Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Kill off I/O cruft for R7780RP.
  sh: Revert lazy dcache writeback changes.
  sh: Enable SM501 support for RTS7751R2D.
  sh: Use L1_CACHE_BYTES for .data.cacheline_aligned.
  sysctl: Support vdso_enabled sysctl on SH.
  sh: Fix kernel thread stack corruption with preempt.
  doc: Add SH to vdso and earlyprintk in kernel-parameters.txt
  sh: Fix sigmask trampling in signal delivery.
  sh: Clear UBC when not in use.
This commit is contained in:
Linus Torvalds 2007-03-07 10:08:33 -08:00
commit d694c16bc3
26 changed files with 371 additions and 371 deletions

View File

@ -79,6 +79,7 @@ parameter is applicable:
Documentation/scsi/.
SELINUX SELinux support is enabled.
SERIAL Serial support is enabled.
SH SuperH architecture is enabled.
SMP The kernel is an SMP kernel.
SPARC Sparc architecture is enabled.
SWSUSP Software suspend is enabled.
@ -485,7 +486,7 @@ and is between 256 and 4096 characters. It is defined in the file
dtc3181e= [HW,SCSI]
earlyprintk= [IA-32,X86-64]
earlyprintk= [IA-32,X86-64,SH]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
@ -1784,7 +1785,7 @@ and is between 256 and 4096 characters. It is defined in the file
usbhid.mousepoll=
[USBHID] The interval which mice are to be polled at.
vdso= [IA-32]
vdso= [IA-32,SH]
vdso=1: enable VDSO (default)
vdso=0: disable VDSO mapping

View File

@ -2,6 +2,6 @@
# Makefile for the R7780RP-1 specific parts of the kernel
#
obj-y := setup.o io.o irq.o
obj-y := setup.o irq.o
obj-$(CONFIG_PUSH_SWITCH) += psw.o

