forked from luck/tmp_suning_uos_patched
ata: Add support for the Tegra124 SATA controller
This adds support for the integrated AHCI-compliant Serial ATA controller present on the NVIDIA Tegra124 system-on-chip. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org>
This commit is contained in:
parent
0e38699387
commit
ccfde50810
|
@ -141,6 +141,15 @@ config AHCI_SUNXI
|
|||
|
||||
If unsure, say N.
|
||||
|
||||
config AHCI_TEGRA
|
||||
tristate "NVIDIA Tegra124 AHCI SATA support"
|
||||
depends on ARCH_TEGRA
|
||||
help
|
||||
This option enables support for the NVIDIA Tegra124 SoC's
|
||||
onboard AHCI SATA.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
config AHCI_XGENE
|
||||
tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
|
||||
depends on PHY_XGENE
|
||||
|
|
|
@ -15,6 +15,7 @@ obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
|
|||
obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o
|
||||
obj-$(CONFIG_AHCI_SUNXI) += ahci_sunxi.o libahci.o libahci_platform.o
|
||||
obj-$(CONFIG_AHCI_ST) += ahci_st.o libahci.o libahci_platform.o
|
||||
obj-$(CONFIG_AHCI_TEGRA) += ahci_tegra.o libahci.o libahci_platform.o
|
||||
obj-$(CONFIG_AHCI_XGENE) += ahci_xgene.o libahci.o libahci_platform.o
|
||||
|
||||
# SFF w/ custom DMA
|
||||
|
|
377
drivers/ata/ahci_tegra.c
Normal file
377
drivers/ata/ahci_tegra.c
Normal file
|
@ -0,0 +1,377 @@
|
|||
/*
|
||||
* drivers/ata/ahci_tegra.c
|
||||
*
|
||||
* Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
|
||||
*
|
||||
* Author:
|
||||
* Mikko Perttunen <mperttunen@nvidia.com>
|
||||
*
|
||||
* This software is licensed under the terms of the GNU General Public
|
||||
* License version 2, as published by the Free Software Foundation, and
|
||||
* may be copied, distributed, and modified under those terms.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/ahci_platform.h>
|
||||
#include <linux/reset.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/tegra-powergate.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include "ahci.h"
|
||||
|
||||
#define SATA_CONFIGURATION_0 0x180
|
||||
#define SATA_CONFIGURATION_EN_FPCI BIT(0)
|
||||
|
||||
#define SCFG_OFFSET 0x1000
|
||||
|
||||
#define T_SATA0_CFG_1 0x04
|
||||
#define T_SATA0_CFG_1_IO_SPACE BIT(0)
|
||||
#define T_SATA0_CFG_1_MEMORY_SPACE BIT(1)
|
||||
#define T_SATA0_CFG_1_BUS_MASTER BIT(2)
|
||||
#define T_SATA0_CFG_1_SERR BIT(8)
|
||||
|
||||
#define T_SATA0_CFG_9 0x24
|
||||
#define T_SATA0_CFG_9_BASE_ADDRESS_SHIFT 13
|
||||
|
||||
#define SATA_FPCI_BAR5 0x94
|
||||
#define SATA_FPCI_BAR5_START_SHIFT 4
|
||||
|
||||
#define SATA_INTR_MASK 0x188
|
||||
#define SATA_INTR_MASK_IP_INT_MASK BIT(16)
|
||||
|
||||
#define T_SATA0_AHCI_HBA_CAP_BKDR 0x300
|
||||
|
||||
#define T_SATA0_BKDOOR_CC 0x4a4
|
||||
|
||||
#define T_SATA0_CFG_SATA 0x54c
|
||||
#define T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN BIT(12)
|
||||
|
||||
#define T_SATA0_CFG_MISC 0x550
|
||||
|
||||
#define T_SATA0_INDEX 0x680
|
||||
|
||||
#define T_SATA0_CHX_PHY_CTRL1_GEN1 0x690
|
||||
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK 0xff
|
||||
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT 0
|
||||
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK (0xff << 8)
|
||||
#define T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT 8
|
||||
|
||||
#define T_SATA0_CHX_PHY_CTRL1_GEN2 0x694
|
||||
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK 0xff
|
||||
