AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Merge branches 'pxa-ian' and 'pxa-xm270' into pxa

Browse Source 
Conflicts:

	MAINTAINERS
This commit is contained in:
Russell King 2008-07-12 21:42:04 +01:00 committed by Russell King
commit a9da4f7ed6
14 changed files with 771 additions and 416 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

28
MAINTAINERS
View File

@ -475,28 +475,34 @@ M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT
P: Mike Rapoport
M: mike@compulab.co.il
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/CORGI MACHINE SUPPORT
P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
P: Daniel Ribeiro
M: drwyrm@gmail.com
P: Stefan Schmidt
M: stefan@openezx.org
P: Harald Welte
M: laforge@openezx.org
L: openezx-devel@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
P: Lennert Buytenhek
M: kernel@wantstofly.org
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
P: Daniel Ribeiro
M: drwyrm@gmail.com
P: Stefan Schmidt
M: stefan@openezx.org
P: Harald Welte
M: laforge@openezx.org
L: openezx-devel@lists.openezx.org (subscribers-only)
W: http://www.openezx.org/
S: Maintained
ARM/GUMSTIX MACHINE SUPPORT
P: Steve Sakoman
M: sakoman@gmail.com

2
arch/arm/common/sa1111.c
View File

@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
if (!sachip)
return -ENOMEM;
sachip->clk = clk_get(me, "GPIO27_CLK");
sachip->clk = clk_get(me, "SA1111_CLK");
if (!sachip->clk) {
ret = PTR_ERR(sachip->clk);
goto err_free;

30
arch/arm/mach-pxa/clock.c
View File

@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
EXPORT_SYMBOL(clk_get_rate);
static void clk_gpio27_enable(struct clk *clk)
{
pxa_gpio_mode(GPIO11_3_6MHz_MD);
}
static void clk_gpio27_disable(struct clk *clk)
{
}
static const struct clkops clk_gpio27_ops = {
.enable = clk_gpio27_enable,
.disable = clk_gpio27_disable,
};
void clk_cken_enable(struct clk *clk)
{
CKEN |= 1 << clk->cken;
@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = {
.disable = clk_cken_disable,
};
static struct clk common_clks[] = {
{
.name = "GPIO27_CLK",
.ops = &clk_gpio27_ops,
.rate = 3686400,
},
};
void clks_register(struct clk *clks, size_t num)
{
int i;
@ -148,10 +125,3 @@ void clks_register(struct clk *clks, size_t num)
list_add(&clks[i].node, &clocks);
mutex_unlock(&clocks_mutex);
}
static int __init clk_init(void)
{
clks_register(common_clks, ARRAY_SIZE(common_clks));
return 0;
}
arch_initcall(clk_init);

9
arch/arm/mach-pxa/clock.h
View File

@ -47,6 +47,15 @@ struct clk {
.other = _other, \
}
#define INIT_CLK(_name, _ops, _rate, _delay, _dev) \
{ \
.name = _name, \
.dev = _dev, \
.ops = _ops, \
.rate = _rate, \
.delay = _delay, \
}
extern const struct clkops clk_cken_ops;
void clk_cken_enable(struct clk *clk);

27
arch/arm/mach-pxa/cm-x270-pci.c
View File

@ -5,7 +5,7 @@
*
* Bits taken from various places.
*
* Copyright (C) 2007 Compulab, Ltd.
* Copyright (C) 2007, 2008 Compulab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@ -19,16 +19,16 @@
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/mach/pci.h>
#include <asm/arch/cm-x270.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/mach-types.h>
#include <asm/hardware/it8152.h>
unsigned long it8152_base_address = CMX270_IT8152_VIRT;
unsigned long it8152_base_address;
static int cmx270_it8152_irq_gpio;
/*
* Only first 64MB of memory can be accessed via PCI.
@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
unsigned int sz = SZ_64M >> PAGE_SHIFT;
if (machine_is_armcore()) {
pr_info("Adjusting zones for CM-x270\n");
pr_info("Adjusting zones for CM-X270\n");
/*
* Only adjust if > 64M on current system
@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
{
/* clear our parent irq */
GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
it8152_irq_demux(irq, desc);
}
void __cmx270_pci_init_irq(void)
void __cmx270_pci_init_irq(int irq_gpio)
{
it8152_init_irq();
pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
cmx270_it8152_irq_demux);
cmx270_it8152_irq_gpio = irq_gpio;
set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING);
set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
}
#ifdef CONFIG_PM
@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
/*
Here comes the ugly part. The routing is baseboard specific,
but defining a platform for each possible base of CM-x270 is
unrealistic. Here we keep mapping for ATXBase and SB-x270.
but defining a platform for each possible base of CM-X270 is
unrealistic. Here we keep mapping for ATXBase and SB-X270.
*/
/* ATXBASE PCI slot */
if (slot == 7)

14
arch/arm/mach-pxa/cm-x270-pci.h
View File

@ -1,13 +1,13 @@
extern void __cmx270_pci_init_irq(void);
extern void __cmx270_pci_init_irq(int irq_gpio);
extern void __cmx270_pci_suspend(void);
extern void __cmx270_pci_resume(void);
#ifdef CONFIG_PCI
#define cmx270_pci_init_irq __cmx270_pci_init_irq
#define cmx270_pci_suspend __cmx270_pci_suspend
#define cmx270_pci_resume __cmx270_pci_resume
#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
#else
#define cmx270_pci_init_irq() do {} while (0)
#define cmx270_pci_suspend() do {} while (0)
#define cmx270_pci_resume() do {} while (0)
#define cmx270_pci_init_irq(x) do {} while (0)
#define cmx270_pci_suspend(x) do {} while (0)
#define cmx270_pci_resume(x) do {} while (0)
#endif