View File

@ -1,233 +0,0 @@
/*
* Copyright (C) 2001 Ian da Silva, Jeremy Siegel
* Based largely on io_se.c.
*
* I/O routine for Renesas Solutions Highlander R7780RP-1
*
* Initial version only to support LAN access; some
* placeholder code from io_r7780rp.c left in with the
* expectation of later SuperIO and PCMCIA access.
*/
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/io.h>
#include <asm/r7780rp.h>
#include <asm/addrspace.h>
static inline unsigned long port88796l(unsigned int port, int flag)
{
unsigned long addr;
if (flag)
addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1);
else
addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000;
return addr;
}
#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE)
#define CHECK_AX88796L_PORT(port) \
((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20)))
#else
#define CHECK_AX88796L_PORT(port) (0)
#endif
/*
* General outline: remap really low stuff [eventually] to SuperIO,
* stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
* is mapped through the PCI IO window. Stuff with high bits (PXSEG)
* should be way beyond the window, and is used w/o translation for
* compatibility.
*/
u8 r7780rp_inb(unsigned long port)
{
if (CHECK_AX88796L_PORT(port))
return ctrl_inw(port88796l(port, 0)) & 0xff;
else if (is_pci_ioaddr(port))
return ctrl_inb(pci_ioaddr(port));
return ctrl_inw(port) & 0xff;
}
u8 r7780rp_inb_p(unsigned long port)
{
u8 v;
if (CHECK_AX88796L_PORT(port))
v = ctrl_inw(port88796l(port, 0)) & 0xff;
else if (is_pci_ioaddr(port))
v = ctrl_inb(pci_ioaddr(port));
else
v = ctrl_inw(port) & 0xff;
ctrl_delay();
return v;
}
u16 r7780rp_inw(unsigned long port)
{
if (is_pci_ioaddr(port))
return ctrl_inw(pci_ioaddr(port));
return ctrl_inw(port);
}
u32 r7780rp_inl(unsigned long port)
{
if (is_pci_ioaddr(port))
return ctrl_inl(pci_ioaddr(port));
return ctrl_inl(port);
}
void r7780rp_outb(u8 value, unsigned long port)
{
if (CHECK_AX88796L_PORT(port))
ctrl_outw(value, port88796l(port, 0));
else if (is_pci_ioaddr(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outb(value, port);
}
void r7780rp_outb_p(u8 value, unsigned long port)
{
if (CHECK_AX88796L_PORT(port))
ctrl_outw(value, port88796l(port, 0));
else if (is_pci_ioaddr(port))
ctrl_outb(value, pci_ioaddr(port));
else
ctrl_outb(value, port);
ctrl_delay();
}
void r7780rp_outw(u16 value, unsigned long port)
{
if (is_pci_ioaddr(port))
ctrl_outw(value, pci_ioaddr(port));
else
ctrl_outw(value, port);
}
void r7780rp_outl(u32 value, unsigned long port)
{
if (is_pci_ioaddr(port))
ctrl_outl(value, pci_ioaddr(port));
else
ctrl_outl(value, port);
}
void r7780rp_insb(unsigned long port, void *dst, unsigned long count)
{
volatile u16 *p;
u8 *buf = dst;
if (CHECK_AX88796L_PORT(port)) {
p = (volatile u16 *)port88796l(port, 0);
while (count--)
*buf++ = *p & 0xff;
} else if (is_pci_ioaddr(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*buf++ = *bp;
} else {
p = (volatile u16 *)port;
while (count--)
*buf++ = *p & 0xff;
}
}
void r7780rp_insw(unsigned long port, void *dst, unsigned long count)
{
volatile u16 *p;
u16 *buf = dst;
if (CHECK_AX88796L_PORT(port))
p = (volatile u16 *)port88796l(port, 1);
else if (is_pci_ioaddr(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port;
while (count--)
*buf++ = *p;
flush_dcache_all();
}
void r7780rp_insl(unsigned long port, void *dst, unsigned long count)
{
if (is_pci_ioaddr(port)) {
volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
u32 *buf = dst;
while (count--)
*buf++ = *p;
}
}
void r7780rp_outsb(unsigned long port, const void *src, unsigned long count)
{
volatile u16 *p;
const u8 *buf = src;
if (CHECK_AX88796L_PORT(port)) {
p = (volatile u16 *)port88796l(port, 0);
while (count--)
*p = *buf++;
} else if (is_pci_ioaddr(port)) {
volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
while (count--)
*bp = *buf++;
} else
while (count--)
ctrl_outb(*buf++, port);
}
void r7780rp_outsw(unsigned long port, const void *src, unsigned long count)
{
volatile u16 *p;
const u16 *buf = src;
if (CHECK_AX88796L_PORT(port))
p = (volatile u16 *)port88796l(port, 1);
else if (is_pci_ioaddr(port))
p = (volatile u16 *)pci_ioaddr(port);
else
p = (volatile u16 *)port;
while (count--)
*p = *buf++;
flush_dcache_all();
}
void r7780rp_outsl(unsigned long port, const void *src, unsigned long count)
{
const u32 *buf = src;
u32 *p;
if (is_pci_ioaddr(port))
p = (u32 *)pci_ioaddr(port);
else
p = (u32 *)port;
while (count--)
ctrl_outl(*buf++, (unsigned long)p);
}
void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size)
{
if (CHECK_AX88796L_PORT(port))
return (void __iomem *)port88796l(port, size > 1);
else if (is_pci_ioaddr(port))
return (void __iomem *)pci_ioaddr(port);
return (void __iomem *)port;
}

View File

@ -187,31 +187,7 @@ static void __init r7780rp_setup(char **cmdline_p)
struct sh_machine_vector mv_r7780rp __initmv = {
.mv_name = "Highlander R7780RP-1",
.mv_setup = r7780rp_setup,
.mv_nr_irqs = 109,
.mv_inb = r7780rp_inb,
.mv_inw = r7780rp_inw,
.mv_inl = r7780rp_inl,
.mv_outb = r7780rp_outb,
.mv_outw = r7780rp_outw,
.mv_outl = r7780rp_outl,
.mv_inb_p = r7780rp_inb_p,
.mv_inw_p = r7780rp_inw,
.mv_inl_p = r7780rp_inl,
.mv_outb_p = r7780rp_outb_p,
.mv_outw_p = r7780rp_outw,
.mv_outl_p = r7780rp_outl,
.mv_insb = r7780rp_insb,
.mv_insw = r7780rp_insw,
.mv_insl = r7780rp_insl,
.mv_outsb = r7780rp_outsb,
.mv_outsw = r7780rp_outsw,
.mv_outsl = r7780rp_outsl,
.mv_ioport_map = r7780rp_ioport_map,
.mv_init_irq = init_r7780rp_IRQ,
};
ALIAS_MV(r7780rp)

