forked from luck/tmp_suning_uos_patched
usb: pch_udc: Fixed issue which does not work with g_serial
This PCH_UDC driver does not work normally when "Serial gadget" is used. The receiving data of control transmission (EP0 Control OUT Transaction) has not received correctly. This patch fixed this issue. The following was modified. - The buffer size. - The change processing of a receiving buffer (The temporary buffer and the buffer prepared by gadget). - The setup processing of a DMA descriptor. Currently the PCH_UDC driver can work normally with "Serial gadget" or "File-backed Storage Gadget". Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
parent
956227120f
commit
abab0c67c0
@ -198,10 +198,10 @@
|
||||
#define PCH_UDC_BRLEN 0x0F /* Burst length */
|
||||
#define PCH_UDC_THLEN 0x1F /* Threshold length */
|
||||
/* Value of EP Buffer Size */
|
||||
#define UDC_EP0IN_BUFF_SIZE 64
|
||||
#define UDC_EPIN_BUFF_SIZE 512
|
||||
#define UDC_EP0OUT_BUFF_SIZE 64
|
||||
#define UDC_EPOUT_BUFF_SIZE 512
|
||||
#define UDC_EP0IN_BUFF_SIZE 16
|
||||
#define UDC_EPIN_BUFF_SIZE 256
|
||||
#define UDC_EP0OUT_BUFF_SIZE 16
|
||||
#define UDC_EPOUT_BUFF_SIZE 256
|
||||
/* Value of EP maximum packet size */
|
||||
#define UDC_EP0IN_MAX_PKT_SIZE 64
|
||||
#define UDC_EP0OUT_MAX_PKT_SIZE 64
|
||||
@ -351,7 +351,7 @@ struct pch_udc_dev {
|
||||
struct pci_pool *data_requests;
|
||||
struct pci_pool *stp_requests;
|
||||
dma_addr_t dma_addr;
|
||||
unsigned long ep0out_buf[64];
|
||||
void *ep0out_buf;
|
||||
struct usb_ctrlrequest setup_data;
|
||||
unsigned long phys_addr;
|
||||
void __iomem *base_addr;
|
||||
@ -1219,11 +1219,11 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
|
||||
dev = ep->dev;
|
||||
if (req->dma_mapped) {
|
||||
if (ep->in)
|
||||
pci_unmap_single(dev->pdev, req->req.dma,
|
||||
req->req.length, PCI_DMA_TODEVICE);
|
||||
dma_unmap_single(&dev->pdev->dev, req->req.dma,
|
||||
req->req.length, DMA_TO_DEVICE);
|
||||
else
|
||||
pci_unmap_single(dev->pdev, req->req.dma,
|
||||
req->req.length, PCI_DMA_FROMDEVICE);
|
||||
dma_unmap_single(&dev->pdev->dev, req->req.dma,
|
||||
req->req.length, DMA_FROM_DEVICE);
|
||||
req->dma_mapped = 0;
|
||||
req->req.dma = DMA_ADDR_INVALID;
|
||||
}
|
||||
@ -1414,7 +1414,6 @@ static void pch_udc_start_rxrequest(struct pch_udc_ep *ep,
|
||||
|
||||
pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
|
||||
td_data = req->td_data;
|
||||
ep->td_data = req->td_data;
|
||||
/* Set the status bits for all descriptors */
|
||||
while (1) {
|
||||
td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
|
||||
@ -1613,15 +1612,19 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
|
||||
if (usbreq->length &&
|
||||
((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
|
||||
if (ep->in)
|
||||
usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
|
||||
usbreq->length, PCI_DMA_TODEVICE);
|
||||
usbreq->dma = dma_map_single(&dev->pdev->dev,
|
||||
usbreq->buf,
|
||||
usbreq->length,
|
||||
DMA_TO_DEVICE);
|
