forked from luck/tmp_suning_uos_patched
staging: iio: ad7780: add gain & filter gpio support
Previously, the AD7780 driver only supported gpio for the 'powerdown' pin. This commit adds suppport for the 'gain' and 'filter' pin. Signed-off-by: Renato Lui Geh <renatogeh@gmail.com> Signed-off-by: Giuliano Belinassi <giuliano.belinassi@usp.br> Co-developed-by: Giuliano Belinassi <giuliano.belinassi@usp.br> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
parent
caeffabc36
commit
9085daa4ab
|
@ -39,6 +39,9 @@
|
|||
#define AD7170_PATTERN (AD7780_PAT0 | AD7170_PAT2)
|
||||
#define AD7170_PATTERN_MASK (AD7780_PAT0 | AD7780_PAT1 | AD7170_PAT2)
|
||||
|
||||
#define AD7780_GAIN_MIDPOINT 64
|
||||
#define AD7780_FILTER_MIDPOINT 13350
|
||||
|
||||
struct ad7780_chip_info {
|
||||
struct iio_chan_spec channel;
|
||||
unsigned int pattern_mask;
|
||||
|
@ -50,7 +53,10 @@ struct ad7780_state {
|
|||
const struct ad7780_chip_info *chip_info;
|
||||
struct regulator *reg;
|
||||
struct gpio_desc *powerdown_gpio;
|
||||
unsigned int gain;
|
||||
struct gpio_desc *gain_gpio;
|
||||
struct gpio_desc *filter_gpio;
|
||||
unsigned int gain;
|
||||
unsigned int int_vref_mv;
|
||||
|
||||
struct ad_sigma_delta sd;
|
||||
};
|
||||
|
@ -104,8 +110,10 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
|
|||
voltage_uv = regulator_get_voltage(st->reg);
|
||||
if (voltage_uv < 0)
|
||||
return voltage_uv;
|
||||
*val = (voltage_uv / 1000) * st->gain;
|
||||
voltage_uv /= 1000;
|
||||
*val = voltage_uv * st->gain;
|
||||
*val2 = chan->scan_type.realbits - 1;
|
||||
st->int_vref_mv = voltage_uv;
|
||||
return IIO_VAL_FRACTIONAL_LOG2;
|
||||
case IIO_CHAN_INFO_OFFSET:
|
||||
*val = -(1 << (chan->scan_type.realbits - 1));
|
||||
|
@ -115,6 +123,50 @@ static int ad7780_read_raw(struct iio_dev *indio_dev,
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int ad7780_write_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int val,
|
||||
int val2,
|
||||
long m)
|
||||
{
|
||||
struct ad7780_state *st = iio_priv(indio_dev);
|
||||
const struct ad7780_chip_info *chip_info = st->chip_info;
|
||||
unsigned long long vref;
|
||||
unsigned int full_scale, gain;
|
||||
|
||||
if (!chip_info->is_ad778x)
|
||||
return -EINVAL;
|
||||
|
||||
switch (m) {
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
if (val != 0)
|
||||
return -EINVAL;
|
||||
|
||||
vref = st->int_vref_mv * 1000000LL;
|
||||
full_scale = 1 << (chip_info->channel.scan_type.realbits - 1);
|
||||
gain = DIV_ROUND_CLOSEST_ULL(vref, full_scale);
|
||||
gain = DIV_ROUND_CLOSEST(gain, val2);
|
||||
st->gain = gain;
|
||||
if (gain < AD7780_GAIN_MIDPOINT)
|
||||
gain = 0;
|
||||
else
|
||||
gain = 1;
|
||||
gpiod_set_value(st->gain_gpio, gain);
|
||||
break;
|
||||
case IIO_CHAN_INFO_SAMP_FREQ:
|
||||
if (1000*val + val2/1000 < AD7780_FILTER_MIDPOINT)
|
||||
val = 0;
|
||||
else
|
||||
val = 1;
|
||||
gpiod_set_value(st->filter_gpio, val);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ad7780_postprocess_sample(struct ad_sigma_delta *sigma_delta,
|
||||
unsigned int raw_sample)
|
||||
{
|
||||
|
@ -125,13 +177,6 @@ static int ad7780_postprocess_sample(struct ad_sigma_delta *sigma_delta,
|
|||
((raw_sample & chip_info->pattern_mask) != chip_info->pattern))
|
||||
return -EIO;
|
||||
|
||||
if (chip_info->is_ad778x) {
|
||||
if (raw_sample & AD7780_GAIN)
|
||||
st->gain = 1;
|
||||
else
|
||||
st->gain = 128;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -173,8 +218,47 @@ static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
|
|||
|
||||
static const struct iio_info ad7780_info = {
|
||||
.read_raw = ad7780_read_raw,
|
||||
.write_raw = ad7780_write_raw,
|
||||
};
|
||||
|
||||
static int ad7780_init_gpios(struct device *dev, struct ad7780_state *st)
|
||||
{
|
||||
int ret;
|
||||
|
||||
st->powerdown_gpio = devm_gpiod_get_optional(dev,
|
||||
"powerdown",
|
||||
GPIOD_OUT_LOW);
|
||||
if (IS_ERR(st->powerdown_gpio)) {
|
||||
ret = PTR_ERR(st->powerdown_gpio);
|
||||
dev_err(dev, "Failed to request powerdown GPIO: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (!st->chip_info->is_ad778x)
|
||||
return 0;
|
||||
|
||||
|
||||
st->gain_gpio = devm_gpiod_get_optional(dev,
|
||||
"adi,gain",
|
||||
GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(st->gain_gpio)) {
|
||||
ret = PTR_ERR(st->gain_gpio);
|
||||
dev_err(dev, "Failed to request gain GPIO: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
st->filter_gpio = devm_gpiod_get_optional(dev,
|
||||
"adi,filter",
|
||||
GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(st->filter_gpio)) {
|
||||
ret = PTR_ERR(st->filter_gpio);
|
||||
dev_err(dev, "Failed to request filter GPIO: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int ad7780_probe(struct spi_device *spi)
|
||||
{
|
||||
struct ad7780_state *st;
|
||||
|
@ -212,15 +296,9 @@ static int ad7780_probe(struct spi_device *spi)
|
|||
indio_dev->num_channels = 1;
|
||||
indio_dev->info = &ad7780_info;
|
||||
|
||||
st->powerdown_gpio = devm_gpiod_get_optional(&spi->dev,
|
||||
"powerdown",
|
||||
GPIOD_OUT_LOW);
|
||||
if (IS_ERR(st->powerdown_gpio)) {
|
||||
ret = PTR_ERR(st->powerdown_gpio);
|
||||
dev_err(&spi->dev, "Failed to request powerdown GPIO: %d\n",
|
||||
ret);
|
||||
goto error_disable_reg;
|
||||
}
|
||||
ret = ad7780_init_gpios(&spi->dev, st);
|
||||
if (ret)
|
||||
goto error_cleanup_buffer_and_trigger;
|
||||
|
||||
ret = ad_sd_setup_buffer_and_trigger(indio_dev);
|
||||
if (ret)
|
||||
|
|
Loading…
Reference in New Issue
Block a user