AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

b43: Allow PIO mode to be selected at module load

Browse Source 
If userencounter the "Fatal DMA Problem" with a BCM43XX device, and
still wish to use b43 as the driver, their only option is to rebuild
the kernel with CONFIG_B43_FORCE_PIO. This patch removes this option and
allows PIO mode to be selected with a load-time parameter for the module.
Note that the configuration variable CONFIG_B43_PIO is also removed.

Once the DMA problem with the BCM4312 devices is solved, this patch will
likely be reverted.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: John Daiker <daikerjohn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Larry Finger 2009-12-10 17:35:01 -06:00 committed by John W. Linville
parent 7dc6a7a763
commit b02914af4d
6 changed files with 8 additions and 75 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
drivers/net/wireless/b43/Kconfig
View File

@ -3,6 +3,7 @@ config B43
depends on SSB_POSSIBLE && MAC80211 && HAS_DMA
select SSB
select FW_LOADER
select SSB_BLOCKIO
---help---
b43 is a driver for the Broadcom 43xx series wireless devices.
@ -78,14 +79,6 @@ config B43_SDIO
If unsure, say N.
# Data transfers to the device via PIO
# This is only needed on PCMCIA and SDIO devices. All others can do DMA properly.
config B43_PIO
bool
depends on B43 && (B43_SDIO || B43_PCMCIA || B43_FORCE_PIO)
select SSB_BLOCKIO
default y
config B43_NPHY
bool "Pre IEEE 802.11n support (BROKEN)"
depends on B43 && EXPERIMENTAL && BROKEN
@ -137,12 +130,4 @@ config B43_DEBUG
for production use.
Only say Y, if you are debugging a problem in the b43 driver sourcecode.
config B43_FORCE_PIO
bool "Force usage of PIO instead of DMA"
depends on B43 && B43_DEBUG
---help---
This will disable DMA and always enable PIO instead.
Say N!
This is only for debugging the PIO engine code. You do
_NOT_ want to enable this.

2
drivers/net/wireless/b43/Makefile
View File

@ -12,7 +12,7 @@ b43-y += xmit.o
b43-y += lo.o
b43-y += wa.o
b43-y += dma.o
b43-$(CONFIG_B43_PIO) += pio.o
b43-y += pio.o
b43-y += rfkill.o
b43-$(CONFIG_B43_LEDS) += leds.o
b43-$(CONFIG_B43_PCMCIA) += pcmcia.o

13
drivers/net/wireless/b43/b43.h
View File

@ -821,11 +821,9 @@ struct b43_wl {
/* The device LEDs. */
struct b43_leds leds;
#ifdef CONFIG_B43_PIO
/* Kmalloc'ed scratch space for PIO TX/RX. Protected by wl->mutex. */
u8 pio_scratchspace[110] __attribute__((__aligned__(8)));
u8 pio_tailspace[4] __attribute__((__aligned__(8)));
#endif /* CONFIG_B43_PIO */
};
static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
@ -876,20 +874,9 @@ static inline void b43_write32(struct b43_wldev *dev, u16 offset, u32 value)
static inline bool b43_using_pio_transfers(struct b43_wldev *dev)
{
#ifdef CONFIG_B43_PIO
return dev->__using_pio_transfers;
#else
return 0;
#endif
}
#ifdef CONFIG_B43_FORCE_PIO
# define B43_FORCE_PIO 1
#else
# define B43_FORCE_PIO 0
#endif
/* Message printing */
void b43info(struct b43_wl *wl, const char *fmt, ...)
__attribute__ ((format(printf, 2, 3)));

2
drivers/net/wireless/b43/dma.c
View File

@ -1760,7 +1760,6 @@ void b43_dma_tx_resume(struct b43_wldev *dev)
b43_power_saving_ctl_bits(dev, 0);
}
#ifdef CONFIG_B43_PIO
static void direct_fifo_rx(struct b43_wldev *dev, enum b43_dmatype type,
u16 mmio_base, bool enable)
{
@ -1794,4 +1793,3 @@ void b43_dma_direct_fifo_rx(struct b43_wldev *dev,
mmio_base = b43_dmacontroller_base(type, engine_index);
direct_fifo_rx(dev, type, mmio_base, enable);
}
#endif /* CONFIG_B43_PIO */

9
drivers/net/wireless/b43/main.c
View File

@ -102,6 +102,9 @@ int b43_modparam_verbose = B43_VERBOSITY_DEFAULT;
module_param_named(verbose, b43_modparam_verbose, int, 0644);
MODULE_PARM_DESC(verbose, "Log message verbosity: 0=error, 1=warn, 2=info(default), 3=debug");
static int modparam_pio;
module_param_named(pio, modparam_pio, int, 0444);
MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");
static const struct ssb_device_id b43_ssb_tbl[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 5),
@ -1786,8 +1789,8 @@ static void b43_do_interrupt_thread(struct b43_wldev *dev)
dma_reason[4], dma_reason[5]);
b43err(dev->wl, "This device does not support DMA "
"on your system. Please use PIO instead.\n");
b43err(dev->wl, "CONFIG_B43_FORCE_PIO must be set in "
"your kernel configuration.\n");
b43err(dev->wl, "Unload the b43 module and reload "
"with 'pio=1'\n");
return;
}
if (merged_dma_reason & B43_DMAIRQ_NONFATALMASK) {
@ -4353,7 +4356,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
(dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
B43_FORCE_PIO) {
modparam_pio) {
dev->__using_pio_transfers = 1;
err = b43_pio_init(dev);
} else {

40
drivers/net/wireless/b43/pio.h
View File

@ -55,8 +55,6 @@
#define B43_PIO_MAX_NR_TXPACKETS 32
#ifdef CONFIG_B43_PIO
struct b43_pio_txpacket {
/* Pointer to the TX queue we belong to. */
struct b43_pio_txqueue *queue;
@ -169,42 +167,4 @@ void b43_pio_rx(struct b43_pio_rxqueue *q);
void b43_pio_tx_suspend(struct b43_wldev *dev);
void b43_pio_tx_resume(struct b43_wldev *dev);
#else /* CONFIG_B43_PIO */
static inline int b43_pio_init(struct b43_wldev *dev)
{
return 0;
}
static inline void b43_pio_free(struct b43_wldev *dev)
{
}
static inline void b43_pio_stop(struct b43_wldev *dev)
{
}
static inline int b43_pio_tx(struct b43_wldev *dev,
struct sk_buff *skb)
{
return 0;
}
static inline void b43_pio_handle_txstatus(struct b43_wldev *dev,
const struct b43_txstatus *status)
{
}
static inline void b43_pio_get_tx_stats(struct b43_wldev *dev,
struct ieee80211_tx_queue_stats *stats)
{
}
static inline void b43_pio_rx(struct b43_pio_rxqueue *q)
{
}
static inline void b43_pio_tx_suspend(struct b43_wldev *dev)
{
}
static inline void b43_pio_tx_resume(struct b43_wldev *dev)
{
}
#endif /* CONFIG_B43_PIO */
#endif /* B43_PIO_H_ */