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_SHIFT 0
|
||||
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK (0xff << 12)
|
||||
#define T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_SHIFT 12
|
||||
|
||||
#define T_SATA0_CHX_PHY_CTRL2 0x69c
|
||||
#define T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1 0x23
|
||||
|
||||
#define T_SATA0_CHX_PHY_CTRL11 0x6d0
|
||||
#define T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ (0x2800 << 16)
|
||||
|
||||
#define FUSE_SATA_CALIB 0x124
|
||||
#define FUSE_SATA_CALIB_MASK 0x3
|
||||
|
||||
struct sata_pad_calibration {
|
||||
u8 gen1_tx_amp;
|
||||
u8 gen1_tx_peak;
|
||||
u8 gen2_tx_amp;
|
||||
u8 gen2_tx_peak;
|
||||
};
|
||||
|
||||
static const struct sata_pad_calibration tegra124_pad_calibration[] = {
|
||||
{0x18, 0x04, 0x18, 0x0a},
|
||||
{0x0e, 0x04, 0x14, 0x0a},
|
||||
{0x0e, 0x07, 0x1a, 0x0e},
|
||||
{0x14, 0x0e, 0x1a, 0x0e},
|
||||
};
|
||||
|
||||
struct tegra_ahci_priv {
|
||||
struct platform_device *pdev;
|
||||
void __iomem *sata_regs;
|
||||
struct reset_control *sata_rst;
|
||||
struct reset_control *sata_oob_rst;
|
||||
struct reset_control *sata_cold_rst;
|
||||
/* Needs special handling, cannot use ahci_platform */
|
||||
struct clk *sata_clk;
|
||||
struct regulator_bulk_data supplies[5];
|
||||
};
|
||||
|
||||
static int tegra_ahci_power_on(struct ahci_host_priv *hpriv)
|
||||
{
|
||||
struct tegra_ahci_priv *tegra = hpriv->plat_data;
|
||||
int ret;
|
||||
|
||||
ret = regulator_bulk_enable(ARRAY_SIZE(tegra->supplies),
|
||||
tegra->supplies);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = tegra_powergate_sequence_power_up(TEGRA_POWERGATE_SATA,
|
||||
tegra->sata_clk,
|
||||
tegra->sata_rst);
|
||||
if (ret)
|
||||
goto disable_regulators;
|
||||
|
||||
reset_control_assert(tegra->sata_oob_rst);
|
||||
reset_control_assert(tegra->sata_cold_rst);
|
||||
|
||||
ret = ahci_platform_enable_resources(hpriv);
|
||||
if (ret)
|
||||
goto disable_power;
|
||||
|
||||
reset_control_deassert(tegra->sata_cold_rst);
|
||||
reset_control_deassert(tegra->sata_oob_rst);
|
||||
|
||||
return 0;
|
||||
|
||||
disable_power:
|
||||
clk_disable_unprepare(tegra->sata_clk);
|
||||
|
||||
tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
|
||||
|
||||
disable_regulators:
|
||||
regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void tegra_ahci_power_off(struct ahci_host_priv *hpriv)
|
||||
{
|
||||
struct tegra_ahci_priv *tegra = hpriv->plat_data;
|
||||
|
||||
ahci_platform_disable_resources(hpriv);
|
||||
|
||||
reset_control_assert(tegra->sata_rst);
|
||||
reset_control_assert(tegra->sata_oob_rst);
|
||||
reset_control_assert(tegra->sata_cold_rst);
|
||||
|
||||
clk_disable_unprepare(tegra->sata_clk);
|
||||
tegra_powergate_power_off(TEGRA_POWERGATE_SATA);
|
||||
|
||||
regulator_bulk_disable(ARRAY_SIZE(tegra->supplies), tegra->supplies);
|
||||
}
|
||||
|
||||
static int tegra_ahci_controller_init(struct ahci_host_priv *hpriv)
|
||||
{
|
||||
struct tegra_ahci_priv *tegra = hpriv->plat_data;
|
||||
int ret;
|
||||
unsigned int val;
|
||||
struct sata_pad_calibration calib;
|
||||
|
||||
ret = tegra_ahci_power_on(hpriv);
|
||||
if (ret) {
|
||||
dev_err(&tegra->pdev->dev,
|
||||
"failed to power on AHCI controller: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
val = readl(tegra->sata_regs + SATA_CONFIGURATION_0);
|
||||
val |= SATA_CONFIGURATION_EN_FPCI;
|
||||
writel(val, tegra->sata_regs + SATA_CONFIGURATION_0);
