jumper */ + MSP_GPIO(0, SWITCH1), MSP_GPIO(1, SWITCH1), + MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1), + MSP_GPIO(4, SWITCH1), +}; + +#define MSP_GPIO_REG(offset) (msp_gpios[(offset)] >> 3) +#define MSP_GPIO_MASK(offset) BIT(msp_gpios[(offset)] & 0x07) + +static int msp_gpio_in(struct gpio_chip *chip, unsigned offset) +{ + switch (MSP_GPIO_REG(offset)) { + case DM355EVM_MSP_SWITCH1: + case DM355EVM_MSP_SWITCH2: + case DM355EVM_MSP_SDMMC: + return 0; + default: + return -EINVAL; + } +} + +static u8 msp_led_cache; + +static int msp_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + int reg, status; + + reg = MSP_GPIO_REG(offset); + status = dm355evm_msp_read(reg); + if (status < 0) + return status; + if (reg == DM355EVM_MSP_LED) + msp_led_cache = status; + return status & MSP_GPIO_MASK(offset); +} + +static int msp_gpio_out(struct gpio_chip *chip, unsigned offset, int value) +{ + int mask, bits; + + /* NOTE: there are some other signals that could be + * packaged as output GPIOs, but they aren't as useful + * as the LEDs ... so for now we don't. + */ + if (MSP_GPIO_REG(offset) != DM355EVM_MSP_LED) + return -EINVAL; + + mask = MSP_GPIO_MASK(offset); + bits = msp_led_cache; + + bits &= ~mask; + if (value) + bits |= mask; + msp_led_cache = bits; + + return dm355evm_msp_write(bits, DM355EVM_MSP_LED); +} + +static void msp_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + msp_gpio_out(chip, offset, value); +} + +static struct gpio_chip dm355evm_msp_gpio = { + .label = "dm355evm_msp", + .owner = THIS_MODULE, + .direction_input = msp_gpio_in, + .get = msp_gpio_get, + .direction_output = msp_gpio_out, + .set = msp_gpio_set, + .base = -EINVAL, /* dynamic assignment */ + .ngpio = ARRAY_SIZE(msp_gpios), + .can_sleep = true, +}; + +/*----------------------------------------------------------------------*/ + +static struct device *add_child(struct i2c_client *client, const char *name, + void *pdata, unsigned pdata_len, + bool can_wakeup, int irq) +{ + struct platform_device *pdev; + int status; + + pdev = platform_device_alloc(name, -1); + if (!pdev) { + dev_dbg(&client->dev, "can't alloc dev\n"); + status = -ENOMEM; + goto err; + } + + device_init_wakeup(&pdev->dev, can_wakeup); + pdev->dev.parent = &client->dev; + + if (pdata) { + status = platform_device_add_data(pdev, pdata, pdata_len); + if (status < 0) { + dev_dbg(&pdev->dev, "can't add platform_data\n"); + goto err; + } + } + + if (irq) { + struct resource r = { + .start = irq, + .flags = IORESOURCE_IRQ, + }; + + status = platform_device_add_resources(pdev, &r, 1); + if (status < 0) { + dev_dbg(&pdev->dev, "can't add irq\n"); + goto err; + } + } + + status = platform_device_add(pdev); + +err: + if (status < 0) { + platform_device_put(pdev); + dev_err(&client->dev, "can't add %s dev\n", name); + return ERR_PTR(status); + } + return &pdev->dev; +} + +static int add_children(struct i2c_client *client) +{ + static const struct { + int offset; + char *label; + } config_inputs[] = { + /* 8 == right after the LEDs */ + { 8 + 0, "sw6_1", }, + { 8 + 1, "sw6_2", }, + { 8 + 2, "sw6_3", }, + { 8 + 3, "sw6_4", }, + { 8 + 4, "NTSC/nPAL", }, + }; + + struct device *child; + int status; + int i; + + /* GPIO-ish stuff */ + dm355evm_msp_gpio.dev = &client->dev; + status = gpiochip_add(&dm355evm_msp_gpio); + if (status < 0) + return status; + + /* LED output */ + if (msp_has_leds()) { +#define GPIO_LED(l) .name = l, .active_low = true + static struct gpio_led evm_leds[] = { + { GPIO_LED("dm355evm::ds14"), + .default_trigger = "heartbeat", }, + { GPIO_LED("dm355evm::ds15"), + .default_trigger = "mmc0", }, + { GPIO_LED("dm355evm::ds16"), + /* could also be a CE-ATA drive */ + .default_trigger = "mmc1", }, + { GPIO_LED("dm355evm::ds17"), + .default_trigger = "nand-disk", }, + { GPIO_LED("dm355evm::ds18"), }, + { GPIO_LED("dm355evm::ds19"), }, + { GPIO_LED("dm355evm::ds20"), }, + { GPIO_LED("dm355evm::ds21"), }, + }; +#undef GPIO_LED + + struct gpio_led_platform_data evm_led_data = { + .num_leds = ARRAY_SIZE(evm_leds), + .leds = evm_leds, + }; + + for (i = 0; i < ARRAY_SIZE(evm_leds); i++) + evm_leds[i].gpio = i + dm355evm_msp_gpio.base; + + /* NOTE: these are the only fully programmable LEDs + * on the board, since GPIO-61/ds22 (and many signals + * going to DC7) must be used for AEMIF address lines + * unless the top 1 GB of NAND is unused... + */ + child = add_child(client, "leds-gpio", + &evm_led_data, sizeof(evm_led_data), + false, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + /* configuration inputs */ + for (i = 0; i < ARRAY_SIZE(config_inputs); i++) { + int gpio = dm355evm_msp_gpio.base + config_inputs[i].offset; + + gpio_request(gpio, config_inputs[i].label); + gpio_direction_input(gpio); + + /* make it easy for userspace to see these */ + gpio_export(gpio, false); + } + + /* RTC is a 32 bit counter, no alarm */ + if (msp_has_rtc()) { + child = add_child(client, "rtc-dm355evm", + NULL, 0, false, 0); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + /* input from buttons and IR remote (uses the IRQ) */ + if (msp_has_keyboard()) { + child = add_child(client, "dm355evm_keys", + NULL, 0, true, client->irq); + if (IS_ERR(child)) + return PTR_ERR(child); + } + + return 0; +} + +/*----------------------------------------------------------------------*/ + +static void dm355evm_command(unsigned command) +{ + int status; + + status = dm355evm_msp_write(command, DM355EVM_MSP_COMMAND); + if (status < 0) + dev_err(&msp430->dev, "command %d failure %d\n", + command, status); +} + +static void dm355evm_power_off(void) +{ + dm355evm_command(MSP_COMMAND_POWEROFF); +} + +static int dm355evm_msp_remove(struct i2c_client *client) +{ + pm_power_off = NULL; + msp430 = NULL; + return 0; +} + +static int +dm355evm_msp_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + int status; + const char *video = msp_has_tvp() ? "TVP5146" : "imager"; + + if (msp430) + return -EBUSY; + msp430 = client; + + /* display revision status; doubles as sanity check */ + status = dm355evm_msp_read(DM355EVM_MSP_FIRMREV); + if (status < 0) + goto fail; + dev_info(&client->dev, "firmware v.%02X, %s as video-in\n", + status, video); + + /* mux video input: either tvp5146 or some external imager */ + status = dm355evm_msp_write(msp_has_tvp() ? 0 : MSP_VIDEO_IMAGER, + DM355EVM_MSP_VIDEO_IN); + if (status < 0) + dev_warn(&client->dev, "error %d muxing %s as video-in\n", + status, video); + + /* init LED cache, and turn off the LEDs */ + msp_led_cache = 0xff; + dm355evm_msp_write(msp_led_cache, DM355EVM_MSP_LED); + + /* export capabilities we support */ + status = add_children(client); + if (status < 0) + goto fail; + + /* PM hookup */ + pm_power_off = dm355evm_power_off; + + return 0; + +fail: + /* FIXME remove children ... */ + dm355evm_msp_remove(client); + return status; +} + +static const struct i2c_device_id dm355evm_msp_ids[] = { + { "dm355evm_msp", 0 }, + { /* end of list */ }, +}; +MODULE_DEVICE_TABLE(i2c, dm355evm_msp_ids); + +static struct i2c_driver dm355evm_msp_driver = { + .driver.name = "dm355evm_msp", + .id_table = dm355evm_msp_ids, + .probe = dm355evm_msp_probe, + .remove = dm355evm_msp_remove, +}; + +static int __init