View File

@ -12,6 +12,7 @@
#include <linux/platform_device.h>
#include <linux/pata_platform.h>
#include <linux/serial_8250.h>
#include <linux/sm501.h>
#include <linux/pm.h>
#include <asm/machvec.h>
#include <asm/rts7751r2d.h>
@ -111,10 +112,35 @@ static struct platform_device heartbeat_device = {
.resource = heartbeat_resources,
};
static struct resource sm501_resources[] = {
[0] = {
.start = 0x10000000,
.end = 0x13e00000 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0x13e00000,
.end = 0x13ffffff,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = 32,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sm501_device = {
.name = "sm501",
.id = -1,
.num_resources = ARRAY_SIZE(sm501_resources),
.resource = sm501_resources,
};
static struct platform_device *rts7751r2d_devices[] __initdata = {
&uart_device,
&heartbeat_device,
&cf_ide_device,
&sm501_device,
};
static int __init rts7751r2d_devices_setup(void)

View File

@ -1,14 +1,13 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20
# Thu Feb 15 17:17:29 2007
# Linux kernel version: 2.6.21-rc1
# Thu Mar 1 16:42:40 2007
#
CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME is not set
@ -33,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
@ -119,7 +119,6 @@ CONFIG_SH_RTS7751R2D=y
# CONFIG_SH_SHMIN is not set
# CONFIG_SH_7206_SOLUTION_ENGINE is not set
# CONFIG_SH_7619_SOLUTION_ENGINE is not set
# CONFIG_SH_ASDAP310 is not set
# CONFIG_SH_UNKNOWN is not set
#
@ -281,7 +280,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00010000
CONFIG_BOOT_LINK_OFFSET=0x00800000
# CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1"
#
# Bus options
@ -433,6 +432,7 @@ CONFIG_FW_LOADER=m
#
# Plug and Play support
#
# CONFIG_PNPACPI is not set
#
# Block devices
@ -770,7 +770,26 @@ CONFIG_NET_WIRELESS=y
#
# Input device support
#
# CONFIG_INPUT is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
@ -781,7 +800,10 @@ CONFIG_NET_WIRELESS=y
#
# Character devices
#
# CONFIG_VT is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@ -856,6 +878,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Multifunction device drivers
#
CONFIG_MFD_SM501=y
#
# Multimedia devices
#
@ -869,9 +896,66 @@ CONFIG_HWMON=y
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_EPSON1355 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
#
# Sound
@ -984,6 +1068,12 @@ CONFIG_SOUND_PRIME=m
# CONFIG_SOUND_VIA82CXXX is not set
CONFIG_AC97_BUS=m
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
#
@ -1237,7 +1327,7 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
CONFIG_EARLY_PRINTK=y
# CONFIG_KGDB is not set
# CONFIG_SH_KGDB is not set
#
# Security options

View File

@ -224,7 +224,7 @@ work_resched:
syscall_exit_work:
! r0: current_thread_info->flags
! r8: current_thread_info
tst #_TIF_SYSCALL_TRACE, r0
tst #_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP, r0
bt/s work_pending
tst #_TIF_NEED_RESCHED, r0
#ifdef CONFIG_TRACE_IRQFLAGS

View File

@ -14,7 +14,6 @@
#include <linux/module.h>
#include <linux/io.h>
#include <asm/machvec.h>
#include <asm/cacheflush.h>
#ifdef CONFIG_CPU_SH3
/* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a
@ -96,7 +95,6 @@ void generic_insw(unsigned long port, void *dst, unsigned long count)
while (count--)
*buf++ = *port_addr;
flush_dcache_all();
dummy_read();
}
@ -171,7 +169,6 @@ void generic_outsw(unsigned long port, const void *src, unsigned long count)
while (count--)
*port_addr = *buf++;
flush_dcache_all();
dummy_read();
}