407
arch/arm/mach-pxa/cm-x270.c
View File

@ -1,7 +1,7 @@
/*
* linux/arch/arm/mach-pxa/cm-x270.c
*
* Copyright (C) 2007 CompuLab, Ltd.
* Copyright (C) 2007, 2008 CompuLab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@ -9,44 +9,156 @@
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/pm.h>
#include <linux/fb.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/sysdev.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
#include <linux/serial_8250.h>
#include <video/mbxfb.h>
#include <linux/leds.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
#include <asm/arch/bitfield.h>
#include <asm/arch/cm-x270.h>
#include <asm/hardware/it8152.h>
#include "generic.h"
#include "cm-x270-pci.h"
/* virtual addresses for statically mapped regions */
#define CMX270_VIRT_BASE (0xe8000000)
#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
#define RTC_PHYS_BASE (PXA_CS1_PHYS + (5 << 22))
#define DM9000_PHYS_BASE (PXA_CS1_PHYS + (6 << 22))
static struct resource cmx270_dm9k_resource[] = {
/* GPIO IRQ usage */
#define GPIO10_ETHIRQ (10)
#define GPIO22_IT8152_IRQ (22)
#define GPIO83_MMC_IRQ (83)
#define GPIO95_GFXIRQ (95)
#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ)
#define CMX270_IT8152_IRQ IRQ_GPIO(GPIO22_IT8152_IRQ)
#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
#define CMX270_GFXIRQ IRQ_GPIO(GPIO95_GFXIRQ)
/* MMC power enable */
#define GPIO105_MMC_POWER (105)
static unsigned long cmx270_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO98_AC97_SYSCLK,
GPIO113_AC97_nRESET,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* MCI controller */
GPIO32_MMC_CLK,
GPIO112_MMC_CMD,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* SSP1 */
GPIO23_SSP1_SCLK,
GPIO24_SSP1_SFRM,
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
/* SSP2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO87_SSP2_TXD,
GPIO88_SSP2_RXD,
/* PC Card */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO85_nPCE_1,
GPIO54_nPCE_2,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
/* SDRAM and local bus */
GPIO15_nCS_1,
GPIO78_nCS_2,
GPIO79_nCS_3,
GPIO80_nCS_4,
GPIO33_nCS_5,
GPIO49_nPWE,
GPIO18_RDY,
/* GPIO */
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
GPIO53_GPIO, /* PC card reset */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
GPIO89_GPIO, /* NAND Ready/Busy */
/* interrupts */
GPIO10_GPIO, /* DM9000 interrupt */
GPIO83_GPIO, /* MMC card detect */
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource cmx270_dm9000_resource[] = {
[0] = {
.start = DM9000_PHYS_BASE,
.end = DM9000_PHYS_BASE + 4,
@ -64,31 +176,45 @@ static struct resource cmx270_dm9k_resource[] = {
}
};
/* for the moment we limit ourselves to 32bit IO until some
* better IO routines can be written and tested
*/
static struct dm9000_plat_data cmx270_dm9k_platdata = {
static struct dm9000_plat_data cmx270_dm9000_platdata = {
.flags = DM9000_PLATF_32BITONLY,
};
/* Ethernet device */
static struct platform_device cmx270_device_dm9k = {
static struct platform_device cmx270_dm9000_device = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(cmx270_dm9k_resource),
.resource = cmx270_dm9k_resource,
.num_resources = ARRAY_SIZE(cmx270_dm9000_resource),
.resource = cmx270_dm9000_resource,
.dev = {
.platform_data = &cmx270_dm9k_platdata,
.platform_data = &cmx270_dm9000_platdata,
}
};
/* touchscreen controller */
static void __init cmx270_init_dm9000(void)
{
platform_device_register(&cmx270_dm9000_device);
}
#else
static inline void cmx270_init_dm9000(void) {}
#endif
/* UCB1400 touchscreen controller */
#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
static struct platform_device cmx270_ts_device = {
.name = "ucb1400_ts",
.id = -1,
};
/* RTC */
static void __init cmx270_init_touchscreen(void)
{
platform_device_register(&cmx270_ts_device);
}
#else
static inline void cmx270_init_touchscreen(void) {}
#endif
/* V3020 RTC */
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource cmx270_v3020_resource[] = {
[0] = {
.start = RTC_PHYS_BASE,
@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
}
};
/*
* CM-X270 LEDs
*/
static struct platform_device cmx270_led_device = {
.name = "cm-x270-led",
.id = -1,
static void __init cmx270_init_rtc(void)
{
platform_device_register(&cmx270_rtc_device);
}
#else
static inline void cmx270_init_rtc(void) {}
#endif
/* CM-X270 LEDs */
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cmx270_leds[] = {
[0] = {
.name = "cm-x270:red",
.default_trigger = "nand-disk",
.gpio = 93,
.active_low = 1,
},
[1] = {
.name = "cm-x270:green",
.default_trigger = "heartbeat",
.gpio = 94,
.active_low = 1,
},
};
static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
.num_leds = ARRAY_SIZE(cmx270_leds),
.leds = cmx270_leds,
};
static struct platform_device cmx270_led_device = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &cmx270_gpio_led_pdata,
},
};
static void __init cmx270_init_leds(void)
{
platform_device_register(&cmx270_led_device);
}
#else
static inline void cmx270_init_leds(void) {}
#endif
/* 2700G graphics */
#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
static u64 fb_dma_mask = ~(u64)0;
static struct resource cmx270_2700G_resource[] = {
/* frame buffer memory including ODFB and External SDRAM */
[0] = {
.start = MARATHON_PHYS,
.end = MARATHON_PHYS + 0x02000000,
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 0x01ffffff,
.flags = IORESOURCE_MEM,
},
/* Marathon registers */
[1] = {
.start = MARATHON_PHYS + 0x03fe0000,
.end = MARATHON_PHYS + 0x03ffffff,
.start = PXA_CS2_PHYS + 0x03fe0000,
.end = PXA_CS2_PHYS + 0x03ffffff,
.flags = IORESOURCE_MEM,
},
};
