AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

x86: 32 bits: shrink and align IRQ stubs

Browse Source 
Shrink the IRQ stubs on 32 bits down to just over four bytes per (we
fit seven into a 32-byte chunk.)  This shrinks the total icache
consumption of the IRQ stubs down to an even kilobyte, if all of them
are in active use.

The downside is that we end up with a double jump, which could have a
negative effect on some pipelines.  The double jump is always inside
the same cacheline on any modern chips (the exception being
486/Elan/Geode which have only 16-byte cachelines, but are unlikely to
have too many interrupt sources.)

To get the most effect, cache-align the IRQ stubs.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
This commit is contained in:
H. Peter Anvin 2008-11-11 13:24:58 -08:00
parent 4687518c4c
commit b7c6244f13
1 changed files with 22 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
arch/x86/kernel/entry_32.S
View File

@ -619,28 +619,37 @@ END(syscall_badsys)
27:;
/*
* Build the entry stubs and pointer table with
* some assembler magic.
* Build the entry stubs and pointer table with some assembler magic.
* We pack 7 stubs into a single 32-byte chunk, which will fit in a
* single cache line on all modern x86 implementations.
*/
.section .init.rodata,"a"
ENTRY(interrupt)
.text
.p2align 5
.p2align CONFIG_X86_L1_CACHE_SHIFT
ENTRY(irq_entries_start)
RING0_INT_FRAME
vector=FIRST_EXTERNAL_VECTOR
.rept NR_VECTORS
ALIGN
.if vector != FIRST_EXTERNAL_VECTOR
.rept (NR_VECTORS-FIRST_EXTERNAL_VECTOR+6)/7
.balign 32
.rept 7
.if vector < NR_VECTORS
.if vector != FIRST_EXTERNAL_VECTOR
CFI_ADJUST_CFA_OFFSET -4
.endif
1: pushl $~(vector)
.endif
1: pushl $(~vector+0x80) /* Note: always in signed byte range */
CFI_ADJUST_CFA_OFFSET 4
jmp common_interrupt
.previous
.if ((vector-FIRST_EXTERNAL_VECTOR)%7) != 6
jmp 2f
.endif
.previous
.long 1b
.text
.text
vector=vector+1
.endif
.endr
2: jmp common_interrupt
.endr
END(irq_entries_start)
@ -652,8 +661,9 @@ END(interrupt)
* the CPU automatically disables interrupts when executing an IRQ vector,
* so IRQ-flags tracing has to follow that:
*/
ALIGN
.p2align CONFIG_X86_L1_CACHE_SHIFT
common_interrupt:
addl $-0x80,(%esp) /* Adjust vector into the [-256,-1] range */
SAVE_ALL
TRACE_IRQS_OFF
movl %esp,%eax