AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

PM / OPP: Reorganize _generic_set_opp_regulator()

Browse Source 
The code was overly complicated here because of the limitations that we
had with RCUs (Couldn't use opp-table and OPPs outside RCU protected
section and can't call sleep-able routines from within that). But that
is long gone now.

Reorganize _generic_set_opp_regulator() in order to avoid using "struct
dev_pm_set_opp_data" and copying data into it for the case where
opp_table->set_opp is not set.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This commit is contained in:
Viresh Kumar 2017-05-23 09:32:10 +05:30 committed by Rafael J. Wysocki
parent 41f1830f5a
commit c74b32fadc
1 changed files with 36 additions and 41 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

77
drivers/base/power/opp/core.c
View File

@ -543,17 +543,18 @@ _generic_set_opp_clk_only(struct device *dev, struct clk *clk,
return ret;
}
static int _generic_set_opp(struct dev_pm_set_opp_data *data)
static int _generic_set_opp_regulator(const struct opp_table *opp_table,
struct device *dev,
unsigned long old_freq,
unsigned long freq,
struct dev_pm_opp_supply *old_supply,
struct dev_pm_opp_supply *new_supply)
{
struct dev_pm_opp_supply *old_supply = data->old_opp.supplies;
struct dev_pm_opp_supply *new_supply = data->new_opp.supplies;
unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate;
struct regulator *reg = data->regulators[0];
struct device *dev= data->dev;
struct regulator *reg = opp_table->regulators[0];
int ret;
/* This function only supports single regulator per device */
if (WARN_ON(data->regulator_count > 1)) {
if (WARN_ON(opp_table->regulator_count > 1)) {
dev_err(dev, "multiple regulators are not supported\n");
return -EINVAL;
}
@ -566,7 +567,7 @@ static int _generic_set_opp(struct dev_pm_set_opp_data *data)
}
/* Change frequency */
ret = _generic_set_opp_clk_only(dev, data->clk, old_freq, freq);
ret = _generic_set_opp_clk_only(dev, opp_table->clk, old_freq, freq);
if (ret)
goto restore_voltage;
@ -580,12 +581,12 @@ static int _generic_set_opp(struct dev_pm_set_opp_data *data)
return 0;
restore_freq:
if (_generic_set_opp_clk_only(dev, data->clk, freq, old_freq))
if (_generic_set_opp_clk_only(dev, opp_table->clk, freq, old_freq))
dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n",
__func__, old_freq);
restore_voltage:
/* This shouldn't harm even if the voltages weren't updated earlier */
if (old_supply->u_volt)
if (old_supply)
_set_opp_voltage(dev, reg, old_supply);
return ret;
@ -603,10 +604,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
{
struct opp_table *opp_table;
unsigned long freq, old_freq;
int (*set_opp)(struct dev_pm_set_opp_data *data);
struct dev_pm_opp *old_opp, *opp;
struct regulator **regulators;
struct dev_pm_set_opp_data *data;
struct clk *clk;
int ret, size;
@ -661,38 +659,35 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__,
old_freq, freq);
regulators = opp_table->regulators;
/* Only frequency scaling */
if (!regulators) {
if (!opp_table->regulators) {
ret = _generic_set_opp_clk_only(dev, clk, old_freq, freq);
goto put_opps;
} else if (!opp_table->set_opp) {
ret = _generic_set_opp_regulator(opp_table, dev, old_freq, freq,
IS_ERR(old_opp) ? NULL : old_opp->supplies,
opp->supplies);
} else {
struct dev_pm_set_opp_data *data;
data = opp_table->set_opp_data;
data->regulators = opp_table->regulators;
data->regulator_count = opp_table->regulator_count;
data->clk = clk;
data->dev = dev;
data->old_opp.rate = old_freq;
size = sizeof(*opp->supplies) * opp_table->regulator_count;
if (IS_ERR(old_opp))
memset(data->old_opp.supplies, 0, size);
else
memcpy(data->old_opp.supplies, old_opp->supplies, size);
data->new_opp.rate = freq;
memcpy(data->new_opp.supplies, opp->supplies, size);
ret = opp_table->set_opp(data);
}
if (opp_table->set_opp)
set_opp = opp_table->set_opp;
else
set_opp = _generic_set_opp;
data = opp_table->set_opp_data;
data->regulators = regulators;
data->regulator_count = opp_table->regulator_count;
data->clk = clk;
data->dev = dev;
data->old_opp.rate = old_freq;
size = sizeof(*opp->supplies) * opp_table->regulator_count;
if (IS_ERR(old_opp))
memset(data->old_opp.supplies, 0, size);
else
memcpy(data->old_opp.supplies, old_opp->supplies, size);
data->new_opp.rate = freq;
memcpy(data->new_opp.supplies, opp->supplies, size);
ret = set_opp(data);
put_opps:
dev_pm_opp_put(opp);
put_old_opp:
if (!IS_ERR(old_opp))