@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = {
.id = -1,
};
static u64 ata_dma_mask = ~(u64)0;
static struct platform_device cmx270_ata = {
.name = "pata_cm_x270",
.id = -1,
.dev = {
.dma_mask = &ata_dma_mask,
.coherent_dma_mask = 0xffffffff,
},
};
/* platform devices */
static struct platform_device *platform_devices[] __initdata = {
&cmx270_device_dm9k,
&cmx270_rtc_device,
&cmx270_2700G,
&cmx270_led_device,
&cmx270_ts_device,
&cmx270_ata,
};
/* Map PCI companion and IDE/General Purpose CS statically */
static struct map_desc cmx270_io_desc[] __initdata = {
[0] = { /* IDE/general purpose space */
.virtual = CMX270_IDE104_VIRT,
.pfn = __phys_to_pfn(CMX270_IDE104_PHYS),
.length = SZ_64M - SZ_8M,
.type = MT_DEVICE
},
[1] = { /* PCI bridge */
.virtual = CMX270_IT8152_VIRT,
.pfn = __phys_to_pfn(CMX270_IT8152_PHYS),
.length = SZ_64M,
.type = MT_DEVICE
},
};
static void __init cmx270_init_2700G(void)
{
platform_device_register(&cmx270_2700G);
}
#else
static inline void cmx270_init_2700G(void) {}
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
/*
Display definitions
keep these for backwards compatibility, although symbolic names (as
@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str)
*/
__setup("monitor=", cmx270_set_display);
static void __init cmx270_init_display(void)
{
set_pxa_fb_info(cmx270_display);
}
#else
static inline void cmx270_init_display(void) {}
#endif
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int cmx270_ohci_init(struct device *dev)
{
/* Set the Power Control Polarity Low */
@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
.init = cmx270_ohci_init,
};
static void __init cmx270_init_ohci(void)
{
pxa_set_ohci_info(&cmx270_ohci_platform_data);
}
#else
static inline void cmx270_init_ohci(void) {}
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static int cmx270_mci_init(struct device *dev,
irq_handler_t cmx270_detect_int,
void *data)
{
int err;
/*
* setup GPIO for PXA27x MMC controller
*/
pxa_gpio_mode(GPIO32_MMCCLK_MD);
pxa_gpio_mode(GPIO112_MMCCMD_MD);
pxa_gpio_mode(GPIO92_MMCDAT0_MD);
pxa_gpio_mode(GPIO109_MMCDAT1_MD);
pxa_gpio_mode(GPIO110_MMCDAT2_MD);
pxa_gpio_mode(GPIO111_MMCDAT3_MD);
err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
if (err) {
dev_warn(dev, "power gpio unavailable\n");
return err;
}
/* SB-X270 uses GPIO105 as SD power enable */
pxa_gpio_mode(105 | GPIO_OUT);
/* card detect IRQ on GPIO 83 */
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
gpio_direction_output(GPIO105_MMC_POWER, 0);
err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err)
printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
" request MMC card detect IRQ\n");
if (err) {
gpio_free(GPIO105_MMC_POWER);
dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
" request MMC card detect IRQ\n");
}
return err;
}
@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
struct pxamci_platform_data *p_d = dev->platform_data;
if ((1 << vdd) & p_d->ocr_mask) {
printk(KERN_DEBUG "%s: on\n", __func__);
GPCR(105) = GPIO_bit(105);
dev_dbg(dev, "power on\n");
gpio_set_value(GPIO105_MMC_POWER, 0);
} else {
GPSR(105) = GPIO_bit(105);
printk(KERN_DEBUG "%s: off\n", __func__);
gpio_set_value(GPIO105_MMC_POWER, 1);
dev_dbg(dev, "power off\n");
}
}
static void cmx270_mci_exit(struct device *dev, void *data)
{
free_irq(CMX270_MMC_IRQ, data);
gpio_free(GPIO105_MMC_POWER);
}
static struct pxamci_platform_data cmx270_mci_platform_data = {
@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
.exit = cmx270_mci_exit,
};
static void __init cmx270_init_mmc(void)
{
pxa_set_mci_info(&cmx270_mci_platform_data);
}
#else
static inline void cmx270_init_mmc(void) {}
#endif
#ifdef CONFIG_PM
static unsigned long sleep_save_msc[10];
@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void)
static int __init cmx270_pm_init(void) { return 0; }
#endif
#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
static void __init cmx270_init_ac97(void)
{
pxa_set_ac97_info(NULL);
}
#else
static inline void cmx270_init_ac97(void) {}
#endif
static void __init cmx270_init(void)
{
cmx270_pm_init();
set_pxa_fb_info(cmx270_display);
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
/* register CM-X270 platform devices */
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
/* set MCI and OHCI platform parameters */
pxa_set_mci_info(&cmx270_mci_platform_data);
pxa_set_ohci_info(&cmx270_ohci_platform_data);
/* This enables the STUART */
pxa_gpio_mode(GPIO46_STRXD_MD);
pxa_gpio_mode(GPIO47_STTXD_MD);
/* This enables the BTUART */
pxa_gpio_mode(GPIO42_BTRXD_MD);
pxa_gpio_mode(GPIO43_BTTXD_MD);
pxa_gpio_mode(GPIO44_BTCTS_MD);
pxa_gpio_mode(GPIO45_BTRTS_MD);
cmx270_init_dm9000();
cmx270_init_rtc();
cmx270_init_display();
cmx270_init_mmc();
cmx270_init_ohci();
cmx270_init_ac97();
cmx270_init_touchscreen();
cmx270_init_leds();
cmx270_init_2700G();
}
static void __init cmx270_init_irq(void)
{
pxa27x_init_irq();
cmx270_pci_init_irq();
/* Setup interrupt for dm9000 */
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
/* Setup interrupt for 2700G */
pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
}
#ifdef CONFIG_PCI
/* Map PCI companion statically */
static struct map_desc cmx270_io_desc[] __initdata = {
[0] = { /* PCI bridge */
.virtual = CMX270_IT8152_VIRT,
.pfn = __phys_to_pfn(PXA_CS4_PHYS),
.length = SZ_64M,
.type = MT_DEVICE
},
};
static void __init cmx270_map_io(void)
{
pxa_map_io();
iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
}
it8152_base_address = CMX270_IT8152_VIRT;
}
#else
static void __init cmx270_map_io(void)
{
pxa_map_io();
}
#endif
MACHINE_START(ARMCORE, "Compulab CM-x270")
.boot_params = 0xa0000100,