||||
else
|
||||
usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
|
||||
usbreq->length, PCI_DMA_FROMDEVICE);
|
||||
usbreq->dma = dma_map_single(&dev->pdev->dev,
|
||||
usbreq->buf,
|
||||
usbreq->length,
|
||||
DMA_FROM_DEVICE);
|
||||
req->dma_mapped = 1;
|
||||
}
|
||||
if (usbreq->length > 0) {
|
||||
retval = prepare_dma(ep, req, gfp);
|
||||
retval = prepare_dma(ep, req, GFP_ATOMIC);
|
||||
if (retval)
|
||||
goto probe_end;
|
||||
}
|
||||
@ -1646,7 +1649,6 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
|
||||
pch_udc_wait_ep_stall(ep);
|
||||
pch_udc_ep_clear_nak(ep);
|
||||
pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num));
|
||||
pch_udc_set_dma(dev, DMA_DIR_TX);
|
||||
}
|
||||
}
|
||||
/* Now add this request to the ep's pending requests */
|
||||
@ -1926,6 +1928,7 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
|
||||
PCH_UDC_BS_DMA_DONE)
|
||||
return;
|
||||
pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
|
||||
pch_udc_ep_set_ddptr(ep, 0);
|
||||
if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
|
||||
PCH_UDC_RTS_SUCC) {
|
||||
dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
|
||||
@ -1963,7 +1966,7 @@ static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num)
|
||||
u32 epsts;
|
||||
struct pch_udc_ep *ep;
|
||||
|
||||
ep = &dev->ep[2*ep_num];
|
||||
ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
|
||||
epsts = ep->epsts;
|
||||
ep->epsts = 0;
|
||||
|
||||
@ -2008,7 +2011,7 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
|
||||
struct pch_udc_ep *ep;
|
||||
struct pch_udc_request *req = NULL;
|
||||
|
||||
ep = &dev->ep[2*ep_num + 1];
|
||||
ep = &dev->ep[UDC_EPOUT_IDX(ep_num)];
|
||||
epsts = ep->epsts;
|
||||
ep->epsts = 0;
|
||||
|
||||
@ -2025,10 +2028,11 @@ static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
|
||||
}
|
||||
if (epsts & UDC_EPSTS_HE)
|
||||
return;
|
||||
if (epsts & UDC_EPSTS_RSS)
|
||||
if (epsts & UDC_EPSTS_RSS) {
|
||||
pch_udc_ep_set_stall(ep);
|
||||
pch_udc_enable_ep_interrupts(ep->dev,
|
||||
PCH_UDC_EPINT(ep->in, ep->num));
|
||||
}
|
||||
if (epsts & UDC_EPSTS_RCS) {
|
||||
if (!dev->prot_stall) {
|
||||
pch_udc_ep_clear_stall(ep);
|
||||
@ -2060,8 +2064,10 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
|
||||
{
|
||||
u32 epsts;
|
||||
struct pch_udc_ep *ep;
|
||||
struct pch_udc_ep *ep_out;
|
||||
|
||||
ep = &dev->ep[UDC_EP0IN_IDX];
|
||||
ep_out = &dev->ep[UDC_EP0OUT_IDX];
|
||||
epsts = ep->epsts;
|
||||
ep->epsts = 0;
|
||||
|
||||
@ -2073,8 +2079,16 @@ static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
|
||||
return;
|
||||
if (epsts & UDC_EPSTS_HE)
|
||||
return;
|
||||
if ((epsts & UDC_EPSTS_TDC) && (!dev->stall))
|
||||
if ((epsts & UDC_EPSTS_TDC) && (!dev->stall)) {
|
||||
pch_udc_complete_transfer(ep);
|
||||
pch_udc_clear_dma(dev, DMA_DIR_RX);
|
||||
ep_out->td_data->status = (ep_out->td_data->status &
|
||||
~PCH_UDC_BUFF_STS) |
|
||||
PCH_UDC_BS_HST_RDY;
|
||||
pch_udc_ep_clear_nak(ep_out);
|
||||
