AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

arm64: dts: meson: g12a: Add G12A USB nodes

Browse Source 
This patch adds the nodes for the USB Complex found in the Amlogic
G12A SoC.

It includes the :
- 2 USB2 PHYs
- 1 USB3 + PCIE Combo PHY
- the USB Glue with it's DWC2 and DWC3 sub-nodes

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This commit is contained in:
Neil Armstrong 2019-03-25 11:03:38 +01:00 committed by Kevin Hilman
parent 820873cf38
commit 9baf7d6be7
1 changed files with 75 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

75
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
View File

@ -3,11 +3,13 @@
* Copyright (c) 2018 Amlogic, Inc. All rights reserved.
*/
#include <dt-bindings/phy/phy.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/g12a-clkc.h>
#include <dt-bindings/clock/g12a-aoclkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
/ {
compatible = "amlogic,g12a";
@ -183,6 +185,26 @@ mux {
};
};
usb2_phy0: phy@36000 {
compatible = "amlogic,g12a-usb2-phy";
reg = <0x0 0x36000 0x0 0x2000>;
clocks = <&xtal>;
clock-names = "xtal";
resets = <&reset RESET_USB_PHY20>;
reset-names = "phy";
#phy-cells = <0>;
};
usb2_phy1: phy@3a000 {
compatible = "amlogic,g12a-usb2-phy";
reg = <0x0 0x3a000 0x0 0x2000>;
clocks = <&xtal>;
clock-names = "xtal";
resets = <&reset RESET_USB_PHY21>;
reset-names = "phy";
#phy-cells = <0>;
};
hiu: bus@3c000 {
compatible = "simple-bus";
reg = <0x0 0x3c000 0x0 0x1400>;
@ -203,6 +225,18 @@ clkc: clock-controller {
};
};
};
usb3_pcie_phy: phy@46000 {
compatible = "amlogic,g12a-usb3-pcie-phy";
reg = <0x0 0x46000 0x0 0x2000>;
clocks = <&clkc CLKID_PCIE_PLL>;
clock-names = "ref_clk";
resets = <&reset RESET_PCIE_PHY>;
reset-names = "phy";
assigned-clocks = <&clkc CLKID_PCIE_PLL>;
assigned-clock-rates = <100000000>;
#phy-cells = <1>;
};
};
aobus: bus@ff800000 {
@ -366,6 +400,47 @@ uart_A: serial@24000 {
status = "disabled";
};
};
usb: usb@ffe09000 {
status = "disabled";
compatible = "amlogic,meson-g12a-usb-ctrl";
reg = <0x0 0xffe09000 0x0 0xa0>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&clkc CLKID_USB>;
resets = <&reset RESET_USB>;
dr_mode = "otg";
phys = <&usb2_phy0>, <&usb2_phy1>,
<&usb3_pcie_phy PHY_TYPE_USB3>;
phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
dwc2: usb@ff400000 {
compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
reg = <0x0 0xff400000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "ddr";
phys = <&usb2_phy1>;
dr_mode = "peripheral";
g-rx-fifo-size = <192>;
g-np-tx-fifo-size = <128>;
g-tx-fifo-size = <128 128 16 16 16>;
};
dwc3: usb@ff500000 {
compatible = "snps,dwc3";
reg = <0x0 0xff500000 0x0 0x100000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,dis_u2_susphy_quirk;
snps,quirk-frame-length-adjustment;
};
};
};
timer {