AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Browse Source
This commit is contained in:
David S. Miller 2010-11-14 11:57:05 -08:00
commit c25ecd0a21
380 changed files with 8976 additions and 2742 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
Documentation/ABI/obsolete/proc-pid-oom_adj Normal file
View File

@ -0,0 +1,22 @@
What: /proc/<pid>/oom_adj
When: August 2012
Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's
badness heuristic used to determine which task to kill when the kernel
is out of memory.
The badness heuristic has since been rewritten since the introduction of
this tunable such that its meaning is deprecated. The value was
implemented as a bitshift on a score generated by the badness()
function that did not have any precise units of measure. With the
rewrite, the score is given as a proportion of available memory to the
task allocating pages, so using a bitshift which grows the score
exponentially is, thus, impossible to tune with fine granularity.
A much more powerful interface, /proc/<pid>/oom_score_adj, was
introduced with the oom killer rewrite that allows users to increase or
decrease the badness() score linearly. This interface will replace
/proc/<pid>/oom_adj.
A warning will be emitted to the kernel log if an application uses this
deprecated interface. After it is printed once, future warnings will be
suppressed until the kernel is rebooted.

8
Documentation/block/switching-sched.txt
View File

@ -16,7 +16,7 @@ you can do so by typing:
As of the Linux 2.6.10 kernel, it is now possible to change the
IO scheduler for a given block device on the fly (thus making it possible,
for instance, to set the CFQ scheduler for the system default, but
set a specific device to use the anticipatory or noop schedulers - which
set a specific device to use the deadline or noop schedulers - which
can improve that device's throughput).
To set a specific scheduler, simply do this:
@ -31,7 +31,7 @@ a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
will be displayed, with the currently selected scheduler in brackets:
# cat /sys/block/hda/queue/scheduler
noop anticipatory deadline [cfq]
# echo anticipatory > /sys/block/hda/queue/scheduler
noop deadline [cfq]
# echo deadline > /sys/block/hda/queue/scheduler
# cat /sys/block/hda/queue/scheduler
noop [anticipatory] deadline cfq
noop [deadline] cfq

11
Documentation/filesystems/xfs-delayed-logging-design.txt
View File

@ -794,17 +794,6 @@ designed.
Roadmap:
2.6.37 Remove experimental tag from mount option
=> should be roughly 6 months after initial merge
=> enough time to:
=> gain confidence and fix problems reported by early
adopters (a.k.a. guinea pigs)
=> address worst performance regressions and undesired
behaviours
=> start tuning/optimising code for parallelism
=> start tuning/optimising algorithms consuming
excessive CPU time
2.6.39 Switch default mount option to use delayed logging
=> should be roughly 12 months after initial merge
=> enough time to shake out remaining problems before next round of

2
Documentation/kernel-parameters.txt
View File

@ -706,7 +706,7 @@ and is between 256 and 4096 characters. It is defined in the file
arch/x86/kernel/cpu/cpufreq/elanfreq.c.
elevator= [IOSCHED]
Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
Format: {"cfq" | "deadline" | "noop"}
See Documentation/block/as-iosched.txt and
Documentation/block/deadline-iosched.txt for details.

19
Documentation/leds-class.txt
View File

@ -60,15 +60,18 @@ Hardware accelerated blink of LEDs
Some LEDs can be programmed to blink without any CPU interaction. To
support this feature, a LED driver can optionally implement the
blink_set() function (see <linux/leds.h>). If implemented, triggers can
attempt to use it before falling back to software timers. The blink_set()
function should return 0 if the blink setting is supported, or -EINVAL
otherwise, which means that LED blinking will be handled by software.
blink_set() function (see <linux/leds.h>). To set an LED to blinking,
however, it is better to use use the API function led_blink_set(),
as it will check and implement software fallback if necessary.
The blink_set() function should choose a user friendly blinking
value if it is called with *delay_on==0 && *delay_off==0 parameters. In
this case the driver should give back the chosen value through delay_on
and delay_off parameters to the leds subsystem.
To turn off blinking again, use the API function led_brightness_set()
as that will not just set the LED brightness but also stop any software
timers that may have been required for blinking.
The blink_set() function should choose a user friendly blinking value
if it is called with *delay_on==0 && *delay_off==0 parameters. In this
case the driver should give back the chosen value through delay_on and
delay_off parameters to the leds subsystem.
Setting the brightness to zero with brightness_set() callback function
should completely turn off the LED and cancel the previously programmed

88
Documentation/leds/leds-lp5521.txt Normal file
View File

@ -0,0 +1,88 @@
Kernel driver for lp5521
========================
* National Semiconductor LP5521 led driver chip
* Datasheet: http://www.national.com/pf/LP/LP5521.html
Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
Description
-----------
LP5521 can drive up to 3 channels. Leds can be controlled directly via
the led class control interface. Channels have generic names:
lp5521:channelx, where x is 0 .. 2
All three channels can be also controlled using the engine micro programs.
More details of the instructions can be found from the public data sheet.
Control interface for the engines:
x is 1 .. 3
enginex_mode : disabled, load, run
enginex_load : store program (visible only in engine load mode)
Example (start to blink the channel 2 led):
cd /sys/class/leds/lp5521:channel2/device
echo "load" > engine3_mode
echo "037f4d0003ff6000" > engine3_load
echo "run" > engine3_mode
stop the engine:
echo "disabled" > engine3_mode
sysfs contains a selftest entry.
The test communicates with the chip and checks that
the clock mode is automatically set to the requested one.
Each channel has its own led current settings.
/sys/class/leds/lp5521:channel0/led_current - RW
/sys/class/leds/lp5521:channel0/max_current - RO
Format: 10x mA i.e 10 means 1.0 mA
example platform data:
Note: chan_nr can have values between 0 and 2.
static struct lp5521_led_config lp5521_led_config[] = {
{
.chan_nr = 0,
.led_current = 50,
.max_current = 130,
}, {
.chan_nr = 1,
.led_current = 0,
.max_current = 130,
}, {
.chan_nr = 2,
.led_current = 0,
.max_current = 130,
}
};
static int lp5521_setup(void)
{
/* setup HW resources */
}
static void lp5521_release(void)
{
/* Release HW resources */
}
static void lp5521_enable(bool state)
{
/* Control of chip enable signal */
}
static struct lp5521_platform_data lp5521_platform_data = {
.led_config = lp5521_led_config,
.num_channels = ARRAY_SIZE(lp5521_led_config),
.clock_mode = LP5521_CLOCK_EXT,
.setup_resources = lp5521_setup,
.release_resources = lp5521_release,
.enable = lp5521_enable,
};
If the current is set to 0 in the platform data, that channel is
disabled and it is not visible in the sysfs.

83
Documentation/leds/leds-lp5523.txt Normal file
View File

@ -0,0 +1,83 @@
Kernel driver for lp5523
========================
* National Semiconductor LP5523 led driver chip
* Datasheet: http://www.national.com/pf/LP/LP5523.html
Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
Description
-----------
LP5523 can drive up to 9 channels. Leds can be controlled directly via
the led class control interface. Channels have generic names:
lp5523:channelx where x is 0...8
The chip provides 3 engines. Each engine can control channels without
interaction from the main CPU. Details of the micro engine code can be found
from the public data sheet. Leds can be muxed to different channels.
Control interface for the engines:
x is 1 .. 3
enginex_mode : disabled, load, run
enginex_load : microcode load (visible only in load mode)
enginex_leds : led mux control (visible only in load mode)
cd /sys/class/leds/lp5523:channel2/device
echo "load" > engine3_mode
echo "9d80400004ff05ff437f0000" > engine3_load
echo "111111111" > engine3_leds
echo "run" > engine3_mode
sysfs contains a selftest entry. It measures each channel
voltage level and checks if it looks reasonable. If the level is too high,
the led is missing; if the level is too low, there is a short circuit.
Selftest uses always the current from the platform data.
Each channel contains led current settings.
/sys/class/leds/lp5523:channel2/led_current - RW
/sys/class/leds/lp5523:channel2/max_current - RO
Format: 10x mA i.e 10 means 1.0 mA
Example platform data:
Note - chan_nr can have values between 0 and 8.
static struct lp5523_led_config lp5523_led_config[] = {
{
.chan_nr = 0,
.led_current = 50,
.max_current = 130,
},
...
}, {
.chan_nr = 8,
.led_current = 50,
.max_current = 130,
}
};
static int lp5523_setup(void)
{
/* Setup HW resources */
}
static void lp5523_release(void)
{
/* Release HW resources */
}
static void lp5523_enable(bool state)
{
/* Control chip enable signal */
}
static struct lp5523_platform_data lp5523_platform_data = {
.led_config = lp5523_led_config,
.num_channels = ARRAY_SIZE(lp5523_led_config),
.clock_mode = LP5523_CLOCK_EXT,
.setup_resources = lp5523_setup,
.release_resources = lp5523_release,
.enable = lp5523_enable,
};

9
Documentation/networking/ip-sysctl.txt
View File

@ -20,6 +20,15 @@ ip_no_pmtu_disc - BOOLEAN
min_pmtu - INTEGER
default 562 - minimum discovered Path MTU
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
this when using large numbers of interfaces and/or routes.
neigh/default/gc_thresh3 - INTEGER
Maximum number of neighbor entries allowed. Increase this
when using large numbers of interfaces and when communicating
with large numbers of directly-connected peers.
mtu_expires - INTEGER
Time, in seconds, that cached PMTU information is kept.

4
Documentation/rbtree.txt
View File

@ -21,8 +21,8 @@ three rotations, respectively, to balance the tree), with slightly slower
To quote Linux Weekly News:
There are a number of red-black trees in use in the kernel.
The anticipatory, deadline, and CFQ I/O schedulers all employ
rbtrees to track requests; the packet CD/DVD driver does the same.
The deadline and CFQ I/O schedulers employ rbtrees to
track requests; the packet CD/DVD driver does the same.
The high-resolution timer code uses an rbtree to organize outstanding
timer requests. The ext3 filesystem tracks directory entries in a
red-black tree. Virtual memory areas (VMAs) are tracked with red-black

14
Documentation/sysctl/kernel.txt
View File

@ -28,6 +28,7 @@ show up in /proc/sys/kernel:
- core_uses_pid
- ctrl-alt-del
- dentry-state
- dmesg_restrict
- domainname
- hostname
- hotplug
@ -213,6 +214,19 @@ to decide what to do with it.
==============================================================
dmesg_restrict:
This toggle indicates whether unprivileged users are prevented from using
dmesg(8) to view messages from the kernel's log buffer. When
dmesg_restrict is set to (0) there are no restrictions. When
dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use
dmesg(8).
The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default
value of dmesg_restrict.
==============================================================
domainname & hostname:
These files can be used to set the NIS/YP domainname and the

14
MAINTAINERS
View File

@ -161,7 +161,7 @@ M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
S: Maintained
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
F: drivers/serial/8250*
F: include/linux/serial_8250.h
@ -5676,7 +5676,7 @@ S: Maintained
STAGING SUBSYSTEM
M: Greg Kroah-Hartman <gregkh@suse.de>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6.git
L: devel@driverdev.osuosl.org
S: Maintained
F: drivers/staging/
@ -5910,7 +5910,7 @@ S: Maintained
TTY LAYER
M: Greg Kroah-Hartman <gregkh@suse.de>
S: Maintained
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
F: drivers/char/tty_*
F: drivers/serial/serial_core.c
F: include/linux/serial_core.h
@ -6233,7 +6233,7 @@ USB SUBSYSTEM
M: Greg Kroah-Hartman <gregkh@suse.de>
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
S: Supported
F: Documentation/usb/
F: drivers/net/usb/
@ -6598,14 +6598,14 @@ F: drivers/platform/x86
XEN PCI SUBSYSTEM
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
L: xen-devel@lists.xensource.com
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
S: Supported
F: arch/x86/pci/*xen*
F: drivers/pci/*xen*
XEN SWIOTLB SUBSYSTEM
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
L: xen-devel@lists.xensource.com
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
S: Supported
F: arch/x86/xen/*swiotlb*
F: drivers/xen/*swiotlb*
@ -6613,7 +6613,7 @@ F: drivers/xen/*swiotlb*
XEN HYPERVISOR INTERFACE
M: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
M: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
L: xen-devel@lists.xen.org
L: xen-devel@lists.xensource.com (moderated for non-subscribers)
L: virtualization@lists.osdl.org
S: Supported
F: arch/x86/xen/

2
arch/arm/Kconfig
View File

@ -6,7 +6,7 @@ config ARM
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
select GENERIC_ATOMIC64 if (!CPU_32v6K)
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL)

28
arch/arm/common/gic.c
View File

@ -251,15 +251,16 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all interrupts.
* Set priority on all global interrupts.
*/
for (i = 0; i < max_irq; i += 4)
for (i = 32; i < max_irq; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts.
* Disable all interrupts. Leave the PPI and SGIs alone
* as these enables are banked registers.
*/
for (i = 0; i < max_irq; i += 32)
for (i = 32; i < max_irq; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
/*
@ -277,11 +278,30 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
{
void __iomem *dist_base;
int i;
if (gic_nr >= MAX_GIC_NR)
BUG();
dist_base = gic_data[gic_nr].dist_base;
BUG_ON(!dist_base);
gic_data[gic_nr].cpu_base = base;
/*
* Deal with the banked PPI and SGI interrupts - disable all
* PPI interrupts, ensure all SGI interrupts are enabled.
*/
writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
/*
* Set priority on PPI and SGI interrupts
*/
for (i = 0; i < 32; i += 4)
writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
writel(0xf0, base + GIC_CPU_PRIMASK);
writel(1, base + GIC_CPU_CTRL);
}

2
arch/arm/include/asm/hardware/it8152.h
View File

@ -75,7 +75,7 @@ extern unsigned long it8152_base_address;
IT8152_PD_IRQ(1) USB (USBR)
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
#define IT8152_IRQ(x) (IRQ_BOARD_END + (x))
#define IT8152_IRQ(x) (IRQ_BOARD_START + (x))
/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
#define IT8152_LD_IRQ_COUNT 9

3
arch/arm/kernel/hw_breakpoint.c
View File

@ -748,8 +748,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
breakpoint_handler(addr, regs);
break;
case ARM_ENTRY_ASYNC_WATCHPOINT:
WARN_ON("Asynchronous watchpoint exception taken. "
"Debugging results may be unreliable");
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
case ARM_ENTRY_SYNC_WATCHPOINT:
watchpoint_handler(addr, regs);
break;

2
arch/arm/kernel/perf_event.c
View File

@ -1749,7 +1749,7 @@ static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
enum armv7_counters counter)
{
int ret;
int ret = 0;
if (counter == ARMV7_CYCLE_COUNTER)
ret = pmnc & ARMV7_FLAG_C;

2
arch/arm/kernel/stacktrace.c
View File

@ -28,7 +28,7 @@ int notrace unwind_frame(struct stackframe *frame)
/* only go to a higher address on the stack */
low = frame->sp;
high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
high = ALIGN(low, THREAD_SIZE);
/* check current frame pointer is within bounds */
if (fp < (low + 12) || fp + 4 >= high)

5
arch/arm/kernel/traps.c
View File

@ -53,10 +53,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long);
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
sprint_symbol(sym1, where);
sprint_symbol(sym2, from);
printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
#else
printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
#endif

2
arch/arm/kernel/unwind.c
View File

@ -279,7 +279,7 @@ int unwind_frame(struct stackframe *frame)
/* only go to a higher address on the stack */
low = frame->sp;
high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
high = ALIGN(low, THREAD_SIZE);
pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
frame->pc, frame->lr, frame->sp);