pch_udc_set_dma(dev, DMA_DIR_RX);
|
||||
pch_udc_ep_set_rrdy(ep_out);
|
||||
}
|
||||
/* On IN interrupt, provide data if we have any */
|
||||
if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) &&
|
||||
!(epsts & UDC_EPSTS_TXEMPTY))
|
||||
@ -2102,11 +2116,9 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
|
||||
dev->stall = 0;
|
||||
dev->ep[UDC_EP0IN_IDX].halted = 0;
|
||||
dev->ep[UDC_EP0OUT_IDX].halted = 0;
|
||||
/* In data not ready */
|
||||
pch_udc_ep_set_nak(&(dev->ep[UDC_EP0IN_IDX]));
|
||||
dev->setup_data = ep->td_stp->request;
|
||||
pch_udc_init_setup_buff(ep->td_stp);
|
||||
pch_udc_clear_dma(dev, DMA_DIR_TX);
|
||||
pch_udc_clear_dma(dev, DMA_DIR_RX);
|
||||
pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]),
|
||||
dev->ep[UDC_EP0IN_IDX].in);
|
||||
if ((dev->setup_data.bRequestType & USB_DIR_IN))
|
||||
@ -2122,14 +2134,23 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
|
||||
setup_supported = dev->driver->setup(&dev->gadget,
|
||||
&dev->setup_data);
|
||||
spin_lock(&dev->lock);
|
||||
|
||||
if (dev->setup_data.bRequestType & USB_DIR_IN) {
|
||||
ep->td_data->status = (ep->td_data->status &
|
||||
~PCH_UDC_BUFF_STS) |
|
||||
PCH_UDC_BS_HST_RDY;
|
||||
pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
|
||||
}
|
||||
/* ep0 in returns data on IN phase */
|
||||
if (setup_supported >= 0 && setup_supported <
|
||||
UDC_EP0IN_MAX_PKT_SIZE) {
|
||||
pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
|
||||
/* Gadget would have queued a request when
|
||||
* we called the setup */
|
||||
pch_udc_set_dma(dev, DMA_DIR_RX);
|
||||
pch_udc_ep_clear_nak(ep);
|
||||
if (!(dev->setup_data.bRequestType & USB_DIR_IN)) {
|
||||
pch_udc_set_dma(dev, DMA_DIR_RX);
|
||||
pch_udc_ep_clear_nak(ep);
|
||||
}
|
||||
} else if (setup_supported < 0) {
|
||||
/* if unsupported request, then stall */
|
||||
pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX]));
|
||||
@ -2142,22 +2163,13 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
|
||||
}
|
||||
} else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
|
||||
UDC_EPSTS_OUT_DATA) && !dev->stall) {
|
||||
if (list_empty(&ep->queue)) {
|
||||
dev_err(&dev->pdev->dev, "%s: No request\n", __func__);
|
||||
ep->td_data->status = (ep->td_data->status &
|
||||
~PCH_UDC_BUFF_STS) |
|
||||
PCH_UDC_BS_HST_RDY;
|
||||
pch_udc_set_dma(dev, DMA_DIR_RX);
|
||||
} else {
|
||||
/* control write */
|
||||
/* next function will pickuo an clear the status */
|
||||
pch_udc_clear_dma(dev, DMA_DIR_RX);
|
||||
pch_udc_ep_set_ddptr(ep, 0);
|
||||
if (!list_empty(&ep->queue)) {
|
||||
ep->epsts = stat;
|
||||
|
||||
pch_udc_svc_data_out(dev, 0);
|
||||
/* re-program desc. pointer for possible ZLPs */
|
||||
pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
|
||||
pch_udc_set_dma(dev, DMA_DIR_RX);
|
||||
pch_udc_svc_data_out(dev, PCH_UDC_EP0);
|
||||
}
|
||||
pch_udc_set_dma(dev, DMA_DIR_RX);
|
||||
}
|
||||
pch_udc_ep_set_rrdy(ep);
|
||||
}
|
||||
