forked from luck/tmp_suning_uos_patched
iio: pressure: st_pressure: inline per-sensor data
We have #defines for all the individual sensor registers and value/mask pairs #defined at the top of the file and used at exactly one spot. This is usually good if the #defines give a meaning to the opaque magic numbers. However in this case, the semantic meaning is inherent in the name of the C99-addressable fields, and that means duplication of information, and only makes the code hard to maintain since you every time have to add a new #define AND update the site where it is to be used. Get rid of the #defines and just open code the values into the appropriate struct elements. Make sure to explicitly address the .hz and .value fields in the st_sensor_odr_avl struct so that the meaning of all values is clear. This patch is purely syntactic should have no semantic effect. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
Linus Walleij
Jonathan Cameron
parent
57d0355451
commit
91a86a3b89
|
|
@ -112,115 +112,24 @@
|
|||
#define ST_PRESS_1_OUT_XL_ADDR 0x28
|
||||
#define ST_TEMP_1_OUT_L_ADDR 0x2b
|
||||
|
||||
/*
|
||||
* CUSTOM VALUES FOR LPS331AP SENSOR
|
||||
* See LPS331AP datasheet:
|
||||
* http://www2.st.com/resource/en/datasheet/lps331ap.pdf
|
||||
*/
|
||||
#define ST_PRESS_LPS331AP_WAI_EXP 0xbb
|
||||
#define ST_PRESS_LPS331AP_ODR_ADDR 0x20
|
||||
#define ST_PRESS_LPS331AP_ODR_MASK 0x70
|
||||
#define ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL 0x01
|
||||
#define ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL 0x05
|
||||
#define ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL 0x06
|
||||
#define ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL 0x07
|
||||
#define ST_PRESS_LPS331AP_PW_ADDR 0x20
|
||||
#define ST_PRESS_LPS331AP_PW_MASK 0x80
|
||||
#define ST_PRESS_LPS331AP_FS_ADDR 0x23
|
||||
#define ST_PRESS_LPS331AP_FS_MASK 0x30
|
||||
#define ST_PRESS_LPS331AP_BDU_ADDR 0x20
|
||||
#define ST_PRESS_LPS331AP_BDU_MASK 0x04
|
||||
#define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22
|
||||
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK 0x04
|
||||
#define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20
|
||||
#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22
|
||||
#define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80
|
||||
#define ST_PRESS_LPS331AP_OD_IRQ_ADDR 0x22
|
||||
#define ST_PRESS_LPS331AP_OD_IRQ_MASK 0x40
|
||||
#define ST_PRESS_LPS331AP_MULTIREAD_BIT true
|
||||
|
||||
/*
|
||||
* CUSTOM VALUES FOR THE OBSOLETE LPS001WP SENSOR
|
||||
*/
|
||||
|
||||
/* LPS001WP pressure resolution */
|
||||
#define ST_PRESS_LPS001WP_LSB_PER_MBAR 16UL
|
||||
/* LPS001WP temperature resolution */
|
||||
#define ST_PRESS_LPS001WP_LSB_PER_CELSIUS 64UL
|
||||
|
||||
#define ST_PRESS_LPS001WP_WAI_EXP 0xba
|
||||
#define ST_PRESS_LPS001WP_ODR_ADDR 0x20
|
||||
#define ST_PRESS_LPS001WP_ODR_MASK 0x30
|
||||
#define ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL 0x01
|
||||
#define ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL 0x02
|
||||
#define ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL 0x03
|
||||
#define ST_PRESS_LPS001WP_PW_ADDR 0x20
|