111
arch/arm/mach-ep93xx/include/mach/dma.h
View File

@ -1,5 +1,13 @@
/*
* arch/arm/mach-ep93xx/include/mach/dma.h
/**
* DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine
*
* The EP93xx DMA M2P subsystem handles DMA transfers between memory and
* peripherals. DMA M2P channels are available for audio, UARTs and IrDA.
* See chapter 10 of the EP93xx users guide for full details on the DMA M2P
* engine.
*
* See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code.
*
*/
#ifndef __ASM_ARCH_DMA_H
@ -8,12 +16,34 @@
#include <linux/list.h>
#include <linux/types.h>
/**
* struct ep93xx_dma_buffer - Information about a buffer to be transferred
* using the DMA M2P engine
*
* @list: Entry in DMA buffer list
* @bus_addr: Physical address of the buffer
* @size: Size of the buffer in bytes
*/
struct ep93xx_dma_buffer {
struct list_head list;
u32 bus_addr;
u16 size;
};
/**
* struct ep93xx_dma_m2p_client - Information about a DMA M2P client
*
* @name: Unique name for this client
* @flags: Client flags
* @cookie: User data to pass to callback functions
* @buffer_started: Non NULL function to call when a transfer is started.
* The arguments are the user data cookie and the DMA
* buffer which is starting.
* @buffer_finished: Non NULL function to call when a transfer is completed.
* The arguments are the user data cookie, the DMA buffer
* which has completed, and a boolean flag indicating if
* the transfer had an error.
*/
struct ep93xx_dma_m2p_client {
char *name;
u8 flags;
@ -24,10 +54,11 @@ struct ep93xx_dma_m2p_client {
struct ep93xx_dma_buffer *buf,
int bytes, int error);
/* Internal to the DMA code. */
/* private: Internal use only */
void *channel;
};
/* DMA M2P ports */
#define EP93XX_DMA_M2P_PORT_I2S1 0x00
#define EP93XX_DMA_M2P_PORT_I2S2 0x01
#define EP93XX_DMA_M2P_PORT_AAC1 0x02
@ -39,18 +70,80 @@ struct ep93xx_dma_m2p_client {
#define EP93XX_DMA_M2P_PORT_UART3 0x08
#define EP93XX_DMA_M2P_PORT_IRDA 0x09
#define EP93XX_DMA_M2P_PORT_MASK 0x0f
#define EP93XX_DMA_M2P_TX 0x00
#define EP93XX_DMA_M2P_RX 0x10
#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20
#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40
#define EP93XX_DMA_M2P_ERROR_MASK 0x60
int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
/* DMA M2P client flags */
#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */
#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */
/*
* DMA M2P client error handling flags. See the EP93xx users guide
* documentation on the DMA M2P CONTROL register for more details
*/
#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */
#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */
#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */
/**
* ep93xx_dma_m2p_client_register - Register a client with the DMA M2P
* subsystem
*
* @m2p: Client information to register
* returns 0 on success
*
* The DMA M2P subsystem allocates a channel and an interrupt line for the DMA
* client
*/
int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
/**
* ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P
* subsystem
*
* @m2p: Client to unregister
*
* Any transfers currently in progress will be completed in hardware, but
* ignored in software.
*/
void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
/**
* ep93xx_dma_m2p_submit - Submit a DMA M2P transfer
*
* @m2p: DMA Client to submit the transfer on
* @buf: DMA Buffer to submit
*
* If the current or next transfer positions are free on the M2P client then
* the transfer is started immediately. If not, the transfer is added to the
* list of pending transfers. This function must not be called from the
* buffer_finished callback for an M2P channel.
*
*/
void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
struct ep93xx_dma_buffer *buf);
/**
* ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list
* for an M2P channel
*
* @m2p: DMA Client to submit the transfer on
* @buf: DMA Buffer to submit
*
* This function must only be called from the buffer_finished callback for an
* M2P channel. It is commonly used to add the next transfer in a chained list
* of DMA transfers.
*/
void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
struct ep93xx_dma_buffer *buf);
/**
* ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client
*
* @m2p: DMA client to flush transfers on
*
* Any transfers currently in progress will be completed in hardware, but
* ignored in software.
*
*/
void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
#endif /* __ASM_ARCH_DMA_H */

7
arch/arm/mach-kirkwood/common.c
View File

@ -854,10 +854,9 @@ int __init kirkwood_find_tclk(void)
kirkwood_pcie_id(&dev, &rev);
if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
rev == MV88F6281_REV_A1)) ||
(dev == MV88F6282_DEV_ID))
return 200000000;
if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
return 200000000;
return 166666667;
}

2
arch/arm/mach-kirkwood/d2net_v2-setup.c
View File

@ -225,5 +225,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END

14
arch/arm/mach-kirkwood/lacie_v2-common.c
View File

@ -111,17 +111,3 @@ void __init lacie_v2_hdd_power_init(int hdd_num)
pr_err("Failed to power up HDD%d\n", i + 1);
}
}
/*****************************************************************************
* Timer
****************************************************************************/
static void lacie_v2_timer_init(void)
{
kirkwood_tclk = 166666667;
orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
}
struct sys_timer lacie_v2_timer = {
.init = lacie_v2_timer_init,
};

2
arch/arm/mach-kirkwood/lacie_v2-common.h
View File

@ -13,6 +13,4 @@ void lacie_v2_register_flash(void);
void lacie_v2_register_i2c_devices(void);
void lacie_v2_hdd_power_init(int hdd_num);
extern struct sys_timer lacie_v2_timer;
#endif

4
arch/arm/mach-kirkwood/mpp.c
View File

@ -59,7 +59,7 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
}
printk("\n");
while (*mpp_list) {
for ( ; *mpp_list; mpp_list++) {
unsigned int num = MPP_NUM(*mpp_list);
unsigned int sel = MPP_SEL(*mpp_list);
int shift, gpio_mode;
@ -88,8 +88,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
if (sel != 0)
gpio_mode = 0;
orion_gpio_set_valid(num, gpio_mode);
mpp_list++;
}
printk(KERN_DEBUG " final MPP regs:");

6
arch/arm/mach-kirkwood/netspace_v2-setup.c
View File

@ -262,7 +262,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END
#endif
@ -272,7 +272,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END
#endif
@ -282,6 +282,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END
#endif

4
arch/arm/mach-kirkwood/netxbig_v2-setup.c
View File

@ -403,7 +403,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END
#endif
@ -413,6 +413,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_irq = kirkwood_init_irq,
.timer = &lacie_v2_timer,
.timer = &kirkwood_timer,
MACHINE_END
#endif

14
arch/arm/mach-kirkwood/ts41x-setup.c
View File

@ -27,6 +27,10 @@
#include "mpp.h"
#include "tsx1x-common.h"
/* for the PCIe reset workaround */
#include <plat/pcie.h>
#define QNAP_TS41X_JUMPER_JP1 45
static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void)
static int __init ts41x_pci_init(void)
{
if (machine_is_ts41x())
if (machine_is_ts41x()) {
/*
* Without this explicit reset, the PCIe SATA controller
* (Marvell 88sx7042/sata_mv) is known to stop working
* after a few minutes.
*/
orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
kirkwood_pcie_init(KW_PCIE0);
}
return 0;
}

3
arch/arm/mach-mmp/include/mach/cputype.h
View File

@ -46,7 +46,8 @@ static inline int cpu_is_pxa910(void)
#ifdef CONFIG_CPU_MMP2
static inline int cpu_is_mmp2(void)
{
return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
}
#else
#define cpu_is_mmp2() (0)
#endif

4
arch/arm/mach-mv78xx0/mpp.c
View File

@ -54,7 +54,7 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
}
printk("\n");
while (*mpp_list) {
for ( ; *mpp_list; mpp_list++) {
unsigned int num = MPP_NUM(*mpp_list);
unsigned int sel = MPP_SEL(*mpp_list);
int shift, gpio_mode;
@ -83,8 +83,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
if (sel != 0)
gpio_mode = 0;
orion_gpio_set_valid(num, gpio_mode);
mpp_list++;
}
printk(KERN_DEBUG " final MPP regs:");

4
arch/arm/mach-orion5x/mpp.c
View File

@ -127,7 +127,7 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
/* Initialize gpiolib. */
orion_gpio_init();
while (mode->mpp >= 0) {
for ( ; mode->mpp >= 0; mode++) {
u32 *reg;
int num_type;
int shift;
@ -160,8 +160,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
orion_gpio_set_unused(mode->mpp);
orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
mode++;
}
writel(mpp_0_7_ctrl, MPP_0_7_CTRL);

2
arch/arm/mach-orion5x/ts78xx-setup.c
View File

@ -239,7 +239,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = {
static struct resource ts78xx_ts_nand_resources = {
.start = TS_NAND_DATA,
.end = TS_NAND_DATA + 4,
.flags = IORESOURCE_IO,
.flags = IORESOURCE_MEM,
};
static struct platform_device ts78xx_ts_nand_device = {

2
arch/arm/mach-pxa/cm-x2xx.c
View File

@ -476,8 +476,6 @@ static void __init cmx2xx_init(void)
static void __init cmx2xx_init_irq(void)
{
pxa27x_init_irq();
if (cpu_is_pxa25x()) {
pxa25x_init_irq();
cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);

2
arch/arm/mach-pxa/saar.c
View File

@ -116,7 +116,7 @@ static struct platform_device smc91x_device = {
},
};
#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static uint16_t lcd_power_on[] = {
/* single frame */
SMART_CMD_NOOP,

2
arch/arm/mach-vexpress/ct-ca9x4.c
View File

@ -54,7 +54,9 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = {
static void __init ct_ca9x4_map_io(void)
{
#ifdef CONFIG_LOCAL_TIMERS
twd_base = MMIO_P2V(A9_MPCORE_TWD);
#endif
v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
}

2
arch/arm/mm/dma-mapping.c
View File

@ -198,7 +198,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
* fragmentation of the DMA space, and also prevents allocations
* smaller than a section from crossing a section boundary.
*/
bit = fls(size - 1) + 1;
bit = fls(size - 1);
if (bit > SECTION_SHIFT)
bit = SECTION_SHIFT;
align = 1 << bit;

4
arch/arm/plat-omap/devices.c
View File

@ -284,12 +284,14 @@ void __init omap_dsp_reserve_sdram_memblock(void)
if (!size)
return;
paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
paddr = memblock_alloc(size, SZ_1M);
if (!paddr) {
pr_err("%s: failed to reserve %x bytes\n",
__func__, size);
return;
}
memblock_free(paddr, size);
memblock_remove(paddr, size);
omap_dsp_phys_mempool_base = paddr;
}

3
arch/arm/plat-orion/include/plat/pcie.h
View File

@ -11,12 +11,15 @@
#ifndef __PLAT_PCIE_H
#define __PLAT_PCIE_H
struct pci_bus;
u32 orion_pcie_dev_id(void __iomem *base);
u32 orion_pcie_rev(void __iomem *base);
int orion_pcie_link_up(void __iomem *base);
int orion_pcie_x4_mode(void __iomem *base);
int orion_pcie_get_local_bus_nr(void __iomem *base);
void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
void orion_pcie_reset(void __iomem *base);
void orion_pcie_setup(void __iomem *base,
struct mbus_dram_target_info *dram);
int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,

5
arch/arm/plat-orion/pcie.c
View File

@ -181,11 +181,6 @@ void __init orion_pcie_setup(void __iomem *base,
u16 cmd;
u32 mask;
/*
* soft reset PCIe unit
*/
orion_pcie_reset(base);
/*
* Point PCIe unit MBUS decode windows to DRAM space.
*/

4
arch/um/include/asm/ptrace-generic.h
View File

@ -38,8 +38,8 @@ struct pt_regs {
struct task_struct;
extern long subarch_ptrace(struct task_struct *child, long request, long addr,
long data);
extern long subarch_ptrace(struct task_struct *child, long request,
unsigned long addr, unsigned long data);
extern unsigned long getreg(struct task_struct *child, int regno);
extern int putreg(struct task_struct *child, int regno, unsigned long value);
extern int get_fpregs(struct user_i387_struct __user *buf,

2
arch/um/kernel/ptrace.c
View File

@ -122,7 +122,7 @@ long arch_ptrace(struct task_struct *child, long request,
break;
case PTRACE_SET_THREAD_AREA:
ret = ptrace_set_thread_area(child, addr, datavp);
ret = ptrace_set_thread_area(child, addr, vp);
break;
case PTRACE_FAULTINFO: {

10
arch/x86/include/asm/apic.h
View File

@ -141,13 +141,13 @@ static inline void native_apic_msr_write(u32 reg, u32 v)
static inline u32 native_apic_msr_read(u32 reg)
{
u32 low, high;
u64 msr;
if (reg == APIC_DFR)
return -1;
rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
return low;
rdmsrl(APIC_BASE_MSR + (reg >> 4), msr);
return (u32)msr;
}
static inline void native_x2apic_wait_icr_idle(void)
@ -181,12 +181,12 @@ extern void enable_x2apic(void);
extern void x2apic_icr_write(u32 low, u32 id);
static inline int x2apic_enabled(void)
{
int msr, msr2;
u64 msr;
if (!cpu_has_x2apic)
return 0;
rdmsr(MSR_IA32_APICBASE, msr, msr2);
rdmsrl(MSR_IA32_APICBASE, msr);
if (msr & X2APIC_ENABLE)
return 1;
return 0;