|
||||
|
||||
/* Pad calibration */
|
||||
|
||||
/* FIXME Always use calibration 0. Change this to read the calibration
|
||||
* fuse once the fuse driver has landed. */
|
||||
val = 0;
|
||||
|
||||
calib = tegra124_pad_calibration[val & FUSE_SATA_CALIB_MASK];
|
||||
|
||||
writel(BIT(0), tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
|
||||
|
||||
val = readl(tegra->sata_regs +
|
||||
SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN1);
|
||||
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_MASK;
|
||||
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_MASK;
|
||||
val |= calib.gen1_tx_amp <<
|
||||
T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
|
||||
val |= calib.gen1_tx_peak <<
|
||||
T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
|
||||
writel(val, tegra->sata_regs + SCFG_OFFSET +
|
||||
T_SATA0_CHX_PHY_CTRL1_GEN1);
|
||||
|
||||
val = readl(tegra->sata_regs +
|
||||
SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL1_GEN2);
|
||||
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_AMP_MASK;
|
||||
val &= ~T_SATA0_CHX_PHY_CTRL1_GEN2_TX_PEAK_MASK;
|
||||
val |= calib.gen2_tx_amp <<
|
||||
T_SATA0_CHX_PHY_CTRL1_GEN1_TX_AMP_SHIFT;
|
||||
val |= calib.gen2_tx_peak <<
|
||||
T_SATA0_CHX_PHY_CTRL1_GEN1_TX_PEAK_SHIFT;
|
||||
writel(val, tegra->sata_regs + SCFG_OFFSET +
|
||||
T_SATA0_CHX_PHY_CTRL1_GEN2);
|
||||
|
||||
writel(T_SATA0_CHX_PHY_CTRL11_GEN2_RX_EQ,
|
||||
tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL11);
|
||||
writel(T_SATA0_CHX_PHY_CTRL2_CDR_CNTL_GEN1,
|
||||
tegra->sata_regs + SCFG_OFFSET + T_SATA0_CHX_PHY_CTRL2);
|
||||
|
||||
writel(0, tegra->sata_regs + SCFG_OFFSET + T_SATA0_INDEX);
|
||||
|
||||
/* Program controller device ID */
|
||||
|
||||
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
||||
val |= T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
|
||||
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
||||
|
||||
writel(0x01060100, tegra->sata_regs + SCFG_OFFSET + T_SATA0_BKDOOR_CC);
|
||||
|
||||
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
||||
val &= ~T_SATA0_CFG_SATA_BACKDOOR_PROG_IF_EN;
|
||||
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_SATA);
|
||||
|
||||
/* Enable IO & memory access, bus master mode */
|
||||
|
||||
val = readl(tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
|
||||
val |= T_SATA0_CFG_1_IO_SPACE | T_SATA0_CFG_1_MEMORY_SPACE |
|
||||
T_SATA0_CFG_1_BUS_MASTER | T_SATA0_CFG_1_SERR;
|
||||
writel(val, tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_1);
|
||||
|
||||
/* Program SATA MMIO */
|
||||
|
||||
writel(0x10000 << SATA_FPCI_BAR5_START_SHIFT,
|
||||
tegra->sata_regs + SATA_FPCI_BAR5);
|
||||
|
||||
writel(0x08000 << T_SATA0_CFG_9_BASE_ADDRESS_SHIFT,
|
||||
tegra->sata_regs + SCFG_OFFSET + T_SATA0_CFG_9);
|
||||
|
||||
/* Unmask SATA interrupts */
|
||||
|
||||
val = readl(tegra->sata_regs + SATA_INTR_MASK);
|
||||
val |= SATA_INTR_MASK_IP_INT_MASK;
|
||||
writel(val, tegra->sata_regs + SATA_INTR_MASK);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void tegra_ahci_controller_deinit(struct ahci_host_priv *hpriv)
|
||||
{
|
||||
tegra_ahci_power_off(hpriv);
|
||||
}
|
||||
|
||||
static void tegra_ahci_host_stop(struct ata_host *host)
|
||||
{
|
||||
struct ahci_host_priv *hpriv = host->private_data;
|
||||
|
||||
tegra_ahci_controller_deinit(hpriv);
|
||||
}
|
||||
|
||||
static struct ata_port_operations ahci_tegra_port_ops = {
|
||||