View File

@ -250,12 +250,11 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
childregs->regs[15] = usp;
ti->addr_limit = USER_DS;
} else {
childregs->regs[15] = (unsigned long)task_stack_page(p) +
THREAD_SIZE;
childregs->regs[15] = (unsigned long)childregs;
ti->addr_limit = KERNEL_DS;
}
if (clone_flags & CLONE_SETTLS)
if (clone_flags & CLONE_SETTLS)
childregs->gbr = childregs->regs[0];
childregs->regs[0] = 0; /* Set return value for child */

View File

@ -8,7 +8,6 @@
* SuperH version: Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka
*
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
@ -20,8 +19,7 @@
#include <linux/slab.h>
#include <linux/security.h>
#include <linux/signal.h>
#include <asm/io.h>
#include <linux/io.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/system.h>
@ -59,6 +57,23 @@ static inline int put_stack_long(struct task_struct *task, int offset,
return 0;
}
static void ptrace_disable_singlestep(struct task_struct *child)
{
clear_tsk_thread_flag(child, TIF_SINGLESTEP);
/*
* Ensure the UBC is not programmed at the next context switch.
*
* Normally this is not needed but there are sequences such as
* singlestep, signal delivery, and continue that leave the
* ubc_pc non-zero leading to spurious SIGTRAPs.
*/
if (child->thread.ubc_pc != 0) {
ubc_usercnt -= 1;
child->thread.ubc_pc = 0;
}
}
/*
* Called by kernel/ptrace.c when detaching..
*
@ -66,7 +81,7 @@ static inline int put_stack_long(struct task_struct *task, int offset,
*/
void ptrace_disable(struct task_struct *child)
{
/* nothing to do.. */
ptrace_disable_singlestep(child);
}
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@ -156,6 +171,9 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
else
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
ptrace_disable_singlestep(child);
child->exit_code = data;
wake_up_process(child);
ret = 0;
@ -171,6 +189,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
ret = 0;
if (child->exit_state == EXIT_ZOMBIE) /* already dead */
break;
ptrace_disable_singlestep(child);
child->exit_code = SIGKILL;
wake_up_process(child);
break;
@ -196,6 +215,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
ubc_usercnt += 1;
child->thread.ubc_pc = pc;
set_tsk_thread_flag(child, TIF_SINGLESTEP);
child->exit_code = data;
/* give it a chance to run. */
wake_up_process(child);
@ -248,14 +268,15 @@ asmlinkage void do_syscall_trace(void)
{
struct task_struct *tsk = current;
if (!test_thread_flag(TIF_SYSCALL_TRACE))
if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
!test_thread_flag(TIF_SINGLESTEP))
return;
if (!(tsk->ptrace & PT_PTRACED))
return;
/* the 0x80 provides a way for the tracing parent to distinguish
between a syscall stop and SIGTRAP delivery */
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
? 0x80 : 0));
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) &&
!test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
/*
* this isn't the same as continuing with a signal, but it will do

View File

@ -589,6 +589,8 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
return;
}
no_signal:
@ -598,7 +600,7 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
if (regs->regs[0] == -ERESTARTNOHAND ||
regs->regs[0] == -ERESTARTSYS ||
regs->regs[0] == -ERESTARTNOINTR) {
regs->regs[0] = save_r0;
regs->regs[0] = save_r0;
regs->pc -= 2;
} else if (regs->regs[0] == -ERESTART_RESTARTBLOCK) {
regs->pc -= 2;

View File

@ -3,6 +3,7 @@
* Written by Niibe Yutaka
*/
#include <asm/thread_info.h>
#include <asm/cache.h>
#include <asm-generic/vmlinux.lds.h>
#ifdef CONFIG_CPU_LITTLE_ENDIAN
@ -53,7 +54,7 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
.data.page_aligned : { *(.data.page_aligned) }
. = ALIGN(32);
. = ALIGN(L1_CACHE_BYTES);
__per_cpu_start = .;
.data.percpu : { *(.data.percpu) }
__per_cpu_end = .;