189
arch/x86/include/asm/uv/uv_mmrs.h
View File

@ -805,6 +805,78 @@ union uvh_node_present_table_u {
} s;
};
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR */
/* ========================================================================= */
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_SHFT 24
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_MASK 0x00000000ff000000UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_SHFT 48
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_MASK 0x001f000000000000UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_SHFT 63
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_MASK 0x8000000000000000UL
union uvh_rh_gam_alias210_overlay_config_0_mmr_u {
unsigned long v;
struct uvh_rh_gam_alias210_overlay_config_0_mmr_s {
unsigned long rsvd_0_23: 24; /* */
unsigned long base : 8; /* RW */
unsigned long rsvd_32_47: 16; /* */
unsigned long m_alias : 5; /* RW */
unsigned long rsvd_53_62: 10; /* */
unsigned long enable : 1; /* RW */
} s;
};
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR */
/* ========================================================================= */
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_SHFT 24
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_MASK 0x00000000ff000000UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_SHFT 48
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_MASK 0x001f000000000000UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_SHFT 63
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_MASK 0x8000000000000000UL
union uvh_rh_gam_alias210_overlay_config_1_mmr_u {
unsigned long v;
struct uvh_rh_gam_alias210_overlay_config_1_mmr_s {
unsigned long rsvd_0_23: 24; /* */
unsigned long base : 8; /* RW */
unsigned long rsvd_32_47: 16; /* */
unsigned long m_alias : 5; /* RW */
unsigned long rsvd_53_62: 10; /* */
unsigned long enable : 1; /* RW */
} s;
};
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR */
/* ========================================================================= */
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_SHFT 24
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_MASK 0x00000000ff000000UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_SHFT 48
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_MASK 0x001f000000000000UL
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_SHFT 63
#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_MASK 0x8000000000000000UL
union uvh_rh_gam_alias210_overlay_config_2_mmr_u {
unsigned long v;
struct uvh_rh_gam_alias210_overlay_config_2_mmr_s {
unsigned long rsvd_0_23: 24; /* */
unsigned long base : 8; /* RW */
unsigned long rsvd_32_47: 16; /* */
unsigned long m_alias : 5; /* RW */
unsigned long rsvd_53_62: 10; /* */
unsigned long enable : 1; /* RW */
} s;
};
/* ========================================================================= */
/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */
/* ========================================================================= */
@ -856,6 +928,29 @@ union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
} s;
};
/* ========================================================================= */
/* UVH_RH_GAM_CONFIG_MMR */
/* ========================================================================= */
#define UVH_RH_GAM_CONFIG_MMR 0x1600000UL
#define UVH_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0
#define UVH_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL
#define UVH_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6
#define UVH_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL
#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_SHFT 12
#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK 0x0000000000001000UL
union uvh_rh_gam_config_mmr_u {
unsigned long v;
struct uvh_rh_gam_config_mmr_s {
unsigned long m_skt : 6; /* RW */
unsigned long n_skt : 4; /* RW */
unsigned long rsvd_10_11: 2; /* */
unsigned long mmiol_cfg : 1; /* RW */
unsigned long rsvd_13_63: 51; /* */
} s;
};
/* ========================================================================= */
/* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */
/* ========================================================================= */
@ -987,97 +1082,5 @@ union uvh_rtc1_int_config_u {
} s;
};
/* ========================================================================= */
/* UVH_SI_ADDR_MAP_CONFIG */
/* ========================================================================= */
#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
union uvh_si_addr_map_config_u {
unsigned long v;
struct uvh_si_addr_map_config_s {
unsigned long m_skt : 6; /* RW */
unsigned long rsvd_6_7: 2; /* */
unsigned long n_skt : 4; /* RW */
unsigned long rsvd_12_63: 52; /* */
} s;
};
/* ========================================================================= */
/* UVH_SI_ALIAS0_OVERLAY_CONFIG */
/* ========================================================================= */
#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
union uvh_si_alias0_overlay_config_u {
unsigned long v;
struct uvh_si_alias0_overlay_config_s {
unsigned long rsvd_0_23: 24; /* */
unsigned long base : 8; /* RW */
unsigned long rsvd_32_47: 16; /* */
unsigned long m_alias : 5; /* RW */
unsigned long rsvd_53_62: 10; /* */
unsigned long enable : 1; /* RW */
} s;
};
/* ========================================================================= */
/* UVH_SI_ALIAS1_OVERLAY_CONFIG */
/* ========================================================================= */
#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
union uvh_si_alias1_overlay_config_u {
unsigned long v;
struct uvh_si_alias1_overlay_config_s {
unsigned long rsvd_0_23: 24; /* */
unsigned long base : 8; /* RW */
unsigned long rsvd_32_47: 16; /* */
unsigned long m_alias : 5; /* RW */
unsigned long rsvd_53_62: 10; /* */
unsigned long enable : 1; /* RW */
} s;
};
/* ========================================================================= */
/* UVH_SI_ALIAS2_OVERLAY_CONFIG */
/* ========================================================================= */
#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
union uvh_si_alias2_overlay_config_u {
unsigned long v;
struct uvh_si_alias2_overlay_config_s {
unsigned long rsvd_0_23: 24; /* */
unsigned long base : 8; /* RW */
unsigned long rsvd_32_47: 16; /* */
unsigned long m_alias : 5; /* RW */
unsigned long rsvd_53_62: 10; /* */
unsigned long enable : 1; /* RW */
} s;
};
#endif /* _ASM_X86_UV_UV_MMRS_H */
#endif /* __ASM_UV_MMRS_X86_H__ */

1
arch/x86/kernel/apic/apic.c
View File

@ -52,7 +52,6 @@
#include <asm/mce.h>
#include <asm/kvm_para.h>
#include <asm/tsc.h>
#include <asm/atomic.h>
unsigned int num_processors;

12
arch/x86/kernel/apic/x2apic_uv_x.c
View File

@ -379,14 +379,14 @@ struct redir_addr {
#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
static __initdata struct redir_addr redir_addrs[] = {
{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR},
{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR},
{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR},
};
static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
{
union uvh_si_alias0_overlay_config_u alias;
union uvh_rh_gam_alias210_overlay_config_2_mmr_u alias;
union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
int i;
@ -660,7 +660,7 @@ void uv_nmi_init(void)
void __init uv_system_init(void)
{
union uvh_si_addr_map_config_u m_n_config;
union uvh_rh_gam_config_mmr_u m_n_config;
union uvh_node_id_u node_id;
unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
@ -670,7 +670,7 @@ void __init uv_system_init(void)
map_low_mmrs();
m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
m_val = m_n_config.s.m_skt;
n_val = m_n_config.s.n_skt;
mmr_base =

4
arch/x86/kernel/cpu/perf_event_amd.c
View File

@ -280,11 +280,11 @@ static struct amd_nb *amd_alloc_nb(int cpu, int nb_id)
struct amd_nb *nb;
int i;
nb = kmalloc(sizeof(struct amd_nb), GFP_KERNEL);
nb = kmalloc_node(sizeof(struct amd_nb), GFP_KERNEL | __GFP_ZERO,
cpu_to_node(cpu));
if (!nb)
return NULL;
memset(nb, 0, sizeof(*nb));
nb->nb_id = nb_id;
/*

2
arch/x86/kernel/microcode_amd.c
View File

@ -212,7 +212,7 @@ static int install_equiv_cpu_table(const u8 *buf)
return 0;
}
equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
equiv_cpu_table = vmalloc(size);
if (!equiv_cpu_table) {
pr_err("failed to allocate equivalent CPU table\n");
return 0;

7
arch/x86/kernel/mmconf-fam10h_64.c
View File

@ -217,13 +217,13 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
wrmsrl(address, val);
}
static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d)
static int __init set_check_enable_amd_mmconf(const struct dmi_system_id *d)
{
pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
return 0;
}
static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
static const struct dmi_system_id __initconst mmconf_dmi_table[] = {
{
.callback = set_check_enable_amd_mmconf,
.ident = "Sun Microsystems Machine",
@ -234,7 +234,8 @@ static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
{}
};
void __cpuinit check_enable_amd_mmconf_dmi(void)
/* Called from a __cpuinit function, but only on the BSP. */
void __ref check_enable_amd_mmconf_dmi(void)
{
dmi_check_system(mmconf_dmi_table);
}

38
arch/x86/kernel/pvclock.c
View File

@ -41,44 +41,6 @@ void pvclock_set_flags(u8 flags)
valid_flags = flags;
}
/*
* Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
* yielding a 64-bit result.
*/
static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
{
u64 product;
#ifdef __i386__
u32 tmp1, tmp2;
#endif
if (shift < 0)
delta >>= -shift;
else
delta <<= shift;
#ifdef __i386__
__asm__ (
"mul %5 ; "
"mov %4,%%eax ; "
"mov %%edx,%4 ; "
"mul %5 ; "
"xor %5,%5 ; "
"add %4,%%eax ; "
"adc %5,%%edx ; "
: "=A" (product), "=r" (tmp1), "=r" (tmp2)
: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
#elif defined(__x86_64__)
__asm__ (
"mul %%rdx ; shrd $32,%%rdx,%%rax"
: "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
#else
#error implement me!
#endif
return product;
}
static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow)
{
u64 delta = native_read_tsc() - shadow->tsc_timestamp;

2
arch/x86/mm/tlb.c
View File

@ -251,7 +251,7 @@ static void __cpuinit calculate_tlb_offset(void)
}
}
static int tlb_cpuhp_notify(struct notifier_block *n,
static int __cpuinit tlb_cpuhp_notify(struct notifier_block *n,
unsigned long action, void *hcpu)
{
switch (action & 0xf) {

8
arch/x86/pci/xen.c
View File

@ -147,8 +147,10 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
irq = xen_allocate_pirq(v[i], 0, /* not sharable */
(type == PCI_CAP_ID_MSIX) ?
"pcifront-msi-x" : "pcifront-msi");
if (irq < 0)
return -1;
if (irq < 0) {
ret = -1;
goto free;
}
ret = set_irq_msi(irq, msidesc);
if (ret)
@ -164,7 +166,7 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
if (ret == -ENODEV)
dev_err(&dev->dev, "Xen PCI frontend has not registered" \
" MSI/MSI-X support!\n");
free:
kfree(v);
return ret;
}

13
arch/x86/platform/uv/tlb_uv.c
View File

@ -1343,8 +1343,8 @@ uv_activation_descriptor_init(int node, int pnode)
* each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR)
* per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub
*/
bau_desc = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)*
UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE
* UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
BUG_ON(!bau_desc);
pa = uv_gpa(bau_desc); /* need the real nasid*/
@ -1402,9 +1402,9 @@ uv_payload_queue_init(int node, int pnode)
struct bau_payload_queue_entry *pqp_malloc;
struct bau_control *bcp;
pqp = (struct bau_payload_queue_entry *) kmalloc_node(
(DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry),
GFP_KERNEL, node);
pqp = kmalloc_node((DEST_Q_SIZE + 1)
* sizeof(struct bau_payload_queue_entry),
GFP_KERNEL, node);
BUG_ON(!pqp);
pqp_malloc = pqp;
@ -1520,8 +1520,7 @@ static void __init uv_init_per_cpu(int nuvhubs)
timeout_us = calculate_destination_timeout();
uvhub_descs = (struct uvhub_desc *)
kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
uvhub_descs = kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc));
uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL);
for_each_present_cpu(cpu) {

2
arch/x86/xen/mmu.c
View File

@ -2126,7 +2126,7 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
{
pmd_t *kernel_pmd;
level2_kernel_pgt = extend_brk(sizeof(pmd_t *) * PTRS_PER_PMD, PAGE_SIZE);
level2_kernel_pgt = extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
xen_start_info->nr_pt_frames * PAGE_SIZE +

18
arch/x86/xen/setup.c
View File

@ -118,16 +118,18 @@ static unsigned long __init xen_return_unused_memory(unsigned long max_pfn,
const struct e820map *e820)
{
phys_addr_t max_addr = PFN_PHYS(max_pfn);
phys_addr_t last_end = 0;
phys_addr_t last_end = ISA_END_ADDRESS;
unsigned long released = 0;
int i;
/* Free any unused memory above the low 1Mbyte. */
for (i = 0; i < e820->nr_map && last_end < max_addr; i++) {
phys_addr_t end = e820->map[i].addr;
end = min(max_addr, end);
released += xen_release_chunk(last_end, end);
last_end = e820->map[i].addr + e820->map[i].size;
if (last_end < end)
released += xen_release_chunk(last_end, end);
last_end = max(last_end, e820->map[i].addr + e820->map[i].size);
}
if (last_end < max_addr)
@ -164,6 +166,7 @@ char * __init xen_memory_setup(void)
XENMEM_memory_map;
rc = HYPERVISOR_memory_op(op, &memmap);
if (rc == -ENOSYS) {
BUG_ON(xen_initial_domain());
memmap.nr_entries = 1;
map[0].addr = 0ULL;
map[0].size = mem_end;
@ -201,12 +204,13 @@ char * __init xen_memory_setup(void)
}
/*
* Even though this is normal, usable memory under Xen, reserve
* ISA memory anyway because too many things think they can poke
* In domU, the ISA region is normal, usable memory, but we
* reserve ISA memory anyway because too many things poke
* about in there.
*
* In a dom0 kernel, this region is identity mapped with the
* hardware ISA area, so it really is out of bounds.
* In Dom0, the host E820 information can leave gaps in the
* ISA range, which would cause us to release those pages. To
* avoid this, we unconditionally reserve them here.
*/
e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
E820_RESERVED);

11
block/blk-core.c
View File

@ -1194,13 +1194,6 @@ static int __make_request(struct request_queue *q, struct bio *bio)
int where = ELEVATOR_INSERT_SORT;
int rw_flags;
/* REQ_HARDBARRIER is no more */
if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER,
"block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) {
bio_endio(bio, -EOPNOTSUPP);
return 0;
}
/*
* low level driver can indicate that it wants pages above a
* certain limit bounced to low memory (ie for highmem, or even
@ -1351,7 +1344,7 @@ static void handle_bad_sector(struct bio *bio)
bdevname(bio->bi_bdev, b),
bio->bi_rw,
(unsigned long long)bio->bi_sector + bio_sectors(bio),
(long long)(bio->bi_bdev->bd_inode->i_size >> 9));
(long long)(i_size_read(bio->bi_bdev->bd_inode) >> 9));
set_bit(BIO_EOF, &bio->bi_flags);
}
@ -1404,7 +1397,7 @@ static inline int bio_check_eod(struct bio *bio, unsigned int nr_sectors)
return 0;
/* Test device or partition size, when known. */
maxsector = bio->bi_bdev->bd_inode->i_size >> 9;
maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9;
if (maxsector) {
sector_t sector = bio->bi_sector;

14
block/blk-ioc.c
View File

@ -153,20 +153,6 @@ struct io_context *get_io_context(gfp_t gfp_flags, int node)
}
EXPORT_SYMBOL(get_io_context);
void copy_io_context(struct io_context **pdst, struct io_context **psrc)
{
struct io_context *src = *psrc;
struct io_context *dst = *pdst;
if (src) {
BUG_ON(atomic_long_read(&src->refcount) == 0);
atomic_long_inc(&src->refcount);
put_io_context(dst);
*pdst = src;
}
}
EXPORT_SYMBOL(copy_io_context);
static int __init blk_ioc_init(void)
{
iocontext_cachep = kmem_cache_create("blkdev_ioc",

2
block/blk-map.c
View File

@ -205,6 +205,8 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
unaligned = 1;
break;
}
if (!iov[i].iov_len)
return -EINVAL;
}
if (unaligned || (q->dma_pad_mask & len) || map_data)

4
block/compat_ioctl.c
View File

@ -744,13 +744,13 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
bdi->ra_pages = (arg * 512) / PAGE_CACHE_SIZE;
return 0;
case BLKGETSIZE:
size = bdev->bd_inode->i_size;
size = i_size_read(bdev->bd_inode);
if ((size >> 9) > ~0UL)
return -EFBIG;
return compat_put_ulong(arg, size >> 9);
case BLKGETSIZE64_32:
return compat_put_u64(arg, bdev->bd_inode->i_size);
return compat_put_u64(arg, i_size_read(bdev->bd_inode));
case BLKTRACESETUP32:
case BLKTRACESTART: /* compatible */

4
block/elevator.c
View File

@ -429,7 +429,7 @@ void elv_dispatch_sort(struct request_queue *q, struct request *rq)
q->nr_sorted--;
boundary = q->end_sector;
stop_flags = REQ_SOFTBARRIER | REQ_HARDBARRIER | REQ_STARTED;
stop_flags = REQ_SOFTBARRIER | REQ_STARTED;
list_for_each_prev(entry, &q->queue_head) {
struct request *pos = list_entry_rq(entry);
@ -691,7 +691,7 @@ void elv_insert(struct request_queue *q, struct request *rq, int where)
void __elv_add_request(struct request_queue *q, struct request *rq, int where,
int plug)
{
if (rq->cmd_flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
if (rq->cmd_flags & REQ_SOFTBARRIER) {
/* barriers are scheduling boundary, update end_sector */
if (rq->cmd_type == REQ_TYPE_FS ||
(rq->cmd_flags & REQ_DISCARD)) {

7
block/ioctl.c
View File

@ -125,7 +125,7 @@ static int blk_ioctl_discard(struct block_device *bdev, uint64_t start,
start >>= 9;
len >>= 9;
if (start + len > (bdev->bd_inode->i_size >> 9))
if (start + len > (i_size_read(bdev->bd_inode) >> 9))
return -EINVAL;
if (secure)
flags |= BLKDEV_DISCARD_SECURE;
@ -242,6 +242,7 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
* We need to set the startsect first, the driver may
* want to override it.
*/
memset(&geo, 0, sizeof(geo));
geo.start = get_start_sect(bdev);
ret = disk->fops->getgeo(bdev, &geo);
if (ret)
@ -307,12 +308,12 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
ret = blkdev_reread_part(bdev);
break;
case BLKGETSIZE:
size = bdev->bd_inode->i_size;
size = i_size_read(bdev->bd_inode);
if ((size >> 9) > ~0UL)
return -EFBIG;
return put_ulong(arg, size >> 9);
case BLKGETSIZE64:
return put_u64(arg, bdev->bd_inode->i_size);
return put_u64(arg, i_size_read(bdev->bd_inode));
case BLKTRACESTART:
case BLKTRACESTOP:
case BLKTRACESETUP:

