forked from luck/tmp_suning_uos_patched
docs: ide: convert docs to ReST and rename to *.rst
The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This commit is contained in:
Mauro Carvalho Chehab
Jonathan Corbet
parent
c220a1fae6
commit
d7b461c5e8
|
|
@ -1504,7 +1504,7 @@
|
|||
Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
|
||||
.vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr
|
||||
.cdrom .chs .ignore_cable are additional options
|
||||
See Documentation/ide/ide.txt.
|
||||
See Documentation/ide/ide.rst.
|
||||
|
||||
ide-generic.probe-mask= [HW] (E)IDE subsystem
|
||||
Format: <int>
|
||||
|
|
|
|||
|
|
@ -47,7 +47,7 @@ This driver provides the following features:
|
|||
---------------
|
||||
|
||||
0. The ide-cd relies on the ide disk driver. See
|
||||
Documentation/ide/ide.txt for up-to-date information on the ide
|
||||
Documentation/ide/ide.rst for up-to-date information on the ide
|
||||
driver.
|
||||
|
||||
1. Make sure that the ide and ide-cd drivers are compiled into the
|
||||
|
|
@ -62,7 +62,7 @@ This driver provides the following features:
|
|||
|
||||
Depending on what type of IDE interface you have, you may need to
|
||||
specify additional configuration options. See
|
||||
Documentation/ide/ide.txt.
|
||||
Documentation/ide/ide.rst.
|
||||
|
||||
2. You should also ensure that the iso9660 filesystem is either
|
||||
compiled into the kernel or available as a loadable module. You
|
||||
|
|
@ -82,7 +82,7 @@ This driver provides the following features:
|
|||
on the primary IDE interface are called `hda` and `hdb`,
|
||||
respectively. The drives on the secondary interface are called
|
||||
`hdc` and `hdd`. (Interfaces at other locations get other letters
|
||||
in the third position; see Documentation/ide/ide.txt.)
|
||||
in the third position; see Documentation/ide/ide.rst.)
|
||||
|
||||
If you want your CDROM drive to be found automatically by the
|
||||
driver, you should make sure your IDE interface uses either the
|
||||
|
|
@ -91,7 +91,7 @@ This driver provides the following features:
|
|||
be jumpered as `master`. (If for some reason you cannot configure
|
||||
your system in this manner, you can probably still use the driver.
|
||||
You may have to pass extra configuration information to the kernel
|
||||
when you boot, however. See Documentation/ide/ide.txt for more
|
||||
when you boot, however. See Documentation/ide/ide.rst for more
|
||||
information.)
|
||||
|
||||
4. Boot the system. If the drive is recognized, you should see a
|
||||
|
|
@ -163,7 +163,7 @@ to change. If the slot number is -1, the drive is unloaded.
|
|||
This section discusses some common problems encountered when trying to
|
||||
use the driver, and some possible solutions. Note that if you are
|
||||
experiencing problems, you should probably also review
|
||||
Documentation/ide/ide.txt for current information about the underlying
|
||||
Documentation/ide/ide.rst for current information about the underlying
|
||||
IDE support code. Some of these items apply only to earlier versions
|
||||
of the driver, but are mentioned here for completeness.
|
||||
|
||||
|
|
@ -173,7 +173,7 @@ from the driver.
|
|||
a. Drive is not detected during booting.
|
||||
|
||||
- Review the configuration instructions above and in
|
||||
Documentation/ide/ide.txt, and check how your hardware is
|
||||
Documentation/ide/ide.rst, and check how your hardware is
|
||||
configured.
|
||||
|
||||
- If your drive is the only device on an IDE interface, it should
|
||||
|
|
@ -181,7 +181,7 @@ a. Drive is not detected during booting.
|
|||
|
||||
- If your IDE interface is not at the standard addresses of 0x170
|
||||
or 0x1f0, you'll need to explicitly inform the driver using a
|
||||
lilo option. See Documentation/ide/ide.txt. (This feature was
|
||||
lilo option. See Documentation/ide/ide.rst. (This feature was
|
||||
added around kernel version 1.3.30.)