379
arch/arm/mach-pxa/em-x270.c
View File

@ -1,7 +1,7 @@
/*
* Support for CompuLab EM-x270 platform
* Support for CompuLab EM-X270 platform
*
* Copyright (C) 2007 CompuLab, Ltd.
* Copyright (C) 2007, 2008 CompuLab, Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
@ -14,31 +14,159 @@
#include <linux/dm9000.h>
#include <linux/rtc-v3020.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/pxa27x-udc.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/ohci.h>
#include <asm/arch/mmc.h>
#include <asm/arch/bitfield.h>
#include <asm/arch/pxa27x_keypad.h>
#include "generic.h"
/* GPIO IRQ usage */
#define EM_X270_MMC_PD (105)
#define EM_X270_ETHIRQ IRQ_GPIO(41)
#define EM_X270_MMC_IRQ IRQ_GPIO(13)
#define GPIO41_ETHIRQ (41)
#define GPIO13_MMC_CD (13)
#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
#define EM_X270_MMC_CD IRQ_GPIO(GPIO13_MMC_CD)
static struct resource em_x270_dm9k_resource[] = {
/* NAND control GPIOs */
#define GPIO11_NAND_CS (11)
#define GPIO56_NAND_RB (56)
static unsigned long em_x270_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO98_AC97_SYSCLK,
GPIO113_AC97_nRESET,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* STUART */
GPIO46_STUART_RXD,
GPIO47_STUART_TXD,
/* MCI controller */
GPIO32_MMC_CLK,
GPIO112_MMC_CMD,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* QCI */
GPIO84_CIF_FV,
GPIO25_CIF_LV,
GPIO53_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO81_CIF_DD_0,
GPIO55_CIF_DD_1,
GPIO51_CIF_DD_2,
GPIO50_CIF_DD_3,
GPIO52_CIF_DD_4,
GPIO48_CIF_DD_5,
GPIO17_CIF_DD_6,
GPIO12_CIF_DD_7,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* Keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO34_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO39_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
GPIO91_KP_MKIN_6 | WAKEUP_ON_LEVEL_HIGH,
GPIO36_KP_MKIN_7 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
GPIO96_KP_MKOUT_6,
GPIO22_KP_MKOUT_7,
/* SSP1 */
GPIO26_SSP1_RXD,
GPIO23_SSP1_SCLK,
GPIO24_SSP1_SFRM,
GPIO57_SSP1_TXD,
/* SSP2 */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
/* SDRAM and local bus */
GPIO15_nCS_1,
GPIO78_nCS_2,
GPIO79_nCS_3,
GPIO80_nCS_4,
GPIO49_nPWE,
GPIO18_RDY,
/* GPIO */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
/* power controls */
GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* GPRS_PWEN */
GPIO115_GPIO | MFP_LPM_DRIVE_LOW, /* WLAN_PWEN */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
GPIO56_GPIO, /* NAND Ready/Busy */
/* interrupts */
GPIO13_GPIO, /* MMC card detect */
GPIO41_GPIO, /* DM9000 interrupt */
};
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource em_x270_dm9000_resource[] = {
[0] = {
.start = PXA_CS2_PHYS,
.end = PXA_CS2_PHYS + 3,
@ -56,32 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
}
};
/* for the moment we limit ourselves to 32bit IO until some
* better IO routines can be written and tested
*/
static struct dm9000_plat_data em_x270_dm9k_platdata = {
static struct dm9000_plat_data em_x270_dm9000_platdata = {
.flags = DM9000_PLATF_32BITONLY,
};
/* Ethernet device */
static struct platform_device em_x270_dm9k = {
static struct platform_device em_x270_dm9000 = {
.name = "dm9000",
.id = 0,
.num_resources = ARRAY_SIZE(em_x270_dm9k_resource),
.resource = em_x270_dm9k_resource,
.num_resources = ARRAY_SIZE(em_x270_dm9000_resource),
.resource = em_x270_dm9000_resource,
.dev = {
.platform_data = &em_x270_dm9k_platdata,
.platform_data = &em_x270_dm9000_platdata,
}
};
/* WM9712 touchscreen controller. Hopefully the driver will make it to
* the mainstream sometime */
static struct platform_device em_x270_ts = {
.name = "wm97xx-ts",
.id = -1,
};
static void __init em_x270_init_dm9000(void)
{
platform_device_register(&em_x270_dm9000);
}
#else
static inline void em_x270_init_dm9000(void) {}
#endif
/* RTC */
/* V3020 RTC */
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
static struct resource em_x270_v3020_resource[] = {
[0] = {
.start = PXA_CS4_PHYS,
@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
}
};
/* NAND flash */
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (56)
static void __init em_x270_init_rtc(void)
{
platform_device_register(&em_x270_rtc);
}
#else
static inline void em_x270_init_rtc(void) {}
#endif
/* NAND flash */
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
static inline void nand_cs_on(void)
{
GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
gpio_set_value(GPIO11_NAND_CS, 0);
}
static void nand_cs_off(void)
{
dsb();
GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
gpio_set_value(GPIO11_NAND_CS, 1);
}
/* hardware specific access to control-lines */
@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
{
dsb();
return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
return gpio_get_value(GPIO56_NAND_RB);
}
static struct mtd_partition em_x270_partition_info[] = {
@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
}
};
/* platform devices */
static struct platform_device *platform_devices[] __initdata = {
&em_x270_dm9k,
&em_x270_ts,
