diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 2c24eab35b54..23fb9efe20a4 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -114,40 +114,18 @@ static ushort qib_singleport; module_param_named(singleport, qib_singleport, ushort, S_IRUGO); MODULE_PARM_DESC(singleport, "Use only IB port 1; more per-port buffer space"); - -/* - * Setup QMH7342 receive and transmit parameters, necessary because - * each bay, Mez connector, and IB port need different tuning, beyond - * what the switch and HCA can do automatically. - * It's expected to be done by cat'ing files to the modules file, - * rather than setting up as a module parameter. - * It's a "write-only" file, returns 0 when read back. - * The unit, port, bay (if given), and values MUST be done as a single write. - * The unit, port, and bay must precede the values to be effective. - */ -static int setup_qmh_params(const char *, struct kernel_param *); -static unsigned dummy_qmh_params; -module_param_call(qmh_serdes_setup, setup_qmh_params, param_get_uint, - &dummy_qmh_params, S_IWUSR | S_IRUGO); - -/* similarly for QME7342, but it's simpler */ -static int setup_qme_params(const char *, struct kernel_param *); -static unsigned dummy_qme_params; -module_param_call(qme_serdes_setup, setup_qme_params, param_get_uint, - &dummy_qme_params, S_IWUSR | S_IRUGO); - #define MAX_ATTEN_LEN 64 /* plenty for any real system */ /* for read back, default index is ~5m copper cable */ -static char cable_atten_list[MAX_ATTEN_LEN] = "10"; -static struct kparam_string kp_cable_atten = { - .string = cable_atten_list, +static char txselect_list[MAX_ATTEN_LEN] = "10"; +static struct kparam_string kp_txselect = { + .string = txselect_list, .maxlen = MAX_ATTEN_LEN }; -static int setup_cable_atten(const char *, struct kernel_param *); -module_param_call(cable_atten, setup_cable_atten, param_get_string, - &kp_cable_atten, S_IWUSR | S_IRUGO); -MODULE_PARM_DESC(cable_atten, \ - "cable attenuation indices for cables with invalid EEPROM"); +static int setup_txselect(const char *, struct kernel_param *); +module_param_call(txselect, setup_txselect, param_get_string, + &kp_txselect, S_IWUSR | S_IRUGO); +MODULE_PARM_DESC(txselect, \ + "Tx serdes indices (for no QSFP or invalid QSFP data)"); #define BOARD_QME7342 5 #define BOARD_QMH7342 6 @@ -574,11 +552,12 @@ struct vendor_txdds_ent { static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *); #define TXDDS_TABLE_SZ 16 /* number of entries per speed in onchip table */ +#define TXDDS_EXTRA_SZ 11 /* number of extra tx settings entries */ #define SERDES_CHANS 4 /* yes, it's obvious, but one less magic number */ #define H1_FORCE_VAL 8 -#define H1_FORCE_QME 1 /* may be overridden via setup_qme_params() */ -#define H1_FORCE_QMH 7 /* may be overridden via setup_qmh_params() */ +#define H1_FORCE_QME 1 /* may be overridden via setup_txselect() */ +#define H1_FORCE_QMH 7 /* may be overridden via setup_txselect() */ /* The static and dynamic registers are paired, and the pairs indexed by spd */ #define krp_static_adapt_dis(spd) (KREG_IBPORT_IDX(ADAPT_DISABLE_STATIC_SDR) \ @@ -590,15 +569,6 @@ static void write_tx_serdes_param(struct qib_pportdata *, struct txdds_ent *); #define QDR_STATIC_ADAPT_INIT 0xffffffffffULL /* up, disable H0,H1-8, LE */ #define QDR_STATIC_ADAPT_INIT_R1 0xf0ffffffffULL /* r1 up, disable H0,H1-8 */ -static const struct txdds_ent qmh_sdr_txdds = { 11, 0, 5, 6 }; -static const struct txdds_ent qmh_ddr_txdds = { 7, 0, 2, 8 }; -static const struct txdds_ent qmh_qdr_txdds = { 0, 1, 3, 10 }; - -/* this is used for unknown mez cards also */ -static const struct txdds_ent qme_sdr_txdds = { 11, 0, 4, 4 }; -static const struct txdds_ent qme_ddr_txdds = { 7, 0, 2, 7 }; -static const struct txdds_ent qme_qdr_txdds = { 0, 1, 12, 11 }; - struct qib_chippport_specific { u64 __iomem *kpregbase; u64 __iomem *cpregbase; @@ -637,12 +607,8 @@ struct qib_chippport_specific { * Per-bay per-channel rcv QMH H1 values and Tx values for QDR. * entry zero is unused, to simplify indexing */ - u16 h1_val; - u8 amp[SERDES_CHANS]; - u8 pre[SERDES_CHANS]; - u8 mainv[SERDES_CHANS]; - u8 post[SERDES_CHANS]; - u8 no_eep; /* attenuation index to use if no qsfp info */ + u8 h1_val; + u8 no_eep; /* txselect table index to use if no qsfp info */ u8 ipg_tries; u8 ibmalfusesnap; struct qib_qsfp_data qsfp_data; @@ -5360,7 +5326,13 @@ static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) QIBL_IB_AUTONEG_INPROG))) set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { + /* unlock the Tx settings, speed may change */ + qib_write_kreg_port(ppd, krp_tx_deemph_override, + SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + reset_tx_deemphasis_override)); qib_cancel_sends(ppd); + /* on link down, ensure sane pcs state */ + qib_7322_mini_pcs_reset(ppd); spin_lock_irqsave(&ppd->sdma_lock, flags); if (__qib_sdma_running(ppd)) __qib_sdma_process_event(ppd, @@ -5766,26 +5738,28 @@ static void qib_init_7322_qsfp(struct qib_pportdata *ppd) } /* - * called at device initialization time, and also if the cable_atten + * called at device initialization time, and also if the txselect * module parameter is changed. This is used for cables that don't * have valid QSFP EEPROMs (not present, or attenuation is zero). * We initialize to the default, then if there is a specific - * unit,port match, we use that. + * unit,port match, we use that (and set it immediately, for the + * current speed, if the link is at INIT or better). * String format is "default# unit#,port#=# ... u,p=#", separators must - * be a SPACE character. A newline terminates. + * be a SPACE character. A newline terminates. The u,p=# tuples may + * optionally have "u,p=#,#", where the final # is the H1 value * The last specific match is used (actually, all are used, but last * one is the one that winds up set); if none at all, fall back on default. */ static void set_no_qsfp_atten(struct qib_devdata *dd, int change) { char *nxt, *str; - int pidx, unit, port, deflt; + u32 pidx, unit, port, deflt, h1; unsigned long val; - int any = 0; + int any = 0, seth1; - str = cable_atten_list; + str = txselect_list; - /* default number is validated in setup_cable_atten() */ + /* default number is validated in setup_txselect() */ deflt = simple_strtoul(str, &nxt, 0); for (pidx = 0; pidx < dd->num_pports; ++pidx) dd->pport[pidx].cpspec->no_eep = deflt; @@ -5812,16 +5786,28 @@ static void set_no_qsfp_atten(struct qib_devdata *dd, int change) ; continue; } - if (val >= TXDDS_TABLE_SZ) + if (val >= TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ) continue; + seth1 = 0; + h1 = 0; /* gcc thinks it might be used uninitted */ + if (*nxt == ',' && nxt[1]) { + str = ++nxt; + h1 = (u32)simple_strtoul(str, &nxt, 0); + if (nxt == str) + while (*nxt && *nxt++ != ' ') /* skip */ + ; + else + seth1 = 1; + } for (pidx = 0; dd->unit == unit && pidx < dd->num_pports; ++pidx) { - if (dd->pport[pidx].port != port || - !dd->pport[pidx].link_speed_supported) + struct qib_pportdata *ppd = &dd->pport[pidx]; + + if (ppd->port != port || !ppd->link_speed_supported) continue; - dd->pport[pidx].cpspec->no_eep = val; + ppd->cpspec->no_eep = val; /* now change the IBC and serdes, overriding generic */ - init_txdds_table(&dd->pport[pidx], 1); + init_txdds_table(ppd, 1); any++; } if (*nxt == '\n') @@ -5832,35 +5818,35 @@ static void set_no_qsfp_atten(struct qib_devdata *dd, int change) * Change the IBC and serdes, but since it's * general, don't override specific settings. */ - for (pidx = 0; pidx < dd->num_pports; ++pidx) { - if (!dd->pport[pidx].link_speed_supported) - continue; - init_txdds_table(&dd->pport[pidx], 0); - } + for (pidx = 0; pidx < dd->num_pports; ++pidx) + if (dd->pport[pidx].link_speed_supported) + init_txdds_table(&dd->pport[pidx], 0); } } -/* handle the cable_atten parameter changing */ -static int setup_cable_atten(const char *str, struct kernel_param *kp) +/* handle the txselect parameter changing */ +static int setup_txselect(const char *str, struct kernel_param *kp) { struct qib_devdata *dd; unsigned long val; char *n; if (strlen(str) >= MAX_ATTEN_LEN) { - printk(KERN_INFO QIB_DRV_NAME " cable_atten_values string " + printk(KERN_INFO QIB_DRV_NAME " txselect_values string " "too long\n"); return -ENOSPC; } val = simple_strtoul(str, &n, 0); - if (n == str || val >= TXDDS_TABLE_SZ) { + if (n == str || val >= (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) { printk(KERN_INFO QIB_DRV_NAME - "cable_atten_values must start with a number\n"); + "txselect_values must start with a number < %d\n", + TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ); return -EINVAL; } - strcpy(cable_atten_list, str); + strcpy(txselect_list, str); list_for_each_entry(dd, &qib_dev_list, list) - set_no_qsfp_atten(dd, 1); + if (dd->deviceid == PCI_DEVICE_ID_QLOGIC_IB_7322) + set_no_qsfp_atten(dd, 1); return 0; } @@ -6261,28 +6247,17 @@ static int qib_init_7322_variables(struct qib_devdata *dd) * in adapter-specific routines. */ if (!(ppd->dd->flags & QIB_HAS_QSFP)) { - int i; - const struct txdds_ent *txdds; - if (!IS_QMH(ppd->dd) && !IS_QME(ppd->dd)) qib_devinfo(ppd->dd->pcidev, "IB%u:%u: " "Unknown mezzanine card type\n", - ppd->dd->unit, ppd->port); - txdds = IS_QMH(ppd->dd) ? &qmh_qdr_txdds : - &qme_qdr_txdds; - + dd->unit, ppd->port); + cp->h1_val = IS_QMH(dd) ? H1_FORCE_QMH : H1_FORCE_QME; /* - * set values in case link comes up - * before table is written to driver. + * Choose center value as default tx serdes setting + * until changed through module parameter. */ - cp->h1_val = IS_QMH(ppd->dd) ? H1_FORCE_QMH : - H1_FORCE_QME; - for (i = 0; i < SERDES_CHANS; i++) { - cp->amp[i] = txdds->amp; - cp->pre[i] = txdds->pre; - cp->mainv[i] = txdds->main; - cp->post[i] = txdds->post; - } + ppd->cpspec->no_eep = IS_QMH(dd) ? + TXDDS_TABLE_SZ + 2 : TXDDS_TABLE_SZ + 4; } else cp->h1_val = H1_FORCE_VAL; @@ -6299,8 +6274,7 @@ static int qib_init_7322_variables(struct qib_devdata *dd) dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE; dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE; - dd->rhf_offset = - dd->rcvhdrentsize - sizeof(u64) / sizeof(u32); + dd->rhf_offset = dd->rcvhdrentsize - sizeof(u64) / sizeof(u32); /* we always allocate at least 2048 bytes for eager buffers */ dd->rcvegrbufsize = max(mtu, 2048); @@ -7111,8 +7085,8 @@ static const struct txdds_ent txdds_ddr[TXDDS_TABLE_SZ] = { static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = { /* amp, pre, main, post */ { 2, 2, 15, 6 }, /* Loopback */ - { 0, 1, 0, 7 }, /* 2 dB */ - { 0, 1, 0, 9 }, /* 3 dB */ + { 0, 1, 0, 7 }, /* 2 dB (also QMH7342) */ + { 0, 1, 0, 9 }, /* 3 dB (also QMH7342) */ { 0, 1, 0, 11 }, /* 4 dB */ { 0, 1, 0, 13 }, /* 5 dB */ { 0, 1, 0, 15 }, /* 6 dB */ @@ -7128,6 +7102,57 @@ static const struct txdds_ent txdds_qdr[TXDDS_TABLE_SZ] = { { 0, 2, 9, 15 }, /* 16 dB */ }; +/* + * extra entries for use with txselect, for indices >= TXDDS_TABLE_SZ. + * These are mostly used for mez cards going through connectors + * and backplane traces, but can be used to add other "unusual" + * table values as well. + */ +static const struct txdds_ent txdds_extra_sdr[TXDDS_EXTRA_SZ] = { + /* amp, pre, main, post */ + { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 1 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 2 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ + { 0, 0, 0, 11 }, /* QME7342 backplane settings */ +}; + +static const struct txdds_ent txdds_extra_ddr[TXDDS_EXTRA_SZ] = { + /* amp, pre, main, post */ + { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 7 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 8 }, /* QMH7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ + { 0, 0, 0, 13 }, /* QME7342 backplane settings */ +}; + +static const struct txdds_ent txdds_extra_qdr[TXDDS_EXTRA_SZ] = { + /* amp, pre, main, post */ + { 0, 1, 0, 4 }, /* QMH7342 backplane settings */ + { 0, 1, 0, 5 }, /* QMH7342 backplane settings */ + { 0, 1, 0, 6 }, /* QMH7342 backplane settings */ + { 0, 1, 0, 8 }, /* QMH7342 backplane settings */ + { 0, 1, 12, 10 }, /* QME7342 backplane setting */ + { 0, 1, 12, 11 }, /* QME7342 backplane setting */ + { 0, 1, 12, 12 }, /* QME7342 backplane setting */ + { 0, 1, 12, 14 }, /* QME7342 backplane setting */ + { 0, 1, 12, 6 }, /* QME7342 backplane setting */ + { 0, 1, 12, 7 }, /* QME7342 backplane setting */ + { 0, 1, 12, 8 }, /* QME7342 backplane setting */ +}; + static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds, unsigned atten) { @@ -7145,7 +7170,7 @@ static const struct txdds_ent *get_atten_table(const struct txdds_ent *txdds, } /* - * if override is set, the module parameter cable_atten has a value + * if override is set, the module parameter txselect has a value * for this specific port, so use it, rather than our normal mechanism. */ static void find_best_ent(struct qib_pportdata *ppd, @@ -7184,15 +7209,28 @@ static void find_best_ent(struct qib_pportdata *ppd, *ddr_dds = get_atten_table(txdds_ddr, qd->atten[0]); *qdr_dds = get_atten_table(txdds_qdr, qd->atten[1]); return; - } else { + } else if (ppd->cpspec->no_eep < TXDDS_TABLE_SZ) { /* * If we have no (or incomplete) data from the cable - * EEPROM, or no QSFP, use the module parameter value - * to index into the attentuation table. + * EEPROM, or