dm355evm_msp_init(void) +{ + return i2c_add_driver(&dm355evm_msp_driver); +} +subsys_initcall(dm355evm_msp_init); + +static void __exit dm355evm_msp_exit(void) +{ + i2c_del_driver(&dm355evm_msp_driver); +} +module_exit(dm355evm_msp_exit); + +MODULE_DESCRIPTION("Interface to MSP430 firmware on DM355EVM"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/i2c/dm355evm_msp.h b/include/linux/i2c/dm355evm_msp.h new file mode 100644 index 000000000000..372470350fab --- /dev/null +++ b/include/linux/i2c/dm355evm_msp.h @@ -0,0 +1,79 @@ +/* + * dm355evm_msp.h - support MSP430 microcontroller on DM355EVM board + */ +#ifndef __LINUX_I2C_DM355EVM_MSP +#define __LINUX_I2C_DM355EVM_MSP + +/* + * Written against Spectrum's writeup for the A4 firmware revision, + * and tweaked to match source and rev D2 schematics by removing CPLD + * and NOR flash hooks (which were last appropriate in rev B boards). + * + * Note that the firmware supports a flavor of write posting ... to be + * sure a write completes, issue another read or write. + */ + +/* utilities to access "registers" emulated by msp430 firmware */ +extern int dm355evm_msp_write(u8 value, u8 reg); +extern int dm355evm_msp_read(u8 reg); + + +/* command/control registers */ +#define DM355EVM_MSP_COMMAND 0x00 +# define MSP_COMMAND_NULL 0 +# define MSP_COMMAND_RESET_COLD 1 +# define MSP_COMMAND_RESET_WARM 2 +# define MSP_COMMAND_RESET_WARM_I 3 +# define MSP_COMMAND_POWEROFF 4 +# define MSP_COMMAND_IR_REINIT 5 +#define DM355EVM_MSP_STATUS 0x01 +# define MSP_STATUS_BAD_OFFSET BIT(0) +# define MSP_STATUS_BAD_COMMAND BIT(1) +# define MSP_STATUS_POWER_ERROR BIT(2) +# define MSP_STATUS_RXBUF_OVERRUN BIT(3) +#define DM355EVM_MSP_RESET 0x02 /* 0 bits == in reset */ +# define MSP_RESET_DC5 BIT(0) +# define MSP_RESET_TVP5154 BIT(2) +# define MSP_RESET_IMAGER BIT(3) +# define MSP_RESET_ETHERNET BIT(4) +# define MSP_RESET_SYS BIT(5) +# define MSP_RESET_AIC33 BIT(7) + +/* GPIO registers ... bit patterns mostly match the source MSP ports */ +#define DM355EVM_MSP_LED 0x03 /* active low (MSP P4) */ +#define DM355EVM_MSP_SWITCH1 0x04 /* (MSP P5, masked) */ +# define MSP_SWITCH1_SW6_1 BIT(0) +# define MSP_SWITCH1_SW6_2 BIT(1) +# define MSP_SWITCH1_SW6_3 BIT(2) +# define MSP_SWITCH1_SW6_4 BIT(3) +# define MSP_SWITCH1_J1 BIT(4) /* NTSC/PAL */ +# define MSP_SWITCH1_MSP_INT BIT(5) /* active low */ +#define DM355EVM_MSP_SWITCH2 0x05 /* (MSP P6, masked) */ +# define MSP_SWITCH2_SW10 BIT(3) +# define MSP_SWITCH2_SW11 BIT(4) +# define MSP_SWITCH2_SW12 BIT(5) +# define MSP_SWITCH2_SW13 BIT(6) +# define MSP_SWITCH2_SW14 BIT(7) +#define DM355EVM_MSP_SDMMC 0x06 /* (MSP P2, masked) */ +# define MSP_SDMMC_0_WP BIT(1) +# define MSP_SDMMC_0_CD BIT(2) /* active low */ +# define MSP_SDMMC_1_WP BIT(3) +# define MSP_SDMMC_1_CD BIT(4) /* active low */ +#define DM355EVM_MSP_FIRMREV 0x07 /* not a GPIO (out of order) */ +#define DM355EVM_MSP_VIDEO_IN 0x08 /* (MSP P3, masked) */ +# define MSP_VIDEO_IMAGER BIT(7) /* low == tvp5146 */ + +/* power supply registers are currently omitted */ + +/* RTC registers */ +#define DM355EVM_MSP_RTC_0 0x12 /* LSB */ +#define DM355EVM_MSP_RTC_1 0x13 +#define DM355EVM_MSP_RTC_2 0x14 +#define DM355EVM_MSP_RTC_3 0x15 /* MSB */ + +/* input event queue registers; code == ((HIGH << 8) | LOW) */ +#define DM355EVM_MSP_INPUT_COUNT 0x16 /* decrement by reading LOW */ +#define DM355EVM_MSP_INPUT_HIGH 0x17 +#define DM355EVM_MSP_INPUT_LOW 0x18 + +#endif /* __LINUX_I2C_DM355EVM_MSP */ From 87c13493e6a59c0da55c2824f0205f9ef941b760 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 22 Dec 2008 12:16:27 +0100 Subject: [PATCH 28/30] mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd Move the tps65010 driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP1 generation chips. Signed-off-by: David Brownell Signed-off-by: Samuel Ortiz --- drivers/i2c/chips/Kconfig | 13 ------------- drivers/i2c/chips/Makefile | 1 - drivers/mfd/Kconfig | 13 +++++++++++++ drivers/mfd/Makefile | 4 +++- drivers/{i2c/chips => mfd}/tps65010.c | 0 5 files changed, 16 insertions(+), 15 deletions(-) rename drivers/{i2c/chips => mfd}/tps65010.c (100%) diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 4c35702830ce..fa69c992c442 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -126,19 +126,6 @@ config ISP1301_OMAP This driver can also be built as a module. If so, the module will be called isp1301_omap. -config TPS65010 - tristate "TPS6501x Power Management chips" - depends on GPIOLIB - default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK - help - If you say yes here you get support for the TPS6501x series of - Power Management chips. These include voltage regulators, - lithium ion/polymer battery charging, and other features that - are often used in portable devices like cell phones and cameras. - - This driver can also be built as a module. If so, the module - will be called tps65010. - config SENSORS_MAX6875 tristate "Maxim MAX6875 Power supply supervisor" depends on EXPERIMENTAL diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 23d2a31b0a64..0c7e2f1e0c4b 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_PCF8575) += pcf8575.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o -obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 02e9146ca44a..182e1486e9d1 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -69,6 +69,19 @@ config UCB1400_CORE To compile this driver as a module, choose M here: the module will be called ucb1400_core. +config TPS65010 + tristate "TPS6501x Power Management chips" + depends on I2C && GPIOLIB + default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK + help + If you say yes here you get support for the TPS6501x series of + Power Management chips. These include voltage regulators, + lithium ion/polymer battery charging, and other features that + are often used in portable devices like cell phones and cameras. + + This driver can also be built as a module. If so, the module + will be called tps65010. + config TWL4030_CORE bool "Texas Instruments TWL4030/TPS659x0 Support" depends on I2C=y && GENERIC_HARDIRQS diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 8f6cd5c48930..3989e30e954e 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -19,6 +19,8 @@ wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o +obj-$(CONFIG_TPS65010) += tps65010.o + obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o obj-$(CONFIG_MFD_CORE) += mfd-core.o @@ -33,4 +35,4 @@ obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o endif obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o -obj-$(CONFIG_PMIC_DA903X) += da903x.o \ No newline at end of file +obj-$(CONFIG_PMIC_DA903X) += da903x.o diff --git a/drivers/i2c/chips/tps65010.c b/drivers/mfd/tps65010.c similarity index 100% rename from drivers/i2c/chips/tps65010.c rename to drivers/mfd/tps65010.c From 88e75cc347f66bc20e3c2b920431fc07253d69be Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 22 Dec 2008 12:18:02 +0100 Subject: [PATCH 29/30] mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd ove the menelaus driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP2 generation chips. Signed-off-by: David Brownell Signed-off-by: Samuel Ortiz --- drivers/i2c/chips/Kconfig | 10 ---------- drivers/i2c/chips/Makefile | 1 - drivers/mfd/Kconfig | 10 ++++++++++ drivers/mfd/Makefile | 1 + drivers/{i2c/chips => mfd}/menelaus.c | 0 5 files changed, 11 insertions(+), 11 deletions(-) rename drivers/{i2c/chips => mfd}/menelaus.c (100%) diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index fa69c992c442..864ac561fdbb 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -151,16 +151,6 @@ config SENSORS_TSL2550 This driver can also be built as a module. If so, the module will be called tsl2550. -config MENELAUS - bool "TWL92330/Menelaus PM chip" - depends on I2C=y && ARCH_OMAP24XX - help - If you say yes here you get support for the Texas Instruments - TWL92330/Menelaus Power Management chip. This include voltage - regulators, Dual slot memory card tranceivers, real-time clock - and other features that are often used in portable devices like - cell phones and PDAs. - config MCU_MPC8349EMITX tristate "MPC8349E-mITX MCU driver" depends on I2C && PPC_83xx diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 0c7e2f1e0c4b..8b95f41a5001 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_PCF8575) += pcf8575.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o -obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o obj-$(CONFIG_MCU_MPC8349EMITX) += mcu_mpc8349emitx.o diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 182e1486e9d1..416f9e7286ba 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -82,6 +82,16 @@ config TPS65010 This driver can also be built as a module. If so, the module will be called tps65010. +config MENELAUS + bool "Texas Instruments TWL92330/Menelaus PM chip" + depends on I2C=y && ARCH_OMAP24XX + help + If you say yes here you get support for the Texas Instruments + TWL92330/Menelaus Power Management chip. This include voltage + regulators, Dual slot memory card tranceivers, real-time clock + and other features that are often used in portable devices like + cell phones and PDAs. + config TWL4030_CORE bool "Texas Instruments TWL4030/TPS659x0 Support" depends on I2C=y && GENERIC_HARDIRQS diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 3989e30e954e..0c9418b36c26 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o obj-$(CONFIG_TPS65010) += tps65010.o +obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o diff --git a/drivers/i2c/chips/menelaus.c b/drivers/mfd/menelaus.c similarity index 100% rename from drivers/i2c/chips/menelaus.c rename to drivers/mfd/menelaus.c From 3f874b6643e189d3d07618928ceed0013d71593e Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 4 Jan 2009 15:31:49 +0100 Subject: [PATCH 30/30] mfd: Fix section mismatch in da903x The subdevice removal functions are marked __devexit but are referenced from the error handling path when probing so are needed even when __devexit functions are removed. Signed-off-by: Mark Brown Acked-by: Eric Miao Signed-off-by: Samuel Ortiz --- drivers/mfd/da903x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index fcaf1f6028dd..99f8dcfe3d98 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -447,13 +447,13 @@ static const struct i2c_device_id da903x_id_table[] = { }; MODULE_DEVICE_TABLE(i2c, da903x_id_table); -static int __devexit __remove_subdev(struct device *dev, void *unused) +static int __remove_subdev(struct device *dev, void *unused) { platform_device_unregister(to_platform_device(dev)); return 0; } -static int __devexit da903x_remove_subdevs(struct da903x_chip *chip) +static int da903x_remove_subdevs(struct da903x_chip *chip) { return device_for_each_child(chip->dev, NULL, __remove_subdev); }