AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

sh_eth: add R-Car support for real

Browse Source 
Commit d0418bb712 (net: sh_eth: Add eth support
for R8A7779 device) was a failed attempt to add support for one of members of
the R-Car SoC family.  That's for three reasons: it treated R8A7779 the  same
as SH7724 except including quite dirty hack adding ECMR_ELB  bit  to the mask
in sh_eth_set_rate() while not removing ECMR_RTM bit (despite it's reserved in
R-Car Ether), and it didn't add a new register offset array despite the closest
SH_ETH_REG_FAST_SH4 mapping differs by 0x200 to the offsets all the R-Car Ether
registers have, and also some of the registers in this old mapping don't exist
on R-Car Ether (due to this, SH7724's 'sh_eth_my_cpu_data' structure is not
adequeate for R-Car too).  Fix all these shortcomings, restoring the SH7724
related section to its pristine state...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Sergei Shtylyov 2013-03-28 11:51:31 +00:00 committed by David S. Miller
parent c0013f6f8b
commit a3f109bd79
2 changed files with 101 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

109
drivers/net/ethernet/renesas/sh_eth.c
View File

@ -2,7 +2,8 @@
* SuperH Ethernet device driver
*
* Copyright (C) 2006-2012 Nobuhiro Iwamatsu
* Copyright (C) 2008-2012 Renesas Solutions Corp.
* Copyright (C) 2008-2013 Renesas Solutions Corp.
* Copyright (C) 2013 Cogent Embedded, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@ -147,6 +148,51 @@ static const u16 sh_eth_offset_gigabit[SH_ETH_MAX_REGISTER_OFFSET] = {
[FWALCR1] = 0x00b4,
};
static const u16 sh_eth_offset_fast_rcar[SH_ETH_MAX_REGISTER_OFFSET] = {
[ECMR] = 0x0300,
[RFLR] = 0x0308,
[ECSR] = 0x0310,
[ECSIPR] = 0x0318,
[PIR] = 0x0320,
[PSR] = 0x0328,
[RDMLR] = 0x0340,
[IPGR] = 0x0350,
[APR] = 0x0354,
[MPR] = 0x0358,
[RFCF] = 0x0360,
[TPAUSER] = 0x0364,
[TPAUSECR] = 0x0368,
[MAHR] = 0x03c0,
[MALR] = 0x03c8,
[TROCR] = 0x03d0,
[CDCR] = 0x03d4,
[LCCR] = 0x03d8,
[CNDCR] = 0x03dc,
[CEFCR] = 0x03e4,
[FRECR] = 0x03e8,
[TSFRCR] = 0x03ec,
[TLFRCR] = 0x03f0,
[RFCR] = 0x03f4,
[MAFCR] = 0x03f8,
[EDMR] = 0x0200,
[EDTRR] = 0x0208,
[EDRRR] = 0x0210,
[TDLAR] = 0x0218,
[RDLAR] = 0x0220,
[EESR] = 0x0228,
[EESIPR] = 0x0230,
[TRSCER] = 0x0238,
[RMFCR] = 0x0240,
[TFTR] = 0x0248,
[FDR] = 0x0250,
[RMCR] = 0x0258,
[TFUCR] = 0x0264,
[RFOCR] = 0x0268,
[FCFTR] = 0x0270,
[TRIMD] = 0x027c,
};
static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = {
[ECMR] = 0x0100,
[RFLR] = 0x0108,
@ -296,7 +342,7 @@ static void sh_eth_select_mii(struct net_device *ndev)
#endif
/* There is CPU dependent code */
#if defined(CONFIG_CPU_SUBTYPE_SH7724) || defined(CONFIG_ARCH_R8A7779)
#if defined(CONFIG_ARCH_R8A7779)
#define SH_ETH_RESET_DEFAULT 1
static void sh_eth_set_duplex(struct net_device *ndev)
{
@ -311,18 +357,60 @@ static void sh_eth_set_duplex(struct net_device *ndev)
static void sh_eth_set_rate(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
unsigned int bits = ECMR_RTM;
#if defined(CONFIG_ARCH_R8A7779)
bits |= ECMR_ELB;
#endif
switch (mdp->speed) {
case 10: /* 10BASE */
sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~bits, ECMR);
sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~ECMR_ELB, ECMR);
break;
case 100:/* 100BASE */
sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | bits, ECMR);
sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | ECMR_ELB, ECMR);
break;
default:
break;
}
}
/* R8A7779 */
static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
.set_duplex = sh_eth_set_duplex,
.set_rate = sh_eth_set_rate,
.ecsr_value = ECSR_PSRTO | ECSR_LCHNG | ECSR_ICD,
.ecsipr_value = ECSIPR_PSRTOIP | ECSIPR_LCHNGIP | ECSIPR_ICDIP,
.eesipr_value = 0x01ff009f,
.tx_check = EESR_FTC | EESR_CND | EESR_DLC | EESR_CD | EESR_RTO,
.eesr_err_check = EESR_TWB | EESR_TABT | EESR_RABT | EESR_RDE |
EESR_RFRMER | EESR_TFE | EESR_TDE | EESR_ECI,
.tx_error_check = EESR_TWB | EESR_TABT | EESR_TDE | EESR_TFE,
.apr = 1,
.mpr = 1,
.tpauser = 1,
.hw_swap = 1,
};
#elif defined(CONFIG_CPU_SUBTYPE_SH7724)
#define SH_ETH_RESET_DEFAULT 1
static void sh_eth_set_duplex(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
if (mdp->duplex) /* Full */
sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | ECMR_DM, ECMR);
else /* Half */
sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~ECMR_DM, ECMR);
}
static void sh_eth_set_rate(struct net_device *ndev)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
switch (mdp->speed) {
case 10: /* 10BASE */
sh_eth_write(ndev, sh_eth_read(ndev, ECMR) & ~ECMR_RTM, ECMR);
break;
case 100:/* 100BASE */
sh_eth_write(ndev, sh_eth_read(ndev, ECMR) | ECMR_RTM, ECMR);
break;
default:
break;
@ -2521,6 +2609,9 @@ static const u16 *sh_eth_get_register_offset(int register_type)
case SH_ETH_REG_GIGABIT:
reg_offset = sh_eth_offset_gigabit;
break;
case SH_ETH_REG_FAST_RCAR:
reg_offset = sh_eth_offset_fast_rcar;
break;
case SH_ETH_REG_FAST_SH4:
reg_offset = sh_eth_offset_fast_sh4;
break;

1
include/linux/sh_eth.h
View File

@ -6,6 +6,7 @@
enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
enum {
SH_ETH_REG_GIGABIT,
SH_ETH_REG_FAST_RCAR,
SH_ETH_REG_FAST_SH4,
SH_ETH_REG_FAST_SH3_SH2
};