View File

@ -237,20 +237,10 @@ static inline void flush_cache_4096(unsigned long start,
/*
* Write back & invalidate the D-cache of the page.
* (To avoid "alias" issues)
*
* This uses a lazy write-back on UP, which is explicitly
* disabled on SMP.
*/
void flush_dcache_page(struct page *page)
{
#ifndef CONFIG_SMP
struct address_space *mapping = page_mapping(page);
if (mapping && !mapping_mapped(mapping))
set_bit(PG_dcache_dirty, &page->flags);
else
#endif
{
if (test_bit(PG_mapped, &page->flags)) {
unsigned long phys = PHYSADDR(page_address(page));
unsigned long addr = CACHE_OC_ADDRESS_ARRAY;
int i, n;

View File

@ -3,11 +3,11 @@
*
* Copyright (C) 1999, 2000 Niibe Yutaka
* Copyright (C) 2004 Alex Song
* Copyright (C) 2006 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
#include <linux/init.h>
#include <linux/mman.h>
@ -51,6 +51,7 @@ static inline void cache_wback_all(void)
if ((data & v) == v)
ctrl_outl(data & ~v, addr);
}
addrstart += current_cpu_data.dcache.way_incr;
@ -127,11 +128,7 @@ static void __flush_dcache_page(unsigned long phys)
*/
void flush_dcache_page(struct page *page)
{
struct address_space *mapping = page_mapping(page);
if (mapping && !mapping_mapped(mapping))
set_bit(PG_dcache_dirty, &page->flags);
else
if (test_bit(PG_mapped, &page->flags))
__flush_dcache_page(PHYSADDR(page_address(page)));
}

View File

@ -23,6 +23,7 @@ extern struct mutex p3map_mutex[];
*/
void clear_user_page(void *to, unsigned long address, struct page *page)
{
__set_bit(PG_mapped, &page->flags);
if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
clear_page(to);
else {
@ -58,6 +59,7 @@ void clear_user_page(void *to, unsigned long address, struct page *page)
void copy_user_page(void *to, void *from, unsigned long address,
struct page *page)
{
__set_bit(PG_mapped, &page->flags);
if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0)
copy_page(to, from);
else {
@ -82,3 +84,23 @@ void copy_user_page(void *to, void *from, unsigned long address,
mutex_unlock(&p3map_mutex[(address & CACHE_ALIAS)>>12]);
}
}
/*
* For SH-4, we have our own implementation for ptep_get_and_clear
*/
inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
pte_t pte = *ptep;
pte_clear(mm, addr, ptep);
if (!pte_not_present(pte)) {
unsigned long pfn = pte_pfn(pte);
if (pfn_valid(pfn)) {
struct page *page = pfn_to_page(pfn);
struct address_space *mapping = page_mapping(page);
if (!mapping || !mapping_writably_mapped(mapping))
__clear_bit(PG_mapped, &page->flags);
}
}
return pte;
}

View File

@ -7,7 +7,9 @@
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
#include <linux/init.h>
#include <linux/mman.h>
#include <linux/mm.h>
@ -74,6 +76,7 @@ void clear_user_page(void *to, unsigned long address, struct page *pg)
{
struct page *page = virt_to_page(to);
__set_bit(PG_mapped, &page->flags);
if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) {
clear_page(to);
__flush_wback_region(to, PAGE_SIZE);
@ -92,11 +95,12 @@ void clear_user_page(void *to, unsigned long address, struct page *pg)
* @from: P1 address
* @address: U0 address to be mapped
*/
void copy_user_page(void *to, void *from, unsigned long address,
struct page *pg)
void copy_user_page(void *to, void *from, unsigned long address, struct page *pg)
{
struct page *page = virt_to_page(to);
__set_bit(PG_mapped, &page->flags);
if (((address ^ (unsigned long)to) & CACHE_ALIAS) == 0) {
copy_page(to, from);
__flush_wback_region(to, PAGE_SIZE);
@ -108,3 +112,26 @@ void copy_user_page(void *to, void *from, unsigned long address,
__flush_wback_region(to, PAGE_SIZE);
}
}
/*
* For SH7705, we have our own implementation for ptep_get_and_clear
* Copied from pg-sh4.c
*/
inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
pte_t pte = *ptep;
pte_clear(mm, addr, ptep);
if (!pte_not_present(pte)) {
unsigned long pfn = pte_pfn(pte);
if (pfn_valid(pfn)) {
struct page *page = pfn_to_page(pfn);
struct address_space *mapping = page_mapping(page);
if (!mapping || !mapping_writably_mapped(mapping))
__clear_bit(PG_mapped, &page->flags);
}
}
return pte;
}