|
||||
|
||||
- If the autoprobing is not finding your drive, you can tell the
|
||||
|
|
@ -207,7 +207,7 @@ a. Drive is not detected during booting.
|
|||
Support for some interfaces needing extra initialization is
|
||||
provided in later 1.3.x kernels. You may need to turn on
|
||||
additional kernel configuration options to get them to work;
|
||||
see Documentation/ide/ide.txt.
|
||||
see Documentation/ide/ide.rst.
|
||||
|
||||
Even if support is not available for your interface, you may be
|
||||
able to get it to work with the following procedure. First boot
|
||||
|
|
@ -261,7 +261,7 @@ c. System hangups.
|
|||
be worked around by specifying the `serialize` option when
|
||||
booting. Recent kernels should be able to detect the need for
|
||||
this automatically in most cases, but the detection is not
|
||||
foolproof. See Documentation/ide/ide.txt for more information
|
||||
foolproof. See Documentation/ide/ide.rst for more information
|
||||
about the `serialize` option and the CMD640B.
|
||||
|
||||
- Note that many MS-DOS CDROM drivers will work with such buggy
|
||||
|
|
|
|||
17
Documentation/ide/changelogs.rst
Normal file
17
Documentation/ide/changelogs.rst
Normal file
|
|
@ -0,0 +1,17 @@
|
|||
Changelog for ide cd
|
||||
--------------------
|
||||
|
||||
.. include:: ChangeLog.ide-cd.1994-2004
|
||||
:literal:
|
||||
|
||||
Changelog for ide floppy
|
||||
------------------------
|
||||
|
||||
.. include:: ChangeLog.ide-floppy.1996-2002
|
||||
:literal:
|
||||
|
||||
Changelog for ide tape
|
||||
----------------------
|
||||
|
||||
.. include:: ChangeLog.ide-tape.1995-2002
|
||||
:literal:
|
||||
|
|
@ -1,4 +1,6 @@
|
|||
IDE ATAPI streaming tape driver.
|
||||
===============================
|
||||
IDE ATAPI streaming tape driver
|
||||
===============================
|
||||
|
||||
This driver is a part of the Linux ide driver.
|
||||
|
||||
|
|
@ -10,14 +12,14 @@ to the request-list of the block device, and waits for their completion.
|
|||
The block device major and minor numbers are determined from the
|
||||
tape's relative position in the ide interfaces, as explained in ide.c.
|
||||
|
||||
The character device interface consists of the following devices:
|
||||
The character device interface consists of the following devices::
|
||||
|
||||
ht0 major 37, minor 0 first IDE tape, rewind on close.
|
||||
ht1 major 37, minor 1 second IDE tape, rewind on close.
|
||||
...
|
||||
nht0 major 37, minor 128 first IDE tape, no rewind on close.
|
||||
nht1 major 37, minor 129 second IDE tape, no rewind on close.
|
||||
...
|
||||
ht0 major 37, minor 0 first IDE tape, rewind on close.
|
||||
ht1 major 37, minor 1 second IDE tape, rewind on close.
|
||||
...
|
||||
nht0 major 37, minor 128 first IDE tape, no rewind on close.
|
||||
nht1 major 37, minor 129 second IDE tape, no rewind on close.
|
||||
...
|
||||
|
||||
The general magnetic tape commands compatible interface, as defined by
|
||||
include/linux/mtio.h, is accessible through the character device.
|
||||
|
|
@ -40,9 +42,10 @@ Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive.
|
|||
Here are some words from the first releases of hd.c, which are quoted
|
||||
in ide.c and apply here as well:
|
||||
|
||||
| Special care is recommended. Have Fun!
|
||||
* Special care is recommended. Have Fun!
|
||||
|
||||
Possible improvements:
|
||||
Possible improvements
|
||||
=====================
|
||||
|
||||
1. Support for the ATAPI overlap protocol.
|
||||
|
||||
|
|
@ -1,41 +1,43 @@
|
|||
|
||||
Information regarding the Enhanced IDE drive in Linux 2.6
|
||||
|
||||
==============================================================================
|
||||
|
||||
============================================
|
||||
Information regarding the Enhanced IDE drive
|
||||
============================================
|
||||
|
||||
The hdparm utility can be used to control various IDE features on a
|
||||
running system. It is packaged separately. Please Look for it on popular
|
||||
linux FTP sites.
