AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

m68knommu: introduce macros to simplify ColdFire GPIO table initialization

Browse Source 
We have very large tables in the ColdFire CPU GPIO setup code that essentially
boil down to 2 distinct types of GPIO pin initiaization. Using 2 macros we can
reduce these large tables to at most a dozen lines of setup code, and in quite
a few cases a single table entry.

Introduce these 2 macros into the existing mcfgpio.h header.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Steven King <sfking@fdwdc.com>
This commit is contained in:
Greg Ungerer 2012-04-16 15:59:29 +10:00
parent f106eac91e
commit c269d4efaa
1 changed files with 54 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

54
arch/m68k/include/asm/mcfgpio.h
View File

@ -37,4 +37,58 @@ void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int);
int mcf_gpio_request(struct gpio_chip *, unsigned);
void mcf_gpio_free(struct gpio_chip *, unsigned);
/*
* Define macros to ease the pain of setting up the GPIO tables. There
* are two cases we need to deal with here, they cover all currently
* available ColdFire GPIO hardware. There are of course minor differences
* in the layout and number of bits in each ColdFire part, but the macros
* take all that in.
*
* Firstly is the conventional GPIO registers where we toggle individual
* bits in a register, preserving the other bits in the register. For
* lack of a better term I have called this the slow method.
*/
#define MCFGPS(mlabel, mbase, mngpio, mpddr, mpodr, mppdr) \
{ \
.gpio_chip = { \
.label = #mlabel, \
.request = mcf_gpio_request, \
.free = mcf_gpio_free, \
.direction_input = mcf_gpio_direction_input, \
.direction_output = mcf_gpio_direction_output,\
.get = mcf_gpio_get_value, \
.set = mcf_gpio_set_value, \
.base = mbase, \
.ngpio = mngpio, \
}, \
.pddr = (void __iomem *) mpddr, \
.podr = (void __iomem *) mpodr, \
.ppdr = (void __iomem *) mppdr, \
}
/*
* Secondly is the faster case, where we have set and clear registers
* that allow us to set or clear a bit with a single write, not having
* to worry about preserving other bits.
*/
#define MCFGPF(mlabel, mbase, mngpio) \
{ \
.gpio_chip = { \
.label = #mlabel, \
.request = mcf_gpio_request, \
.free = mcf_gpio_free, \
.direction_input = mcf_gpio_direction_input, \
.direction_output = mcf_gpio_direction_output,\
.get = mcf_gpio_get_value, \
.set = mcf_gpio_set_value_fast, \
.base = mbase, \
.ngpio = mngpio, \
}, \
.pddr = (void __iomem *) MCFGPIO_PDDR_##mlabel, \
.podr = (void __iomem *) MCFGPIO_PODR_##mlabel, \
.ppdr = (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \
.setr = (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \
.clrr = (void __iomem *) MCFGPIO_PCLRR_##mlabel, \
}
#endif