.inherits = &ahci_ops,
|
||||
.host_stop = tegra_ahci_host_stop,
|
||||
};
|
||||
|
||||
static const struct ata_port_info ahci_tegra_port_info = {
|
||||
.flags = AHCI_FLAG_COMMON,
|
||||
.pio_mask = ATA_PIO4,
|
||||
.udma_mask = ATA_UDMA6,
|
||||
.port_ops = &ahci_tegra_port_ops,
|
||||
};
|
||||
|
||||
static const struct of_device_id tegra_ahci_of_match[] = {
|
||||
{ .compatible = "nvidia,tegra124-ahci" },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, tegra_ahci_of_match);
|
||||
|
||||
static int tegra_ahci_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct ahci_host_priv *hpriv;
|
||||
struct tegra_ahci_priv *tegra;
|
||||
struct resource *res;
|
||||
int ret;
|
||||
|
||||
hpriv = ahci_platform_get_resources(pdev);
|
||||
if (IS_ERR(hpriv))
|
||||
return PTR_ERR(hpriv);
|
||||
|
||||
tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
|
||||
if (!tegra)
|
||||
return -ENOMEM;
|
||||
|
||||
hpriv->plat_data = tegra;
|
||||
|
||||
tegra->pdev = pdev;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
||||
tegra->sata_regs = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(tegra->sata_regs))
|
||||
return PTR_ERR(tegra->sata_regs);
|
||||
|
||||
tegra->sata_rst = devm_reset_control_get(&pdev->dev, "sata");
|
||||
if (IS_ERR(tegra->sata_rst)) {
|
||||
dev_err(&pdev->dev, "Failed to get sata reset\n");
|
||||
return PTR_ERR(tegra->sata_rst);
|
||||
}
|
||||
|
||||
tegra->sata_oob_rst = devm_reset_control_get(&pdev->dev, "sata-oob");
|
||||
if (IS_ERR(tegra->sata_oob_rst)) {
|
||||
dev_err(&pdev->dev, "Failed to get sata-oob reset\n");
|
||||
return PTR_ERR(tegra->sata_oob_rst);
|
||||
}
|
||||
|
||||
tegra->sata_cold_rst = devm_reset_control_get(&pdev->dev, "sata-cold");
|
||||
if (IS_ERR(tegra->sata_cold_rst)) {
|
||||
dev_err(&pdev->dev, "Failed to get sata-cold reset\n");
|
||||
return PTR_ERR(tegra->sata_cold_rst);
|
||||
}
|
||||
|
||||
tegra->sata_clk = devm_clk_get(&pdev->dev, "sata");
|
||||
if (IS_ERR(tegra->sata_clk)) {
|
||||
dev_err(&pdev->dev, "Failed to get sata clock\n");
|
||||
return PTR_ERR(tegra->sata_clk);
|
||||
}
|
||||
|
||||
tegra->supplies[0].supply = "avdd";
|
||||
tegra->supplies[1].supply = "hvdd";
|
||||
tegra->supplies[2].supply = "vddio";
|
||||
tegra->supplies[3].supply = "target-5v";
|
||||
tegra->supplies[4].supply = "target-12v";
|
||||
|
||||
ret = devm_regulator_bulk_get(&pdev->dev, ARRAY_SIZE(tegra->supplies),
|
||||
tegra->supplies);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "Failed to get regulators\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = tegra_ahci_controller_init(hpriv);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = ahci_platform_init_host(pdev, hpriv, &ahci_tegra_port_info,
|
||||
0, 0, 0);
|
||||
if (ret)
|
||||
goto deinit_controller;
|
||||
|
||||
return 0;
|
||||
|
||||
deinit_controller:
|
||||
tegra_ahci_controller_deinit(hpriv);
|
||||
|
||||
return ret;
|
||||
};
|
||||
|
||||
static struct platform_driver tegra_ahci_driver = {
|
||||
.probe = tegra_ahci_probe,
|
||||
.remove = ata_platform_remove_one,
|
||||
.driver = {
|
||||
.name = "tegra-ahci",
|
||||
.of_match_table = tegra_ahci_of_match,
|
||||
},
|
||||
/* LP0 suspend support not implemented */
|
||||
};
|
||||
module_platform_driver(tegra_ahci_driver);
|
||||
|
||||
MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
|
||||
MODULE_DESCRIPTION("Tegra124 AHCI SATA driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in New Issue
Block a user