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
.. important::
|
||||
|
||||
*** IMPORTANT NOTICES: BUGGY IDE CHIPSETS CAN CORRUPT DATA!!
|
||||
*** =================
|
||||
*** PCI versions of the CMD640 and RZ1000 interfaces are now detected
|
||||
*** automatically at startup when PCI BIOS support is configured.
|
||||
***
|
||||
*** Linux disables the "prefetch" ("readahead") mode of the RZ1000
|
||||
*** to prevent data corruption possible due to hardware design flaws.
|
||||
***
|
||||
*** For the CMD640, linux disables "IRQ unmasking" (hdparm -u1) on any
|
||||
*** drive for which the "prefetch" mode of the CMD640 is turned on.
|
||||
*** If "prefetch" is disabled (hdparm -p8), then "IRQ unmasking" can be
|
||||
*** used again.
|
||||
***
|
||||
*** For the CMD640, linux disables "32bit I/O" (hdparm -c1) on any drive
|
||||
*** for which the "prefetch" mode of the CMD640 is turned off.
|
||||
*** If "prefetch" is enabled (hdparm -p9), then "32bit I/O" can be
|
||||
*** used again.
|
||||
***
|
||||
*** The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT*
|
||||
*** automatically detected by Linux. For safe, reliable operation with such
|
||||
*** interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option.
|
||||
***
|
||||
*** Use of the "serialize" option is no longer necessary.
|
||||
BUGGY IDE CHIPSETS CAN CORRUPT DATA!!
|
||||
|
||||
================================================================================
|
||||
Common pitfalls:
|
||||
PCI versions of the CMD640 and RZ1000 interfaces are now detected
|
||||
automatically at startup when PCI BIOS support is configured.
|
||||
|
||||
Linux disables the "prefetch" ("readahead") mode of the RZ1000
|
||||
to prevent data corruption possible due to hardware design flaws.
|
||||
|
||||
For the CMD640, linux disables "IRQ unmasking" (hdparm -u1) on any
|
||||
drive for which the "prefetch" mode of the CMD640 is turned on.
|
||||
If "prefetch" is disabled (hdparm -p8), then "IRQ unmasking" can be
|
||||
used again.
|
||||
|
||||
For the CMD640, linux disables "32bit I/O" (hdparm -c1) on any drive
|
||||
for which the "prefetch" mode of the CMD640 is turned off.
|
||||
If "prefetch" is enabled (hdparm -p9), then "32bit I/O" can be
|
||||
used again.
|
||||
|
||||
The CMD640 is also used on some Vesa Local Bus (VLB) cards, and is *NOT*
|
||||
automatically detected by Linux. For safe, reliable operation with such
|
||||
interfaces, one *MUST* use the "cmd640.probe_vlb" kernel option.
|
||||
|
||||
Use of the "serialize" option is no longer necessary.
|
||||
|
||||
-------------------------------------------------------------------------------
|
||||
|
||||
Common pitfalls
|
||||
===============
|
||||
|
||||
- 40-conductor IDE cables are capable of transferring data in DMA modes up to
|
||||
udma2, but no faster.
|
||||
|
|
@ -49,19 +51,18 @@ Common pitfalls:
|
|||
- Even better try to stick to the same vendor and device type on the same
|
||||
cable.
|
||||
|
||||
================================================================================
|
||||
|
||||
This is the multiple IDE interface driver, as evolved from hd.c.
|
||||
This is the multiple IDE interface driver, as evolved from hd.c
|
||||
===============================================================
|
||||
|
||||
It supports up to 9 IDE interfaces per default, on one or more IRQs (usually
|
||||
14 & 15). There can be up to two drives per interface, as per the ATA-6 spec.
