AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Merge remote-tracking branches 'spi/topic/pxa', 'spi/topic/rb4xx', 'spi/topic/rspi', 'spi/topic/s3c64xx' and 'spi/topic/sh-msiof' into spi-next

Browse Source
This commit is contained in:
Mark Brown 2015-06-18 00:19:53 +01:00
commit b9e2c097ef
11 changed files with 329 additions and 586 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
drivers/spi/Kconfig
View File

@ -395,16 +395,9 @@ config SPI_PPC4xx
help
This selects a driver for the PPC4xx SPI Controller.
config SPI_PXA2XX_PXADMA
bool "PXA2xx SSP legacy PXA DMA API support"
depends on SPI_PXA2XX && ARCH_PXA
help
Enable PXA private legacy DMA API support. Note that this is
deprecated in favor of generic DMA engine API.
config SPI_PXA2XX_DMA
def_bool y
depends on SPI_PXA2XX && !SPI_PXA2XX_PXADMA
depends on SPI_PXA2XX
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
@ -430,6 +423,12 @@ config SPI_ROCKCHIP
The main usecase of this controller is to use spi flash as boot
device.
config SPI_RB4XX
tristate "Mikrotik RB4XX SPI master"
depends on SPI_MASTER && ATH79
help
SPI controller driver for the Mikrotik RB4xx series boards.
config SPI_RSPI
tristate "Renesas RSPI/QSPI controller"
depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST

2
drivers/spi/Makefile
View File

@ -60,12 +60,12 @@ obj-$(CONFIG_SPI_ORION) += spi-orion.o
obj-$(CONFIG_SPI_PL022) += spi-pl022.o
obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o
spi-pxa2xx-platform-objs := spi-pxa2xx.o
spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_PXADMA) += spi-pxa2xx-pxadma.o
spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o

8
drivers/spi/spi-pxa2xx-pci.c
View File

@ -62,7 +62,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.max_clk_rate = 3686400,
},
[PORT_BYT] = {
.type = LPSS_SSP,
.type = LPSS_BYT_SSP,
.port_id = 0,
.num_chipselect = 1,
.max_clk_rate = 50000000,
@ -70,7 +70,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.rx_param = &byt_rx_param,
},
[PORT_BSW0] = {
.type = LPSS_SSP,
.type = LPSS_BYT_SSP,
.port_id = 0,
.num_chipselect = 1,
.max_clk_rate = 50000000,
@ -78,7 +78,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.rx_param = &bsw0_rx_param,
},
[PORT_BSW1] = {
.type = LPSS_SSP,
.type = LPSS_BYT_SSP,
.port_id = 1,
.num_chipselect = 1,
.max_clk_rate = 50000000,
@ -86,7 +86,7 @@ static struct pxa_spi_info spi_info_configs[] = {
.rx_param = &bsw1_rx_param,
},
[PORT_BSW2] = {
.type = LPSS_SSP,
.type = LPSS_BYT_SSP,
.port_id = 2,
.num_chipselect = 1,
.max_clk_rate = 50000000,