&em_x270_rtc,
&em_x270_nand,
};
static void __init em_x270_init_nand(void)
{
int err;
err = gpio_request(GPIO11_NAND_CS, "NAND CS");
if (err) {
pr_warning("EM-X270: failed to request NAND CS gpio\n");
return;
}
gpio_direction_output(GPIO11_NAND_CS, 1);
err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
if (err) {
pr_warning("EM-X270: failed to request NAND R/B gpio\n");
gpio_free(GPIO11_NAND_CS);
return;
}
gpio_direction_input(GPIO56_NAND_RB);
platform_device_register(&em_x270_nand);
}
#else
static inline void em_x270_init_nand(void) {}
#endif
/* PXA27x OHCI controller setup */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static int em_x270_ohci_init(struct device *dev)
{
/* Set the Power Control Polarity Low */
@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
.init = em_x270_ohci_init,
};
static void __init em_x270_init_ohci(void)
{
pxa_set_ohci_info(&em_x270_ohci_platform_data);
}
#else
static inline void em_x270_init_ohci(void) {}
#endif
/* MCI controller setup */
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
static int em_x270_mci_init(struct device *dev,
irq_handler_t em_x270_detect_int,
void *data)
{
int err;
/* setup GPIO for PXA27x MMC controller */
pxa_gpio_mode(GPIO32_MMCCLK_MD);
pxa_gpio_mode(GPIO112_MMCCMD_MD);
pxa_gpio_mode(GPIO92_MMCDAT0_MD);
pxa_gpio_mode(GPIO109_MMCDAT1_MD);
pxa_gpio_mode(GPIO110_MMCDAT2_MD);
pxa_gpio_mode(GPIO111_MMCDAT3_MD);
/* EM-X270 uses GPIO13 as SD power enable */
pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
__func__, err);
@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
static void em_x270_mci_exit(struct device *dev, void *data)
{
free_irq(EM_X270_MMC_IRQ, data);
int irq = gpio_to_irq(GPIO13_MMC_CD);
free_irq(irq, data);
}
static struct pxamci_platform_data em_x270_mci_platform_data = {
@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
.exit = em_x270_mci_exit,
};
static void __init em_x270_init_mmc(void)
{
pxa_set_mci_info(&em_x270_mci_platform_data);
}
#else
static inline void em_x270_init_mmc(void) {}
#endif
/* LCD 480x640 */
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pxafb_mode_info em_x270_lcd_mode = {
.pixclock = 50000,
.bpp = 16,
@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
static struct pxafb_mach_info em_x270_lcd = {
.modes = &em_x270_lcd_mode,
.num_modes = 1,
.cmap_inverse = 0,
.cmap_static = 0,
.lccr0 = LCCR0_PAS,
.lccr3 = LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
static void __init em_x270_init_lcd(void)
{
set_pxa_fb_info(&em_x270_lcd);
}
#else
static inline void em_x270_init_lcd(void) {}
#endif
#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
static void __init em_x270_init_ac97(void)
{
pxa_set_ac97_info(NULL);
}
#else
static inline void em_x270_init_ac97(void) {}
#endif
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static unsigned int em_x270_matrix_keys[] = {
KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
};
struct pxa27x_keypad_platform_data em_x270_keypad_info = {
/* code map for the matrix keys */
.matrix_key_rows = 3,
.matrix_key_cols = 3,
.matrix_key_map = em_x270_matrix_keys,
.matrix_key_map_size = ARRAY_SIZE(em_x270_matrix_keys),
};
static void __init em_x270_init_keypad(void)
{
pxa_set_keypad_info(&em_x270_keypad_info);
}
#else
static inline void em_x270_init_keypad(void) {}
#endif
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
static struct gpio_keys_button gpio_keys_button[] = {
[0] = {
.desc = "sleep/wakeup",
.code = KEY_SUSPEND,
.type = EV_PWR,
.gpio = 1,
.wakeup = 1,
},
};
static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
.buttons = gpio_keys_button,
.nbuttons = 1,
};
static struct platform_device em_x270_gpio_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &em_x270_gpio_keys_data,
},
};
static void __init em_x270_init_gpio_keys(void)
{
platform_device_register(&em_x270_gpio_keys);
}
#else
static inline void em_x270_init_gpio_keys(void) {}
#endif
static void __init em_x270_init(void)
{
/* setup LCD */
set_pxa_fb_info(&em_x270_lcd);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
/* register EM-X270 platform devices */
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
pxa_set_ac97_info(NULL);
/* set MCI and OHCI platform parameters */
pxa_set_mci_info(&em_x270_mci_platform_data);
pxa_set_ohci_info(&em_x270_ohci_platform_data);
/* setup STUART GPIOs */
pxa_gpio_mode(GPIO46_STRXD_MD);
pxa_gpio_mode(GPIO47_STTXD_MD);
/* setup BTUART GPIOs */
pxa_gpio_mode(GPIO42_BTRXD_MD);
pxa_gpio_mode(GPIO43_BTTXD_MD);
pxa_gpio_mode(GPIO44_BTCTS_MD);
pxa_gpio_mode(GPIO45_BTRTS_MD);
/* Setup interrupt for dm9000 */
set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
em_x270_init_dm9000();
em_x270_init_rtc();
em_x270_init_nand();
em_x270_init_lcd();
em_x270_init_mmc();
em_x270_init_ohci();
em_x270_init_keypad();
em_x270_init_gpio_keys();
em_x270_init_ac97();
}
MACHINE_START(EM_X270, "Compulab EM-x270")
MACHINE_START(EM_X270, "Compulab EM-X270")
.boot_params = 0xa0000100,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,

