AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

[NET]: Improve presentation of networking driver families.

Browse Source 
Suggestion from Sam Ravnborg <sam@ravnborg.org>

It causes all driver families to be displayed aligned immediately under the
main network drivers heading (in menuconfig/xconfig/gconfig) instead of
not being subordinate to (i.e., not indented) the Network device support
heading at all.
The improved network driver families are:
  token ring, wireless, PCMCIA, WAN, ATM, and S390.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Randy Dunlap 2005-07-27 13:04:35 -07:00 committed by David S. Miller
parent eaa1c5d059
commit cbcd2a4cca
1 changed files with 18 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
drivers/net/Kconfig
View File

@ -23,9 +23,12 @@ config NETDEVICES
If unsure, say Y.
# All the following symbols are dependent on NETDEVICES - do not repeat
# that for each of the symbols.
if NETDEVICES
config DUMMY
tristate "Dummy net driver support"
depends on NETDEVICES
---help---
This is essentially a bit-bucket device (i.e. traffic you send to
this device is consigned into oblivion) with a configurable IP
@ -45,7 +48,6 @@ config DUMMY
config BONDING
tristate "Bonding driver support"
depends on NETDEVICES
depends on INET
---help---
Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
@ -63,7 +65,6 @@ config BONDING
config EQUALIZER
tristate "EQL (serial line load balancing) support"
depends on NETDEVICES
---help---
If you have two serial connections to some other computer (this
usually requires two modems and two telephone lines) and you use
@ -83,7 +84,6 @@ config EQUALIZER
config TUN
tristate "Universal TUN/TAP device driver support"
depends on NETDEVICES
select CRC32
---help---
TUN/TAP provides packet reception and transmission for user space
@ -107,7 +107,7 @@ config TUN
config NET_SB1000
tristate "General Instruments Surfboard 1000"
depends on NETDEVICES && PNP
depends on PNP
---help---
This is a driver for the General Instrument (also known as
NextLevel) SURFboard 1000 internal
@ -129,16 +129,14 @@ config NET_SB1000
If you don't have this card, of course say N.
if NETDEVICES
source "drivers/net/arcnet/Kconfig"
endif
#
# Ethernet
#
menu "Ethernet (10 or 100Mbit)"
depends on NETDEVICES && !UML
depends on !UML
config NET_ETHERNET
bool "Ethernet (10 or 100Mbit)"
@ -1137,7 +1135,7 @@ config IBMLANA
config IBMVETH
tristate "IBM LAN Virtual Ethernet support"
depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES
depends on NET_ETHERNET && PPC_PSERIES
---help---
This driver supports virtual ethernet adapters on newer IBM iSeries
and pSeries systems.
@ -1760,7 +1758,7 @@ endmenu
#
menu "Ethernet (1000 Mbit)"
depends on NETDEVICES && !UML
depends on !UML
config ACENIC
tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
@ -2091,7 +2089,7 @@ endmenu
#
menu "Ethernet (10000 Mbit)"
depends on NETDEVICES && !UML
depends on !UML
config IXGB
tristate "Intel(R) PRO/10GbE support"
@ -2186,11 +2184,11 @@ source "drivers/s390/net/Kconfig"
config ISERIES_VETH
tristate "iSeries Virtual Ethernet driver support"
depends on NETDEVICES && PPC_ISERIES
depends on PPC_ISERIES
config FDDI
bool "FDDI driver support"
depends on NETDEVICES && (PCI || EISA)
depends on (PCI || EISA)
help
Fiber Distributed Data Interface is a high speed local area network
design; essentially a replacement for high speed Ethernet. FDDI can
@ -2239,7 +2237,7 @@ config SKFP
config HIPPI
bool "HIPPI driver support (EXPERIMENTAL)"
depends on NETDEVICES && EXPERIMENTAL && INET && PCI
depends on EXPERIMENTAL && INET && PCI
help
HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
@ -2271,7 +2269,7 @@ config ROADRUNNER_LARGE_RINGS
config PLIP
tristate "PLIP (parallel port) support"
depends on NETDEVICES && PARPORT
depends on PARPORT
---help---
PLIP (Parallel Line Internet Protocol) is used to create a
reasonably fast mini network consisting of two (or, rarely, more)
@ -2307,7 +2305,6 @@ config PLIP
config PPP
tristate "PPP (point-to-point protocol) support"
depends on NETDEVICES
---help---
PPP (Point to Point Protocol) is a newer and better SLIP. It serves
the same purpose: sending Internet traffic over telephone (and other
@ -2443,7 +2440,6 @@ config PPPOATM
config SLIP
tristate "SLIP (serial line) support"
depends on NETDEVICES
---help---
Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
connect to your Internet service provider or to connect to some
@ -2510,7 +2506,7 @@ config SLIP_MODE_SLIP6
config NET_FC
bool "Fibre Channel driver support"
depends on NETDEVICES && SCSI && PCI
depends on SCSI && PCI
help
Fibre Channel is a high speed serial protocol mainly used to connect
large storage devices to the computer; it is compatible with and
@ -2523,7 +2519,7 @@ config NET_FC
config SHAPER
tristate "Traffic Shaper (EXPERIMENTAL)"
depends on NETDEVICES && EXPERIMENTAL
depends on EXPERIMENTAL
---help---
The traffic shaper is a virtual network device that allows you to
limit the rate of outgoing data flow over some other network device.
@ -2544,11 +2540,13 @@ config SHAPER
config NETCONSOLE
tristate "Network console logging support (EXPERIMENTAL)"
depends on NETDEVICES && INET && EXPERIMENTAL
depends on INET && EXPERIMENTAL
---help---
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.txt> for details.
endif #NETDEVICES
config NETPOLL
def_bool NETCONSOLE