487
drivers/spi/spi-pxa2xx-pxadma.c
View File

@ -1,487 +0,0 @@
/*
* PXA2xx SPI private DMA support.
*
* Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/pxa2xx_ssp.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <mach/dma.h>
#include "spi-pxa2xx.h"
#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
bool pxa2xx_spi_dma_is_possible(size_t len)
{
/* Try to map dma buffer and do a dma transfer if successful, but
* only if the length is non-zero and less than MAX_DMA_LEN.
*
* Zero-length non-descriptor DMA is illegal on PXA2xx; force use
* of PIO instead. Care is needed above because the transfer may
* have have been passed with buffers that are already dma mapped.
* A zero-length transfer in PIO mode will not try to write/read
* to/from the buffers
*
* REVISIT large transfers are exactly where we most want to be
* using DMA. If this happens much, split those transfers into
* multiple DMA segments rather than forcing PIO.
*/
return len > 0 && len <= MAX_DMA_LEN;
}
int pxa2xx_spi_map_dma_buffers(struct driver_data *drv_data)
{
struct spi_message *msg = drv_data->cur_msg;
struct device *dev = &msg->spi->dev;
if (!drv_data->cur_chip->enable_dma)
return 0;
if (msg->is_dma_mapped)
return drv_data->rx_dma && drv_data->tx_dma;
if (!IS_DMA_ALIGNED(drv_data->rx) || !IS_DMA_ALIGNED(drv_data->tx))
return 0;
/* Modify setup if rx buffer is null */
if (drv_data->rx == NULL) {
*drv_data->null_dma_buf = 0;
drv_data->rx = drv_data->null_dma_buf;
drv_data->rx_map_len = 4;
} else
drv_data->rx_map_len = drv_data->len;
/* Modify setup if tx buffer is null */
if (drv_data->tx == NULL) {
*drv_data->null_dma_buf = 0;
drv_data->tx = drv_data->null_dma_buf;
drv_data->tx_map_len = 4;
} else
drv_data->tx_map_len = drv_data->len;
/* Stream map the tx buffer. Always do DMA_TO_DEVICE first
* so we flush the cache *before* invalidating it, in case
* the tx and rx buffers overlap.
*/
drv_data->tx_dma = dma_map_single(dev, drv_data->tx,
drv_data->tx_map_len, DMA_TO_DEVICE);
if (dma_mapping_error(dev, drv_data->tx_dma))
return 0;
/* Stream map the rx buffer */
drv_data->rx_dma = dma_map_single(dev, drv_data->rx,
drv_data->rx_map_len, DMA_FROM_DEVICE);
if (dma_mapping_error(dev, drv_data->rx_dma)) {
dma_unmap_single(dev, drv_data->tx_dma,
drv_data->tx_map_len, DMA_TO_DEVICE);
return 0;
}
return 1;
}
static void pxa2xx_spi_unmap_dma_buffers(struct driver_data *drv_data)
{
struct device *dev;
if (!drv_data->dma_mapped)
return;
if (!drv_data->cur_msg->is_dma_mapped) {
dev = &drv_data->cur_msg->spi->dev;
dma_unmap_single(dev, drv_data->rx_dma,
drv_data->rx_map_len, DMA_FROM_DEVICE);
dma_unmap_single(dev, drv_data->tx_dma,
drv_data->tx_map_len, DMA_TO_DEVICE);
}
drv_data->dma_mapped = 0;
}
static int wait_ssp_rx_stall(struct driver_data *drv_data)
{
unsigned long limit = loops_per_jiffy << 1;
while ((pxa2xx_spi_read(drv_data, SSSR) & SSSR_BSY) && --limit)
cpu_relax();
return limit;
}
static int wait_dma_channel_stop(int channel)
{
unsigned long limit = loops_per_jiffy << 1;
while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
cpu_relax();
return limit;
}
static void pxa2xx_spi_dma_error_stop(struct driver_data *drv_data,
const char *msg)
{
/* Stop and reset */
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
write_SSSR_CS(drv_data, drv_data->clear_sr);
pxa2xx_spi_write(drv_data, SSCR1,
pxa2xx_spi_read(drv_data, SSCR1)
& ~drv_data->dma_cr1);
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, 0);
pxa2xx_spi_flush(drv_data);
pxa2xx_spi_write(drv_data, SSCR0,
pxa2xx_spi_read(drv_data, SSCR0) & ~SSCR0_SSE);
pxa2xx_spi_unmap_dma_buffers(drv_data);
dev_err(&drv_data->pdev->dev, "%s\n", msg);
drv_data->cur_msg->state = ERROR_STATE;
tasklet_schedule(&drv_data->pump_transfers);
}
static void pxa2xx_spi_dma_transfer_complete(struct driver_data *drv_data)
{
struct spi_message *msg = drv_data->cur_msg;
/* Clear and disable interrupts on SSP and DMA channels*/
pxa2xx_spi_write(drv_data, SSCR1,
pxa2xx_spi_read(drv_data, SSCR1)
& ~drv_data->dma_cr1);
write_SSSR_CS(drv_data, drv_data->clear_sr);