@ -2174,7 +2186,7 @@ static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
|
||||
struct pch_udc_ep *ep;
|
||||
struct pch_udc_request *req;
|
||||
|
||||
ep = &dev->ep[2*ep_num];
|
||||
ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
|
||||
if (!list_empty(&ep->queue)) {
|
||||
req = list_entry(ep->queue.next, struct pch_udc_request, queue);
|
||||
pch_udc_enable_ep_interrupts(ep->dev,
|
||||
@ -2196,13 +2208,13 @@ static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr)
|
||||
for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) {
|
||||
/* IN */
|
||||
if (ep_intr & (0x1 << i)) {
|
||||
ep = &dev->ep[2*i];
|
||||
ep = &dev->ep[UDC_EPIN_IDX(i)];
|
||||
ep->epsts = pch_udc_read_ep_status(ep);
|
||||
pch_udc_clear_ep_status(ep, ep->epsts);
|
||||
}
|
||||
/* OUT */
|
||||
if (ep_intr & (0x10000 << i)) {
|
||||
ep = &dev->ep[2*i+1];
|
||||
ep = &dev->ep[UDC_EPOUT_IDX(i)];
|
||||
ep->epsts = pch_udc_read_ep_status(ep);
|
||||
pch_udc_clear_ep_status(ep, ep->epsts);
|
||||
}
|
||||
@ -2563,9 +2575,6 @@ static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
|
||||
dev->ep[UDC_EP0IN_IDX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE;
|
||||
dev->ep[UDC_EP0OUT_IDX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE;
|
||||
|
||||
dev->dma_addr = pci_map_single(dev->pdev, dev->ep0out_buf, 256,
|
||||
PCI_DMA_FROMDEVICE);
|
||||
|
||||
/* remove ep0 in and out from the list. They have own pointer */
|
||||
list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list);
|
||||
list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list);
|
||||
@ -2637,6 +2646,13 @@ static int init_dma_pools(struct pch_udc_dev *dev)
|
||||
dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0;
|
||||
dev->ep[UDC_EP0IN_IDX].td_data = NULL;
|
||||
dev->ep[UDC_EP0IN_IDX].td_data_phys = 0;
|
||||
|
||||
dev->ep0out_buf = kzalloc(UDC_EP0OUT_BUFF_SIZE * 4, GFP_KERNEL);
|
||||
if (!dev->ep0out_buf)
|
||||
return -ENOMEM;
|
||||
dev->dma_addr = dma_map_single(&dev->pdev->dev, dev->ep0out_buf,
|
||||
UDC_EP0OUT_BUFF_SIZE * 4,
|
||||
DMA_FROM_DEVICE);
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -2750,6 +2766,11 @@ static void pch_udc_remove(struct pci_dev *pdev)
|
||||
pci_pool_destroy(dev->stp_requests);
|
||||
}
|
||||
|
||||
if (dev->dma_addr)
|
||||
dma_unmap_single(&dev->pdev->dev, dev->dma_addr,
|
||||
UDC_EP0OUT_BUFF_SIZE * 4, DMA_FROM_DEVICE);
|
||||
kfree(dev->ep0out_buf);
|
||||
|
||||
pch_udc_exit(dev);
|
||||
|
||||
if (dev->irq_registered)
|
||||
@ -2792,11 +2813,7 @@ static int pch_udc_resume(struct pci_dev *pdev)
|
||||
int ret;
|
||||
|
||||
pci_set_power_state(pdev, PCI_D0);
|
||||
ret = pci_restore_state(pdev);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "%s: pci_restore_state failed\n", __func__);
|
||||
return ret;
|
||||
}
|
||||
pci_restore_state(pdev);
|
||||
ret = pci_enable_device(pdev);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "%s: pci_enable_device failed\n", __func__);
|
||||
|
Loading…
Reference in New Issue
Block a user