34
block/scsi_ioctl.c
View File

@ -321,33 +321,47 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
if (hdr->iovec_count) {
const int size = sizeof(struct sg_iovec) * hdr->iovec_count;
size_t iov_data_len;
struct sg_iovec *iov;
struct sg_iovec *sg_iov;
struct iovec *iov;
int i;
iov = kmalloc(size, GFP_KERNEL);
if (!iov) {
sg_iov = kmalloc(size, GFP_KERNEL);
if (!sg_iov) {
ret = -ENOMEM;
goto out;
}
if (copy_from_user(iov, hdr->dxferp, size)) {
kfree(iov);
if (copy_from_user(sg_iov, hdr->dxferp, size)) {
kfree(sg_iov);
ret = -EFAULT;
goto out;
}
/*
* Sum up the vecs, making sure they don't overflow
*/
iov = (struct iovec *) sg_iov;
iov_data_len = 0;
for (i = 0; i < hdr->iovec_count; i++) {
if (iov_data_len + iov[i].iov_len < iov_data_len) {
kfree(sg_iov);
ret = -EINVAL;
goto out;
}
iov_data_len += iov[i].iov_len;
}
/* SG_IO howto says that the shorter of the two wins */
iov_data_len = iov_length((struct iovec *)iov,
hdr->iovec_count);
if (hdr->dxfer_len < iov_data_len) {
hdr->iovec_count = iov_shorten((struct iovec *)iov,
hdr->iovec_count = iov_shorten(iov,
hdr->iovec_count,
hdr->dxfer_len);
iov_data_len = hdr->dxfer_len;
}
ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count,
ret = blk_rq_map_user_iov(q, rq, NULL, sg_iov, hdr->iovec_count,
iov_data_len, GFP_KERNEL);
kfree(iov);
kfree(sg_iov);
} else if (hdr->dxfer_len)
ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
GFP_KERNEL);

1
crypto/pcrypt.c
View File

@ -504,7 +504,6 @@ static int pcrypt_init_padata(struct padata_pcrypt *pcrypt,
static void pcrypt_fini_padata(struct padata_pcrypt *pcrypt)
{
kobject_put(&pcrypt->pinst->kobj);
free_cpumask_var(pcrypt->cb_cpumask->mask);
kfree(pcrypt->cb_cpumask);

5
drivers/ata/libata-scsi.c
View File

@ -2552,8 +2552,11 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
*
* If door lock fails, always clear sdev->locked to
* avoid this infinite loop.
*
* This may happen before SCSI scan is complete. Make
* sure qc->dev->sdev isn't NULL before dereferencing.
*/
if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL)
if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev)
qc->dev->sdev->locked = 0;
qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;

2
drivers/ata/pata_legacy.c
View File

@ -142,7 +142,7 @@ static int autospeed; /* Chip present which snoops speed changes */
static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
#ifdef PATA_WINBOND_VLB_MODULE
#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
static int winbond = 1; /* Set to probe Winbond controllers,
give I/O port if non standard */
#else

2
drivers/ata/pata_octeon_cf.c
View File

@ -652,8 +652,6 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
struct octeon_cf_data *ocd;
ap = host->ports[i];
ocd = ap->dev->platform_data;
ocd = ap->dev->platform_data;
cf_port = ap->private_data;
dma_int.u64 =

3
drivers/block/aoe/aoeblk.c
View File

@ -180,9 +180,6 @@ aoeblk_make_request(struct request_queue *q, struct bio *bio)
BUG();
bio_endio(bio, -ENXIO);
return 0;
} else if (bio->bi_rw & REQ_HARDBARRIER) {
bio_endio(bio, -EOPNOTSUPP);
return 0;
} else if (bio->bi_io_vec == NULL) {
printk(KERN_ERR "aoe: bi_io_vec is NULL\n");
BUG();

131
drivers/block/cciss.c
View File

@ -113,6 +113,8 @@ static struct board_type products[] = {
{0x409D0E11, "Smart Array 6400 EM", &SA5_access},
{0x40910E11, "Smart Array 6i", &SA5_access},
{0x3225103C, "Smart Array P600", &SA5_access},
{0x3223103C, "Smart Array P800", &SA5_access},
{0x3234103C, "Smart Array P400", &SA5_access},
{0x3235103C, "Smart Array P400i", &SA5_access},
{0x3211103C, "Smart Array E200i", &SA5_access},
{0x3212103C, "Smart Array E200", &SA5_access},
@ -3753,7 +3755,7 @@ static void __devinit cciss_wait_for_mode_change_ack(ctlr_info_t *h)
for (i = 0; i < MAX_CONFIG_WAIT; i++) {
if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
break;
msleep(10);
usleep_range(10000, 20000);
}
}
@ -3937,10 +3939,9 @@ static int __devinit cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
*board_id = ((subsystem_device_id << 16) & 0xffff0000) |
subsystem_vendor_id;
for (i = 0; i < ARRAY_SIZE(products); i++) {
for (i = 0; i < ARRAY_SIZE(products); i++)
if (*board_id == products[i].board_id)
return i;
}
dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n",
*board_id);
return -ENODEV;
@ -3971,18 +3972,31 @@ static int __devinit cciss_pci_find_memory_BAR(struct pci_dev *pdev,
return -ENODEV;
}
static int __devinit cciss_wait_for_board_ready(ctlr_info_t *h)
static int __devinit cciss_wait_for_board_state(struct pci_dev *pdev,
void __iomem *vaddr, int wait_for_ready)
#define BOARD_READY 1
#define BOARD_NOT_READY 0
{
int i;
int i, iterations;
u32 scratchpad;
for (i = 0; i < CCISS_BOARD_READY_ITERATIONS; i++) {
scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
if (scratchpad == CCISS_FIRMWARE_READY)
return 0;
if (wait_for_ready)
iterations = CCISS_BOARD_READY_ITERATIONS;
else
iterations = CCISS_BOARD_NOT_READY_ITERATIONS;
for (i = 0; i < iterations; i++) {
scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET);
if (wait_for_ready) {
if (scratchpad == CCISS_FIRMWARE_READY)
return 0;
} else {
if (scratchpad != CCISS_FIRMWARE_READY)
return 0;
}
msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS);
}
dev_warn(&h->pdev->dev, "board not ready, timed out.\n");
dev_warn(&pdev->dev, "board not ready, timed out.\n");
return -ENODEV;
}
@ -4031,6 +4045,11 @@ static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
static void __devinit cciss_get_max_perf_mode_cmds(struct ctlr_info *h)
{
h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
/* Limit commands in memory limited kdump scenario. */
if (reset_devices && h->max_commands > 32)
h->max_commands = 32;
if (h->max_commands < 16) {
dev_warn(&h->pdev->dev, "Controller reports "
"max supported commands of %d, an obvious lie. "
@ -4148,7 +4167,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *h)
err = -ENOMEM;
goto err_out_free_res;
}
err = cciss_wait_for_board_ready(h);
err = cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
if (err)
goto err_out_free_res;
err = cciss_find_cfgtables(h);
@ -4313,36 +4332,6 @@ static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, u
#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
#define cciss_noop(p) cciss_message(p, 3, 0)
static __devinit int cciss_reset_msi(struct pci_dev *pdev)
{
/* the #defines are stolen from drivers/pci/msi.h. */
#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
int pos;
u16 control = 0;
pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
if (pos) {
pci_read_config_word(pdev, msi_control_reg(pos), &control);
if (control & PCI_MSI_FLAGS_ENABLE) {
dev_info(&pdev->dev, "resetting MSI\n");
pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
}
}
pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
if (pos) {
pci_read_config_word(pdev, msi_control_reg(pos), &control);
if (control & PCI_MSIX_FLAGS_ENABLE) {
dev_info(&pdev->dev, "resetting MSI-X\n");
pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
}
}
return 0;
}
static int cciss_controller_hard_reset(struct pci_dev *pdev,
void * __iomem vaddr, bool use_doorbell)
{
@ -4397,17 +4386,17 @@ static int cciss_controller_hard_reset(struct pci_dev *pdev,
* states or using the doorbell register. */
static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
{
u16 saved_config_space[32];
u64 cfg_offset;
u32 cfg_base_addr;
u64 cfg_base_addr_index;
void __iomem *vaddr;
unsigned long paddr;
u32 misc_fw_support, active_transport;
int rc, i;
int rc;
CfgTable_struct __iomem *cfgtable;
bool use_doorbell;
u32 board_id;
u16 command_register;
/* For controllers as old a the p600, this is very nearly
* the same thing as
@ -4417,14 +4406,6 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
* pci_set_power_state(pci_dev, PCI_D0);
* pci_restore_state(pci_dev);
*
* but we can't use these nice canned kernel routines on
* kexec, because they also check the MSI/MSI-X state in PCI
* configuration space and do the wrong thing when it is
* set/cleared. Also, the pci_save/restore_state functions
* violate the ordering requirements for restoring the
* configuration space from the CCISS document (see the
* comment below). So we roll our own ....
*
* For controllers newer than the P600, the pci power state
* method of resetting doesn't work so we have another way
* using the doorbell register.
@ -4443,8 +4424,13 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
return -ENODEV;
}
for (i = 0; i < 32; i++)
pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
/* Save the PCI command register */
pci_read_config_word(pdev, 4, &command_register);
/* Turn the board off. This is so that later pci_restore_state()
* won't turn the board on before the rest of config space is ready.
*/
pci_disable_device(pdev);
pci_save_state(pdev);
/* find the first memory BAR, so we can find the cfg table */
rc = cciss_pci_find_memory_BAR(pdev, &paddr);
@ -4479,26 +4465,32 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell);
if (rc)
goto unmap_cfgtable;
/* Restore the PCI configuration space. The Open CISS
* Specification says, "Restore the PCI Configuration
* Registers, offsets 00h through 60h. It is important to
* restore the command register, 16-bits at offset 04h,
* last. Do not restore the configuration status register,
* 16-bits at offset 06h." Note that the offset is 2*i.
*/
for (i = 0; i < 32; i++) {
if (i == 2 || i == 3)
continue;
pci_write_config_word(pdev, 2*i, saved_config_space[i]);
pci_restore_state(pdev);
rc = pci_enable_device(pdev);
if (rc) {
dev_warn(&pdev->dev, "failed to enable device.\n");
goto unmap_cfgtable;
}
wmb();
pci_write_config_word(pdev, 4, saved_config_space[2]);
pci_write_config_word(pdev, 4, command_register);
/* Some devices (notably the HP Smart Array 5i Controller)
need a little pause here */
msleep(CCISS_POST_RESET_PAUSE_MSECS);
/* Wait for board to become not ready, then ready. */
dev_info(&pdev->dev, "Waiting for board to become ready.\n");
rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
if (rc) /* Don't bail, might be E500, etc. which can't be reset */
dev_warn(&pdev->dev,
"failed waiting for board to become not ready\n");
rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY);
if (rc) {
dev_warn(&pdev->dev,
"failed waiting for board to become ready\n");
goto unmap_cfgtable;
}
dev_info(&pdev->dev, "board ready.\n");
/* Controller should be in simple mode at this point. If it's not,
* It means we're on one of those controllers which doesn't support
* the doorbell reset method and on which the PCI power management reset
@ -4539,8 +4531,6 @@ static __devinit int cciss_init_reset_devices(struct pci_dev *pdev)
return 0; /* just try to do the kdump anyhow. */
if (rc)
return -ENODEV;
if (cciss_reset_msi(pdev))
return -ENODEV;
/* Now try to get the controller to respond to a no-op */
for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) {
@ -4936,7 +4926,8 @@ static void __exit cciss_cleanup(void)
}
}
kthread_stop(cciss_scan_thread);
remove_proc_entry("driver/cciss", NULL);
if (proc_cciss)
remove_proc_entry("driver/cciss", NULL);
bus_unregister(&cciss_bus_type);
}

4
drivers/block/cciss.h
View File

@ -200,10 +200,14 @@ struct ctlr_info
* the above.
*/
#define CCISS_BOARD_READY_WAIT_SECS (120)
#define CCISS_BOARD_NOT_READY_WAIT_SECS (10)
#define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
#define CCISS_BOARD_READY_ITERATIONS \
((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
#define CCISS_BOARD_NOT_READY_ITERATIONS \
((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \
CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
#define CCISS_POST_RESET_PAUSE_MSECS (3000)
#define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (1000)
#define CCISS_POST_RESET_NOOP_RETRIES (12)

42
drivers/block/drbd/drbd_actlog.c
View File

@ -78,11 +78,10 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
init_completion(&md_io.event);
md_io.error = 0;
if ((rw & WRITE) && !test_bit(MD_NO_BARRIER, &mdev->flags))
rw |= REQ_HARDBARRIER;
if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags))
rw |= REQ_FUA;
rw |= REQ_UNPLUG | REQ_SYNC;
retry:
bio = bio_alloc(GFP_NOIO, 1);
bio->bi_bdev = bdev->md_bdev;
bio->bi_sector = sector;
@ -100,17 +99,6 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
wait_for_completion(&md_io.event);
ok = bio_flagged(bio, BIO_UPTODATE) && md_io.error == 0;
/* check for unsupported barrier op.
* would rather check on EOPNOTSUPP, but that is not reliable.
* don't try again for ANY return value != 0 */
if (unlikely((bio->bi_rw & REQ_HARDBARRIER) && !ok)) {
/* Try again with no barrier */
dev_warn(DEV, "Barriers not supported on meta data device - disabling\n");
set_bit(MD_NO_BARRIER, &mdev->flags);
rw &= ~REQ_HARDBARRIER;
bio_put(bio);
goto retry;
}
out:
bio_put(bio);
return ok;
@ -284,18 +272,32 @@ w_al_write_transaction(struct drbd_conf *mdev, struct drbd_work *w, int unused)
u32 xor_sum = 0;
if (!get_ldev(mdev)) {
dev_err(DEV, "get_ldev() failed in w_al_write_transaction\n");
dev_err(DEV,
"disk is %s, cannot start al transaction (-%d +%d)\n",
drbd_disk_str(mdev->state.disk), evicted, new_enr);
complete(&((struct update_al_work *)w)->event);
return 1;
}
/* do we have to do a bitmap write, first?
* TODO reduce maximum latency:
* submit both bios, then wait for both,
* instead of doing two synchronous sector writes. */
* instead of doing two synchronous sector writes.
* For now, we must not write the transaction,
* if we cannot write out the bitmap of the evicted extent. */
if (mdev->state.conn < C_CONNECTED && evicted != LC_FREE)
drbd_bm_write_sect(mdev, evicted/AL_EXT_PER_BM_SECT);
mutex_lock(&mdev->md_io_mutex); /* protects md_io_page, al_tr_cycle, ... */
/* The bitmap write may have failed, causing a state change. */
if (mdev->state.disk < D_INCONSISTENT) {
dev_err(DEV,
"disk is %s, cannot write al transaction (-%d +%d)\n",
drbd_disk_str(mdev->state.disk), evicted, new_enr);
complete(&((struct update_al_work *)w)->event);
put_ldev(mdev);
return 1;
}
mutex_lock(&mdev->md_io_mutex); /* protects md_io_buffer, al_tr_cycle, ... */
buffer = (struct al_transaction *)page_address(mdev->md_io_page);
buffer->magic = __constant_cpu_to_be32(DRBD_MAGIC);
@ -739,7 +741,7 @@ void drbd_al_apply_to_bm(struct drbd_conf *mdev)
unsigned int enr;
unsigned long add = 0;
char ppb[10];
int i;
int i, tmp;
wait_event(mdev->al_wait, lc_try_lock(mdev->act_log));
@ -747,7 +749,9 @@ void drbd_al_apply_to_bm(struct drbd_conf *mdev)
enr = lc_element_by_index(mdev->act_log, i)->lc_number;
if (enr == LC_FREE)
continue;
add += drbd_bm_ALe_set_all(mdev, enr);
tmp = drbd_bm_ALe_set_all(mdev, enr);
dynamic_dev_dbg(DEV, "AL: set %d bits in extent %u\n", tmp, enr);
add += tmp;
}
lc_unlock(mdev->act_log);