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
if (wait_dma_channel_stop(drv_data->rx_channel) == 0)
dev_err(&drv_data->pdev->dev,
"dma_handler: dma rx channel stop failed\n");
if (wait_ssp_rx_stall(drv_data->ioaddr) == 0)
dev_err(&drv_data->pdev->dev,
"dma_transfer: ssp rx stall failed\n");
pxa2xx_spi_unmap_dma_buffers(drv_data);
/* update the buffer pointer for the amount completed in dma */
drv_data->rx += drv_data->len -
(DCMD(drv_data->rx_channel) & DCMD_LENGTH);
/* read trailing data from fifo, it does not matter how many
* bytes are in the fifo just read until buffer is full
* or fifo is empty, which ever occurs first */
drv_data->read(drv_data);
/* return count of what was actually read */
msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
/* Transfer delays and chip select release are
* handled in pump_transfers or giveback
*/
/* Move to next transfer */
msg->state = pxa2xx_spi_next_transfer(drv_data);
/* Schedule transfer tasklet */
tasklet_schedule(&drv_data->pump_transfers);
}
void pxa2xx_spi_dma_handler(int channel, void *data)
{
struct driver_data *drv_data = data;
u32 irq_status = DCSR(channel) & DMA_INT_MASK;
if (irq_status & DCSR_BUSERR) {
if (channel == drv_data->tx_channel)
pxa2xx_spi_dma_error_stop(drv_data,
"dma_handler: bad bus address on tx channel");
else
pxa2xx_spi_dma_error_stop(drv_data,
"dma_handler: bad bus address on rx channel");
return;
}
/* PXA255x_SSP has no timeout interrupt, wait for tailing bytes */
if ((channel == drv_data->tx_channel)
&& (irq_status & DCSR_ENDINTR)
&& (drv_data->ssp_type == PXA25x_SSP)) {
/* Wait for rx to stall */
if (wait_ssp_rx_stall(drv_data) == 0)
dev_err(&drv_data->pdev->dev,
"dma_handler: ssp rx stall failed\n");
/* finish this transfer, start the next */
pxa2xx_spi_dma_transfer_complete(drv_data);
}
}
irqreturn_t pxa2xx_spi_dma_transfer(struct driver_data *drv_data)
{
u32 irq_status;
irq_status = pxa2xx_spi_read(drv_data, SSSR) & drv_data->mask_sr;
if (irq_status & SSSR_ROR) {
pxa2xx_spi_dma_error_stop(drv_data,
"dma_transfer: fifo overrun");
return IRQ_HANDLED;
}
/* Check for false positive timeout */
if ((irq_status & SSSR_TINT)
&& (DCSR(drv_data->tx_channel) & DCSR_RUN)) {
pxa2xx_spi_write(drv_data, SSSR, SSSR_TINT);
return IRQ_HANDLED;
}
if (irq_status & SSSR_TINT || drv_data->rx == drv_data->rx_end) {
/* Clear and disable timeout interrupt, do the rest in
* dma_transfer_complete */
if (!pxa25x_ssp_comp(drv_data))
pxa2xx_spi_write(drv_data, SSTO, 0);
/* finish this transfer, start the next */
pxa2xx_spi_dma_transfer_complete(drv_data);
return IRQ_HANDLED;
}
/* Opps problem detected */
return IRQ_NONE;
}
int pxa2xx_spi_dma_prepare(struct driver_data *drv_data, u32 dma_burst)
{
u32 dma_width;
switch (drv_data->n_bytes) {
case 1:
dma_width = DCMD_WIDTH1;
break;
case 2:
dma_width = DCMD_WIDTH2;
break;
default:
dma_width = DCMD_WIDTH4;
break;
}
/* Setup rx DMA Channel */
DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
DSADR(drv_data->rx_channel) = drv_data->ssdr_physical;
DTADR(drv_data->rx_channel) = drv_data->rx_dma;
if (drv_data->rx == drv_data->null_dma_buf)
/* No target address increment */
DCMD(drv_data->rx_channel) = DCMD_FLOWSRC
| dma_width
| dma_burst
| drv_data->len;
else
DCMD(drv_data->rx_channel) = DCMD_INCTRGADDR
| DCMD_FLOWSRC
| dma_width
| dma_burst
| drv_data->len;
/* Setup tx DMA Channel */
DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
DSADR(drv_data->tx_channel) = drv_data->tx_dma;
DTADR(drv_data->tx_channel) = drv_data->ssdr_physical;
if (drv_data->tx == drv_data->null_dma_buf)
/* No source address increment */
DCMD(drv_data->tx_channel) = DCMD_FLOWTRG
| dma_width
| dma_burst
| drv_data->len;
else
DCMD(drv_data->tx_channel) = DCMD_INCSRCADDR
| DCMD_FLOWTRG
| dma_width
| dma_burst
| drv_data->len;
/* Enable dma end irqs on SSP to detect end of transfer */
if (drv_data->ssp_type == PXA25x_SSP)
DCMD(drv_data->tx_channel) |= DCMD_ENDIRQEN;
return 0;
}
void pxa2xx_spi_dma_start(struct driver_data *drv_data)
{
DCSR(drv_data->rx_channel) |= DCSR_RUN;
DCSR(drv_data->tx_channel) |= DCSR_RUN;