View File

@ -2,17 +2,15 @@
* TLB flushing operations for SH with an MMU.
*
* Copyright (C) 1999 Niibe Yutaka
* Copyright (C) 2003 - 2006 Paul Mundt
* Copyright (C) 2003 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/mm.h>
#include <linux/io.h>
#include <asm/mmu_context.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
{
@ -140,54 +138,3 @@ void local_flush_tlb_all(void)
ctrl_barrier();
local_irq_restore(flags);
}
void update_mmu_cache(struct vm_area_struct *vma,
unsigned long address, pte_t pte)
{
unsigned long flags;
unsigned long pteval;
unsigned long vpn;
struct page *page;
unsigned long pfn = pte_pfn(pte);
struct address_space *mapping;
if (!pfn_valid(pfn))
return;
page = pfn_to_page(pfn);
mapping = page_mapping(page);
if (mapping) {
unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
if (dirty)
__flush_wback_region((void *)P1SEGADDR(phys),
PAGE_SIZE);
}
local_irq_save(flags);
/* Set PTEH register */
vpn = (address & MMU_VPN_MASK) | get_asid();
ctrl_outl(vpn, MMU_PTEH);
pteval = pte_val(pte);
#ifdef CONFIG_CPU_HAS_PTEA
/* Set PTEA register */
/* TODO: make this look less hacky */
ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA);
#endif
/* Set PTEL register */
pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
#if defined(CONFIG_SH_WRITETHROUGH) && defined(CONFIG_CPU_SH4)
pteval |= _PAGE_WT;
#endif
/* conveniently, we want all the software flags to be 0 anyway */
ctrl_outl(pteval, MMU_PTEL);
/* Load the TLB */
asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
local_irq_restore(flags);
}

View File

@ -8,9 +8,69 @@
*
* Released under the terms of the GNU GPL v2.0.
*/
#include <linux/io.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
void update_mmu_cache(struct vm_area_struct * vma,
unsigned long address, pte_t pte)
{
unsigned long flags;
unsigned long pteval;
unsigned long vpn;
/* Ptrace may call this routine. */
if (vma && current->active_mm != vma->vm_mm)
return;
#if defined(CONFIG_SH7705_CACHE_32KB)
{
struct page *page = pte_page(pte);
unsigned long pfn = pte_pfn(pte);
if (pfn_valid(pfn) && !test_bit(PG_mapped, &page->flags)) {
unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
__flush_wback_region((void *)P1SEGADDR(phys),
PAGE_SIZE);
__set_bit(PG_mapped, &page->flags);
}
}
#endif
local_irq_save(flags);
/* Set PTEH register */
vpn = (address & MMU_VPN_MASK) | get_asid();
ctrl_outl(vpn, MMU_PTEH);
pteval = pte_val(pte);
/* Set PTEL register */
pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
/* conveniently, we want all the software flags to be 0 anyway */
ctrl_outl(pteval, MMU_PTEL);
/* Load the TLB */
asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
local_irq_restore(flags);
}
void local_flush_tlb_one(unsigned long asid, unsigned long page)
{
@ -34,3 +94,4 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
for (i = 0; i < ways; i++)
ctrl_outl(data, addr + (i << 8));
}