||||
#define ST_PRESS_LPS001WP_PW_MASK 0x40
|
||||
/* LPS001WP pressure gain */
|
||||
#define ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN \
|
||||
(100000000UL / ST_PRESS_LPS001WP_LSB_PER_MBAR)
|
||||
#define ST_PRESS_LPS001WP_BDU_ADDR 0x20
|
||||
#define ST_PRESS_LPS001WP_BDU_MASK 0x04
|
||||
#define ST_PRESS_LPS001WP_MULTIREAD_BIT true
|
||||
/* LPS001WP pressure and temp L addresses */
|
||||
#define ST_PRESS_LPS001WP_OUT_L_ADDR 0x28
|
||||
#define ST_TEMP_LPS001WP_OUT_L_ADDR 0x2a
|
||||
|
||||
/*
|
||||
* CUSTOM VALUES FOR LPS25H SENSOR
|
||||
* See LPS25H datasheet:
|
||||
* http://www2.st.com/resource/en/datasheet/lps25h.pdf
|
||||
*/
|
||||
#define ST_PRESS_LPS25H_WAI_EXP 0xbd
|
||||
#define ST_PRESS_LPS25H_ODR_ADDR 0x20
|
||||
#define ST_PRESS_LPS25H_ODR_MASK 0x70
|
||||
#define ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL 0x01
|
||||
#define ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL 0x02
|
||||
#define ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL 0x03
|
||||
#define ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL 0x04
|
||||
#define ST_PRESS_LPS25H_PW_ADDR 0x20
|
||||
#define ST_PRESS_LPS25H_PW_MASK 0x80
|
||||
#define ST_PRESS_LPS25H_BDU_ADDR 0x20
|
||||
#define ST_PRESS_LPS25H_BDU_MASK 0x04
|
||||
#define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23
|
||||
#define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK 0x01
|
||||
#define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10
|
||||
#define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22
|
||||
#define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80
|
||||
#define ST_PRESS_LPS25H_OD_IRQ_ADDR 0x22
|
||||
#define ST_PRESS_LPS25H_OD_IRQ_MASK 0x40
|
||||
#define ST_PRESS_LPS25H_MULTIREAD_BIT true
|
||||
/* LPS25H pressure and temp L addresses */
|
||||
#define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28
|
||||
#define ST_TEMP_LPS25H_OUT_L_ADDR 0x2b
|
||||
|
||||
/*
|
||||
* CUSTOM VALUES FOR LPS22HB SENSOR
|
||||
* See LPS22HB datasheet:
|
||||
* http://www2.st.com/resource/en/datasheet/lps22hb.pdf
|
||||
*/
|
||||
|
||||
/* LPS22HB temperature sensitivity */
|
||||
#define ST_PRESS_LPS22HB_LSB_PER_CELSIUS 100UL
|
||||
|
||||
#define ST_PRESS_LPS22HB_WAI_EXP 0xb1
|
||||
#define ST_PRESS_LPS22HB_ODR_ADDR 0x10
|
||||
#define ST_PRESS_LPS22HB_ODR_MASK 0x70
|
||||
#define ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL 0x01
|
||||
#define ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL 0x02
|
||||
#define ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL 0x03
|
||||
#define ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL 0x04
|
||||
#define ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL 0x05
|
||||
#define ST_PRESS_LPS22HB_PW_ADDR 0x10
|
||||
#define ST_PRESS_LPS22HB_PW_MASK 0x70
|
||||
#define ST_PRESS_LPS22HB_BDU_ADDR 0x10
|
||||
#define ST_PRESS_LPS22HB_BDU_MASK 0x02
|
||||
#define ST_PRESS_LPS22HB_DRDY_IRQ_ADDR 0x12
|
||||
#define ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK 0x04
|
||||
#define ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK 0x08
|
||||
#define ST_PRESS_LPS22HB_IHL_IRQ_ADDR 0x12
|
||||