}
int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
{
struct device *dev = &drv_data->pdev->dev;
struct ssp_device *ssp = drv_data->ssp;
/* Get two DMA channels (rx and tx) */
drv_data->rx_channel = pxa_request_dma("pxa2xx_spi_ssp_rx",
DMA_PRIO_HIGH,
pxa2xx_spi_dma_handler,
drv_data);
if (drv_data->rx_channel < 0) {
dev_err(dev, "problem (%d) requesting rx channel\n",
drv_data->rx_channel);
return -ENODEV;
}
drv_data->tx_channel = pxa_request_dma("pxa2xx_spi_ssp_tx",
DMA_PRIO_MEDIUM,
pxa2xx_spi_dma_handler,
drv_data);
if (drv_data->tx_channel < 0) {
dev_err(dev, "problem (%d) requesting tx channel\n",
drv_data->tx_channel);
pxa_free_dma(drv_data->rx_channel);
return -ENODEV;
}
DRCMR(ssp->drcmr_rx) = DRCMR_MAPVLD | drv_data->rx_channel;
DRCMR(ssp->drcmr_tx) = DRCMR_MAPVLD | drv_data->tx_channel;
return 0;
}
void pxa2xx_spi_dma_release(struct driver_data *drv_data)
{
struct ssp_device *ssp = drv_data->ssp;
DRCMR(ssp->drcmr_rx) = 0;
DRCMR(ssp->drcmr_tx) = 0;
if (drv_data->tx_channel != 0)
pxa_free_dma(drv_data->tx_channel);
if (drv_data->rx_channel != 0)
pxa_free_dma(drv_data->rx_channel);
}
void pxa2xx_spi_dma_resume(struct driver_data *drv_data)
{
if (drv_data->rx_channel != -1)
DRCMR(drv_data->ssp->drcmr_rx) =
DRCMR_MAPVLD | drv_data->rx_channel;
if (drv_data->tx_channel != -1)
DRCMR(drv_data->ssp->drcmr_tx) =
DRCMR_MAPVLD | drv_data->tx_channel;
}
int pxa2xx_spi_set_dma_burst_and_threshold(struct chip_data *chip,
struct spi_device *spi,
u8 bits_per_word, u32 *burst_code,
u32 *threshold)
{
struct pxa2xx_spi_chip *chip_info =
(struct pxa2xx_spi_chip *)spi->controller_data;
int bytes_per_word;
int burst_bytes;
int thresh_words;
int req_burst_size;
int retval = 0;
/* Set the threshold (in registers) to equal the same amount of data
* as represented by burst size (in bytes). The computation below
* is (burst_size rounded up to nearest 8 byte, word or long word)
* divided by (bytes/register); the tx threshold is the inverse of
* the rx, so that there will always be enough data in the rx fifo
* to satisfy a burst, and there will always be enough space in the
* tx fifo to accept a burst (a tx burst will overwrite the fifo if
* there is not enough space), there must always remain enough empty
* space in the rx fifo for any data loaded to the tx fifo.
* Whenever burst_size (in bytes) equals bits/word, the fifo threshold
* will be 8, or half the fifo;
* The threshold can only be set to 2, 4 or 8, but not 16, because
* to burst 16 to the tx fifo, the fifo would have to be empty;
* however, the minimum fifo trigger level is 1, and the tx will
* request service when the fifo is at this level, with only 15 spaces.
*/
/* find bytes/word */
if (bits_per_word <= 8)
bytes_per_word = 1;
else if (bits_per_word <= 16)
bytes_per_word = 2;
else
bytes_per_word = 4;
/* use struct pxa2xx_spi_chip->dma_burst_size if available */
if (chip_info)
req_burst_size = chip_info->dma_burst_size;
else {
switch (chip->dma_burst_size) {
default:
/* if the default burst size is not set,
* do it now */
chip->dma_burst_size = DCMD_BURST8;
case DCMD_BURST8:
req_burst_size = 8;
break;
case DCMD_BURST16:
req_burst_size = 16;
break;
case DCMD_BURST32:
req_burst_size = 32;
break;
}
}
if (req_burst_size <= 8) {
*burst_code = DCMD_BURST8;
burst_bytes = 8;
} else if (req_burst_size <= 16) {
if (bytes_per_word == 1) {
/* don't burst more than 1/2 the fifo */
*burst_code = DCMD_BURST8;
burst_bytes = 8;
retval = 1;
} else {
*burst_code = DCMD_BURST16;
burst_bytes = 16;
}
} else {
if (bytes_per_word == 1) {
/* don't burst more than 1/2 the fifo */
*burst_code = DCMD_BURST8;
burst_bytes = 8;
retval = 1;
} else if (bytes_per_word == 2) {
/* don't burst more than 1/2 the fifo */
*burst_code = DCMD_BURST16;
burst_bytes = 16;
retval = 1;
} else {
*burst_code = DCMD_BURST32;
burst_bytes = 32;
}
}
thresh_words = burst_bytes / bytes_per_word;
/* thresh_words will be between 2 and 8 */
*threshold = (SSCR1_RxTresh(thresh_words) & SSCR1_RFT)
| (SSCR1_TxTresh(16-thresh_words) & SSCR1_TFT);
return retval;
}

