metag: Headers for core arch constants

Add a couple of header files containing core architecture constants.

The first (<asm/metag_isa.h>) contains some constants relating to the
instruction set, such as values to give to the CACHEW and CACHER
instructions.

The second (<asm/metag_regs.h>) contains constants for the core register
units directly accessible to various instructions, and for the
registers, fields, and bits in those units. The main units described are
the control unit (CT.*), the trigger unit (TR.*), and the run-time trace
unit (TT.*).

Signed-off-by: James Hogan <james.hogan@imgtec.com>

arch/metag/include/asm/metag_isa.h

@@ -0,0 +1,81 @@
+/*
+ * asm/metag_isa.h
+ *
+ * Copyright (C) 2000-2007, 2012 Imagination Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ *
+ * Various defines for Meta instruction set.
+ */
+
+#ifndef _ASM_METAG_ISA_H_
+#define _ASM_METAG_ISA_H_
+
+
+/* L1 cache layout */
+
+/* Data cache line size as bytes and shift */
+#define DCACHE_LINE_BYTES 64
+#define DCACHE_LINE_S     6
+
+/* Number of ways in the data cache */
+#define DCACHE_WAYS       4
+
+/* Instruction cache line size as bytes and shift */
+#define ICACHE_LINE_BYTES 64
+#define ICACHE_LINE_S     6
+
+/* Number of ways in the instruction cache */
+#define ICACHE_WAYS       4
+
+
+/*
+ * CACHEWD/CACHEWL instructions use the bottom 8 bits of the data presented to
+ * control the operation actually achieved.
+ */
+/* Use of these two bits should be discouraged since the bits dont have
+ * consistent meanings
+ */
+#define CACHEW_ICACHE_BIT           0x01
+#define CACHEW_TLBFLUSH_BIT         0x02
+
+#define CACHEW_FLUSH_L1D_L2         0x0
+#define CACHEW_INVALIDATE_L1I       0x1
+#define CACHEW_INVALIDATE_L1DTLB    0x2
+#define CACHEW_INVALIDATE_L1ITLB    0x3
+#define CACHEW_WRITEBACK_L1D_L2     0x4
+#define CACHEW_INVALIDATE_L1D       0x8
+#define CACHEW_INVALIDATE_L1D_L2    0xC
+
+/*
+ * CACHERD/CACHERL instructions use bits 3:5 of the address presented to
+ * control the operation achieved and hence the specific result.
+ */
+#define CACHER_ADDR_BITS            0xFFFFFFC0
+#define CACHER_OPER_BITS            0x00000030
+#define CACHER_OPER_S               4
+#define     CACHER_OPER_LINPHY          0
+#define CACHER_ICACHE_BIT           0x00000008
+#define CACHER_ICACHE_S             3
+
+/*
+ * CACHERD/CACHERL LINPHY Oper result is one/two 32-bit words
+ *
+ *  If CRLINPHY0_VAL_BIT (Bit 0) set then,
+ *      Lower 32-bits corresponds to MMCU_ENTRY_* above.
+ *      Upper 32-bits corresponds to CRLINPHY1_* values below (if requested).
+ *  else
+ *      Lower 32-bits corresponds to CRLINPHY0_* values below.
+ *      Upper 32-bits undefined.
+ */
+#define CRLINPHY0_VAL_BIT      0x00000001
+#define CRLINPHY0_FIRST_BIT    0x00000004 /* Set if VAL=0 due to first level */
+
+#define CRLINPHY1_READ_BIT     0x00000001 /* Set if reads permitted          */
+#define CRLINPHY1_SINGLE_BIT   0x00000004 /* Set if TLB does not cache entry */
+#define CRLINPHY1_PAGEMSK_BITS 0x0000FFF0 /* Set to ((2^n-1)>>12) value      */
+#define CRLINPHY1_PAGEMSK_S    4
+
+#endif /* _ASM_METAG_ISA_H_ */