forked from luck/tmp_suning_uos_patched
[PATCH] USB: add support for AT91 gadget
This adds support for the USB peripheral controller on AT91 (rm9200, eventually also sam9261 or uClinux) platforms. More SOC support for Linux-USB ... an uncomplicated pure PIO driver. It'd be worth using this as a model, if you're starting a driver for some other peripheral controller. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
parent
39a269c09f
commit
bae4bd848d
|
@ -187,6 +187,23 @@ config USB_OTG
|
|||
|
||||
Select this only if your OMAP board has a Mini-AB connector.
|
||||
|
||||
config USB_GADGET_AT91
|
||||
boolean "AT91 USB Device Port"
|
||||
depends on ARCH_AT91RM9200
|
||||
select USB_GADGET_SELECTED
|
||||
help
|
||||
Many Atmel AT91 processors (such as the AT91RM2000) have a
|
||||
full speed USB Device Port with support for five configurable
|
||||
endpoints (plus endpoint zero).
|
||||
|
||||
Say "y" to link the driver statically, or "m" to build a
|
||||
dynamically linked module called "at91_udc" and force all
|
||||
gadget drivers to also be dynamically linked.
|
||||
|
||||
config USB_AT91
|
||||
tristate
|
||||
depends on USB_GADGET_AT91
|
||||
default USB_GADGET
|
||||
|
||||
config USB_GADGET_DUMMY_HCD
|
||||
boolean "Dummy HCD (DEVELOPMENT)"
|
||||
|
|
|
@ -7,6 +7,7 @@ obj-$(CONFIG_USB_PXA2XX) += pxa2xx_udc.o
|
|||
obj-$(CONFIG_USB_GOKU) += goku_udc.o
|
||||
obj-$(CONFIG_USB_OMAP) += omap_udc.o
|
||||
obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
|
||||
obj-$(CONFIG_USB_AT91) += at91_udc.o
|
||||
|
||||
#
|
||||
# USB gadget drivers
|
||||
|
|
1773
drivers/usb/gadget/at91_udc.c
Normal file
1773
drivers/usb/gadget/at91_udc.c
Normal file
File diff suppressed because it is too large
Load Diff
181
drivers/usb/gadget/at91_udc.h
Normal file
181
drivers/usb/gadget/at91_udc.h
Normal file
|
@ -0,0 +1,181 @@
|
|||
/*
|
||||
* Copyright (C) 2004 by Thomas Rathbone, HP Labs
|
||||
* Copyright (C) 2005 by Ivan Kokshaysky
|
||||
* Copyright (C) 2006 by SAN People
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the
|
||||
* Free Software Foundation, Inc.,
|
||||
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
|
||||
#ifndef AT91_UDC_H
|
||||
#define AT91_UDC_H
|
||||
|
||||
/*
|
||||
* USB Device Port (UDP) registers.
|
||||
* Based on AT91RM9200 datasheet revision E.
|
||||
*/
|
||||
|
||||
#define AT91_UDP_FRM_NUM 0x00 /* Frame Number Register */
|
||||
#define AT91_UDP_NUM (0x7ff << 0) /* Frame Number */
|
||||
#define AT91_UDP_FRM_ERR (1 << 16) /* Frame Error */
|
||||
#define AT91_UDP_FRM_OK (1 << 17) /* Frame OK */
|
||||
|
||||
#define AT91_UDP_GLB_STAT 0x04 /* Global State Register */
|
||||
#define AT91_UDP_FADDEN (1 << 0) /* Function Address Enable */
|
||||
#define AT91_UDP_CONFG (1 << 1) /* Configured */
|
||||
#define AT91_UDP_ESR (1 << 2) /* Enable Send Resume */
|
||||
#define AT91_UDP_RSMINPR (1 << 3) /* Resume has been sent */
|
||||
#define AT91_UDP_RMWUPE (1 << 4) /* Remote Wake Up Enable */
|
||||
|
||||
#define AT91_UDP_FADDR 0x08 /* Function Address Register */
|
||||
#define AT91_UDP_FADD (0x7f << 0) /* Function Address Value */
|
||||
#define AT91_UDP_FEN (1 << 8) /* Function Enable */
|
||||
|
||||
#define AT91_UDP_IER 0x10 /* Interrupt Enable Register */
|
||||
#define AT91_UDP_IDR 0x14 /* Interrupt Disable Register */
|
||||
#define AT91_UDP_IMR 0x18 /* Interrupt Mask Register */
|
||||
|
||||
#define AT91_UDP_ISR 0x1c /* Interrupt Status Register */
|
||||
#define AT91_UDP_EP(n) (1 << (n)) /* Endpoint Interrupt Status */
|
||||
#define AT91_UDP_RXSUSP (1 << 8) /* USB Suspend Interrupt Status */
|
||||
#define AT91_UDP_RXRSM (1 << 9) /* USB Resume Interrupt Status */
|
||||
#define AT91_UDP_EXTRSM (1 << 10) /* External Resume Interrupt Status */
|
||||
#define AT91_UDP_SOFINT (1 << 11) /* Start of Frame Interrupt Status */
|
||||
#define AT91_UDP_ENDBUSRES (1 << 12) /* End of Bus Reset Interrpt Status */
|
||||
#define AT91_UDP_WAKEUP (1 << 13) /* USB Wakeup Interrupt Status */
|
||||
|
||||
#define AT91_UDP_ICR 0x20 /* Interrupt Clear Register */
|
||||
#define AT91_UDP_RST_EP 0x28 /* Reset Endpoint Register */