157
drivers/spi/spi-pxa2xx.c
View File

@ -60,21 +60,60 @@ MODULE_ALIAS("platform:pxa2xx-spi");
| QUARK_X1000_SSCR1_TFT \
| SSCR1_SPH | SSCR1_SPO | SSCR1_LBM)
#define LPSS_RX_THRESH_DFLT 64
#define LPSS_TX_LOTHRESH_DFLT 160
#define LPSS_TX_HITHRESH_DFLT 224
/* Offset from drv_data->lpss_base */
#define GENERAL_REG 0x08
#define GENERAL_REG_RXTO_HOLDOFF_DISABLE BIT(24)
#define SSP_REG 0x0c
#define SPI_CS_CONTROL 0x18
#define SPI_CS_CONTROL_SW_MODE BIT(0)
#define SPI_CS_CONTROL_CS_HIGH BIT(1)
struct lpss_config {
/* LPSS offset from drv_data->ioaddr */
unsigned offset;
/* Register offsets from drv_data->lpss_base or -1 */
int reg_general;
int reg_ssp;
int reg_cs_ctrl;
/* FIFO thresholds */
u32 rx_threshold;
u32 tx_threshold_lo;
u32 tx_threshold_hi;
};
/* Keep these sorted with enum pxa_ssp_type */
static const struct lpss_config lpss_platforms[] = {
{ /* LPSS_LPT_SSP */
.offset = 0x800,
.reg_general = 0x08,
.reg_ssp = 0x0c,
.reg_cs_ctrl = 0x18,
.rx_threshold = 64,
.tx_threshold_lo = 160,
.tx_threshold_hi = 224,
},
{ /* LPSS_BYT_SSP */
.offset = 0x400,
.reg_general = 0x08,
.reg_ssp = 0x0c,
.reg_cs_ctrl = 0x18,
.rx_threshold = 64,
.tx_threshold_lo = 160,
.tx_threshold_hi = 224,
},
};
static inline const struct lpss_config
*lpss_get_config(const struct driver_data *drv_data)
{
return &lpss_platforms[drv_data->ssp_type - LPSS_LPT_SSP];
}
static bool is_lpss_ssp(const struct driver_data *drv_data)
{
return drv_data->ssp_type == LPSS_SSP;
switch (drv_data->ssp_type) {
case LPSS_LPT_SSP:
case LPSS_BYT_SSP:
return true;
default:
return false;
}
}
static bool is_quark_x1000_ssp(const struct driver_data *drv_data)
@ -192,63 +231,43 @@ static void __lpss_ssp_write_priv(struct driver_data *drv_data,
*/
static void lpss_ssp_setup(struct driver_data *drv_data)
{
unsigned offset = 0x400;
u32 value, orig;
const struct lpss_config *config;
u32 value;
/*
* Perform auto-detection of the LPSS SSP private registers. They
* can be either at 1k or 2k offset from the base address.
*/
orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
/* Test SPI_CS_CONTROL_SW_MODE bit enabling */
value = orig | SPI_CS_CONTROL_SW_MODE;
writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
if (value != (orig | SPI_CS_CONTROL_SW_MODE)) {
offset = 0x800;
goto detection_done;
}
orig = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
/* Test SPI_CS_CONTROL_SW_MODE bit disabling */
value = orig & ~SPI_CS_CONTROL_SW_MODE;
writel(value, drv_data->ioaddr + offset + SPI_CS_CONTROL);
value = readl(drv_data->ioaddr + offset + SPI_CS_CONTROL);
if (value != (orig & ~SPI_CS_CONTROL_SW_MODE)) {
offset = 0x800;
goto detection_done;
}
detection_done:
/* Now set the LPSS base */
drv_data->lpss_base = drv_data->ioaddr + offset;
config = lpss_get_config(drv_data);
drv_data->lpss_base = drv_data->ioaddr + config->offset;
/* Enable software chip select control */
value = SPI_CS_CONTROL_SW_MODE | SPI_CS_CONTROL_CS_HIGH;
__lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
/* Enable multiblock DMA transfers */
if (drv_data->master_info->enable_dma) {
__lpss_ssp_write_priv(drv_data, SSP_REG, 1);
__lpss_ssp_write_priv(drv_data, config->reg_ssp, 1);
value = __lpss_ssp_read_priv(drv_data, GENERAL_REG);