52
drivers/block/drbd/drbd_int.h
View File

@ -114,11 +114,11 @@ struct drbd_conf;
#define D_ASSERT(exp) if (!(exp)) \
dev_err(DEV, "ASSERT( " #exp " ) in %s:%d\n", __FILE__, __LINE__)
#define ERR_IF(exp) if (({ \
int _b = (exp) != 0; \
if (_b) dev_err(DEV, "%s: (%s) in %s:%d\n", \
__func__, #exp, __FILE__, __LINE__); \
_b; \
#define ERR_IF(exp) if (({ \
int _b = (exp) != 0; \
if (_b) dev_err(DEV, "ASSERT FAILED: %s: (%s) in %s:%d\n", \
__func__, #exp, __FILE__, __LINE__); \
_b; \
}))
/* Defines to control fault insertion */
@ -749,17 +749,12 @@ struct drbd_epoch {
/* drbd_epoch flag bits */
enum {
DE_BARRIER_IN_NEXT_EPOCH_ISSUED,
DE_BARRIER_IN_NEXT_EPOCH_DONE,
DE_CONTAINS_A_BARRIER,
DE_HAVE_BARRIER_NUMBER,
DE_IS_FINISHING,
};
enum epoch_event {
EV_PUT,
EV_GOT_BARRIER_NR,
EV_BARRIER_DONE,
EV_BECAME_LAST,
EV_CLEANUP = 32, /* used as flag */
};
@ -801,11 +796,6 @@ enum {
__EE_CALL_AL_COMPLETE_IO,
__EE_MAY_SET_IN_SYNC,
/* This epoch entry closes an epoch using a barrier.
* On sucessful completion, the epoch is released,
* and the P_BARRIER_ACK send. */
__EE_IS_BARRIER,
/* In case a barrier failed,
* we need to resubmit without the barrier flag. */
__EE_RESUBMITTED,
@ -820,7 +810,6 @@ enum {
};
#define EE_CALL_AL_COMPLETE_IO (1<<__EE_CALL_AL_COMPLETE_IO)
#define EE_MAY_SET_IN_SYNC (1<<__EE_MAY_SET_IN_SYNC)
#define EE_IS_BARRIER (1<<__EE_IS_BARRIER)
#define EE_RESUBMITTED (1<<__EE_RESUBMITTED)
#define EE_WAS_ERROR (1<<__EE_WAS_ERROR)
#define EE_HAS_DIGEST (1<<__EE_HAS_DIGEST)
@ -843,16 +832,15 @@ enum {
* Gets cleared when the state.conn
* goes into C_CONNECTED state. */
WRITE_BM_AFTER_RESYNC, /* A kmalloc() during resync failed */
NO_BARRIER_SUPP, /* underlying block device doesn't implement barriers */
CONSIDER_RESYNC,
MD_NO_BARRIER, /* meta data device does not support barriers,
so don't even try */
MD_NO_FUA, /* Users wants us to not use FUA/FLUSH on meta data dev */
SUSPEND_IO, /* suspend application io */
BITMAP_IO, /* suspend application io;
once no more io in flight, start bitmap io */
BITMAP_IO_QUEUED, /* Started bitmap IO */
GO_DISKLESS, /* Disk failed, local_cnt reached zero, we are going diskless */
GO_DISKLESS, /* Disk is being detached, on io-error or admin request. */
WAS_IO_ERROR, /* Local disk failed returned IO error */
RESYNC_AFTER_NEG, /* Resync after online grow after the attach&negotiate finished. */
NET_CONGESTED, /* The data socket is congested */
@ -947,7 +935,6 @@ enum write_ordering_e {
WO_none,
WO_drain_io,
WO_bdev_flush,
WO_bio_barrier
};
struct fifo_buffer {
@ -1281,6 +1268,7 @@ extern int drbd_bmio_set_n_write(struct drbd_conf *mdev);
extern int drbd_bmio_clear_n_write(struct drbd_conf *mdev);
extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf *), char *why);
extern void drbd_go_diskless(struct drbd_conf *mdev);
extern void drbd_ldev_destroy(struct drbd_conf *mdev);
/* Meta data layout
@ -1798,17 +1786,17 @@ static inline void __drbd_chk_io_error_(struct drbd_conf *mdev, int forcedetach,
case EP_PASS_ON:
if (!forcedetach) {
if (__ratelimit(&drbd_ratelimit_state))
dev_err(DEV, "Local IO failed in %s."
"Passing error on...\n", where);
dev_err(DEV, "Local IO failed in %s.\n", where);
break;
}
/* NOTE fall through to detach case if forcedetach set */
case EP_DETACH:
case EP_CALL_HELPER:
set_bit(WAS_IO_ERROR, &mdev->flags);
if (mdev->state.disk > D_FAILED) {
_drbd_set_state(_NS(mdev, disk, D_FAILED), CS_HARD, NULL);
dev_err(DEV, "Local IO failed in %s."
"Detaching...\n", where);
dev_err(DEV,
"Local IO failed in %s. Detaching...\n", where);
}
break;
}
@ -1874,7 +1862,7 @@ static inline sector_t drbd_md_last_sector(struct drbd_backing_dev *bdev)
static inline sector_t drbd_get_capacity(struct block_device *bdev)
{
/* return bdev ? get_capacity(bdev->bd_disk) : 0; */
return bdev ? bdev->bd_inode->i_size >> 9 : 0;
return bdev ? i_size_read(bdev->bd_inode) >> 9 : 0;
}
/**
@ -2127,7 +2115,11 @@ static inline void put_ldev(struct drbd_conf *mdev)
__release(local);
D_ASSERT(i >= 0);
if (i == 0) {
if (mdev->state.disk == D_DISKLESS)
/* even internal references gone, safe to destroy */
drbd_ldev_destroy(mdev);
if (mdev->state.disk == D_FAILED)
/* all application IO references gone. */
drbd_go_diskless(mdev);
wake_up(&mdev->misc_wait);
}
@ -2138,6 +2130,10 @@ static inline int _get_ldev_if_state(struct drbd_conf *mdev, enum drbd_disk_stat
{
int io_allowed;
/* never get a reference while D_DISKLESS */
if (mdev->state.disk == D_DISKLESS)
return 0;
atomic_inc(&mdev->local_cnt);
io_allowed = (mdev->state.disk >= mins);
if (!io_allowed)
@ -2406,12 +2402,12 @@ static inline void drbd_md_flush(struct drbd_conf *mdev)
{
int r;
if (test_bit(MD_NO_BARRIER, &mdev->flags))
if (test_bit(MD_NO_FUA, &mdev->flags))
return;
r = blkdev_issue_flush(mdev->ldev->md_bdev, GFP_KERNEL, NULL);
if (r) {
set_bit(MD_NO_BARRIER, &mdev->flags);
set_bit(MD_NO_FUA, &mdev->flags);
dev_err(DEV, "meta data flush failed with status %d, disabling md-flushes\n", r);
}
}

148
drivers/block/drbd/drbd_main.c
View File

@ -835,6 +835,15 @@ static union drbd_state sanitize_state(struct drbd_conf *mdev, union drbd_state
ns.conn != C_UNCONNECTED && ns.conn != C_DISCONNECTING && ns.conn <= C_TEAR_DOWN)
ns.conn = os.conn;
/* we cannot fail (again) if we already detached */
if (ns.disk == D_FAILED && os.disk == D_DISKLESS)
ns.disk = D_DISKLESS;
/* if we are only D_ATTACHING yet,
* we can (and should) go directly to D_DISKLESS. */
if (ns.disk == D_FAILED && os.disk == D_ATTACHING)
ns.disk = D_DISKLESS;
/* After C_DISCONNECTING only C_STANDALONE may follow */
if (os.conn == C_DISCONNECTING && ns.conn != C_STANDALONE)
ns.conn = os.conn;
@ -1056,7 +1065,15 @@ int __drbd_set_state(struct drbd_conf *mdev,
!test_and_set_bit(CONFIG_PENDING, &mdev->flags))
set_bit(DEVICE_DYING, &mdev->flags);
mdev->state.i = ns.i;
/* if we are going -> D_FAILED or D_DISKLESS, grab one extra reference
* on the ldev here, to be sure the transition -> D_DISKLESS resp.
* drbd_ldev_destroy() won't happen before our corresponding
* after_state_ch works run, where we put_ldev again. */
if ((os.disk != D_FAILED && ns.disk == D_FAILED) ||
(os.disk != D_DISKLESS && ns.disk == D_DISKLESS))
atomic_inc(&mdev->local_cnt);
mdev->state = ns;
wake_up(&mdev->misc_wait);
wake_up(&mdev->state_wait);
@ -1268,7 +1285,6 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
if (test_bit(NEW_CUR_UUID, &mdev->flags)) {
drbd_uuid_new_current(mdev);
clear_bit(NEW_CUR_UUID, &mdev->flags);
drbd_md_sync(mdev);
}
spin_lock_irq(&mdev->req_lock);
_drbd_set_state(_NS(mdev, susp_fen, 0), CS_VERBOSE, NULL);
@ -1365,63 +1381,64 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
os.disk > D_INCONSISTENT && ns.disk == D_INCONSISTENT)
drbd_queue_bitmap_io(mdev, &drbd_bmio_set_n_write, NULL, "set_n_write from invalidate");
/* first half of local IO error */
if (os.disk > D_FAILED && ns.disk == D_FAILED) {
enum drbd_io_error_p eh = EP_PASS_ON;
/* first half of local IO error, failure to attach,
* or administrative detach */
if (os.disk != D_FAILED && ns.disk == D_FAILED) {
enum drbd_io_error_p eh;
int was_io_error;
/* corresponding get_ldev was in __drbd_set_state, to serialize
* our cleanup here with the transition to D_DISKLESS,
* so it is safe to dreference ldev here. */
eh = mdev->ldev->dc.on_io_error;
was_io_error = test_and_clear_bit(WAS_IO_ERROR, &mdev->flags);
/* current state still has to be D_FAILED,
* there is only one way out: to D_DISKLESS,
* and that may only happen after our put_ldev below. */
if (mdev->state.disk != D_FAILED)
dev_err(DEV,
"ASSERT FAILED: disk is %s during detach\n",
drbd_disk_str(mdev->state.disk));
if (drbd_send_state(mdev))
dev_warn(DEV, "Notified peer that my disk is broken.\n");
dev_warn(DEV, "Notified peer that I am detaching my disk\n");
else
dev_err(DEV, "Sending state for drbd_io_error() failed\n");
dev_err(DEV, "Sending state for detaching disk failed\n");
drbd_rs_cancel_all(mdev);
if (get_ldev_if_state(mdev, D_FAILED)) {
eh = mdev->ldev->dc.on_io_error;
put_ldev(mdev);
}
if (eh == EP_CALL_HELPER)
/* In case we want to get something to stable storage still,
* this may be the last chance.
* Following put_ldev may transition to D_DISKLESS. */
drbd_md_sync(mdev);
put_ldev(mdev);
if (was_io_error && eh == EP_CALL_HELPER)
drbd_khelper(mdev, "local-io-error");
}
/* second half of local IO error, failure to attach,
* or administrative detach,
* after local_cnt references have reached zero again */
if (os.disk != D_DISKLESS && ns.disk == D_DISKLESS) {
/* We must still be diskless,
* re-attach has to be serialized with this! */
if (mdev->state.disk != D_DISKLESS)
dev_err(DEV,
"ASSERT FAILED: disk is %s while going diskless\n",
drbd_disk_str(mdev->state.disk));
/* second half of local IO error handling,
* after local_cnt references have reached zero: */
if (os.disk == D_FAILED && ns.disk == D_DISKLESS) {
mdev->rs_total = 0;
mdev->rs_failed = 0;
atomic_set(&mdev->rs_pending_cnt, 0);
}
mdev->rs_total = 0;
mdev->rs_failed = 0;
atomic_set(&mdev->rs_pending_cnt, 0);
if (os.disk > D_DISKLESS && ns.disk == D_DISKLESS) {
/* We must still be diskless,
* re-attach has to be serialized with this! */
if (mdev->state.disk != D_DISKLESS)
dev_err(DEV,
"ASSERT FAILED: disk is %s while going diskless\n",
drbd_disk_str(mdev->state.disk));
/* we cannot assert local_cnt == 0 here, as get_ldev_if_state
* will inc/dec it frequently. Since we became D_DISKLESS, no
* one has touched the protected members anymore, though, so we
* are safe to free them here. */
if (drbd_send_state(mdev))
dev_warn(DEV, "Notified peer that I detached my disk.\n");
dev_warn(DEV, "Notified peer that I'm now diskless.\n");
else
dev_err(DEV, "Sending state for detach failed\n");
lc_destroy(mdev->resync);
mdev->resync = NULL;
lc_destroy(mdev->act_log);
mdev->act_log = NULL;
__no_warn(local,
drbd_free_bc(mdev->ldev);
mdev->ldev = NULL;);
if (mdev->md_io_tmpp) {
__free_page(mdev->md_io_tmpp);
mdev->md_io_tmpp = NULL;
}
dev_err(DEV, "Sending state for being diskless failed\n");
/* corresponding get_ldev in __drbd_set_state
* this may finaly trigger drbd_ldev_destroy. */
put_ldev(mdev);
}
/* Disks got bigger while they were detached */
@ -2772,11 +2789,6 @@ void drbd_init_set_defaults(struct drbd_conf *mdev)
drbd_set_defaults(mdev);
/* for now, we do NOT yet support it,
* even though we start some framework
* to eventually support barriers */
set_bit(NO_BARRIER_SUPP, &mdev->flags);
atomic_set(&mdev->ap_bio_cnt, 0);
atomic_set(&mdev->ap_pending_cnt, 0);
atomic_set(&mdev->rs_pending_cnt, 0);
@ -2842,7 +2854,7 @@ void drbd_init_set_defaults(struct drbd_conf *mdev)
drbd_thread_init(mdev, &mdev->asender, drbd_asender);
mdev->agreed_pro_version = PRO_VERSION_MAX;
mdev->write_ordering = WO_bio_barrier;
mdev->write_ordering = WO_bdev_flush;
mdev->resync_wenr = LC_FREE;
}
@ -2899,7 +2911,6 @@ void drbd_mdev_cleanup(struct drbd_conf *mdev)
D_ASSERT(list_empty(&mdev->resync_work.list));
D_ASSERT(list_empty(&mdev->unplug_work.list));
D_ASSERT(list_empty(&mdev->go_diskless.list));
}
@ -3660,6 +3671,8 @@ void drbd_uuid_new_current(struct drbd_conf *mdev) __must_hold(local)
get_random_bytes(&val, sizeof(u64));
_drbd_uuid_set(mdev, UI_CURRENT, val);
/* get it to stable storage _now_ */
drbd_md_sync(mdev);
}
void drbd_uuid_set_bm(struct drbd_conf *mdev, u64 val) __must_hold(local)
@ -3756,19 +3769,31 @@ static int w_bitmap_io(struct drbd_conf *mdev, struct drbd_work *w, int unused)
return 1;
}
void drbd_ldev_destroy(struct drbd_conf *mdev)
{
lc_destroy(mdev->resync);
mdev->resync = NULL;
lc_destroy(mdev->act_log);
mdev->act_log = NULL;
__no_warn(local,
drbd_free_bc(mdev->ldev);
mdev->ldev = NULL;);
if (mdev->md_io_tmpp) {
__free_page(mdev->md_io_tmpp);
mdev->md_io_tmpp = NULL;
}
clear_bit(GO_DISKLESS, &mdev->flags);
}
static int w_go_diskless(struct drbd_conf *mdev, struct drbd_work *w, int unused)
{
D_ASSERT(mdev->state.disk == D_FAILED);
/* we cannot assert local_cnt == 0 here, as get_ldev_if_state will
* inc/dec it frequently. Once we are D_DISKLESS, no one will touch
* the protected members anymore, though, so in the after_state_ch work
* it will be safe to free them. */
* the protected members anymore, though, so once put_ldev reaches zero
* again, it will be safe to free them. */
drbd_force_state(mdev, NS(disk, D_DISKLESS));
/* We need to wait for return of references checked out while we still
* have been D_FAILED, though (drbd_md_sync, bitmap io). */
wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
clear_bit(GO_DISKLESS, &mdev->flags);
return 1;
}
@ -3777,9 +3802,6 @@ void drbd_go_diskless(struct drbd_conf *mdev)
D_ASSERT(mdev->state.disk == D_FAILED);
if (!test_and_set_bit(GO_DISKLESS, &mdev->flags))
drbd_queue_work(&mdev->data.work, &mdev->go_diskless);
/* don't drbd_queue_work_front,
* we need to serialize with the after_state_ch work
* of the -> D_FAILED transition. */
}
/**

