forked from luck/tmp_suning_uos_patched
i3c: master: fix for SETDASA and DAA process
This patch fix following issue. Controller slots blocked for devices with static_addr but no init_dyn_addr may limit the number of I3C devices on the bus which gets dynamic address in DAA. So instead of attaching all the devices with static_addr, now we only attach the devices which successfully complete SETDASA. For remaining devices with init_dyn_addr, i3c_master_add_i3c_dev_locked() will try to set requested dynamic address after DAA. Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-i3c/1598337109-14770-1-git-send-email-pthombar@cadence.com
This commit is contained in:
parent
9da36a7ec4
commit
cc3a392d69
|
@ -1373,7 +1373,9 @@ static int i3c_master_reattach_i3c_dev(struct i3c_dev_desc *dev,
|
|||
enum i3c_addr_slot_status status;
|
||||
int ret;
|
||||
|
||||
if (dev->info.dyn_addr != old_dyn_addr) {
|
||||
if (dev->info.dyn_addr != old_dyn_addr &&
|
||||
(!dev->boardinfo ||
|
||||
dev->info.dyn_addr != dev->boardinfo->init_dyn_addr)) {
|
||||
status = i3c_bus_get_addr_slot_status(&master->bus,
|
||||
dev->info.dyn_addr);
|
||||
if (status != I3C_ADDR_SLOT_FREE)
|
||||
|
@ -1432,33 +1434,49 @@ static void i3c_master_detach_i2c_dev(struct i2c_dev_desc *dev)
|
|||
master->ops->detach_i2c_dev(dev);
|
||||
}
|
||||
|
||||
static void i3c_master_pre_assign_dyn_addr(struct i3c_dev_desc *dev)
|
||||
static int i3c_master_early_i3c_dev_add(struct i3c_master_controller *master,
|
||||
struct i3c_dev_boardinfo *boardinfo)
|
||||
{
|
||||
struct i3c_master_controller *master = i3c_dev_get_master(dev);
|
||||
struct i3c_device_info info = {
|
||||
.static_addr = boardinfo->static_addr,
|
||||
};
|
||||
struct i3c_dev_desc *i3cdev;
|
||||
int ret;
|
||||
|
||||
if (!dev->boardinfo || !dev->boardinfo->init_dyn_addr ||
|
||||
!dev->boardinfo->static_addr)
|
||||
return;
|
||||
i3cdev = i3c_master_alloc_i3c_dev(master, &info);
|
||||
if (IS_ERR(i3cdev))
|
||||
return -ENOMEM;
|
||||
|
||||
ret = i3c_master_setdasa_locked(master, dev->info.static_addr,
|
||||
dev->boardinfo->init_dyn_addr);
|
||||
i3cdev->boardinfo = boardinfo;
|
||||
|
||||
ret = i3c_master_attach_i3c_dev(master, i3cdev);
|
||||
if (ret)
|
||||
return;
|
||||
goto err_free_dev;
|
||||
|
||||
dev->info.dyn_addr = dev->boardinfo->init_dyn_addr;
|
||||
ret = i3c_master_reattach_i3c_dev(dev, 0);
|
||||
ret = i3c_master_setdasa_locked(master, i3cdev->info.static_addr,
|
||||
i3cdev->boardinfo->init_dyn_addr);
|
||||
if (ret)
|
||||
goto err_detach_dev;
|
||||
|
||||
i3cdev->info.dyn_addr = i3cdev->boardinfo->init_dyn_addr;
|
||||
ret = i3c_master_reattach_i3c_dev(i3cdev, 0);
|
||||
if (ret)
|
||||
goto err_rstdaa;
|
||||
|
||||
ret = i3c_master_retrieve_dev_info(dev);
|
||||
ret = i3c_master_retrieve_dev_info(i3cdev);
|
||||
if (ret)
|
||||
goto err_rstdaa;
|
||||
|
||||
return;
|
||||
return 0;
|
||||
|
||||
err_rstdaa:
|
||||
i3c_master_rstdaa_locked(master, dev->boardinfo->init_dyn_addr);
|
||||
i3c_master_rstdaa_locked(master, i3cdev->boardinfo->init_dyn_addr);
|
||||
err_detach_dev:
|
||||
i3c_master_detach_i3c_dev(i3cdev);
|
||||
err_free_dev:
|
||||
i3c_master_free_i3c_dev(i3cdev);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void
|
||||
|
@ -1625,8 +1643,8 @@ static void i3c_master_detach_free_devs(struct i3c_master_controller *master)
|
|||
* This function is following all initialisation steps described in the I3C
|
||||
* specification:
|
||||
*
|
||||
* 1. Attach I2C and statically defined I3C devs to the master so that the
|
||||
* master can fill its internal device table appropriately
|
||||
* 1. Attach I2C devs to the master so that the master can fill its internal
|
||||
* device table appropriately
|
||||
*
|
||||
* 2. Call &i3c_master_controller_ops->bus_init() method to initialize
|
||||
* the master controller. That's usually where the bus mode is selected
|
||||
|
@ -1638,8 +1656,10 @@ static void i3c_master_detach_free_devs(struct i3c_master_controller *master)
|
|||
*
|
||||
* 4. Disable all slave events.