value |= GENERAL_REG_RXTO_HOLDOFF_DISABLE;
__lpss_ssp_write_priv(drv_data, GENERAL_REG, value);
if (config->reg_general >= 0) {
value = __lpss_ssp_read_priv(drv_data,
config->reg_general);
value |= GENERAL_REG_RXTO_HOLDOFF_DISABLE;
__lpss_ssp_write_priv(drv_data,
config->reg_general, value);
}
}
}
static void lpss_ssp_cs_control(struct driver_data *drv_data, bool enable)
{
const struct lpss_config *config;
u32 value;
value = __lpss_ssp_read_priv(drv_data, SPI_CS_CONTROL);
config = lpss_get_config(drv_data);
value = __lpss_ssp_read_priv(drv_data, config->reg_cs_ctrl);
if (enable)
value &= ~SPI_CS_CONTROL_CS_HIGH;
else
value |= SPI_CS_CONTROL_CS_HIGH;
__lpss_ssp_write_priv(drv_data, SPI_CS_CONTROL, value);
__lpss_ssp_write_priv(drv_data, config->reg_cs_ctrl, value);
}
static void cs_assert(struct driver_data *drv_data)
@ -1075,6 +1094,7 @@ static int setup(struct spi_device *spi)
{
struct pxa2xx_spi_chip *chip_info = NULL;
struct chip_data *chip;
const struct lpss_config *config;
struct driver_data *drv_data = spi_master_get_devdata(spi->master);
unsigned int clk_div;
uint tx_thres, tx_hi_thres, rx_thres;
@ -1085,10 +1105,12 @@ static int setup(struct spi_device *spi)
tx_hi_thres = 0;
rx_thres = RX_THRESH_QUARK_X1000_DFLT;
break;
case LPSS_SSP:
tx_thres = LPSS_TX_LOTHRESH_DFLT;
tx_hi_thres = LPSS_TX_HITHRESH_DFLT;
rx_thres = LPSS_RX_THRESH_DFLT;
case LPSS_LPT_SSP:
case LPSS_BYT_SSP:
config = lpss_get_config(drv_data);
tx_thres = config->tx_threshold_lo;
tx_hi_thres = config->tx_threshold_hi;
rx_thres = config->rx_threshold;
break;
default:
tx_thres = TX_THRESH_DFLT;
@ -1242,6 +1264,18 @@ static void cleanup(struct spi_device *spi)
}
#ifdef CONFIG_ACPI
static const struct acpi_device_id pxa2xx_spi_acpi_match[] = {
{ "INT33C0", LPSS_LPT_SSP },
{ "INT33C1", LPSS_LPT_SSP },
{ "INT3430", LPSS_LPT_SSP },
{ "INT3431", LPSS_LPT_SSP },
{ "80860F0E", LPSS_BYT_SSP },
{ "8086228E", LPSS_BYT_SSP },
{ },
};
MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
static struct pxa2xx_spi_master *
pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
{
@ -1249,12 +1283,19 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
struct acpi_device *adev;
struct ssp_device *ssp;
struct resource *res;
int devid;
const struct acpi_device_id *id;
int devid, type;
if (!ACPI_HANDLE(&pdev->dev) ||
acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
return NULL;
id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
if (id)
type = (int)id->driver_data;
else
return NULL;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return NULL;
@ -1272,7 +1313,7 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
ssp->clk = devm_clk_get(&pdev->dev, NULL);
ssp->irq = platform_get_irq(pdev, 0);
ssp->type = LPSS_SSP;
ssp->type = type;
ssp->pdev = pdev;
ssp->port_id = -1;
@ -1285,16 +1326,6 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
return pdata;
}
static struct acpi_device_id pxa2xx_spi_acpi_match[] = {
{ "INT33C0", 0 },
{ "INT33C1", 0 },
{ "INT3430", 0 },
{ "INT3431", 0 },
{ "80860F0E", 0 },
{ "8086228E", 0 },
{ },
};
MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
#else
static inline struct pxa2xx_spi_master *
pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)