25
drivers/block/drbd/drbd_nl.c
View File

@ -870,6 +870,11 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
retcode = ERR_DISK_CONFIGURED;
goto fail;
}
/* It may just now have detached because of IO error. Make sure
* drbd_ldev_destroy is done already, we may end up here very fast,
* e.g. if someone calls attach from the on-io-error handler,
* to realize a "hot spare" feature (not that I'd recommend that) */
wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
/* allocation not in the IO path, cqueue thread context */
nbc = kzalloc(sizeof(struct drbd_backing_dev), GFP_KERNEL);
@ -1098,9 +1103,9 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
/* Reset the "barriers don't work" bits here, then force meta data to
* be written, to ensure we determine if barriers are supported. */
if (nbc->dc.no_md_flush)
set_bit(MD_NO_BARRIER, &mdev->flags);
set_bit(MD_NO_FUA, &mdev->flags);
else
clear_bit(MD_NO_BARRIER, &mdev->flags);
clear_bit(MD_NO_FUA, &mdev->flags);
/* Point of no return reached.
* Devices and memory are no longer released by error cleanup below.
@ -1112,8 +1117,8 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
nbc = NULL;
resync_lru = NULL;
mdev->write_ordering = WO_bio_barrier;
drbd_bump_write_ordering(mdev, WO_bio_barrier);
mdev->write_ordering = WO_bdev_flush;
drbd_bump_write_ordering(mdev, WO_bdev_flush);
if (drbd_md_test_flag(mdev->ldev, MDF_CRASHED_PRIMARY))
set_bit(CRASHED_PRIMARY, &mdev->flags);
@ -1262,7 +1267,7 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
force_diskless_dec:
put_ldev(mdev);
force_diskless:
drbd_force_state(mdev, NS(disk, D_DISKLESS));
drbd_force_state(mdev, NS(disk, D_FAILED));
drbd_md_sync(mdev);
release_bdev2_fail:
if (nbc)
@ -1285,10 +1290,19 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
return 0;
}
/* Detaching the disk is a process in multiple stages. First we need to lock
* out application IO, in-flight IO, IO stuck in drbd_al_begin_io.
* Then we transition to D_DISKLESS, and wait for put_ldev() to return all
* internal references as well.
* Only then we have finally detached. */
static int drbd_nl_detach(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
struct drbd_nl_cfg_reply *reply)
{
drbd_suspend_io(mdev); /* so no-one is stuck in drbd_al_begin_io */
reply->ret_code = drbd_request_state(mdev, NS(disk, D_DISKLESS));
if (mdev->state.disk == D_DISKLESS)
wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
drbd_resume_io(mdev);
return 0;
}
@ -1953,7 +1967,6 @@ static int drbd_nl_resume_io(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
if (test_bit(NEW_CUR_UUID, &mdev->flags)) {
drbd_uuid_new_current(mdev);
clear_bit(NEW_CUR_UUID, &mdev->flags);
drbd_md_sync(mdev);
}
drbd_suspend_io(mdev);
reply->ret_code = drbd_request_state(mdev, NS3(susp, 0, susp_nod, 0, susp_fen, 0));

1
drivers/block/drbd/drbd_proc.c
View File

@ -158,7 +158,6 @@ static int drbd_seq_show(struct seq_file *seq, void *v)
[WO_none] = 'n',
[WO_drain_io] = 'd',
[WO_bdev_flush] = 'f',
[WO_bio_barrier] = 'b',
};
seq_printf(seq, "version: " REL_VERSION " (api:%d/proto:%d-%d)\n%s\n",

217
drivers/block/drbd/drbd_receiver.c
View File

@ -49,11 +49,6 @@
#include "drbd_vli.h"
struct flush_work {
struct drbd_work w;
struct drbd_epoch *epoch;
};
enum finish_epoch {
FE_STILL_LIVE,
FE_DESTROYED,
@ -66,16 +61,6 @@ static int drbd_do_auth(struct drbd_conf *mdev);
static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *, struct drbd_epoch *, enum epoch_event);
static int e_end_block(struct drbd_conf *, struct drbd_work *, int);
static struct drbd_epoch *previous_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
{
struct drbd_epoch *prev;
spin_lock(&mdev->epoch_lock);
prev = list_entry(epoch->list.prev, struct drbd_epoch, list);
if (prev == epoch || prev == mdev->current_epoch)
prev = NULL;
spin_unlock(&mdev->epoch_lock);
return prev;
}
#define GFP_TRY (__GFP_HIGHMEM | __GFP_NOWARN)
@ -981,7 +966,7 @@ static int drbd_recv_header(struct drbd_conf *mdev, enum drbd_packets *cmd, unsi
return TRUE;
}
static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
static void drbd_flush(struct drbd_conf *mdev)
{
int rv;
@ -997,24 +982,6 @@ static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct d
}
put_ldev(mdev);
}
return drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
}
static int w_flush(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
{
struct flush_work *fw = (struct flush_work *)w;
struct drbd_epoch *epoch = fw->epoch;
kfree(w);
if (!test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags))
drbd_flush_after_epoch(mdev, epoch);
drbd_may_finish_epoch(mdev, epoch, EV_PUT |
(mdev->state.conn < C_CONNECTED ? EV_CLEANUP : 0));
return 1;
}
/**
@ -1027,15 +994,13 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
struct drbd_epoch *epoch,
enum epoch_event ev)
{
int finish, epoch_size;
int epoch_size;
struct drbd_epoch *next_epoch;
int schedule_flush = 0;
enum finish_epoch rv = FE_STILL_LIVE;
spin_lock(&mdev->epoch_lock);
do {
next_epoch = NULL;
finish = 0;
epoch_size = atomic_read(&epoch->epoch_size);
@ -1045,16 +1010,6 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
break;
case EV_GOT_BARRIER_NR:
set_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags);
/* Special case: If we just switched from WO_bio_barrier to
WO_bdev_flush we should not finish the current epoch */
if (test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags) && epoch_size == 1 &&
mdev->write_ordering != WO_bio_barrier &&
epoch == mdev->current_epoch)
clear_bit(DE_CONTAINS_A_BARRIER, &epoch->flags);
break;
case EV_BARRIER_DONE:
set_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags);
break;
case EV_BECAME_LAST:
/* nothing to do*/
@ -1063,23 +1018,7 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
if (epoch_size != 0 &&
atomic_read(&epoch->active) == 0 &&
test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags) &&
epoch->list.prev == &mdev->current_epoch->list &&
!test_bit(DE_IS_FINISHING, &epoch->flags)) {
/* Nearly all conditions are met to finish that epoch... */
if (test_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags) ||
mdev->write_ordering == WO_none ||
(epoch_size == 1 && test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) ||
ev & EV_CLEANUP) {
finish = 1;
set_bit(DE_IS_FINISHING, &epoch->flags);
} else if (!test_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags) &&
mdev->write_ordering == WO_bio_barrier) {
atomic_inc(&epoch->active);
schedule_flush = 1;
}
}
if (finish) {
test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags)) {
if (!(ev & EV_CLEANUP)) {
spin_unlock(&mdev->epoch_lock);
drbd_send_b_ack(mdev, epoch->barrier_nr, epoch_size);
@ -1102,6 +1041,7 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
/* atomic_set(&epoch->active, 0); is already zero */
if (rv == FE_STILL_LIVE)
rv = FE_RECYCLED;
wake_up(&mdev->ee_wait);
}
}
@ -1113,22 +1053,6 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
spin_unlock(&mdev->epoch_lock);
if (schedule_flush) {
struct flush_work *fw;
fw = kmalloc(sizeof(*fw), GFP_ATOMIC);
if (fw) {
fw->w.cb = w_flush;
fw->epoch = epoch;
drbd_queue_work(&mdev->data.work, &fw->w);
} else {
dev_warn(DEV, "Could not kmalloc a flush_work obj\n");
set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
/* That is not a recursion, only one level */
drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
drbd_may_finish_epoch(mdev, epoch, EV_PUT);
}
}
return rv;
}
@ -1144,19 +1068,16 @@ void drbd_bump_write_ordering(struct drbd_conf *mdev, enum write_ordering_e wo)
[WO_none] = "none",
[WO_drain_io] = "drain",
[WO_bdev_flush] = "flush",
[WO_bio_barrier] = "barrier",
};
pwo = mdev->write_ordering;
wo = min(pwo, wo);
if (wo == WO_bio_barrier && mdev->ldev->dc.no_disk_barrier)
wo = WO_bdev_flush;
if (wo == WO_bdev_flush && mdev->ldev->dc.no_disk_flush)
wo = WO_drain_io;
if (wo == WO_drain_io && mdev->ldev->dc.no_disk_drain)
wo = WO_none;
mdev->write_ordering = wo;
if (pwo != mdev->write_ordering || wo == WO_bio_barrier)
if (pwo != mdev->write_ordering || wo == WO_bdev_flush)
dev_info(DEV, "Method to ensure write ordering: %s\n", write_ordering_str[mdev->write_ordering]);
}
@ -1192,7 +1113,7 @@ int drbd_submit_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e,
bio->bi_sector = sector;
bio->bi_bdev = mdev->ldev->backing_bdev;
/* we special case some flags in the multi-bio case, see below
* (REQ_UNPLUG, REQ_HARDBARRIER) */
* (REQ_UNPLUG) */
bio->bi_rw = rw;
bio->bi_private = e;
bio->bi_end_io = drbd_endio_sec;
@ -1226,11 +1147,6 @@ int drbd_submit_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e,
bio->bi_rw &= ~REQ_UNPLUG;
drbd_generic_make_request(mdev, fault_type, bio);
/* strip off REQ_HARDBARRIER,
* unless it is the first or last bio */
if (bios && bios->bi_next)
bios->bi_rw &= ~REQ_HARDBARRIER;
} while (bios);
maybe_kick_lo(mdev);
return 0;
@ -1244,45 +1160,9 @@ int drbd_submit_ee(struct drbd_conf *mdev, struct drbd_epoch_entry *e,
return -ENOMEM;
}
/**
* w_e_reissue() - Worker callback; Resubmit a bio, without REQ_HARDBARRIER set
* @mdev: DRBD device.
* @w: work object.
* @cancel: The connection will be closed anyways (unused in this callback)
*/
int w_e_reissue(struct drbd_conf *mdev, struct drbd_work *w, int cancel) __releases(local)
{
struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
/* We leave DE_CONTAINS_A_BARRIER and EE_IS_BARRIER in place,
(and DE_BARRIER_IN_NEXT_EPOCH_ISSUED in the previous Epoch)
so that we can finish that epoch in drbd_may_finish_epoch().
That is necessary if we already have a long chain of Epochs, before
we realize that REQ_HARDBARRIER is actually not supported */
/* As long as the -ENOTSUPP on the barrier is reported immediately
that will never trigger. If it is reported late, we will just
print that warning and continue correctly for all future requests
with WO_bdev_flush */
if (previous_epoch(mdev, e->epoch))
dev_warn(DEV, "Write ordering was not enforced (one time event)\n");
/* we still have a local reference,
* get_ldev was done in receive_Data. */
e->w.cb = e_end_block;
if (drbd_submit_ee(mdev, e, WRITE, DRBD_FAULT_DT_WR) != 0) {
/* drbd_submit_ee fails for one reason only:
* if was not able to allocate sufficient bios.
* requeue, try again later. */
e->w.cb = w_e_reissue;
drbd_queue_work(&mdev->data.work, &e->w);
}
return 1;
}
static int receive_Barrier(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned int data_size)
{
int rv, issue_flush;
int rv;
struct p_barrier *p = &mdev->data.rbuf.barrier;
struct drbd_epoch *epoch;
@ -1300,44 +1180,40 @@ static int receive_Barrier(struct drbd_conf *mdev, enum drbd_packets cmd, unsign
* Therefore we must send the barrier_ack after the barrier request was
* completed. */
switch (mdev->write_ordering) {
case WO_bio_barrier:
case WO_none:
if (rv == FE_RECYCLED)
return TRUE;
break;
/* receiver context, in the writeout path of the other node.
* avoid potential distributed deadlock */
epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
if (epoch)
break;
else
dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
/* Fall through */
case WO_bdev_flush:
case WO_drain_io:
if (rv == FE_STILL_LIVE) {
set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
}
if (rv == FE_RECYCLED)
return TRUE;
/* The asender will send all the ACKs and barrier ACKs out, since
all EEs moved from the active_ee to the done_ee. We need to
provide a new epoch object for the EEs that come in soon */
break;
}
/* receiver context, in the writeout path of the other node.
* avoid potential distributed deadlock */
epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
if (!epoch) {
dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
if (issue_flush) {
rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
if (rv == FE_RECYCLED)
return TRUE;
drbd_flush(mdev);
if (atomic_read(&mdev->current_epoch->epoch_size)) {
epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
if (epoch)
break;
}
drbd_wait_ee_list_empty(mdev, &mdev->done_ee);
epoch = mdev->current_epoch;
wait_event(mdev->ee_wait, atomic_read(&epoch->epoch_size) == 0);
D_ASSERT(atomic_read(&epoch->active) == 0);
D_ASSERT(epoch->flags == 0);
return TRUE;
default:
dev_err(DEV, "Strangeness in mdev->write_ordering %d\n", mdev->write_ordering);
return FALSE;
}
epoch->flags = 0;
@ -1652,15 +1528,8 @@ static int e_end_block(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
{
struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
sector_t sector = e->sector;
struct drbd_epoch *epoch;
int ok = 1, pcmd;
if (e->flags & EE_IS_BARRIER) {
epoch = previous_epoch(mdev, e->epoch);
if (epoch)
drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE + (cancel ? EV_CLEANUP : 0));
}
if (mdev->net_conf->wire_protocol == DRBD_PROT_C) {
if (likely((e->flags & EE_WAS_ERROR) == 0)) {
pcmd = (mdev->state.conn >= C_SYNC_SOURCE &&
@ -1817,27 +1686,6 @@ static int receive_Data(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned
e->epoch = mdev->current_epoch;
atomic_inc(&e->epoch->epoch_size);
atomic_inc(&e->epoch->active);
if (mdev->write_ordering == WO_bio_barrier && atomic_read(&e->epoch->epoch_size) == 1) {
struct drbd_epoch *epoch;
/* Issue a barrier if we start a new epoch, and the previous epoch
was not a epoch containing a single request which already was
a Barrier. */
epoch = list_entry(e->epoch->list.prev, struct drbd_epoch, list);
if (epoch == e->epoch) {
set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
rw |= REQ_HARDBARRIER;
e->flags |= EE_IS_BARRIER;
} else {
if (atomic_read(&epoch->epoch_size) > 1 ||
!test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) {
set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
rw |= REQ_HARDBARRIER;
e->flags |= EE_IS_BARRIER;
}
}
}
spin_unlock(&mdev->epoch_lock);
dp_flags = be32_to_cpu(p->dp_flags);
@ -1995,10 +1843,11 @@ static int receive_Data(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned
break;
}
if (mdev->state.pdsk == D_DISKLESS) {
if (mdev->state.pdsk < D_INCONSISTENT) {
/* In case we have the only disk of the cluster, */
drbd_set_out_of_sync(mdev, e->sector, e->size);
e->flags |= EE_CALL_AL_COMPLETE_IO;
e->flags &= ~EE_MAY_SET_IN_SYNC;
drbd_al_begin_io(mdev, e->sector);
}
@ -3362,7 +3211,7 @@ static int receive_state(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned
if (ns.conn == C_MASK) {
ns.conn = C_CONNECTED;
if (mdev->state.disk == D_NEGOTIATING) {
drbd_force_state(mdev, NS(disk, D_DISKLESS));
drbd_force_state(mdev, NS(disk, D_FAILED));
} else if (peer_state.disk == D_NEGOTIATING) {
dev_err(DEV, "Disk attach process on the peer node was aborted.\n");
peer_state.disk = D_DISKLESS;