View File

@ -8,9 +8,74 @@
*
* Released under the terms of the GNU GPL v2.0.
*/
#include <linux/io.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/interrupt.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/pgalloc.h>
#include <asm/mmu_context.h>
#include <asm/cacheflush.h>
void update_mmu_cache(struct vm_area_struct * vma,
unsigned long address, pte_t pte)
{
unsigned long flags;
unsigned long pteval;
unsigned long vpn;
struct page *page;
unsigned long pfn;
/* Ptrace may call this routine. */
if (vma && current->active_mm != vma->vm_mm)
return;
pfn = pte_pfn(pte);
if (pfn_valid(pfn)) {
page = pfn_to_page(pfn);
if (!test_bit(PG_mapped, &page->flags)) {
unsigned long phys = pte_val(pte) & PTE_PHYS_MASK;
__flush_wback_region((void *)P1SEGADDR(phys), PAGE_SIZE);
__set_bit(PG_mapped, &page->flags);
}
}
local_irq_save(flags);
/* Set PTEH register */
vpn = (address & MMU_VPN_MASK) | get_asid();
ctrl_outl(vpn, MMU_PTEH);
pteval = pte_val(pte);
/* Set PTEA register */
if (cpu_data->flags & CPU_HAS_PTEA)
/* TODO: make this look less hacky */
ctrl_outl(((pteval >> 28) & 0xe) | (pteval & 0x1), MMU_PTEA);
/* Set PTEL register */
pteval &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */
#ifdef CONFIG_SH_WRITETHROUGH
pteval |= _PAGE_WT;
#endif
/* conveniently, we want all the software flags to be 0 anyway */
ctrl_outl(pteval, MMU_PTEL);
/* Load the TLB */
asm volatile("ldtlb": /* no output */ : /* no input */ : "memory");
local_irq_restore(flags);
}
void local_flush_tlb_one(unsigned long asid, unsigned long page)
{
@ -28,3 +93,4 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page)
ctrl_outl(data, addr);
back_to_P1();
}

View File

@ -21,6 +21,7 @@
#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
#ifndef __ASSEMBLY__
struct cache_info {
unsigned int ways; /* Number of cache ways */
unsigned int sets; /* Number of cache sets */
@ -47,6 +48,6 @@ struct cache_info {
unsigned long flags;
};
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* __ASM_SH_CACHE_H */

View File

@ -30,8 +30,5 @@ extern void __flush_invalidate_region(void *start, int size);
#define HAVE_ARCH_UNMAPPED_AREA
/* Page flag for lazy dcache write-back for the aliasing UP caches */
#define PG_dcache_dirty PG_arch_1
#endif /* __KERNEL__ */
#endif /* __ASM_SH_CACHEFLUSH_H */

View File

@ -36,6 +36,8 @@
/* 32KB cache, 4kb PAGE sizes need to check bit 12 */
#define CACHE_ALIAS 0x00001000
#define PG_mapped PG_arch_1
void flush_cache_all(void);
void flush_cache_mm(struct mm_struct *mm);
#define flush_cache_dup_mm(mm) flush_cache_mm(mm)

View File

@ -39,4 +39,6 @@ void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
/* Initialization of P3 area for copy_user_page */
void p3_cache_init(void);
#define PG_mapped PG_arch_1
#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */

View File

@ -583,6 +583,11 @@ struct mm_struct;
extern unsigned int kobjsize(const void *objp);
#endif /* !CONFIG_MMU */
#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB)
#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
extern pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
#endif
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
extern void paging_init(void);

View File

@ -111,6 +111,7 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_RESTORE_SIGMASK 4 /* restore signal mask in do_signal() */
#define TIF_SINGLESTEP 5 /* singlestepping active */
#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */
#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 18
@ -121,6 +122,7 @@ static inline struct thread_info *current_thread_info(void)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
#define _TIF_USEDFPU (1<<TIF_USEDFPU)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_FREEZE (1<<TIF_FREEZE)

View File

@ -846,7 +846,8 @@ static ctl_table vm_table[] = {
.extra2 = &one_hundred,
},
#endif
#ifdef CONFIG_X86_32
#if defined(CONFIG_X86_32) || \
(defined(CONFIG_SUPERH) && defined(CONFIG_VSYSCALL))
{
.ctl_name = VM_VDSO_ENABLED,
.procname = "vdso_enabled",