forked from luck/tmp_suning_uos_patched
Doc/DT: Add DT binding documentation for OMAP DSS
Add device tree bindings for OMAP Display Subsystem for the following SoCs: OMAP2, OMAP3, OMAP4. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com>
This commit is contained in:
Tomi Valkeinen
parent
6e7efe4eb8
commit
cbab579bf8
211
Documentation/devicetree/bindings/video/ti,omap-dss.txt
Normal file
211
Documentation/devicetree/bindings/video/ti,omap-dss.txt
Normal file
|
|
@ -0,0 +1,211 @@
|
|||
Texas Instruments OMAP Display Subsystem
|
||||
========================================
|
||||
|
||||
Generic Description
|
||||
-------------------
|
||||
|
||||
This document is a generic description of the OMAP Display Subsystem bindings.
|
||||
Binding details for each OMAP SoC version are described in respective binding
|
||||
documentation.
|
||||
|
||||
The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and
|
||||
a number of encoder modules. All DSS versions contain DSS Core and DISPC, but
|
||||
the encoder modules vary.
|
||||
|
||||
The DSS Core is the parent of the other DSS modules, and manages clock routing,
|
||||
integration to the SoC, etc.
|
||||
|
||||
DISPC is the display controller, which reads pixels from the memory and outputs
|
||||
a RGB pixel stream to encoders.
|
||||
|
||||
The encoder modules encode the received RGB pixel stream to a video output like
|
||||
HDMI, MIPI DPI, etc.
|
||||
|
||||
Video Ports
|
||||
-----------
|
||||
|
||||
The DSS Core and the encoders have video port outputs. The structure of the
|
||||
video ports is described in Documentation/devicetree/bindings/video/video-
|
||||
ports.txt, and the properties for the ports and endpoints for each encoder are
|
||||
described in the SoC's DSS binding documentation.
|
||||
|
||||
The video ports are used to describe the connections to external hardware, like
|
||||
panels or external encoders.
|
||||
|
||||
Aliases
|
||||
-------
|
||||
|
||||
The board dts file may define aliases for displays to assign "displayX" style
|
||||
name for each display. If no aliases are defined, a semi-random number is used
|
||||
for the display.
|
||||
|
||||
Example
|
||||
-------
|
||||
|
||||
A shortened example of the DSS description for OMAP4, with non-relevant parts
|
||||
removed, defined in omap4.dtsi:
|
||||
|
||||
dss: dss@58000000 {
|
||||
compatible = "ti,omap4-dss";
|
||||
reg = <0x58000000 0x80>;
|
||||
status = "disabled";
|
||||
ti,hwmods = "dss_core";
|
||||
clocks = <&dss_dss_clk>;
|
||||
clock-names = "fck";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
dispc@58001000 {
|
||||
compatible = "ti,omap4-dispc";
|
||||
reg = <0x58001000 0x1000>;
|
||||
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "dss_dispc";
|
||||
clocks = <&dss_dss_clk>;
|
||||
clock-names = "fck";
|
||||
};
|
||||
|
||||
hdmi: encoder@58006000 {
|
||||
compatible = "ti,omap4-hdmi";
|
||||
reg = <0x58006000 0x200>,
|
||||
<0x58006200 0x100>,
|
||||
<0x58006300 0x100>,
|
||||
<0x58006400 0x1000>;
|
||||
reg-names = "wp", "pll", "phy", "core";
|
||||
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
||||
status = "disabled";
|
||||
ti,hwmods = "dss_hdmi";
|
||||
clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
|
||||
clock-names = "fck", "sys_clk";
|
||||
};
|
||||
};
|
||||
|
||||
A shortened example of the board description for OMAP4 Panda board, defined in
|
||||
omap4-panda.dts.