6
drivers/spi/spi-pxa2xx.h
View File

@ -162,11 +162,7 @@ extern void *pxa2xx_spi_next_transfer(struct driver_data *drv_data);
/*
* Select the right DMA implementation.
*/
#if defined(CONFIG_SPI_PXA2XX_PXADMA)
#define SPI_PXA2XX_USE_DMA 1
#define MAX_DMA_LEN 8191
#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TINTE)
#elif defined(CONFIG_SPI_PXA2XX_DMA)
#if defined(CONFIG_SPI_PXA2XX_DMA)
#define SPI_PXA2XX_USE_DMA 1
#define MAX_DMA_LEN SZ_64K
#define DEFAULT_DMA_CR1 (SSCR1_TSRE | SSCR1_RSRE | SSCR1_TRAIL)

210
drivers/spi/spi-rb4xx.c Normal file
View File

@ -0,0 +1,210 @@
/*
* SPI controller driver for the Mikrotik RB4xx boards
*
* Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2015 Bert Vermeulen <bert@biot.com>
*
* This file was based on the patches for Linux 2.6.27.39 published by
* MikroTik for their RouterBoard 4xx series devices.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <asm/mach-ath79/ar71xx_regs.h>
struct rb4xx_spi {
void __iomem *base;
struct clk *clk;
};
static inline u32 rb4xx_read(struct rb4xx_spi *rbspi, u32 reg)
{
return __raw_readl(rbspi->base + reg);
}
static inline void rb4xx_write(struct rb4xx_spi *rbspi, u32 reg, u32 value)
{
__raw_writel(value, rbspi->base + reg);
}
static inline void do_spi_clk(struct rb4xx_spi *rbspi, u32 spi_ioc, int value)
{
u32 regval;
regval = spi_ioc;
if (value & BIT(0))
regval |= AR71XX_SPI_IOC_DO;
rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval);
rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval | AR71XX_SPI_IOC_CLK);
}
static void do_spi_byte(struct rb4xx_spi *rbspi, u32 spi_ioc, u8 byte)
{
int i;
for (i = 7; i >= 0; i--)
do_spi_clk(rbspi, spi_ioc, byte >> i);
}
/* The CS2 pin is used to clock in a second bit per clock cycle. */
static inline void do_spi_clk_two(struct rb4xx_spi *rbspi, u32 spi_ioc,
u8 value)
{
u32 regval;
regval = spi_ioc;
if (value & BIT(1))
regval |= AR71XX_SPI_IOC_DO;
if (value & BIT(0))
regval |= AR71XX_SPI_IOC_CS2;
rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval);
rb4xx_write(rbspi, AR71XX_SPI_REG_IOC, regval | AR71XX_SPI_IOC_CLK);
}
/* Two bits at a time, msb first */
static void do_spi_byte_two(struct rb4xx_spi *rbspi, u32 spi_ioc, u8 byte)
{
do_spi_clk_two(rbspi, spi_ioc, byte >> 6);
do_spi_clk_two(rbspi, spi_ioc, byte >> 4);
do_spi_clk_two(rbspi, spi_ioc, byte >> 2);
do_spi_clk_two(rbspi, spi_ioc, byte >> 0);
}
static void rb4xx_set_cs(struct spi_device *spi, bool enable)
{
struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master);
/*
* Setting CS is done along with bitbanging the actual values,
* since it's all on the same hardware register. However the
* CPLD needs CS deselected after every command.
*/
if (enable)
rb4xx_write(rbspi, AR71XX_SPI_REG_IOC,
AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1);
}
static int rb4xx_transfer_one(struct spi_master *master,
struct spi_device *spi, struct spi_transfer *t)
{
struct rb4xx_spi *rbspi = spi_master_get_devdata(master);
int i;
u32 spi_ioc;
u8 *rx_buf;
const u8 *tx_buf;
/*
* Prime the SPI register with the SPI device selected. The m25p80 boot
* flash and CPLD share the CS0 pin. This works because the CPLD's
* command set was designed to almost not clash with that of the
* boot flash.
*/
if (spi->chip_select == 2)
/* MMC */
spi_ioc = AR71XX_SPI_IOC_CS0;
else
/* Boot flash and CPLD */
spi_ioc = AR71XX_SPI_IOC_CS1;
tx_buf = t->tx_buf;
rx_buf = t->rx_buf;
for (i = 0; i < t->len; ++i) {
if (t->tx_nbits == SPI_NBITS_DUAL)
/* CPLD can use two-wire transfers */
do_spi_byte_two(rbspi, spi_ioc, tx_buf[i]);
else
do_spi_byte(rbspi, spi_ioc, tx_buf[i]);
if (!rx_buf)
continue;
rx_buf[i] = rb4xx_read(rbspi, AR71XX_SPI_REG_RDS);
}
spi_finalize_current_transfer(master);
return 0;
}
static int rb4xx_spi_probe(struct platform_device *pdev)
{
struct spi_master *master;
struct clk *ahb_clk;
struct rb4xx_spi *rbspi;
struct resource *r;
int err;
void __iomem *spi_base;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
spi_base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(spi_base))
return PTR_ERR(spi_base);
master = spi_alloc_master(&pdev->dev, sizeof(*rbspi));
if (!master)
return -ENOMEM;
ahb_clk = devm_clk_get(&pdev->dev, "ahb");
if (IS_ERR(ahb_clk))
return PTR_ERR(ahb_clk);
master->bus_num = 0;
master->num_chipselect = 3;
master->mode_bits = SPI_TX_DUAL;
master->bits_per_word_mask = BIT(7);
master->flags = SPI_MASTER_MUST_TX;
master->transfer_one = rb4xx_transfer_one;
master->set_cs = rb4xx_set_cs;
err = devm_spi_register_master(&pdev->dev, master);
if (err) {
dev_err(&pdev->dev, "failed to register SPI master\n");
return err;
}
err = clk_prepare_enable(ahb_clk);
if (err)
return err;
rbspi = spi_master_get_devdata(master);
rbspi->base = spi_base;
rbspi->clk = ahb_clk;
platform_set_drvdata(pdev, rbspi);
/* Enable SPI */
rb4xx_write(rbspi, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
return 0;
}
static int rb4xx_spi_remove(struct platform_device *pdev)
{
struct rb4xx_spi *rbspi = platform_get_drvdata(pdev);
clk_disable_unprepare(rbspi->clk);
return 0;
}
static struct platform_driver rb4xx_spi_drv = {
.probe = rb4xx_spi_probe,
.remove = rb4xx_spi_remove,
.driver = {
.name = "rb4xx-spi",
},
};
module_platform_driver(rb4xx_spi_drv);
MODULE_DESCRIPTION("Mikrotik RB4xx SPI controller driver");
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
MODULE_AUTHOR("Bert Vermeulen <bert@biot.com>");
MODULE_LICENSE("GPL v2");