#define ST_PRESS_LPS22HB_IHL_IRQ_MASK 0x80
|
||||
#define ST_PRESS_LPS22HB_OD_IRQ_ADDR 0x12
|
||||
#define ST_PRESS_LPS22HB_OD_IRQ_MASK 0x40
|
||||
#define ST_PRESS_LPS22HB_MULTIREAD_BIT true
|
||||
|
||||
static const struct iio_chan_spec st_press_1_channels[] = {
|
||||
{
|
||||
.type = IIO_PRESSURE,
|
||||
|
|
@ -321,7 +230,12 @@ static const struct iio_chan_spec st_press_lps22hb_channels[] = {
|
|||
|
||||
static const struct st_sensor_settings st_press_sensors_settings[] = {
|
||||
{
|
||||
.wai = ST_PRESS_LPS331AP_WAI_EXP,
|
||||
/*
|
||||
* CUSTOM VALUES FOR LPS331AP SENSOR
|
||||
* See LPS331AP datasheet:
|
||||
* http://www2.st.com/resource/en/datasheet/lps331ap.pdf
|
||||
*/
|
||||
.wai = 0xbb,
|
||||
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
||||
.sensors_supported = {
|
||||
[0] = LPS331AP_PRESS_DEV_NAME,
|
||||
|
|
@ -329,24 +243,24 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
|
|||
.ch = (struct iio_chan_spec *)st_press_1_channels,
|
||||
.num_ch = ARRAY_SIZE(st_press_1_channels),
|
||||
.odr = {
|
||||
.addr = ST_PRESS_LPS331AP_ODR_ADDR,
|
||||
.mask = ST_PRESS_LPS331AP_ODR_MASK,
|
||||
.addr = 0x20,
|
||||
.mask = 0x70,
|
||||
.odr_avl = {
|
||||
{ 1, ST_PRESS_LPS331AP_ODR_AVL_1HZ_VAL, },
|
||||
{ 7, ST_PRESS_LPS331AP_ODR_AVL_7HZ_VAL, },
|
||||
{ 13, ST_PRESS_LPS331AP_ODR_AVL_13HZ_VAL, },
|
||||
{ 25, ST_PRESS_LPS331AP_ODR_AVL_25HZ_VAL, },
|
||||
{ .hz = 1, .value = 0x01 },
|
||||
{ .hz = 7, .value = 0x05 },
|
||||
{ .hz = 13, .value = 0x06 },
|
||||
{ .hz = 25, .value = 0x07 },
|
||||
},
|
||||
},
|
||||
.pw = {
|
||||
.addr = ST_PRESS_LPS331AP_PW_ADDR,
|
||||
.mask = ST_PRESS_LPS331AP_PW_MASK,
|
||||
.addr = 0x20,
|
||||
.mask = 0x80,
|
||||
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
||||
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
||||
},
|
||||
.fs = {
|
||||
.addr = ST_PRESS_LPS331AP_FS_ADDR,
|
||||
.mask = ST_PRESS_LPS331AP_FS_MASK,
|
||||
.addr = 0x23,
|
||||
.mask = 0x30,
|
||||
.fs_avl = {
|
||||
/*
|
||||
* Pressure and temperature sensitivity values
|
||||
|
|
@ -360,24 +274,27 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
|
|||
},
|
||||
},
|
||||
.bdu = {
|
||||
.addr = ST_PRESS_LPS331AP_BDU_ADDR,
|
||||
.mask = ST_PRESS_LPS331AP_BDU_MASK,
|
||||
.addr = 0x20,
|
||||
.mask = 0x04,
|
||||
},
|
||||
.drdy_irq = {
|
||||
.addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR,
|
||||
.mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK,
|
||||
.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
|
||||
.addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
|
||||
.mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
|
||||
.addr_od = ST_PRESS_LPS331AP_OD_IRQ_ADDR,
|
||||
.mask_od = ST_PRESS_LPS331AP_OD_IRQ_MASK,
|
||||
.addr = 0x22,
|
||||
.mask_int1 = 0x04,
|
||||
.mask_int2 = 0x20,
|
||||
.addr_ihl = 0x22,
|
||||
.mask_ihl = 0x80,
|
||||
.addr_od = 0x22,
|
||||
.mask_od = 0x40,
|
||||
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
|
||||
},
|
||||
.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
|
||||
.multi_read_bit = true,
|
||||
.bootime = 2,
|
||||
},
|
||||
{
|
||||
.wai = ST_PRESS_LPS001WP_WAI_EXP,
|
||||
/*
|
||||
* CUSTOM VALUES FOR LPS001WP SENSOR