|
||||
|
||||
The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
|
||||
chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
|
||||
shifter). The video pipelines for the connectors are formed as follows:
|
||||
|
||||
DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
|
||||
OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
display0 = &dvi0;
|
||||
display1 = &hdmi0;
|
||||
};
|
||||
|
||||
tfp410: encoder@0 {
|
||||
compatible = "ti,tfp410";
|
||||
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* 0, power-down */
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tfp410_pins>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
tfp410_in: endpoint@0 {
|
||||
remote-endpoint = <&dpi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
tfp410_out: endpoint@0 {
|
||||
remote-endpoint = <&dvi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dvi0: connector@0 {
|
||||
compatible = "dvi-connector";
|
||||
label = "dvi";
|
||||
|
||||
i2c-bus = <&i2c3>;
|
||||
|
||||
port {
|
||||
dvi_connector_in: endpoint {
|
||||
remote-endpoint = <&tfp410_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
tpd12s015: encoder@1 {
|
||||
compatible = "ti,tpd12s015";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tpd12s015_pins>;
|
||||
|
||||
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
|
||||
<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
|
||||
<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
tpd12s015_in: endpoint@0 {
|
||||
remote-endpoint = <&hdmi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
tpd12s015_out: endpoint@0 {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi0: connector@1 {
|
||||
compatible = "hdmi-connector";
|
||||
label = "hdmi";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&tpd12s015_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dss_dpi_pins>;
|
||||
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&tfp410_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
status = "ok";
|
||||
vdda-supply = <&vdac>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dss_hdmi_pins>;
|
||||
|
||||
port {
|
||||
hdmi_out: endpoint {
|
||||
remote-endpoint = <&tpd12s015_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
54
Documentation/devicetree/bindings/video/ti,omap2-dss.txt
Normal file
54
Documentation/devicetree/bindings/video/ti,omap2-dss.txt
Normal file
|
|
@ -0,0 +1,54 @@
|
|||
Texas Instruments OMAP2 Display Subsystem
|
||||
=========================================
|
||||
|
||||
See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
|
||||
description about OMAP Display Subsystem bindings.
|
||||
|
||||
DSS Core
|
||||
--------
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap2-dss"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_core"
|
||||
|
||||
Optional nodes:
|
||||
- Video port for DPI output
|
||||
|
||||
DPI Endpoint required properties:
|
||||
- data-lines: number of lines used
|
||||
|
||||
|
||||
DISPC
|
||||
-----
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap2-dispc"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_dispc"
|
||||
- interrupts: the DISPC interrupt
|
||||
|
||||
|
||||
RFBI
|
||||
----
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap2-rfbi"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_rfbi"
|
||||
|
||||
|
||||
VENC
|
||||
----
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap2-venc"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_venc"
|
||||
- vdda-supply: power supply for DAC
|
||||
|
||||
VENC Endpoint required properties:
|
||||
|
||||
Required properties:
|
||||
- ti,invert-polarity: invert the polarity of the video signal
|
||||
- ti,channels: 1 for composite, 2 for s-video
|
||||
83
Documentation/devicetree/bindings/video/ti,omap3-dss.txt
Normal file
83
Documentation/devicetree/bindings/video/ti,omap3-dss.txt
Normal file
|
|
@ -0,0 +1,83 @@
|
|||
Texas Instruments OMAP3 Display Subsystem
|
||||
=========================================
|
||||
|
||||
See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
|
||||
description about OMAP Display Subsystem bindings.
|
||||
|
||||
DSS Core
|
||||
--------
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap3-dss"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_core"
|
||||
- clocks: handle to fclk
|
||||
- clock-names: "fck"
|
||||
|
||||
Optional nodes:
|
||||
- Video ports:
|
||||
- Port 0: DPI output
|
||||
- Port 1: SDI output
|
||||
|
||||
DPI Endpoint required properties:
|
||||
- data-lines: number of lines used
|
||||
|
||||
SDI Endpoint required properties:
|
||||
- datapairs: number of datapairs used
|
||||
|
||||
|
||||
DISPC
|
||||
-----
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap3-dispc"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_dispc"
|
||||
- interrupts: the DISPC interrupt
|
||||
- clocks: handle to fclk
|
||||
- clock-names: "fck"
|
||||
|
||||
|
||||
RFBI
|
||||
----
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap3-rfbi"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_rfbi"
|
||||
- clocks: handles to fclk and iclk
|
||||
- clock-names: "fck", "ick"
|
||||
|
||||
|
||||
VENC
|
||||
----
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap3-venc"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_venc"
|
||||
- vdda-supply: power supply for DAC
|
||||
- clocks: handle to fclk
|
||||
- clock-names: "fck"
|
||||
|
||||
VENC Endpoint required properties:
|
||||
- ti,invert-polarity: invert the polarity of the video signal
|
||||
- ti,channels: 1 for composite, 2 for s-video
|
||||
|
||||
|
||||
DSI
|
||||
---
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap3-dsi"
|
||||
- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
|
||||
- reg-names: "proto", "phy", "pll"
|
||||
- interrupts: the DSI interrupt line
|
||||
- ti,hwmods: "dss_dsi1"
|
||||
- vdd-supply: power supply for DSI
|
||||
- clocks: handles to fclk and pll clock
|
||||
- clock-names: "fck", "sys_clk"
|
||||
|
||||
DSI Endpoint required properties:
|
||||
- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
|
||||
DATA1+, DATA1-, ...