|
||||
|
||||
#define AT91_UDP_CSR(n) (0x30+((n)*4)) /* Endpoint Control/Status Registers 0-7 */
|
||||
#define AT91_UDP_TXCOMP (1 << 0) /* Generates IN packet with data previously written in DPR */
|
||||
#define AT91_UDP_RX_DATA_BK0 (1 << 1) /* Receive Data Bank 0 */
|
||||
#define AT91_UDP_RXSETUP (1 << 2) /* Send STALL to the host */
|
||||
#define AT91_UDP_STALLSENT (1 << 3) /* Stall Sent / Isochronous error (Isochronous endpoints) */
|
||||
#define AT91_UDP_TXPKTRDY (1 << 4) /* Transmit Packet Ready */
|
||||
#define AT91_UDP_FORCESTALL (1 << 5) /* Force Stall */
|
||||
#define AT91_UDP_RX_DATA_BK1 (1 << 6) /* Receive Data Bank 1 */
|
||||
#define AT91_UDP_DIR (1 << 7) /* Transfer Direction */
|
||||
#define AT91_UDP_EPTYPE (7 << 8) /* Endpoint Type */
|
||||
#define AT91_UDP_EPTYPE_CTRL (0 << 8)
|
||||
#define AT91_UDP_EPTYPE_ISO_OUT (1 << 8)
|
||||
#define AT91_UDP_EPTYPE_BULK_OUT (2 << 8)
|
||||
#define AT91_UDP_EPTYPE_INT_OUT (3 << 8)
|
||||
#define AT91_UDP_EPTYPE_ISO_IN (5 << 8)
|
||||
#define AT91_UDP_EPTYPE_BULK_IN (6 << 8)
|
||||
#define AT91_UDP_EPTYPE_INT_IN (7 << 8)
|
||||
#define AT91_UDP_DTGLE (1 << 11) /* Data Toggle */
|
||||
#define AT91_UDP_EPEDS (1 << 15) /* Endpoint Enable/Disable */
|
||||
#define AT91_UDP_RXBYTECNT (0x7ff << 16) /* Number of bytes in FIFO */
|
||||
|
||||
#define AT91_UDP_FDR(n) (0x50+((n)*4)) /* Endpoint FIFO Data Registers 0-7 */
|
||||
|
||||
#define AT91_UDP_TXVC 0x74 /* Transceiver Control Register */
|
||||
#define AT91_UDP_TXVC_TXVDIS (1 << 8) /* Transceiver Disable */
|
||||
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
/*
|
||||
* controller driver data structures
|
||||
*/
|
||||
|
||||
#define NUM_ENDPOINTS 6
|
||||
|
||||
/*
|
||||
* hardware won't disable bus reset, or resume while the controller
|
||||
* is suspended ... watching suspend helps keep the logic symmetric.
|
||||
*/
|
||||
#define MINIMUS_INTERRUPTUS \
|
||||
(AT91_UDP_ENDBUSRES | AT91_UDP_RXRSM | AT91_UDP_RXSUSP)
|
||||
|
||||
struct at91_ep {
|
||||
struct usb_ep ep;
|
||||
struct list_head queue;
|
||||
struct at91_udc *udc;
|
||||
void __iomem *creg;
|
||||
|
||||
unsigned maxpacket:16;
|
||||
u8 int_mask;
|
||||
unsigned is_pingpong:1;
|
||||
|
||||
unsigned stopped:1;
|
||||
unsigned is_in:1;
|
||||
unsigned is_iso:1;
|
||||
unsigned fifo_bank:1;
|
||||
|
||||
const struct usb_endpoint_descriptor
|
||||
*desc;
|
||||
};
|
||||
|
||||
/*
|
||||
* driver is non-SMP, and just blocks IRQs whenever it needs
|
||||
* access protection for chip registers or driver state
|
||||
*/
|
||||
struct at91_udc {
|
||||
struct usb_gadget gadget;
|
||||
struct at91_ep ep[NUM_ENDPOINTS];
|
||||
struct usb_gadget_driver *driver;
|
||||
unsigned vbus:1;
|
||||
unsigned enabled:1;
|
||||
unsigned clocked:1;
|
||||
unsigned suspended:1;
|
||||
unsigned req_pending:1;
|
||||
unsigned wait_for_addr_ack:1;
|
||||
unsigned wait_for_config_ack:1;
|
||||
unsigned selfpowered:1;
|
||||
u8 addr;
|
||||
struct at91_udc_data board;
|
||||
struct clk *iclk, *fclk;
|
||||
struct platform_device *pdev;
|
||||
struct proc_dir_entry *pde;
|
||||
};
|
||||
|
||||
static inline struct at91_udc *to_udc(struct usb_gadget *g)
|
||||
{
|
||||
return container_of(g, struct at91_udc, gadget);
|
||||
}
|
||||
|
||||
struct at91_request {
|
||||
struct usb_request req;
|
||||
struct list_head queue;
|
||||
};
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef DEBUG
|
||||
#define DBG(stuff...) printk(KERN_DEBUG "udc: " stuff)
|
||||
#else
|
||||
#define DBG(stuff...) do{}while(0)
|
||||
#endif
|
||||
|
||||
#ifdef VERBOSE
|
||||
# define VDBG DBG
|
||||
#else
|
||||
# define VDBG(stuff...) do{}while(0)
|
||||
#endif
|
||||
|
||||
#ifdef PACKET_TRACE
|
||||
# define PACKET VDBG
|
||||
#else
|
||||
# define PACKET(stuff...) do{}while(0)
|
||||
#endif
|
||||
|
||||
#define ERR(stuff...) printk(KERN_ERR "udc: " stuff)
|
||||
#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
|
||||
#define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
|
||||
|
||||
#endif
|
||||
|
Loading…
Reference in New Issue
Block a user