|
||||
*/
|
||||
.wai = 0xba,
|
||||
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
||||
.sensors_supported = {
|
||||
[0] = LPS001WP_PRESS_DEV_NAME,
|
||||
|
|
@ -385,17 +302,17 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
|
|||
.ch = (struct iio_chan_spec *)st_press_lps001wp_channels,
|
||||
.num_ch = ARRAY_SIZE(st_press_lps001wp_channels),
|
||||
.odr = {
|
||||
.addr = ST_PRESS_LPS001WP_ODR_ADDR,
|
||||
.mask = ST_PRESS_LPS001WP_ODR_MASK,
|
||||
.addr = 0x20,
|
||||
.mask = 0x30,
|
||||
.odr_avl = {
|
||||
{ 1, ST_PRESS_LPS001WP_ODR_AVL_1HZ_VAL, },
|
||||
{ 7, ST_PRESS_LPS001WP_ODR_AVL_7HZ_VAL, },
|
||||
{ 13, ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL, },
|
||||
{ .hz = 1, .value = 0x01 },
|
||||
{ .hz = 7, .value = 0x02 },
|
||||
{ .hz = 13, .value = 0x03 },
|
||||
},
|
||||
},
|
||||
.pw = {
|
||||
.addr = ST_PRESS_LPS001WP_PW_ADDR,
|
||||
.mask = ST_PRESS_LPS001WP_PW_MASK,
|
||||
.addr = 0x20,
|
||||
.mask = 0x40,
|
||||
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
||||
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
||||
},
|
||||
|
|
@ -413,17 +330,22 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
|
|||
},
|
||||
},
|
||||
.bdu = {
|
||||
.addr = ST_PRESS_LPS001WP_BDU_ADDR,
|
||||
.mask = ST_PRESS_LPS001WP_BDU_MASK,
|
||||
.addr = 0x20,
|
||||
.mask = 0x04,
|
||||
},
|
||||
.drdy_irq = {
|
||||
.addr = 0,
|
||||
},
|
||||
.multi_read_bit = ST_PRESS_LPS001WP_MULTIREAD_BIT,
|
||||
.multi_read_bit = true,
|
||||
.bootime = 2,
|
||||
},
|
||||
{
|
||||
.wai = ST_PRESS_LPS25H_WAI_EXP,
|
||||
/*
|
||||
* CUSTOM VALUES FOR LPS25H SENSOR
|
||||
* See LPS25H datasheet:
|
||||
* http://www2.st.com/resource/en/datasheet/lps25h.pdf
|
||||
*/
|
||||
.wai = 0xbd,
|
||||
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
||||
.sensors_supported = {
|
||||
[0] = LPS25H_PRESS_DEV_NAME,
|
||||
|
|
@ -431,18 +353,18 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
|
|||
.ch = (struct iio_chan_spec *)st_press_1_channels,
|
||||
.num_ch = ARRAY_SIZE(st_press_1_channels),
|
||||
.odr = {
|
||||
.addr = ST_PRESS_LPS25H_ODR_ADDR,
|
||||
.mask = ST_PRESS_LPS25H_ODR_MASK,
|
||||
.addr = 0x20,
|
||||
.mask = 0x70,
|
||||
.odr_avl = {
|
||||
{ 1, ST_PRESS_LPS25H_ODR_AVL_1HZ_VAL, },
|
||||
{ 7, ST_PRESS_LPS25H_ODR_AVL_7HZ_VAL, },
|
||||
{ 13, ST_PRESS_LPS25H_ODR_AVL_13HZ_VAL, },
|
||||
{ 25, ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL, },
|
||||
{ .hz = 1, .value = 0x01 },
|
||||
{ .hz = 7, .value = 0x02 },
|
||||
{ .hz = 13, .value = 0x03 },
|
||||
{ .hz = 25, .value = 0x04 },
|
||||
},
|
||||
},
|
||||
.pw = {
|
||||
.addr = ST_PRESS_LPS25H_PW_ADDR,
|
||||
.mask = ST_PRESS_LPS25H_PW_MASK,
|
||||
.addr = 0x20,
|
||||
.mask = 0x80,
|
||||
.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
|
||||
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
||||
},
|
||||
|
|
@ -460,24 +382,29 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
|
|||
},
|
||||
},
|
||||
.bdu = {
|
||||
.addr = ST_PRESS_LPS25H_BDU_ADDR,
|
||||
.mask = ST_PRESS_LPS25H_BDU_MASK,
|
||||
.addr = 0x20,
|
||||
.mask = 0x04,
|
||||
},
|
||||
.drdy_irq = {
|
||||
.addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR,
|
||||
.mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK,
|
||||
.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
|
||||
.addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
|
||||
.mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
|
||||
.addr_od = ST_PRESS_LPS25H_OD_IRQ_ADDR,
|
||||
.mask_od = ST_PRESS_LPS25H_OD_IRQ_MASK,
|
||||
.addr = 0x23,
|
||||
.mask_int1 = 0x01,
|
||||
.mask_int2 = 0x10,
|
||||
.addr_ihl = 0x22,
|
||||
.mask_ihl = 0x80,
|
||||
.addr_od = 0x22,
|
||||
.mask_od = 0x40,
|
||||
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
|
||||
},
|
||||
.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
|
||||
.multi_read_bit = true,
|
||||
.bootime = 2,
|
||||
},
|
||||
{
|
||||
.wai = ST_PRESS_LPS22HB_WAI_EXP,
|
||||
/*
|
||||
* CUSTOM VALUES FOR LPS22HB SENSOR
|
||||
* See LPS22HB datasheet:
|
||||
* http://www2.st.com/resource/en/datasheet/lps22hb.pdf
|
||||
*/
|
||||
.wai = 0xb1,
|
||||
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
|
||||
.sensors_supported = {
|
||||
[0] = LPS22HB_PRESS_DEV_NAME,
|
||||
|
|
@ -485,19 +412,19 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
|
|||
.ch = (struct iio_chan_spec *)st_press_lps22hb_channels,
|
||||
.num_ch = ARRAY_SIZE(st_press_lps22hb_channels),
|
||||
.odr = {
|
||||
.addr = ST_PRESS_LPS22HB_ODR_ADDR,
|
||||
.mask = ST_PRESS_LPS22HB_ODR_MASK,
|
||||
.addr = 0x10,
|
||||
.mask = 0x70,
|
||||
.odr_avl = {
|
||||
{ 1, ST_PRESS_LPS22HB_ODR_AVL_1HZ_VAL, },
|
||||
{ 10, ST_PRESS_LPS22HB_ODR_AVL_10HZ_VAL, },
|
||||
{ 25, ST_PRESS_LPS22HB_ODR_AVL_25HZ_VAL, },
|
||||
{ 50, ST_PRESS_LPS22HB_ODR_AVL_50HZ_VAL, },
|
||||
{ 75, ST_PRESS_LPS22HB_ODR_AVL_75HZ_VAL, },
|
||||
{ .hz = 1, .value = 0x01 },
|
||||
{ .hz = 10, .value = 0x02 },
|
||||
{ .hz = 25, .value = 0x03 },
|
||||
{ .hz = 50, .value = 0x04 },
|
||||
{ .hz = 75, .value = 0x05 },
|
||||
},
|
||||
},
|
||||
.pw = {
|
||||
.addr = ST_PRESS_LPS22HB_PW_ADDR,
|
||||
.mask = ST_PRESS_LPS22HB_PW_MASK,
|
||||
.addr = 0x10,
|
||||
.mask = 0x70,
|
||||
.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
|
||||
},
|
||||
.fs = {
|
||||
|
|
@ -514,20 +441,20 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
|
|||
},
|
||||
},
|
||||
.bdu = {
|
||||
.addr = ST_PRESS_LPS22HB_BDU_ADDR,
|
||||
.mask = ST_PRESS_LPS22HB_BDU_MASK,
|
||||
.addr = 0x10,
|
||||
.mask = 0x02,
|
||||
},
|
||||
.drdy_irq = {
|
||||
.addr = ST_PRESS_LPS22HB_DRDY_IRQ_ADDR,
|
||||
.mask_int1 = ST_PRESS_LPS22HB_DRDY_IRQ_INT1_MASK,
|
||||
.mask_int2 = ST_PRESS_LPS22HB_DRDY_IRQ_INT2_MASK,
|
||||
.addr_ihl = ST_PRESS_LPS22HB_IHL_IRQ_ADDR,
|
||||
.mask_ihl = ST_PRESS_LPS22HB_IHL_IRQ_MASK,
|
||||
.addr_od = ST_PRESS_LPS22HB_OD_IRQ_ADDR,
|
||||
.mask_od = ST_PRESS_LPS22HB_OD_IRQ_MASK,
|
||||
.addr = 0x12,
|
||||
.mask_int1 = 0x04,
|
||||
.mask_int2 = 0x08,
|
||||
.addr_ihl = 0x12,
|
||||
.mask_ihl = 0x80,
|
||||
.addr_od = 0x12,
|
||||
.mask_od = 0x40,
|
||||
.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
|
||||
},
|
||||
.multi_read_bit = ST_PRESS_LPS22HB_MULTIREAD_BIT,
|
||||
.multi_read_bit = true,
|
||||
},
|
||||
};
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user