|
||||
14 & 15). There can be up to two drives per interface, as per the ATA-6 spec.::
|
||||
|
||||
Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64
|
||||
Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
|
||||
Tertiary: ide2, port 0x1e8; major=33; hde is minor=0; hdf is minor=64
|
||||
Quaternary: ide3, port 0x168; major=34; hdg is minor=0; hdh is minor=64
|
||||
fifth.. ide4, usually PCI, probed
|
||||
sixth.. ide5, usually PCI, probed
|
||||
Primary: ide0, port 0x1f0; major=3; hda is minor=0; hdb is minor=64
|
||||
Secondary: ide1, port 0x170; major=22; hdc is minor=0; hdd is minor=64
|
||||
Tertiary: ide2, port 0x1e8; major=33; hde is minor=0; hdf is minor=64
|
||||
Quaternary: ide3, port 0x168; major=34; hdg is minor=0; hdh is minor=64
|
||||
fifth.. ide4, usually PCI, probed
|
||||
sixth.. ide5, usually PCI, probed
|
||||
|
||||
To access devices on interfaces > ide0, device entries please make sure that
|
||||
device files for them are present in /dev. If not, please create such
|
||||
|
|
@ -80,12 +81,15 @@ seldom occurs. Be careful, and if in doubt, don't do it!
|
|||
|
||||
Drives are normally found by auto-probing and/or examining the CMOS/BIOS data.
|
||||
For really weird situations, the apparent (fdisk) geometry can also be specified
|
||||
on the kernel "command line" using LILO. The format of such lines is:
|
||||
on the kernel "command line" using LILO. The format of such lines is::
|
||||
|
||||
ide_core.chs=[interface_number.device_number]:cyls,heads,sects
|
||||
or ide_core.cdrom=[interface_number.device_number]
|
||||
|
||||
For example:
|
||||
or::
|
||||
|
||||
ide_core.cdrom=[interface_number.device_number]
|
||||
|
||||
For example::
|
||||
|
||||
ide_core.chs=1.0:1050,32,64 ide_core.cdrom=1.1
|
||||
|
||||
|
|
@ -96,10 +100,12 @@ geometry for partitioning purposes (fdisk).
|
|||
If the auto-probing during boot time confuses a drive (ie. the drive works
|
||||
with hd.c but not with ide.c), then an command line option may be specified
|
||||
for each drive for which you'd like the drive to skip the hardware
|
||||
probe/identification sequence. For example:
|
||||
probe/identification sequence. For example::
|
||||
|
||||
ide_core.noprobe=0.1
|
||||
or
|
||||
|
||||
or::
|
||||
|
||||
ide_core.chs=1.0:768,16,32
|
||||
ide_core.noprobe=1.0
|
||||
|
||||
|
|
@ -115,22 +121,24 @@ Such drives will be identified at boot time, just like a hard disk.
|
|||
|
||||
If for some reason your cdrom drive is *not* found at boot time, you can force
|
||||
the probe to look harder by supplying a kernel command line parameter
|
||||
via LILO, such as:
|
||||
via LILO, such as:::
|
||||
|
||||
ide_core.cdrom=1.0 /* "master" on second interface (hdc) */
|
||||
or
|
||||
|
||||
or::
|
||||
|
||||
ide_core.cdrom=1.1 /* "slave" on second interface (hdd) */
|
||||
|
||||
For example, a GW2000 system might have a hard drive on the primary
|
||||
interface (/dev/hda) and an IDE cdrom drive on the secondary interface
|
||||
(/dev/hdc). To mount a CD in the cdrom drive, one would use something like:
|
||||
(/dev/hdc). To mount a CD in the cdrom drive, one would use something like::
|
||||
|
||||
ln -sf /dev/hdc /dev/cdrom
|
||||
mkdir /mnt/cdrom
|
||||
mount /dev/cdrom /mnt/cdrom -t iso9660 -o ro
|
||||
|
||||
If, after doing all of the above, mount doesn't work and you see
|
||||
errors from the driver (with dmesg) complaining about `status=0xff',
|
||||
errors from the driver (with dmesg) complaining about `status=0xff`,
|
||||
this means that the hardware is not responding to the driver's attempts
|
||||
to read it. One of the following is probably the problem:
|
||||
|
||||
|
|
@ -165,7 +173,7 @@ drivers can always be compiled as loadable modules, the chipset drivers
|
|||
can only be compiled into the kernel, and the core code (ide.c) can be
|
||||
compiled as a loadable module provided no chipset support is needed.