59
arch/arm/mach-pxa/pxa25x.c
View File

@ -109,6 +109,52 @@ static const struct clkops clk_pxa25x_lcd_ops = {
.getrate = clk_pxa25x_lcd_getrate,
};
static unsigned long gpio12_config_32k[] = {
GPIO12_32KHz,
};
static unsigned long gpio12_config_gpio[] = {
GPIO12_GPIO,
};
static void clk_gpio12_enable(struct clk *clk)
{
pxa2xx_mfp_config(gpio12_config_32k, 1);
}
static void clk_gpio12_disable(struct clk *clk)
{
pxa2xx_mfp_config(gpio12_config_gpio, 1);
}
static const struct clkops clk_pxa25x_gpio12_ops = {
.enable = clk_gpio12_enable,
.disable = clk_gpio12_disable,
};
static unsigned long gpio11_config_3m6[] = {
GPIO11_3_6MHz,
};
static unsigned long gpio11_config_gpio[] = {
GPIO11_GPIO,
};
static void clk_gpio11_enable(struct clk *clk)
{
pxa2xx_mfp_config(gpio11_config_3m6, 1);
}
static void clk_gpio11_disable(struct clk *clk)
{
pxa2xx_mfp_config(gpio11_config_gpio, 1);
}
static const struct clkops clk_pxa25x_gpio11_ops = {
.enable = clk_gpio11_enable,
.disable = clk_gpio11_disable,
};
/*
* 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
* 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
@ -128,6 +174,8 @@ static struct clk pxa25x_clks[] = {
INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
@ -145,7 +193,10 @@ static struct clk pxa25x_clks[] = {
INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
};
static struct clk gpio7_clk = INIT_CKOTHER("GPIO7_CK", &pxa25x_clks[4], NULL);
static struct clk pxa2xx_clk_aliases[] = {
INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
};
#ifdef CONFIG_PM
@ -293,7 +344,7 @@ static int __init pxa25x_init(void)
int i, ret = 0;
/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
if (cpu_is_pxa25x())
if (cpu_is_pxa255())
clks_register(&pxa25x_hwuart_clk, 1);
if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
@ -317,10 +368,10 @@ static int __init pxa25x_init(void)
}
/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
if (cpu_is_pxa25x())
if (cpu_is_pxa255())
ret = platform_device_register(&pxa_device_hwuart);
clks_register(&gpio7_clk, 1);
clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
return ret;
}

2
arch/arm/mach-sa1100/clock.c
View File

@ -103,7 +103,7 @@ static void clk_gpio27_disable(void)
}
static struct clk clk_gpio27 = {
.name = "GPIO27_CLK",
.name = "SA1111_CLK",
.rate = 3686400,
.enable = clk_gpio27_enable,
.disable = clk_gpio27_disable,

