AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

usb: gadget: ether: Allow jumbo frames

Browse Source 
USB network adapters support Jumbo frames. The only thing blocking
that feature is the code in the gadget driver that disposes of
packets larger than 1518 bytes, and the limit on the ioctl to set
the mtu.

This patch relaxes these limits, and allows up to 15k frames sizes.
The 15k value was chosen because 16k does not work on all platforms,
and usingclose to 16k will result in allocating 5 or 8 4k pages to
store the skb, wasting pages at no measurable performance gain.

On a topic-miami board (Zynq-7000), iperf3 performance reports:
MTU= 1500, PC-to-gadget: 139 Mbps, Gadget-to-PC: 116 Mbps
MTU=15000, PC-to-gadget: 239 Mbps, Gadget-to-PC: 361 Mbps

On boards with slower CPUs the performance improvement will be
relatively much larger, e.g. an OMAP-L138 increased from 40 to
220 Mbps using a similar patch on an  2.6.37 kernel.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Mike Looijmans 2015-08-05 08:54:55 +02:00 committed by Felipe Balbi
parent 428163d703
commit bba787a860
1 changed files with 7 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
drivers/usb/gadget/function/u_ether.c
View File

@ -48,6 +48,11 @@
#define UETH__VERSION "29-May-2008" #define UETH__VERSION "29-May-2008"
/* Experiments show that both Linux and Windows hosts allow up to 16k
* frame sizes. Set the max size to 15k+52 to prevent allocating 32k
* blocks and still have efficient handling. */
#define GETHER_MAX_ETH_FRAME_LEN 15412
struct eth_dev { struct eth_dev {
/* lock is held while accessing port_usb /* lock is held while accessing port_usb
*/ */
@ -146,7 +151,7 @@ static int ueth_change_mtu(struct net_device *net, int new_mtu)
spin_lock_irqsave(&dev->lock, flags); spin_lock_irqsave(&dev->lock, flags);
if (dev->port_usb) if (dev->port_usb)
status = -EBUSY; status = -EBUSY;
else if (new_mtu <= ETH_HLEN || new_mtu > ETH_FRAME_LEN) else if (new_mtu <= ETH_HLEN || new_mtu > GETHER_MAX_ETH_FRAME_LEN)
status = -ERANGE; status = -ERANGE;
else else
net->mtu = new_mtu; net->mtu = new_mtu;
@ -294,7 +299,7 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req)
while (skb2) { while (skb2) {
if (status < 0 if (status < 0
|| ETH_HLEN > skb2->len || ETH_HLEN > skb2->len
|| skb2->len > VLAN_ETH_FRAME_LEN) { || skb2->len > GETHER_MAX_ETH_FRAME_LEN) {
dev->net->stats.rx_errors++; dev->net->stats.rx_errors++;
dev->net->stats.rx_length_errors++; dev->net->stats.rx_length_errors++;
DBG(dev, "rx length %d\n", skb2->len); DBG(dev, "rx length %d\n", skb2->len);