|
||||
|
||||
When using ide.c as a module in combination with kmod, add:
|
||||
When using ide.c as a module in combination with kmod, add::
|
||||
|
||||
alias block-major-3 ide-probe
|
||||
|
||||
|
|
@ -176,10 +184,8 @@ driver using the "options=" keyword to insmod, while replacing any ',' with
|
|||
';'.
|
||||
|
||||
|
||||
================================================================================
|
||||
|
||||
Summary of ide driver parameters for kernel command line
|
||||
--------------------------------------------------------
|
||||
========================================================
|
||||
|
||||
For legacy IDE VLB host drivers (ali14xx/dtc2278/ht6560b/qd65xx/umc8672)
|
||||
you need to explicitly enable probing by using "probe" kernel parameter,
|
||||
|
|
@ -226,28 +232,31 @@ Other kernel parameters for ide_core are:
|
|||
|
||||
* "chs=[interface_number.device_number]" to force device as a disk (using CHS)
|
||||
|
||||
================================================================================
|
||||
|
||||
Some Terminology
|
||||
----------------
|
||||
IDE = Integrated Drive Electronics, meaning that each drive has a built-in
|
||||
controller, which is why an "IDE interface card" is not a "controller card".
|
||||
================
|
||||
|
||||
ATA = AT (the old IBM 286 computer) Attachment Interface, a draft American
|
||||
National Standard for connecting hard drives to PCs. This is the official
|
||||
name for "IDE".
|
||||
IDE
|
||||
Integrated Drive Electronics, meaning that each drive has a built-in
|
||||
controller, which is why an "IDE interface card" is not a "controller card".
|
||||
|
||||
The latest standards define some enhancements, known as the ATA-6 spec,
|
||||
which grew out of vendor-specific "Enhanced IDE" (EIDE) implementations.
|
||||
ATA
|
||||
AT (the old IBM 286 computer) Attachment Interface, a draft American
|
||||
National Standard for connecting hard drives to PCs. This is the official
|
||||
name for "IDE".
|
||||
|
||||
ATAPI = ATA Packet Interface, a new protocol for controlling the drives,
|
||||
similar to SCSI protocols, created at the same time as the ATA2 standard.
|
||||
ATAPI is currently used for controlling CDROM, TAPE and FLOPPY (ZIP or
|
||||
LS120/240) devices, removable R/W cartridges, and for high capacity hard disk
|
||||
drives.
|
||||
The latest standards define some enhancements, known as the ATA-6 spec,
|
||||
which grew out of vendor-specific "Enhanced IDE" (EIDE) implementations.
|
||||
|
||||
ATAPI
|
||||
ATA Packet Interface, a new protocol for controlling the drives,
|
||||
similar to SCSI protocols, created at the same time as the ATA2 standard.
|
||||
ATAPI is currently used for controlling CDROM, TAPE and FLOPPY (ZIP or
|
||||
LS120/240) devices, removable R/W cartridges, and for high capacity hard disk
|
||||
drives.
|
||||
|
||||
mlord@pobox.com
|
||||
--
|
||||
|
||||
|
||||
Wed Apr 17 22:52:44 CEST 2002 edited by Marcin Dalecki, the current
|
||||
maintainer.