79
drivers/mtd/nand/cmx270_nand.c
View File

@ -20,9 +20,11 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/gpio.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/hardware.h>
#include <asm/arch/pxa-regs.h>
@ -30,20 +32,6 @@
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (89)
/* This macro needed to ensure in-order operation of GPIO and local
* bus. Without both asm command and dummy uncached read there're
* states when NAND access is broken. I've looked for such macro(s) in
* include/asm-arm but found nothing approptiate.
* dmac_clean_range is close, but is makes cache invalidation
* unnecessary here and it cannot be used in module
*/
#define DRAIN_WB() \
do { \
unsigned char dummy; \
asm volatile ("mcr p15, 0, r0, c7, c10, 4":::"r0"); \
dummy=*((unsigned char*)UNCACHED_ADDR); \
} while(0)
/* MTD structure for CM-X270 board */
static struct mtd_info *cmx270_nand_mtd;
@ -103,14 +91,14 @@ static int cmx270_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
static inline void nand_cs_on(void)
{
GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
gpio_set_value(GPIO_NAND_CS, 0);
}
static void nand_cs_off(void)
{
DRAIN_WB();
dsb();
GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
gpio_set_value(GPIO_NAND_CS, 1);
}
/*
@ -122,7 +110,7 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
struct nand_chip* this = mtd->priv;
unsigned int nandaddr = (unsigned int)this->IO_ADDR_W;
DRAIN_WB();
dsb();
if (ctrl & NAND_CTRL_CHANGE) {
if ( ctrl & NAND_ALE )
@ -139,12 +127,12 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
nand_cs_off();
}
DRAIN_WB();
dsb();
this->IO_ADDR_W = (void __iomem*)nandaddr;
if (dat != NAND_CMD_NONE)
writel((dat << 16), this->IO_ADDR_W);
DRAIN_WB();
dsb();
}
/*
@ -152,9 +140,9 @@ static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
*/
static int cmx270_device_ready(struct mtd_info *mtd)
{
DRAIN_WB();
dsb();
return (GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB));
return (gpio_get_value(GPIO_NAND_RB));
}
/*
@ -168,20 +156,40 @@ static int cmx270_init(void)
int mtd_parts_nb = 0;
int ret;
if (!machine_is_armcore())
return -ENODEV;
ret = gpio_request(GPIO_NAND_CS, "NAND CS");
if (ret) {
pr_warning("CM-X270: failed to request NAND CS gpio\n");
return ret;
}
gpio_direction_output(GPIO_NAND_CS, 1);
ret = gpio_request(GPIO_NAND_RB, "NAND R/B");
if (ret) {
pr_warning("CM-X270: failed to request NAND R/B gpio\n");
goto err_gpio_request;
}
gpio_direction_input(GPIO_NAND_RB);
/* Allocate memory for MTD device structure and private data */
cmx270_nand_mtd = kzalloc(sizeof(struct mtd_info) +
sizeof(struct nand_chip),
GFP_KERNEL);
if (!cmx270_nand_mtd) {
printk("Unable to allocate CM-X270 NAND MTD device structure.\n");
return -ENOMEM;
pr_debug("Unable to allocate CM-X270 NAND MTD device structure.\n");
ret = -ENOMEM;
goto err_kzalloc;
}
cmx270_nand_io = ioremap(PXA_CS1_PHYS, 12);
if (!cmx270_nand_io) {
printk("Unable to ioremap NAND device\n");
pr_debug("Unable to ioremap NAND device\n");
ret = -EINVAL;
goto err1;
goto err_ioremap;
}
/* Get pointer to private data */
@ -209,9 +217,9 @@ static int cmx270_init(void)
/* Scan to find existence of the device */
if (nand_scan (cmx270_nand_mtd, 1)) {
printk(KERN_NOTICE "No NAND device\n");
pr_notice("No NAND device\n");
ret = -ENXIO;
goto err2;
goto err_scan;
}
#ifdef CONFIG_MTD_CMDLINE_PARTS
@ -229,18 +237,22 @@ static int cmx270_init(void)
}
/* Register the partitions */
printk(KERN_NOTICE "Using %s partition definition\n", part_type);
pr_notice("Using %s partition definition\n", part_type);
ret = add_mtd_partitions(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
if (ret)
goto err2;
goto err_scan;
/* Return happy */
return 0;
err2:
err_scan:
iounmap(cmx270_nand_io);
err1:
err_ioremap:
kfree(cmx270_nand_mtd);
err_kzalloc:
gpio_free(GPIO_NAND_RB);
err_gpio_request:
gpio_free(GPIO_NAND_CS);
return ret;
@ -255,6 +267,9 @@ static void cmx270_cleanup(void)
/* Release resources, unregister device */
nand_release(cmx270_nand_mtd);
gpio_free(GPIO_NAND_RB);
gpio_free(GPIO_NAND_CS);
iounmap(cmx270_nand_io);
/* Free the MTD device structure */

