AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

soc: ti: omap-prm: Fix external abort for am335x pruss

Browse Source 
[ Upstream commit b232537074fcaf0c2837abbb217429c097bb7598 ]

Starting with v5.15-rc1, we may now see some am335x beaglebone black
device produce the following error on pruss probe:

Unhandled fault: external abort on non-linefetch (0x1008) at 0xe0326000

This has started with the enabling of pruss for am335x in the dts files.

Turns out the is caused by the PRM reset handling not waiting for the
reset bit to clear. To fix the issue, let's always wait for the reset
bit to clear, even if there is a separate reset status register.

We attempted to fix a similar issue for dra7 iva with a udelay() in
commit effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset
deassert for dra7 iva"). There is no longer a need for the udelay()
for dra7 iva reset either with the check added for reset bit clearing.

Cc: Drew Fustini <pdp7pdp7@gmail.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Robert Nelson <robertcnelson@gmail.com>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Fixes: effe89e40037 ("soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva")
Reported-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Tony Lindgren 2021-09-30 11:30:03 +03:00 committed by Greg Kroah-Hartman
parent 1d8f4447e8
commit d5f4b27c3c
1 changed files with 16 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
drivers/soc/ti/omap_prm.c
View File

@ -509,26 +509,29 @@ static int omap_reset_deassert(struct reset_controller_dev *rcdev,
writel_relaxed(v, reset->prm->base + reset->prm->data->rstctrl);
spin_unlock_irqrestore(&reset->lock, flags);
if (!has_rstst)
goto exit;
/* wait for the status to be set */
/* wait for the reset bit to clear */
ret = readl_relaxed_poll_timeout_atomic(reset->prm->base +
reset->prm->data->rstst,
v, v & BIT(st_bit), 1,
OMAP_RESET_MAX_WAIT);
reset->prm->data->rstctrl,
v, !(v & BIT(id)), 1,
OMAP_RESET_MAX_WAIT);
if (ret)
pr_err("%s: timedout waiting for %s:%lu\n", __func__,
reset->prm->data->name, id);
exit:
if (reset->clkdm) {
/* At least dra7 iva needs a delay before clkdm idle */
if (has_rstst)
udelay(1);
pdata->clkdm_allow_idle(reset->clkdm);
/* wait for the status to be set */
if (has_rstst) {
ret = readl_relaxed_poll_timeout_atomic(reset->prm->base +
reset->prm->data->rstst,
v, v & BIT(st_bit), 1,
OMAP_RESET_MAX_WAIT);
if (ret)
pr_err("%s: timedout waiting for %s:%lu\n", __func__,
reset->prm->data->name, id);
}
if (reset->clkdm)
pdata->clkdm_allow_idle(reset->clkdm);
return ret;
}