|
||||
111
Documentation/devicetree/bindings/video/ti,omap4-dss.txt
Normal file
111
Documentation/devicetree/bindings/video/ti,omap4-dss.txt
Normal file
|
|
@ -0,0 +1,111 @@
|
|||
Texas Instruments OMAP4 Display Subsystem
|
||||
=========================================
|
||||
|
||||
See Documentation/devicetree/bindings/video/ti,omap-dss.txt for generic
|
||||
description about OMAP Display Subsystem bindings.
|
||||
|
||||
DSS Core
|
||||
--------
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap4-dss"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_core"
|
||||
- clocks: handle to fclk
|
||||
- clock-names: "fck"
|
||||
|
||||
Required nodes:
|
||||
- DISPC
|
||||
|
||||
Optional nodes:
|
||||
- DSS Submodules: RFBI, VENC, DSI, HDMI
|
||||
- Video port for DPI output
|
||||
|
||||
DPI Endpoint required properties:
|
||||
- data-lines: number of lines used
|
||||
|
||||
|
||||
DISPC
|
||||
-----
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap4-dispc"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_dispc"
|
||||
- interrupts: the DISPC interrupt
|
||||
- clocks: handle to fclk
|
||||
- clock-names: "fck"
|
||||
|
||||
|
||||
RFBI
|
||||
----
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap4-rfbi"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_rfbi"
|
||||
- clocks: handles to fclk and iclk
|
||||
- clock-names: "fck", "ick"
|
||||
|
||||
Optional nodes:
|
||||
- Video port for RFBI output
|
||||
- RFBI controlled peripherals
|
||||
|
||||
|
||||
VENC
|
||||
----
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap4-venc"
|
||||
- reg: address and length of the register space
|
||||
- ti,hwmods: "dss_venc"
|
||||
- vdda-supply: power supply for DAC
|
||||
- clocks: handle to fclk
|
||||
- clock-names: "fck"
|
||||
|
||||
Optional nodes:
|
||||
- Video port for VENC output
|
||||
|
||||
VENC Endpoint required properties:
|
||||
- ti,invert-polarity: invert the polarity of the video signal
|
||||
- ti,channels: 1 for composite, 2 for s-video
|
||||
|
||||
|
||||
DSI
|
||||
---
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap4-dsi"
|
||||
- reg: addresses and lengths of the register spaces for 'proto', 'phy' and 'pll'
|
||||
- reg-names: "proto", "phy", "pll"
|
||||
- interrupts: the DSI interrupt line
|
||||
- ti,hwmods: "dss_dsi1" or "dss_dsi2"
|
||||
- vdd-supply: power supply for DSI
|
||||
- clocks: handles to fclk and pll clock
|
||||
- clock-names: "fck", "sys_clk"
|
||||
|
||||
Optional nodes:
|
||||
- Video port for DSI output
|
||||
- DSI controlled peripherals
|
||||
|
||||
DSI Endpoint required properties:
|
||||
- lanes: list of pin numbers for the DSI lanes: CLK+, CLK-, DATA0+, DATA0-,
|
||||
DATA1+, DATA1-, ...
|
||||
|
||||
|
||||
HDMI
|
||||
----
|
||||
|
||||
Required properties:
|
||||
- compatible: "ti,omap4-hdmi"
|
||||
- reg: addresses and lengths of the register spaces for 'wp', 'pll', 'phy',
|
||||
'core'
|
||||
- reg-names: "wp", "pll", "phy", "core"
|
||||
- interrupts: the HDMI interrupt line
|
||||
- ti,hwmods: "dss_hdmi"
|
||||
- vdda-supply: vdda power supply
|
||||
- clocks: handles to fclk and pll clock
|
||||
- clock-names: "fck", "sys_clk"
|
||||
|
||||
Optional nodes:
|
||||
- Video port for HDMI output
|
||||
Loading…
Reference in New Issue
Block a user