89
drivers/pcmcia/pxa2xx_cm_x270.c
View File

@ -5,83 +5,60 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Compulab Ltd., 2003, 2007
* Compulab Ltd., 2003, 2007, 2008
* Mike Rapoport <mike@compulab.co.il>
*
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <pcmcia/ss.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-gpio.h>
#include <asm/arch/cm-x270.h>
#include "soc_common.h"
#define GPIO_PCMCIA_S0_CD_VALID (84)
#define GPIO_PCMCIA_S0_RDYINT (82)
#define GPIO_PCMCIA_RESET (53)
#define PCMCIA_S0_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
#define PCMCIA_S0_RDYINT IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
static struct pcmcia_irqs irqs[] = {
{ 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
{ 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
};
static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) |
GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) |
GPIO_bit(GPIO85_nPCE_1) |
GPIO_bit(GPIO54_nPCE_2);
int ret = gpio_request(GPIO_PCMCIA_RESET, "PCCard reset");
if (ret)
return ret;
gpio_direction_output(GPIO_PCMCIA_RESET, 0);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO85_nPCE_1_MD);
pxa_gpio_mode(GPIO54_nPCE_2_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
skt->irq = PCMCIA_S0_RDYINT;
ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
if (!ret)
gpio_free(GPIO_PCMCIA_RESET);
/* Reset signal */
pxa_gpio_mode(GPIO53_nPCE_2 | GPIO_OUT);
GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
set_irq_type(PCMCIA_S0_CD_VALID, IRQ_TYPE_EDGE_BOTH);
set_irq_type(PCMCIA_S1_CD_VALID, IRQ_TYPE_EDGE_BOTH);
/* irq's for slots: */
set_irq_type(PCMCIA_S0_RDYINT, IRQ_TYPE_EDGE_FALLING);
set_irq_type(PCMCIA_S1_RDYINT, IRQ_TYPE_EDGE_FALLING);
skt->irq = (skt->nr == 0) ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
return ret;
}
static void cmx270_pcmcia_shutdown(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_CD_VALID), IRQ_TYPE_NONE);
set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_CD_VALID), IRQ_TYPE_NONE);
set_irq_type(IRQ_TO_GPIO(PCMCIA_S0_RDYINT), IRQ_TYPE_NONE);
set_irq_type(IRQ_TO_GPIO(PCMCIA_S1_RDYINT), IRQ_TYPE_NONE);
gpio_free(GPIO_PCMCIA_RESET);
}
static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
struct pcmcia_state *state)
{
state->detect = (PCC_DETECT(skt->nr) == 0) ? 1 : 0;
state->ready = (PCC_READY(skt->nr) == 0) ? 0 : 1;
state->detect = (gpio_get_value(GPIO_PCMCIA_S0_CD_VALID) == 0) ? 1 : 0;
state->ready = (gpio_get_value(GPIO_PCMCIA_S0_RDYINT) == 0) ? 0 : 1;
state->bvd1 = 1;
state->bvd2 = 1;
state->vs_3v = 0;
@ -93,32 +70,16 @@ static void cmx270_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
static int cmx270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
pxa_gpio_mode(GPIO49_nPWE | GPIO_OUT);
switch (skt->nr) {
case 0:
if (state->flags & SS_RESET) {
GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
gpio_set_value(GPIO_PCMCIA_RESET, 1);
udelay(10);
GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
}
break;
case 1:
if (state->flags & SS_RESET) {
GPCR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
GPSR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
udelay(10);
GPCR(GPIO53_nPCE_2) = GPIO_bit(GPIO53_nPCE_2);
GPSR(GPIO49_nPWE) = GPIO_bit(GPIO49_nPWE);
gpio_set_value(GPIO_PCMCIA_RESET, 0);
}
break;
}
pxa_gpio_mode(GPIO49_nPWE_MD);
return 0;
}
@ -139,7 +100,7 @@ static struct pcmcia_low_level cmx270_pcmcia_ops __initdata = {
.configure_socket = cmx270_pcmcia_configure_socket,
.socket_init = cmx270_pcmcia_socket_init,
.socket_suspend = cmx270_pcmcia_socket_suspend,
.nr = 2,
.nr = 1,
};
static struct platform_device *cmx270_pcmcia_device;

50
include/asm-arm/arch-pxa/cm-x270.h
View File

@ -1,50 +0,0 @@
/*
* linux/include/asm/arch-pxa/cm-x270.h
*
* Copyright Compulab Ltd., 2003, 2007
* Mike Rapoport <mike@compulab.co.il>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* CM-x270 device physical addresses */
#define CMX270_CS1_PHYS (PXA_CS1_PHYS)
#define MARATHON_PHYS (PXA_CS2_PHYS)
#define CMX270_IDE104_PHYS (PXA_CS3_PHYS)
#define CMX270_IT8152_PHYS (PXA_CS4_PHYS)
/* Statically mapped regions */
#define CMX270_VIRT_BASE (0xe8000000)
#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE)
#define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + SZ_64M)
/* GPIO related definitions */
#define GPIO_IT8152_IRQ (22)
#define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ)
#define PME_IRQ IRQ_GPIO(0)
#define CMX270_IDE_IRQ IRQ_GPIO(100)
#define CMX270_GPIRQ1 IRQ_GPIO(101)
#define CMX270_TOUCHIRQ IRQ_GPIO(96)
#define CMX270_ETHIRQ IRQ_GPIO(10)
#define CMX270_GFXIRQ IRQ_GPIO(95)
#define CMX270_NANDIRQ IRQ_GPIO(89)
#define CMX270_MMC_IRQ IRQ_GPIO(83)
/* PCMCIA related definitions */
#define PCC_DETECT(x) (GPLR(84 - (x)) & GPIO_bit(84 - (x)))
#define PCC_READY(x) (GPLR(82 - (x)) & GPIO_bit(82 - (x)))
#define PCMCIA_S0_CD_VALID IRQ_GPIO(84)
#define PCMCIA_S0_CD_VALID_EDGE GPIO_BOTH_EDGES
#define PCMCIA_S1_CD_VALID IRQ_GPIO(83)
#define PCMCIA_S1_CD_VALID_EDGE GPIO_BOTH_EDGES
#define PCMCIA_S0_RDYINT IRQ_GPIO(82)
#define PCMCIA_S1_RDYINT IRQ_GPIO(81)
#define PCMCIA_RESET_GPIO 53

12
include/asm-arm/arch-pxa/hardware.h
View File

@ -69,6 +69,12 @@
_id == 0x212; \
})
#define __cpu_is_pxa255(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
_id == 0x2d0; \
})
#define __cpu_is_pxa25x(id) \
({ \
unsigned int _id = (id) >> 4 & 0xfff; \
@ -76,6 +82,7 @@
})
#else
#define __cpu_is_pxa21x(id) (0)
#define __cpu_is_pxa255(id) (0)
#define __cpu_is_pxa25x(id) (0)
#endif
@ -124,6 +131,11 @@
__cpu_is_pxa21x(read_cpuid_id()); \
})
#define cpu_is_pxa255() \
({ \
__cpu_is_pxa255(read_cpuid_id()); \
})
#define cpu_is_pxa25x() \
({ \
__cpu_is_pxa25x(read_cpuid_id()); \