23
drivers/spi/spi-rspi.c
View File

@ -665,15 +665,12 @@ static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi,
static int rspi_dma_check_then_transfer(struct rspi_data *rspi,
struct spi_transfer *xfer)
{
if (rspi->master->can_dma && __rspi_can_dma(rspi, xfer)) {
/* rx_buf can be NULL on RSPI on SH in TX-only Mode */
int ret = rspi_dma_transfer(rspi, &xfer->tx_sg,
xfer->rx_buf ? &xfer->rx_sg : NULL);
if (ret != -EAGAIN)
return 0;
}
if (!rspi->master->can_dma || !__rspi_can_dma(rspi, xfer))
return -EAGAIN;
return -EAGAIN;
/* rx_buf can be NULL on RSPI on SH in TX-only Mode */
return rspi_dma_transfer(rspi, &xfer->tx_sg,
xfer->rx_buf ? &xfer->rx_sg : NULL);
}
static int rspi_common_transfer(struct rspi_data *rspi,
@ -724,7 +721,7 @@ static int rspi_rz_transfer_one(struct spi_master *master,
return rspi_common_transfer(rspi, xfer);
}
static int qspi_trigger_transfer_out_int(struct rspi_data *rspi, const u8 *tx,
static int qspi_trigger_transfer_out_in(struct rspi_data *rspi, const u8 *tx,
u8 *rx, unsigned int len)
{
int i, n, ret;
@ -771,12 +768,8 @@ static int qspi_transfer_out_in(struct rspi_data *rspi,
if (ret != -EAGAIN)
return ret;
ret = qspi_trigger_transfer_out_int(rspi, xfer->tx_buf,
return qspi_trigger_transfer_out_in(rspi, xfer->tx_buf,
xfer->rx_buf, xfer->len);
if (ret < 0)
return ret;
return 0;
}
static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
@ -1300,7 +1293,7 @@ static int rspi_probe(struct platform_device *pdev)
return ret;
}
static struct platform_device_id spi_driver_ids[] = {
static const struct platform_device_id spi_driver_ids[] = {
{ "rspi", (kernel_ulong_t)&rspi_ops },
{ "rspi-rz", (kernel_ulong_t)&rspi_rz_ops },
{ "qspi", (kernel_ulong_t)&qspi_ops },

2
drivers/spi/spi-s3c64xx.c
View File

@ -1347,7 +1347,7 @@ static struct s3c64xx_spi_port_config exynos7_spi_port_config = {
.quirks = S3C64XX_SPI_QUIRK_CS_AUTO,
};
static struct platform_device_id s3c64xx_spi_driver_ids[] = {
static const struct platform_device_id s3c64xx_spi_driver_ids[] = {
{
.name = "s3c2443-spi",
.driver_data = (kernel_ulong_t)&s3c2443_spi_port_config,

2
drivers/spi/spi-sh-msiof.c
View File

@ -1263,7 +1263,7 @@ static int sh_msiof_spi_remove(struct platform_device *pdev)
return 0;
}
static struct platform_device_id spi_driver_ids[] = {
static const struct platform_device_id spi_driver_ids[] = {
{ "spi_sh_msiof", (kernel_ulong_t)&sh_data },
{ "spi_r8a7790_msiof", (kernel_ulong_t)&r8a779x_data },
{ "spi_r8a7791_msiof", (kernel_ulong_t)&r8a779x_data },

3
include/linux/pxa2xx_ssp.h
View File

@ -194,8 +194,9 @@ enum pxa_ssp_type {
PXA168_SSP,
PXA910_SSP,
CE4100_SSP,
LPSS_SSP,
QUARK_X1000_SSP,
LPSS_LPT_SSP, /* Keep LPSS types sorted with lpss_platforms[] */
LPSS_BYT_SSP,
};
struct ssp_device {