no QSFP, or override is set, use the + * module parameter value to index into the attentuation + * table. */ - *sdr_dds = &txdds_sdr[ppd->cpspec->no_eep]; - *ddr_dds = &txdds_ddr[ppd->cpspec->no_eep]; - *qdr_dds = &txdds_qdr[ppd->cpspec->no_eep]; + idx = ppd->cpspec->no_eep; + *sdr_dds = &txdds_sdr[idx]; + *ddr_dds = &txdds_ddr[idx]; + *qdr_dds = &txdds_qdr[idx]; + } else if (ppd->cpspec->no_eep < (TXDDS_TABLE_SZ + TXDDS_EXTRA_SZ)) { + /* similar to above, but index into the "extra" table. */ + idx = ppd->cpspec->no_eep - TXDDS_TABLE_SZ; + *sdr_dds = &txdds_extra_sdr[idx]; + *ddr_dds = &txdds_extra_ddr[idx]; + *qdr_dds = &txdds_extra_qdr[idx]; + } else { + /* this shouldn't happen, it's range checked */ + *sdr_dds = txdds_sdr + qib_long_atten; + *ddr_dds = txdds_ddr + qib_long_atten; + *qdr_dds = txdds_qdr + qib_long_atten; } } @@ -7203,33 +7241,24 @@ static void init_txdds_table(struct qib_pportdata *ppd, int override) int idx; int single_ent = 0; - if (IS_QMH(ppd->dd)) { - /* normally will be overridden, via setup_qmh() */ - sdr_dds = &qmh_sdr_txdds; - ddr_dds = &qmh_ddr_txdds; - qdr_dds = &qmh_qdr_txdds; + find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override); + + /* for mez cards or override, use the selected value for all entries */ + if (!(ppd->dd->flags & QIB_HAS_QSFP) || override) single_ent = 1; - } else if (IS_QME(ppd->dd)) { - sdr_dds = &qme_sdr_txdds; - ddr_dds = &qme_ddr_txdds; - qdr_dds = &qme_qdr_txdds; - single_ent = 1; - } else - find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, override); /* Fill in the first entry with the best entry found. */ set_txdds(ppd, 0, sdr_dds); set_txdds(ppd, TXDDS_TABLE_SZ, ddr_dds); set_txdds(ppd, 2 * TXDDS_TABLE_SZ, qdr_dds); - - /* - * for our current speed, also write that value into the - * tx serdes registers. - */ - dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ? - qdr_dds : (ppd->link_speed_active == - QIB_IB_DDR ? ddr_dds : sdr_dds)); - write_tx_serdes_param(ppd, dds); + if (ppd->lflags & (QIBL_LINKINIT | QIBL_LINKARMED | + QIBL_LINKACTIVE)) { + dds = (struct txdds_ent *)(ppd->link_speed_active == + QIB_IB_QDR ? qdr_dds : + (ppd->link_speed_active == + QIB_IB_DDR ? ddr_dds : sdr_dds)); + write_tx_serdes_param(ppd, dds); + } /* Fill in the remaining entries with the default table values. */ for (idx = 1; idx < ARRAY_SIZE(txdds_sdr); ++idx) { @@ -7352,6 +7381,11 @@ static int serdes_7322_init(struct qib_pportdata *ppd) */ init_txdds_table(ppd, 0); + /* ensure no tx overrides from earlier driver loads */ + qib_write_kreg_port(ppd, krp_tx_deemph_override, + SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + reset_tx_deemphasis_override)); + /* Patch some SerDes defaults to "Better for IB" */ /* Timing Loop Bandwidth: cdr_timing[11:9] = 0 */ ibsd_wr_allchans(ppd, 2, 0, BMASK(11, 9)); @@ -7421,7 +7455,7 @@ static int serdes_7322_init(struct qib_pportdata *ppd) QDR_STATIC_ADAPT_DOWN_R1 : QDR_STATIC_ADAPT_DOWN); ppd->cpspec->qdr_dfe_on = 1; - /* (FLoop LOS gate: PPM filter enabled */ + /* FLoop LOS gate: PPM filter enabled */ ibsd_wr_allchans(ppd, 38, 0 << 10, 1 << 10); /* rx offset center enabled */ @@ -7486,68 +7520,39 @@ static void write_tx_serdes_param(struct qib_pportdata *ppd, SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txc0_ena) | SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcp1_ena) | SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena)); - deemph |= 1ULL << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, - tx_override_deemphasis_select); - deemph |= txdds->amp << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, - txampcntl_d2a); - deemph |= txdds->main << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, - txc0_ena); - deemph |= txdds->post << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, - txcp1_ena); - deemph |= txdds->pre << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + + deemph |= SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + tx_override_deemphasis_select); + deemph |= (txdds->amp & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txampcntl_d2a)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txampcntl_d2a); + deemph |= (txdds->main & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txc0_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txc0_ena); + deemph |= (txdds->post & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txcp1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txcp1_ena); + deemph |= (txdds->pre & SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, + txcn1_ena)) << SYM_LSB(IBSD_TX_DEEMPHASIS_OVERRIDE_0, txcn1_ena); qib_write_kreg_port(ppd, krp_tx_deemph_override, deemph); } /* - * set per-bay, per channel parameters. For now, we ignore - * do_tx, and always set tx parameters, and set them with the same value - * for all channels, using the channel 0 value. We may switch to - * per-channel settings in the future, and that method only needs - * to be done once. - * Because this also writes the IBC txdds table with a single set - * of values, it should be called only for cases where we want to completely - * force a specific setting, typically only for mez cards. + * Set the parameters for mez cards on link bounce, so they are + * always exactly what was requested. Similar logic to init_txdds + * but does just the serdes. */ static void adj_tx_serdes(struct qib_pportdata *ppd) { - struct txdds_ent txdds; - int i; - u8 *amp, *pre, *mainv, *post; + const struct txdds_ent *sdr_dds, *ddr_dds, *qdr_dds; + struct txdds_ent *dds; - /* - * Because we use TX_DEEMPHASIS_OVERRIDE, we need to - * always do tx side, just like H1, since it is cleared - * by link down - */ - amp = ppd->cpspec->amp; - pre = ppd->cpspec->pre; - mainv = ppd->cpspec->mainv; - post = ppd->cpspec->post; - - amp[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, - txampcntl_d2a); - mainv[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, - txc0_ena); - post[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, - txcp1_ena); - pre[0] &= SYM_RMASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, - txcn1_ena); - - /* - * Use the channel zero values, only, for now, for - * all channels - */ - txdds.amp = amp[0]; - txdds.pre = pre[0]; - txdds.main = mainv[0]; - txdds.post = post[0]; - - /* write the QDR table for IBC use, as backup for link down */ - for (i = 0; i < ARRAY_SIZE(txdds_qdr); ++i) - set_txdds(ppd, i + 32, &txdds); - - write_tx_serdes_param(ppd, &txdds); + find_best_ent(ppd, &sdr_dds, &ddr_dds, &qdr_dds, 1); + dds = (struct txdds_ent *)(ppd->link_speed_active == QIB_IB_QDR ? + qdr_dds : (ppd->link_speed_active == QIB_IB_DDR ? + ddr_dds : sdr_dds)); + write_tx_serdes_param(ppd, dds); } /* set QDR forced value for H1, if needed */ @@ -7567,235 +7572,6 @@ static void force_h1(struct qib_pportdata *ppd) } } -/* - * Parse the parameters for the QMH7342, to get rx and tx serdes - * settings for that Bay, for both possible mez connectors (PCIe bus) - * and IB link (one link on mez1, two possible on mez2). - * - * Data is comma or white space separated. - * - * A set of data has 7 groups, rx and tx groups have SERDES_CHANS values, - * one per IB lane (serdes channel). - * The groups are Bay, bus# H1 rcv, and amp, pre, post, main Tx values (QDR). - * The Bay # is used only for debugging currently. - * H1 values are set whenever the link goes down, or is at cfg_test or - * cfg_wait_enh. Tx values are programmed once, when this routine is called - * (and with default values at chip initialization). Values are any base, in - * strtoul style, and values are seperated by comma, or any white space - * (space, tab, newline). - * - * An example set might look like this (white space vs - * comma used for human ease of reading) - * The ordering is a set of Bay# Bus# H1, amp, pre, post, and main for mez1 IB1, - * repeat for mez2 IB1, then mez2 IB2. - * - * B B H1:0 amp:0 pre:0 post: 0 main:0 - * a u H1: 1 amp: 1 pre: 1 post: 1 main: 1 - * y s H1: 2 amp: 2 pre: 2 post: 2 main: 2 - * H1: 4 amp: 3 pre: 3 post: 3 main: 3 - * 1 3 8,6,5,6 0,0,0,0 1,1,1,1 10,10,10,10 3,3,3,3 - * 1 6 7,6,6,7 0,0,0,0 1,1,1,1 10,10,10,10 3,3,3,3 - * 1 6 9,7,7,8 0,0,0,0 1,1,1,1 10,10,10,10 3,3,3,3 - */ -#define N_QMH_FIELDS 22 -static int setup_qmh_params(const char *str, struct kernel_param *kp) -{ - char *abuf, *v, *nv, *nvp; - struct qib_devdata *dd; - struct qib_pportdata *ppd; - u32 mez, vlen, nf, port, bay; - int ret = 0, found = 0; - - vlen = strlen(str) + 1; - abuf = kmalloc(vlen, GFP_KERNEL); - if (!abuf) { - printk(KERN_INFO QIB_DRV_NAME - " Unable to allocate QMH param buffer; ignoring\n"); - return 0; - } - memcpy(abuf, str, vlen); - v = abuf; - - /* these 3 are because gcc can't know they are set before used */ - port = 1; - mez = 1; /* used only for debugging */ - bay = 0; /* used only for debugging */ - ppd = NULL; - for (nf = 0; (nv = strsep(&v, ", \t\n\r")) && - nf < (N_QMH_FIELDS * 3);) { - u32 val; - - if (!*nv) - /* allow for multiple separators */ - continue; - - val = simple_strtoul(nv, &nvp, 0); - if (nv == nvp) { - printk(KERN_INFO QIB_DRV_NAME - " Bay%u, mez%u IB%u non-numeric value (%s) " - "field #%u, ignoring rest\n", bay, mez, - port, nv, nf % (N_QMH_FIELDS * 3)); - ret = -EINVAL; - goto bail; - } - if (!(nf % N_QMH_FIELDS)) { - ppd = NULL; - bay = val; - if (!bay || bay > 16) { - printk(KERN_INFO QIB_DRV_NAME - " Invalid bay # %u, field %u, " - "ignoring rest\n", bay, nf); - ret = -EINVAL; - goto bail; - } - } else if ((nf % N_QMH_FIELDS) == 1) { - u32 bus = val; - if (nf == 1) { - mez = 1; - port = 1; - } else if (nf == (N_QMH_FIELDS + 1)) { - mez = 2; - port = 1; - } else { - mez = 2; - port = 2; - } - list_for_each_entry(dd, &qib_dev_list, list) { - if (dd->deviceid != PCI_DEVICE_ID_QLOGIC_IB_7322 - || !IS_QMH(dd)) - continue; /* only for QMH cards */ - if (dd->pcidev->bus->number == bus) { - found++; - ppd = &dd->pport[port - 1]; - } - } - } else if (ppd) { - u32 parm = (nf % N_QMH_FIELDS) - 2; - if (parm < SERDES_CHANS && !