38
drivers/block/drbd/drbd_req.c
View File

@ -258,7 +258,7 @@ void _req_may_be_done(struct drbd_request *req, struct bio_and_error *m)
if (!hlist_unhashed(&req->colision))
hlist_del(&req->colision);
else
D_ASSERT((s & RQ_NET_MASK) == 0);
D_ASSERT((s & (RQ_NET_MASK & ~RQ_NET_DONE)) == 0);
/* for writes we need to do some extra housekeeping */
if (rw == WRITE)
@ -813,7 +813,8 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio)
mdev->state.conn >= C_CONNECTED));
if (!(local || remote) && !is_susp(mdev->state)) {
dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
if (__ratelimit(&drbd_ratelimit_state))
dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
goto fail_free_complete;
}
@ -942,12 +943,21 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio)
if (local) {
req->private_bio->bi_bdev = mdev->ldev->backing_bdev;
if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
: rw == READ ? DRBD_FAULT_DT_RD
: DRBD_FAULT_DT_RA))
/* State may have changed since we grabbed our reference on the
* mdev->ldev member. Double check, and short-circuit to endio.
* In case the last activity log transaction failed to get on
* stable storage, and this is a WRITE, we may not even submit
* this bio. */
if (get_ldev(mdev)) {
if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
: rw == READ ? DRBD_FAULT_DT_RD
: DRBD_FAULT_DT_RA))
bio_endio(req->private_bio, -EIO);
else
generic_make_request(req->private_bio);
put_ldev(mdev);
} else
bio_endio(req->private_bio, -EIO);
else
generic_make_request(req->private_bio);
}
/* we need to plug ALWAYS since we possibly need to kick lo_dev.
@ -1022,20 +1032,6 @@ int drbd_make_request_26(struct request_queue *q, struct bio *bio)
return 0;
}
/* Reject barrier requests if we know the underlying device does
* not support them.
* XXX: Need to get this info from peer as well some how so we
* XXX: reject if EITHER side/data/metadata area does not support them.
*
* because of those XXX, this is not yet enabled,
* i.e. in drbd_init_set_defaults we set the NO_BARRIER_SUPP bit.
*/
if (unlikely(bio->bi_rw & REQ_HARDBARRIER) && test_bit(NO_BARRIER_SUPP, &mdev->flags)) {
/* dev_warn(DEV, "Rejecting barrier request as underlying device does not support\n"); */
bio_endio(bio, -EOPNOTSUPP);
return 0;
}
/*
* what we "blindly" assume:
*/

23
drivers/block/drbd/drbd_worker.c
View File

@ -102,12 +102,6 @@ void drbd_endio_read_sec_final(struct drbd_epoch_entry *e) __releases(local)
put_ldev(mdev);
}
static int is_failed_barrier(int ee_flags)
{
return (ee_flags & (EE_IS_BARRIER|EE_WAS_ERROR|EE_RESUBMITTED))
== (EE_IS_BARRIER|EE_WAS_ERROR);
}
/* writes on behalf of the partner, or resync writes,
* "submitted" by the receiver, final stage. */
static void drbd_endio_write_sec_final(struct drbd_epoch_entry *e) __releases(local)
@ -119,21 +113,6 @@ static void drbd_endio_write_sec_final(struct drbd_epoch_entry *e) __releases(lo
int is_syncer_req;
int do_al_complete_io;
/* if this is a failed barrier request, disable use of barriers,
* and schedule for resubmission */
if (is_failed_barrier(e->flags)) {
drbd_bump_write_ordering(mdev, WO_bdev_flush);
spin_lock_irqsave(&mdev->req_lock, flags);
list_del(&e->w.list);
e->flags = (e->flags & ~EE_WAS_ERROR) | EE_RESUBMITTED;
e->w.cb = w_e_reissue;
/* put_ldev actually happens below, once we come here again. */
__release(local);
spin_unlock_irqrestore(&mdev->req_lock, flags);
drbd_queue_work(&mdev->data.work, &e->w);
return;
}
D_ASSERT(e->block_id != ID_VACANT);
/* after we moved e to done_ee,
@ -925,7 +904,7 @@ int drbd_resync_finished(struct drbd_conf *mdev)
drbd_md_sync(mdev);
if (test_and_clear_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags)) {
dev_warn(DEV, "Writing the whole bitmap, due to failed kmalloc\n");
dev_info(DEV, "Writing the whole bitmap\n");
drbd_queue_bitmap_io(mdev, &drbd_bm_write, NULL, "write from resync_finished");
}

6
drivers/block/loop.c
View File

@ -481,12 +481,6 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio)
if (bio_rw(bio) == WRITE) {
struct file *file = lo->lo_backing_file;
/* REQ_HARDBARRIER is deprecated */
if (bio->bi_rw & REQ_HARDBARRIER) {
ret = -EOPNOTSUPP;
goto out;
}
if (bio->bi_rw & REQ_FLUSH) {
ret = vfs_fsync(file, 0);
if (unlikely(ret && ret != -EINVAL)) {

2
drivers/block/xen-blkfront.c
View File

@ -289,8 +289,6 @@ static int blkif_queue_request(struct request *req)
ring_req->operation = rq_data_dir(req) ?
BLKIF_OP_WRITE : BLKIF_OP_READ;
if (req->cmd_flags & REQ_HARDBARRIER)
ring_req->operation = BLKIF_OP_WRITE_BARRIER;
ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);

5
drivers/bluetooth/btusb.c
View File

@ -68,6 +68,9 @@ static struct usb_device_id btusb_table[] = {
/* Apple MacBookPro6,2 */
{ USB_DEVICE(0x05ac, 0x8218) },
/* Apple MacBookAir3,1, MacBookAir3,2 */
{ USB_DEVICE(0x05ac, 0x821b) },
/* AVM BlueFRITZ! USB v2.0 */
{ USB_DEVICE(0x057c, 0x3800) },
@ -1029,6 +1032,8 @@ static int btusb_probe(struct usb_interface *intf,
usb_set_intfdata(intf, data);
usb_enable_autosuspend(interface_to_usbdev(intf));
return 0;
}

6
drivers/char/agp/intel-gtt.c
View File

@ -1210,14 +1210,14 @@ static void gen6_write_entry(dma_addr_t addr, unsigned int entry,
unsigned int gfdt = flags & AGP_USER_CACHED_MEMORY_GFDT;
u32 pte_flags;
if (type_mask == AGP_USER_UNCACHED_MEMORY)
if (type_mask == AGP_USER_MEMORY)
pte_flags = GEN6_PTE_UNCACHED | I810_PTE_VALID;
else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) {
pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
if (gfdt)
pte_flags |= GEN6_PTE_GFDT;
} else { /* set 'normal'/'cached' to LLC by default */
pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
if (gfdt)
pte_flags |= GEN6_PTE_GFDT;
}

1
drivers/char/amiserial.c
View File

@ -1299,7 +1299,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
{
struct async_struct * info = tty->driver_data;
struct async_icount cprev, cnow; /* kernel counter temps */
struct serial_icounter_struct icount;
void __user *argp = (void __user *)arg;
unsigned long flags;

1
drivers/char/nozomi.c
View File

@ -1828,7 +1828,6 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct port *port = tty->driver_data;
void __user *argp = (void __user *)arg;
int rval = -ENOIOCTLCMD;
DBG1("******** IOCTL, cmd: %d", cmd);

1
drivers/char/pcmcia/synclink_cs.c
View File

@ -2796,6 +2796,7 @@ static const struct tty_operations mgslpc_ops = {
.hangup = mgslpc_hangup,
.tiocmget = tiocmget,
.tiocmset = tiocmset,
.get_icount = mgslpc_get_icount,
.proc_fops = &mgslpc_proc_fops,
};

2
drivers/gpu/drm/drm_crtc_helper.c
View File

@ -276,7 +276,7 @@ static bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
struct drm_crtc *tmp;
int crtc_mask = 1;
WARN(!crtc, "checking null crtc?");
WARN(!crtc, "checking null crtc?\n");
dev = crtc->dev;

26
drivers/gpu/drm/drm_edid.c
View File

@ -240,7 +240,7 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
.addr = DDC_ADDR,
.flags = I2C_M_RD,
.len = len,
.buf = buf + start,
.buf = buf,
}
};
@ -253,7 +253,7 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
static u8 *
drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
{
int i, j = 0;
int i, j = 0, valid_extensions = 0;
u8 *block, *new;
if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
@ -280,14 +280,28 @@ drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
for (j = 1; j <= block[0x7e]; j++) {
for (i = 0; i < 4; i++) {
if (drm_do_probe_ddc_edid(adapter, block, j,
EDID_LENGTH))
if (drm_do_probe_ddc_edid(adapter,
block + (valid_extensions + 1) * EDID_LENGTH,
j, EDID_LENGTH))
goto out;
if (drm_edid_block_valid(block + j * EDID_LENGTH))
if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH)) {
valid_extensions++;
break;
}
}
if (i == 4)
goto carp;
dev_warn(connector->dev->dev,
"%s: Ignoring invalid EDID block %d.\n",
drm_get_connector_name(connector), j);
}
if (valid_extensions != block[0x7e]) {
block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
block[0x7e] = valid_extensions;
new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
if (!new)
goto out;
block = new;
}
return block;

2
drivers/gpu/drm/i915/i915_drv.c
View File

@ -44,7 +44,7 @@ unsigned int i915_fbpercrtc = 0;
module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
unsigned int i915_powersave = 1;
module_param_named(powersave, i915_powersave, int, 0400);
module_param_named(powersave, i915_powersave, int, 0600);
unsigned int i915_lvds_downclock = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);

1
drivers/gpu/drm/i915/i915_drv.h
View File

@ -1321,6 +1321,7 @@ static inline void i915_write(struct drm_i915_private *dev_priv, u32 reg,
#define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type)
#define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
#define PRIMARY_RINGBUFFER_SIZE (128*1024)

118
drivers/gpu/drm/i915/i915_gem.c
View File

@ -2172,7 +2172,7 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
static int i915_ring_idle(struct drm_device *dev,
struct intel_ring_buffer *ring)
{
if (list_empty(&ring->gpu_write_list))
if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list))
return 0;
i915_gem_flush_ring(dev, NULL, ring,
@ -2190,9 +2190,7 @@ i915_gpu_idle(struct drm_device *dev)
int ret;
lists_empty = (list_empty(&dev_priv->mm.flushing_list) &&
list_empty(&dev_priv->render_ring.active_list) &&
list_empty(&dev_priv->bsd_ring.active_list) &&
list_empty(&dev_priv->blt_ring.active_list));
list_empty(&dev_priv->mm.active_list));
if (lists_empty)
return 0;
@ -3108,7 +3106,8 @@ i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
* write domain
*/
if (obj->write_domain &&
obj->write_domain != obj->pending_read_domains) {
(obj->write_domain != obj->pending_read_domains ||
obj_priv->ring != ring)) {
flush_domains |= obj->write_domain;
invalidate_domains |=
obj->pending_read_domains & ~obj->write_domain;
@ -3497,6 +3496,52 @@ i915_gem_execbuffer_pin(struct drm_device *dev,
return 0;
}
static int
i915_gem_execbuffer_move_to_gpu(struct drm_device *dev,
struct drm_file *file,
struct intel_ring_buffer *ring,
struct drm_gem_object **objects,
int count)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret, i;
/* Zero the global flush/invalidate flags. These
* will be modified as new domains are computed
* for each object
*/
dev->invalidate_domains = 0;
dev->flush_domains = 0;
dev_priv->mm.flush_rings = 0;
for (i = 0; i < count; i++)
i915_gem_object_set_to_gpu_domain(objects[i], ring);
if (dev->invalidate_domains | dev->flush_domains) {
#if WATCH_EXEC
DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
__func__,
dev->invalidate_domains,
dev->flush_domains);
#endif
i915_gem_flush(dev, file,
dev->invalidate_domains,
dev->flush_domains,
dev_priv->mm.flush_rings);
}
for (i = 0; i < count; i++) {
struct drm_i915_gem_object *obj = to_intel_bo(objects[i]);
/* XXX replace with semaphores */
if (obj->ring && ring != obj->ring) {
ret = i915_gem_object_wait_rendering(&obj->base, true);
if (ret)
return ret;
}
}
return 0;
}
/* Throttle our rendering by waiting until the ring has completed our requests
* emitted over 20 msec ago.
*
@ -3757,33 +3802,10 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
goto err;
}
/* Zero the global flush/invalidate flags. These
* will be modified as new domains are computed
* for each object
*/
dev->invalidate_domains = 0;
dev->flush_domains = 0;
dev_priv->mm.flush_rings = 0;
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
/* Compute new gpu domains and update invalidate/flush */
i915_gem_object_set_to_gpu_domain(obj, ring);
}
if (dev->invalidate_domains | dev->flush_domains) {
#if WATCH_EXEC
DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
__func__,
dev->invalidate_domains,
dev->flush_domains);
#endif
i915_gem_flush(dev, file,
dev->invalidate_domains,
dev->flush_domains,
dev_priv->mm.flush_rings);
}
ret = i915_gem_execbuffer_move_to_gpu(dev, file, ring,
object_list, args->buffer_count);
if (ret)
goto err;
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
@ -4043,8 +4065,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
alignment = i915_gem_get_gtt_alignment(obj);
if (obj_priv->gtt_offset & (alignment - 1)) {
WARN(obj_priv->pin_count,
"bo is already pinned with incorrect alignment:"
" offset=%x, req.alignment=%x\n",
"bo is already pinned with incorrect alignment: offset=%x, req.alignment=%x\n",
obj_priv->gtt_offset, alignment);
ret = i915_gem_object_unbind(obj);
if (ret)
@ -4856,17 +4877,24 @@ i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
struct drm_file *file_priv)
{
struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
void *obj_addr;
int ret;
char __user *user_data;
void *vaddr = obj_priv->phys_obj->handle->vaddr + args->offset;
char __user *user_data = (char __user *) (uintptr_t) args->data_ptr;
user_data = (char __user *) (uintptr_t) args->data_ptr;
obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
DRM_DEBUG_DRIVER("vaddr %p, %lld\n", vaddr, args->size);
DRM_DEBUG_DRIVER("obj_addr %p, %lld\n", obj_addr, args->size);
ret = copy_from_user(obj_addr, user_data, args->size);
if (ret)
return -EFAULT;
if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) {
unsigned long unwritten;
/* The physical object once assigned is fixed for the lifetime
* of the obj, so we can safely drop the lock and continue
* to access vaddr.
*/
mutex_unlock(&dev->struct_mutex);
unwritten = copy_from_user(vaddr, user_data, args->size);
mutex_lock(&dev->struct_mutex);
if (unwritten)
return -EFAULT;
}
drm_agp_chipset_flush(dev);
return 0;
@ -4900,9 +4928,7 @@ i915_gpu_is_active(struct drm_device *dev)
int lists_empty;
lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
list_empty(&dev_priv->render_ring.active_list) &&
list_empty(&dev_priv->bsd_ring.active_list) &&
list_empty(&dev_priv->blt_ring.active_list);
list_empty(&dev_priv->mm.active_list);
return !lists_empty;
}

