AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

phy: rockchip-usb: Add vbus regulator support.

Browse Source 
On rockchip devices vbus is supplied by a separate power supply, often
through a regulator. Add support for describing the the regulator in
device-tree following the same convention as several other usb phy's.

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Sjoerd Simons 2017-04-05 16:06:10 +02:00 committed by Kishon Vijay Abraham I
parent fff3364a63
commit 9d685ed77b
2 changed files with 20 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
View File

@ -30,6 +30,7 @@ Optional Properties:
- reset-names: Only allow the following entries:
- phy-reset
- resets: Must contain an entry for each entry in reset-names.
- vbus-supply: power-supply phandle for vbus power source
Example:

19
drivers/phy/phy-rockchip-usb.c
View File

@ -66,6 +66,7 @@ struct rockchip_usb_phy {
struct phy *phy;
bool uart_enabled;
struct reset_control *reset;
struct regulator *vbus;
};
static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
@ -88,6 +89,9 @@ static void rockchip_usb_phy480m_disable(struct clk_hw *hw)
struct rockchip_usb_phy,
clk480m_hw);
if (phy->vbus)
regulator_disable(phy->vbus);
/* Power down usb phy analog blocks by set siddq 1 */
rockchip_usb_phy_power(phy, 1);
}
@ -143,6 +147,14 @@ static int rockchip_usb_phy_power_on(struct phy *_phy)
if (phy->uart_enabled)
return -EBUSY;
if (phy->vbus) {
int ret;
ret = regulator_enable(phy->vbus);
if (ret)
return ret;
}
return clk_prepare_enable(phy->clk480m);
}
@ -268,6 +280,13 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
}
phy_set_drvdata(rk_phy->phy, rk_phy);
rk_phy->vbus = devm_regulator_get_optional(&rk_phy->phy->dev, "vbus");
if (IS_ERR(rk_phy->vbus)) {
if (PTR_ERR(rk_phy->vbus) == -EPROBE_DEFER)
return PTR_ERR(rk_phy->vbus);
rk_phy->vbus = NULL;
}
/*
* When acting as uart-pipe, just keep clock on otherwise
* only power up usb phy when it use, so disable it when init