(parm % SERDES_CHANS)) - ppd->cpspec->h1_val = val; - else if (parm < (2 * SERDES_CHANS)) - ppd->cpspec->amp[parm % SERDES_CHANS] = val; - else if (parm < (3 * SERDES_CHANS)) - ppd->cpspec->pre[parm % SERDES_CHANS] = val; - else if (parm < (4 * SERDES_CHANS)) - ppd->cpspec->post[parm % SERDES_CHANS] = val; - else { - ppd->cpspec->mainv[parm % SERDES_CHANS] = val; - /* At the end of a port, set params */ - if (parm == ((5 * SERDES_CHANS) - 1)) - adj_tx_serdes(ppd); - } - } - nf++; - } - if (!found) { - printk(KERN_ERR QIB_DRV_NAME - ": No match found for qmh_serdes_setup parameter\n"); - ret = -EINVAL; - } -bail: - kfree(abuf); - return ret; -} - -/* - * Similarly for QME7342, but the format is simpler, values are the - * same for all mez card positions in a blade (2 or 4 per blade), but - * are different for some blades vs others, and we don't need to - * specify different parameters for different serdes channels or different - * IB ports. - * Format is: h1 amp,pre,post,main - * Alternate format (so ports can be different): Pport# h1 amp,pre,post,main - */ -#define N_QME_FIELDS 5 -static int setup_qme_params(const char *str, struct kernel_param *kp) -{ - char *abuf, *v, *nv, *nvp; - struct qib_devdata *dd; - u32 vlen, nf, port = 0; - u8 h1, tx[4]; /* amp, pre, post, main */ - int ret = -EINVAL; - char *seplist; - - vlen = strlen(str) + 1; - abuf = kmalloc(vlen, GFP_KERNEL); - if (!abuf) { - printk(KERN_INFO QIB_DRV_NAME - " Unable to allocate QME param buffer; ignoring\n"); - return 0; - } - strncpy(abuf, str, vlen); - - v = abuf; - seplist = " \t"; - h1 = H1_FORCE_QME; /* gcc can't figure out always set before used */ - - for (nf = 0; (nv = strsep(&v, seplist)); ) { - u32 val; - - if (!*nv) - /* allow for multiple separators */ - continue; - - if (!nf && *nv == 'P') { - /* alternate format with port */ - val = simple_strtoul(++nv, &nvp, 0); - if (nv == nvp || port >= NUM_IB_PORTS) { - printk(KERN_INFO QIB_DRV_NAME - " %s: non-numeric port value (%s) " - "ignoring rest\n", __func__, nv); - goto done; - } - port = val; - continue; /* without incrementing nf */ - } - val = simple_strtoul(nv, &nvp, 0); - if (nv == nvp) { - printk(KERN_INFO QIB_DRV_NAME - " %s: non-numeric value (%s) " - "field #%u, ignoring rest\n", __func__, - nv, nf); - goto done; - } - if (!nf) { - h1 = val; - seplist = ","; - } else - tx[nf - 1] = val; - if (++nf == N_QME_FIELDS) { - list_for_each_entry(dd, &qib_dev_list, list) { - int pidx, i; - if (dd->deviceid != PCI_DEVICE_ID_QLOGIC_IB_7322 - || !IS_QME(dd)) - continue; /* only for QME cards */ - for (pidx = 0; pidx < dd->num_pports; ++pidx) { - struct qib_pportdata *ppd; - ppd = &dd->pport[pidx]; - if ((port && ppd->port != port) || - !ppd->link_speed_supported) - continue; - ppd->cpspec->h1_val = h1; - for (i = 0; i < SERDES_CHANS; i++) { - ppd->cpspec->amp[i] = tx[0]; - ppd->cpspec->pre[i] = tx[1]; - ppd->cpspec->post[i] = tx[2]; - ppd->cpspec->mainv[i] = tx[3]; - } - adj_tx_serdes(ppd); - } - } - ret = 0; - goto done; - } - } - printk(KERN_INFO QIB_DRV_NAME - " %s: Only %u of %u fields provided, skipping\n", - __func__, nf, N_QME_FIELDS); -done: - kfree(abuf); - return ret; -} - #define SJA_EN SYM_MASK(SPC_JTAG_ACCESS_REG, SPC_JTAG_ACCESS_EN) #define BISTEN_LSB SYM_LSB(SPC_JTAG_ACCESS_REG, bist_en)