|
||||
*
|
||||
* 5. Pre-assign dynamic addresses requested by the FW with SETDASA for I3C
|
||||
* devices that have a static address
|
||||
* 5. Reserve address slots for I3C devices with init_dyn_addr. And if devices
|
||||
* also have static_addr, try to pre-assign dynamic addresses requested by
|
||||
* the FW with SETDASA and attach corresponding statically defined I3C
|
||||
* devices to the master.
|
||||
*
|
||||
* 6. Do a DAA (Dynamic Address Assignment) to assign dynamic addresses to all
|
||||
* remaining I3C devices
|
||||
|
@ -1653,7 +1673,6 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
|
|||
enum i3c_addr_slot_status status;
|
||||
struct i2c_dev_boardinfo *i2cboardinfo;
|
||||
struct i3c_dev_boardinfo *i3cboardinfo;
|
||||
struct i3c_dev_desc *i3cdev;
|
||||
struct i2c_dev_desc *i2cdev;
|
||||
int ret;
|
||||
|
||||
|
@ -1685,34 +1704,6 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
|
|||
goto err_detach_devs;
|
||||
}
|
||||
}
|
||||
list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
|
||||
struct i3c_device_info info = {
|
||||
.static_addr = i3cboardinfo->static_addr,
|
||||
};
|
||||
|
||||
if (i3cboardinfo->init_dyn_addr) {
|
||||
status = i3c_bus_get_addr_slot_status(&master->bus,
|
||||
i3cboardinfo->init_dyn_addr);
|
||||
if (status != I3C_ADDR_SLOT_FREE) {
|
||||
ret = -EBUSY;
|
||||
goto err_detach_devs;
|
||||
}
|
||||
}
|
||||
|
||||
i3cdev = i3c_master_alloc_i3c_dev(master, &info);
|
||||
if (IS_ERR(i3cdev)) {
|
||||
ret = PTR_ERR(i3cdev);
|
||||
goto err_detach_devs;
|
||||
}
|
||||
|
||||
i3cdev->boardinfo = i3cboardinfo;
|
||||
|
||||
ret = i3c_master_attach_i3c_dev(master, i3cdev);
|
||||
if (ret) {
|
||||
i3c_master_free_i3c_dev(i3cdev);
|
||||
goto err_detach_devs;
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* Now execute the controller specific ->bus_init() routine, which
|
||||
|
@ -1749,11 +1740,43 @@ static int i3c_master_bus_init(struct i3c_master_controller *master)
|
|||
goto err_bus_cleanup;
|
||||
|
||||
/*
|
||||
* Pre-assign dynamic address and retrieve device information if
|
||||
* needed.
|
||||
* Reserve init_dyn_addr first, and then try to pre-assign dynamic
|
||||
* address and retrieve device information if needed.
|
||||
* In case pre-assign dynamic address fails, setting dynamic address to
|
||||
* the requested init_dyn_addr is retried after DAA is done in
|
||||
* i3c_master_add_i3c_dev_locked().
|
||||
*/
|
||||
i3c_bus_for_each_i3cdev(&master->bus, i3cdev)
|
||||
i3c_master_pre_assign_dyn_addr(i3cdev);
|
||||
list_for_each_entry(i3cboardinfo, &master->boardinfo.i3c, node) {
|
||||
|
||||
/*
|
||||
* We don't reserve a dynamic address for devices that
|
||||
* don't explicitly request one.
|
||||
*/
|
||||
if (!i3cboardinfo->init_dyn_addr)
|
||||
continue;
|
||||
|
||||
ret = i3c_bus_get_addr_slot_status(&master->bus,
|
||||
i3cboardinfo->init_dyn_addr);
|
||||
if (ret != I3C_ADDR_SLOT_FREE) {
|
||||
ret = -EBUSY;
|
||||
goto err_rstdaa;
|
||||
}
|
||||
|
||||
i3c_bus_set_addr_slot_status(&master->bus,
|
||||
i3cboardinfo->init_dyn_addr,
|
||||
I3C_ADDR_SLOT_I3C_DEV);
|
||||
|
||||
/*
|
||||
* Only try to create/attach devices that have a static
|
||||
* address. Other devices will be created/attached when
|
||||
* DAA happens, and the requested dynamic address will
|
||||
* be set using SETNEWDA once those devices become
|
||||
* addressable.
|
||||
*/
|
||||
|
||||
if (i3cboardinfo->static_addr)
|
||||
i3c_master_early_i3c_dev_add(master, i3cboardinfo);
|
||||
}
|
||||
|
||||
ret = i3c_master_do_daa(master);
|
||||
if (ret)
|
||||
|
|
Loading…
Reference in New Issue
Block a user