8
drivers/gpu/drm/i915/i915_gem_evict.c
View File

@ -165,9 +165,7 @@ i915_gem_evict_everything(struct drm_device *dev)
lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
list_empty(&dev_priv->mm.flushing_list) &&
list_empty(&dev_priv->render_ring.active_list) &&
list_empty(&dev_priv->bsd_ring.active_list) &&
list_empty(&dev_priv->blt_ring.active_list));
list_empty(&dev_priv->mm.active_list));
if (lists_empty)
return -ENOSPC;
@ -184,9 +182,7 @@ i915_gem_evict_everything(struct drm_device *dev)
lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
list_empty(&dev_priv->mm.flushing_list) &&
list_empty(&dev_priv->render_ring.active_list) &&
list_empty(&dev_priv->bsd_ring.active_list) &&
list_empty(&dev_priv->blt_ring.active_list));
list_empty(&dev_priv->mm.active_list));
BUG_ON(!lists_empty);
return 0;

4
drivers/gpu/drm/i915/i915_suspend.c
View File

@ -862,8 +862,10 @@ int i915_restore_state(struct drm_device *dev)
/* Clock gating state */
intel_init_clock_gating(dev);
if (HAS_PCH_SPLIT(dev))
if (HAS_PCH_SPLIT(dev)) {
ironlake_enable_drps(dev);
intel_init_emon(dev);
}
/* Cache mode state */
I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);

70
drivers/gpu/drm/i915/intel_display.c
View File

@ -1681,6 +1681,37 @@ static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
udelay(500);
}
static void intel_fdi_normal_train(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
u32 reg, temp;
/* enable normal train */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
I915_WRITE(reg, temp);
reg = FDI_RX_CTL(pipe);
temp = I915_READ(reg);
if (HAS_PCH_CPT(dev)) {
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
temp |= FDI_LINK_TRAIN_NORMAL_CPT;
} else {
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_NONE;
}
I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
/* wait one idle pattern time */
POSTING_READ(reg);
udelay(1000);
}
/* The FDI link training functions for ILK/Ibexpeak. */
static void ironlake_fdi_link_train(struct drm_crtc *crtc)
{
@ -1767,27 +1798,6 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc)
DRM_DEBUG_KMS("FDI train done\n");
/* enable normal train */
reg = FDI_TX_CTL(pipe);
temp = I915_READ(reg);
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
I915_WRITE(reg, temp);
reg = FDI_RX_CTL(pipe);
temp = I915_READ(reg);
if (HAS_PCH_CPT(dev)) {
temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
temp |= FDI_LINK_TRAIN_NORMAL_CPT;
} else {
temp &= ~FDI_LINK_TRAIN_NONE;
temp |= FDI_LINK_TRAIN_NONE;
}
I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
/* wait one idle pattern time */
POSTING_READ(reg);
udelay(1000);
}
static const int const snb_b_fdi_train_param [] = {
@ -2090,6 +2100,8 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe)));
intel_fdi_normal_train(crtc);
/* For PCH DP, enable TRANS_DP_CTL */
if (HAS_PCH_CPT(dev) &&
intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
@ -2200,9 +2212,10 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
udelay(100);
/* Ironlake workaround, disable clock pointer after downing FDI */
I915_WRITE(FDI_RX_CHICKEN(pipe),
I915_READ(FDI_RX_CHICKEN(pipe) &
~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
if (HAS_PCH_IBX(dev))
I915_WRITE(FDI_RX_CHICKEN(pipe),
I915_READ(FDI_RX_CHICKEN(pipe) &
~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
/* still set train pattern 1 */
reg = FDI_TX_CTL(pipe);
@ -5581,20 +5594,19 @@ void ironlake_enable_drps(struct drm_device *dev)
fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
MEMMODE_FSTART_SHIFT;
fstart = fmax;
vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
PXVFREQ_PX_SHIFT;
dev_priv->fmax = fstart; /* IPS callback will increase this */
dev_priv->fmax = fmax; /* IPS callback will increase this */
dev_priv->fstart = fstart;
dev_priv->max_delay = fmax;
dev_priv->max_delay = fstart;
dev_priv->min_delay = fmin;
dev_priv->cur_delay = fstart;
DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin,
fstart);
DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
fmax, fmin, fstart);
I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);

2
drivers/gpu/drm/i915/intel_dp.c
View File

@ -1517,7 +1517,7 @@ g4x_dp_detect(struct intel_dp *intel_dp)
status = connector_status_connected;
}
return bit;
return status;
}
/**

1
drivers/gpu/drm/i915/intel_drv.h
View File

@ -296,6 +296,7 @@ extern void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
extern void intel_init_clock_gating(struct drm_device *dev);
extern void ironlake_enable_drps(struct drm_device *dev);
extern void ironlake_disable_drps(struct drm_device *dev);
extern void intel_init_emon(struct drm_device *dev);
extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
struct drm_gem_object *obj,

16
drivers/gpu/drm/i915/intel_lvds.c
View File

@ -481,11 +481,8 @@ static int intel_lvds_get_modes(struct drm_connector *connector)
struct drm_device *dev = connector->dev;
struct drm_display_mode *mode;
if (intel_lvds->edid) {
drm_mode_connector_update_edid_property(connector,
intel_lvds->edid);
if (intel_lvds->edid)
return drm_add_edid_modes(connector, intel_lvds->edid);
}
mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode);
if (mode == 0)
@ -939,7 +936,16 @@ void intel_lvds_init(struct drm_device *dev)
*/
intel_lvds->edid = drm_get_edid(connector,
&dev_priv->gmbus[pin].adapter);
if (intel_lvds->edid) {
if (drm_add_edid_modes(connector,
intel_lvds->edid)) {
drm_mode_connector_update_edid_property(connector,
intel_lvds->edid);
} else {
kfree(intel_lvds->edid);
intel_lvds->edid = NULL;
}
}
if (!intel_lvds->edid) {
/* Didn't get an EDID, so
* Set wide sync ranges so we get all modes

2
drivers/gpu/drm/i915/intel_opregion.c
View File

@ -512,6 +512,6 @@ int intel_opregion_setup(struct drm_device *dev)
return 0;
err_out:
iounmap(opregion->header);
iounmap(base);
return err;
}

4
drivers/gpu/drm/i915/intel_overlay.c
View File

@ -946,7 +946,9 @@ static int check_overlay_src(struct drm_device *dev,
{
int uv_hscale = uv_hsubsampling(rec->flags);
int uv_vscale = uv_vsubsampling(rec->flags);
u32 stride_mask, depth, tmp;
u32 stride_mask;
int depth;
u32 tmp;
/* check src dimensions */
if (IS_845G(dev) || IS_I830(dev)) {

129
drivers/gpu/drm/i915/intel_ringbuffer.c
View File

@ -177,7 +177,7 @@ static int init_ring_common(struct drm_device *dev,
I915_WRITE_CTL(ring,
((ring->gem_object->size - PAGE_SIZE) & RING_NR_PAGES)
| RING_NO_REPORT | RING_VALID);
| RING_REPORT_64K | RING_VALID);
head = I915_READ_HEAD(ring) & HEAD_ADDR;
/* If the head is still not zero, the ring is dead */
@ -654,6 +654,10 @@ void intel_cleanup_ring_buffer(struct drm_device *dev,
i915_gem_object_unpin(ring->gem_object);
drm_gem_object_unreference(ring->gem_object);
ring->gem_object = NULL;
if (ring->cleanup)
ring->cleanup(ring);
cleanup_status_page(dev, ring);
}
@ -688,6 +692,17 @@ int intel_wait_ring_buffer(struct drm_device *dev,
{
unsigned long end;
drm_i915_private_t *dev_priv = dev->dev_private;
u32 head;
head = intel_read_status_page(ring, 4);
if (head) {
ring->head = head & HEAD_ADDR;
ring->space = ring->head - (ring->tail + 8);
if (ring->space < 0)
ring->space += ring->size;
if (ring->space >= n)
return 0;
}
trace_i915_ring_wait_begin (dev);
end = jiffies + 3 * HZ;
@ -854,19 +869,125 @@ blt_ring_put_user_irq(struct drm_device *dev,
/* do nothing */
}
/* Workaround for some stepping of SNB,
* each time when BLT engine ring tail moved,
* the first command in the ring to be parsed
* should be MI_BATCH_BUFFER_START
*/
#define NEED_BLT_WORKAROUND(dev) \
(IS_GEN6(dev) && (dev->pdev->revision < 8))
static inline struct drm_i915_gem_object *
to_blt_workaround(struct intel_ring_buffer *ring)
{
return ring->private;
}
static int blt_ring_init(struct drm_device *dev,
struct intel_ring_buffer *ring)
{
if (NEED_BLT_WORKAROUND(dev)) {
struct drm_i915_gem_object *obj;
u32 __iomem *ptr;
int ret;
obj = to_intel_bo(i915_gem_alloc_object(dev, 4096));
if (obj == NULL)
return -ENOMEM;
ret = i915_gem_object_pin(&obj->base, 4096);
if (ret) {
drm_gem_object_unreference(&obj->base);
return ret;
}
ptr = kmap(obj->pages[0]);
iowrite32(MI_BATCH_BUFFER_END, ptr);
iowrite32(MI_NOOP, ptr+1);
kunmap(obj->pages[0]);
ret = i915_gem_object_set_to_gtt_domain(&obj->base, false);
if (ret) {
i915_gem_object_unpin(&obj->base);
drm_gem_object_unreference(&obj->base);
return ret;
}
ring->private = obj;
}
return init_ring_common(dev, ring);
}
static void blt_ring_begin(struct drm_device *dev,
struct intel_ring_buffer *ring,
int num_dwords)
{
if (ring->private) {
intel_ring_begin(dev, ring, num_dwords+2);
intel_ring_emit(dev, ring, MI_BATCH_BUFFER_START);
intel_ring_emit(dev, ring, to_blt_workaround(ring)->gtt_offset);
} else
intel_ring_begin(dev, ring, 4);
}
static void blt_ring_flush(struct drm_device *dev,
struct intel_ring_buffer *ring,
u32 invalidate_domains,
u32 flush_domains)
{
blt_ring_begin(dev, ring, 4);
intel_ring_emit(dev, ring, MI_FLUSH_DW);
intel_ring_emit(dev, ring, 0);
intel_ring_emit(dev, ring, 0);
intel_ring_emit(dev, ring, 0);
intel_ring_advance(dev, ring);
}
static u32
blt_ring_add_request(struct drm_device *dev,
struct intel_ring_buffer *ring,
u32 flush_domains)
{
u32 seqno = i915_gem_get_seqno(dev);
blt_ring_begin(dev, ring, 4);
intel_ring_emit(dev, ring, MI_STORE_DWORD_INDEX);
intel_ring_emit(dev, ring,
I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
intel_ring_emit(dev, ring, seqno);
intel_ring_emit(dev, ring, MI_USER_INTERRUPT);
intel_ring_advance(dev, ring);
DRM_DEBUG_DRIVER("%s %d\n", ring->name, seqno);
return seqno;
}
static void blt_ring_cleanup(struct intel_ring_buffer *ring)
{
if (!ring->private)
return;
i915_gem_object_unpin(ring->private);
drm_gem_object_unreference(ring->private);
ring->private = NULL;
}
static const struct intel_ring_buffer gen6_blt_ring = {
.name = "blt ring",
.id = RING_BLT,
.mmio_base = BLT_RING_BASE,
.size = 32 * PAGE_SIZE,
.init = init_ring_common,
.init = blt_ring_init,
.write_tail = ring_write_tail,
.flush = gen6_ring_flush,
.add_request = ring_add_request,
.flush = blt_ring_flush,
.add_request = blt_ring_add_request,
.get_seqno = ring_status_page_get_seqno,
.user_irq_get = blt_ring_get_user_irq,
.user_irq_put = blt_ring_put_user_irq,
.dispatch_gem_execbuffer = gen6_ring_dispatch_gem_execbuffer,
.cleanup = blt_ring_cleanup,
};
int intel_init_render_ring_buffer(struct drm_device *dev)

3
drivers/gpu/drm/i915/intel_ringbuffer.h
View File

@ -63,6 +63,7 @@ struct intel_ring_buffer {
struct drm_i915_gem_execbuffer2 *exec,
struct drm_clip_rect *cliprects,
uint64_t exec_offset);
void (*cleanup)(struct intel_ring_buffer *ring);
/**
* List of objects currently involved in rendering from the
@ -98,6 +99,8 @@ struct intel_ring_buffer {
wait_queue_head_t irq_queue;
drm_local_map_t map;
void *private;
};
static inline u32

8
drivers/gpu/drm/radeon/evergreen.c
View File

@ -2033,7 +2033,7 @@ int evergreen_irq_set(struct radeon_device *rdev)
u32 grbm_int_cntl = 0;
if (!rdev->irq.installed) {
WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
return -EINVAL;
}
/* don't enable anything if the ih is disabled */
@ -2295,6 +2295,7 @@ int evergreen_irq_process(struct radeon_device *rdev)
case 0: /* D1 vblank */
if (disp_int & LB_D1_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 0);
rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int &= ~LB_D1_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D1 vblank\n");
@ -2316,6 +2317,7 @@ int evergreen_irq_process(struct radeon_device *rdev)
case 0: /* D2 vblank */
if (disp_int_cont & LB_D2_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 1);
rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont &= ~LB_D2_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D2 vblank\n");
@ -2337,6 +2339,7 @@ int evergreen_irq_process(struct radeon_device *rdev)
case 0: /* D3 vblank */
if (disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 2);
rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont2 &= ~LB_D3_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D3 vblank\n");
@ -2358,6 +2361,7 @@ int evergreen_irq_process(struct radeon_device *rdev)
case 0: /* D4 vblank */
if (disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 3);
rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont3 &= ~LB_D4_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D4 vblank\n");
@ -2379,6 +2383,7 @@ int evergreen_irq_process(struct radeon_device *rdev)
case 0: /* D5 vblank */
if (disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 4);
rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont4 &= ~LB_D5_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D5 vblank\n");
@ -2400,6 +2405,7 @@ int evergreen_irq_process(struct radeon_device *rdev)
case 0: /* D6 vblank */
if (disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) {
drm_handle_vblank(rdev->ddev, 5);
rdev->pm.vblank_sync = true;
wake_up(&rdev->irq.vblank_queue);
disp_int_cont5 &= ~LB_D6_VBLANK_INTERRUPT;
DRM_DEBUG("IH: D6 vblank\n");

4
drivers/gpu/drm/radeon/r100.c
View File

@ -442,7 +442,7 @@ int r100_pci_gart_init(struct radeon_device *rdev)
int r;
if (rdev->gart.table.ram.ptr) {
WARN(1, "R100 PCI GART already initialized.\n");
WARN(1, "R100 PCI GART already initialized\n");
return 0;
}
/* Initialize common gart structure */
@ -516,7 +516,7 @@ int r100_irq_set(struct radeon_device *rdev)
uint32_t tmp = 0;
if (!rdev->irq.installed) {
WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
WREG32(R_000040_GEN_INT_CNTL, 0);
return -EINVAL;
}

Some files were not shown because too many files have changed in this diff Show More