forked from luck/tmp_suning_uos_patched
hpt366: switch to using pci_get_slot
Switch to using pci_get_slot() to get to the function 1 of HPT36x/374 chips -- there's no need for the driver itself to walk the list of the PCI devices, and it also forgets to check the bus number of the device found. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
parent
90778574c9
commit
b4586715d7
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* linux/drivers/ide/pci/hpt366.c Version 0.44 May 20, 2006
|
||||
* linux/drivers/ide/pci/hpt366.c Version 0.45 May 27, 2006
|
||||
*
|
||||
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
|
||||
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
|
||||
|
@ -79,6 +79,7 @@
|
|||
* - prefix the driver startup messages with the real chip name
|
||||
* - claim the extra 240 bytes of I/O space for all chips
|
||||
* - optimize the rate masking/filtering and the drive list lookup code
|
||||
* - use pci_get_slot() to get to the function 1 of HPT36x/374
|
||||
* <source@mvista.com>
|
||||
*
|
||||
*/
|
||||
|
@ -1416,24 +1417,24 @@ static void __devinit init_iops_hpt366(ide_hwif_t *hwif)
|
|||
|
||||
static int __devinit init_setup_hpt374(struct pci_dev *dev, ide_pci_device_t *d)
|
||||
{
|
||||
struct pci_dev *findev = NULL;
|
||||
struct pci_dev *dev2;
|
||||
|
||||
if (PCI_FUNC(dev->devfn) & 1)
|
||||
return -ENODEV;
|
||||
|
||||
while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
|
||||
if ((findev->vendor == dev->vendor) &&
|
||||
(findev->device == dev->device) &&
|
||||
((findev->devfn - dev->devfn) == 1) &&
|
||||
(PCI_FUNC(findev->devfn) & 1)) {
|
||||
if (findev->irq != dev->irq) {
|
||||
/* FIXME: we need a core pci_set_interrupt() */
|
||||
findev->irq = dev->irq;
|
||||
printk(KERN_WARNING "%s: pci-config space interrupt "
|
||||
"fixed.\n", d->name);
|
||||
}
|
||||
return ide_setup_pci_devices(dev, findev, d);
|
||||
if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) {
|
||||
int ret;
|
||||
|
||||
if (dev2->irq != dev->irq) {
|
||||
/* FIXME: we need a core pci_set_interrupt() */
|
||||
dev2->irq = dev->irq;
|
||||
printk(KERN_WARNING "%s: PCI config space interrupt "
|
||||
"fixed.\n", d->name);
|
||||
}
|
||||
ret = ide_setup_pci_devices(dev, dev2, d);
|
||||
if (ret < 0)
|
||||
pci_dev_put(dev2);
|
||||
return ret;
|
||||
}
|
||||
return ide_setup_pci_device(dev, d);
|
||||
}
|
||||
|
@ -1491,8 +1492,8 @@ static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d)
|
|||
|
||||
static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
|
||||
{
|
||||
struct pci_dev *findev = NULL;
|
||||
u8 rev = 0, pin1 = 0, pin2 = 0;
|
||||
struct pci_dev *dev2;
|
||||
u8 rev = 0;
|
||||
static char *chipset_names[] = { "HPT366", "HPT366", "HPT368",
|
||||
"HPT370", "HPT370A", "HPT372",
|
||||
"HPT372N" };
|
||||
|
@ -1512,21 +1513,21 @@ static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
|
|||
|
||||
d->channels = 1;
|
||||
|
||||
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
|
||||
while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
|
||||
if ((findev->vendor == dev->vendor) &&
|
||||
(findev->device == dev->device) &&
|
||||
((findev->devfn - dev->devfn) == 1) &&
|
||||
(PCI_FUNC(findev->devfn) & 1)) {
|
||||
pci_read_config_byte(findev, PCI_INTERRUPT_PIN, &pin2);
|
||||
if ((pin1 != pin2) && (dev->irq == findev->irq)) {
|
||||
d->bootable = ON_BOARD;
|
||||
printk("%s: onboard version of chipset, "
|
||||
"pin1=%d pin2=%d\n", d->name,
|
||||
pin1, pin2);
|
||||
}
|
||||
return ide_setup_pci_devices(dev, findev, d);
|
||||
if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) {
|
||||
u8 pin1 = 0, pin2 = 0;
|
||||
int ret;
|
||||
|
||||
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
|
||||
pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
|
||||
if (pin1 != pin2 && dev->irq == dev2->irq) {
|
||||
d->bootable = ON_BOARD;
|
||||
printk("%s: onboard version of chipset, pin1=%d pin2=%d\n",
|
||||
d->name, pin1, pin2);
|
||||
}
|
||||
ret = ide_setup_pci_devices(dev, dev2, d);
|
||||
if (ret < 0)
|
||||
pci_dev_put(dev2);
|
||||
return ret;
|
||||
}
|
||||
init_single:
|
||||
return ide_setup_pci_device(dev, d);
|
||||
|
|
Loading…
Reference in New Issue
Block a user