|
||||
21
Documentation/ide/index.rst
Normal file
21
Documentation/ide/index.rst
Normal file
|
|
@ -0,0 +1,21 @@
|
|||
:orphan:
|
||||
|
||||
==================================
|
||||
Integrated Drive Electronics (IDE)
|
||||
==================================
|
||||
|
||||
.. toctree::
|
||||
:maxdepth: 1
|
||||
|
||||
ide
|
||||
ide-tape
|
||||
warm-plug-howto
|
||||
|
||||
changelogs
|
||||
|
||||
.. only:: subproject and html
|
||||
|
||||
Indices
|
||||
=======
|
||||
|
||||
* :ref:`genindex`
|
||||
|
|
@ -1,14 +1,14 @@
|
|||
|
||||
===================
|
||||
IDE warm-plug HOWTO
|
||||
===================
|
||||
|
||||
To warm-plug devices on a port 'idex':
|
||||
To warm-plug devices on a port 'idex'::
|
||||
|
||||
# echo -n "1" > /sys/class/ide_port/idex/delete_devices
|
||||
# echo -n "1" > /sys/class/ide_port/idex/delete_devices
|
||||
|
||||
unplug old device(s) and plug new device(s)
|
||||
unplug old device(s) and plug new device(s)::
|
||||
|
||||
# echo -n "1" > /sys/class/ide_port/idex/scan
|
||||
# echo -n "1" > /sys/class/ide_port/idex/scan
|
||||
|
||||
done
|
||||
|
||||
|
|
@ -31,7 +31,7 @@ drivers used by the Q40, apart from the very obvious (console etc.):
|
|||
char/joystick/* # most of this should work, not
|
||||
# in default config.in
|
||||
block/q40ide.c # startup for ide
|
||||
ide* # see Documentation/ide/ide.txt
|
||||
ide* # see Documentation/ide/ide.rst
|
||||
floppy.c # normal PC driver, DMA emu in asm/floppy.h
|
||||
# and arch/m68k/kernel/entry.S
|
||||
# see drivers/block/README.fd
|
||||
|
|
|
|||
|
|
@ -25,13 +25,13 @@ menuconfig IDE
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called ide-core.
|
||||
|
||||
For further information, please read <file:Documentation/ide/ide.txt>.
|
||||
For further information, please read <file:Documentation/ide/ide.rst>.
|
||||
|
||||
If unsure, say N.
|
||||
|
||||
if IDE
|
||||
|
||||
comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
|
||||
comment "Please see Documentation/ide/ide.rst for help/info on IDE drives"
|
||||
|
||||
config IDE_XFER_MODE
|
||||
bool
|
||||
|
|
@ -163,7 +163,7 @@ config BLK_DEV_IDETAPE
|
|||
along with other IDE devices, as "hdb" or "hdc", or something
|
||||
similar, and will be mapped to a character device such as "ht0"
|
||||
(check the boot messages with dmesg). Be sure to consult the
|
||||
<file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.txt>
|
||||
<file:drivers/ide/ide-tape.c> and <file:Documentation/ide/ide.rst>
|
||||
files for usage information.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
|
|
@ -251,7 +251,7 @@ config BLK_DEV_CMD640
|
|||
|
||||
The CMD640 chip is also used on add-in cards by Acculogic, and on
|
||||
the "CSA-6400E PCI to IDE controller" that some people have. For
|
||||
details, read <file:Documentation/ide/ide.txt>.
|
||||
details, read <file:Documentation/ide/ide.rst>.
|
||||
|
||||
config BLK_DEV_CMD640_ENHANCED
|
||||
bool "CMD640 enhanced support"
|
||||
|
|
@ -259,7 +259,7 @@ config BLK_DEV_CMD640_ENHANCED
|
|||
help
|
||||
This option includes support for setting/autotuning PIO modes and
|
||||
prefetch on CMD640 IDE interfaces. For details, read
|
||||
<file:Documentation/ide/ide.txt>. If you have a CMD640 IDE interface
|
||||
<file:Documentation/ide/ide.rst>. If you have a CMD640 IDE interface
|
||||
and your BIOS does not already do this for you, then say Y here.
|
||||
Otherwise say N.
|
||||
|
||||
|
|
@ -819,7 +819,7 @@ config BLK_DEV_ALI14XX
|
|||
boot parameter. It enables support for the secondary IDE interface
|
||||
of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
|
||||
I/O speeds to be set as well.
|
||||
See the files <file:Documentation/ide/ide.txt> and
|
||||
See the files <file:Documentation/ide/ide.rst> and
|
||||
<file:drivers/ide/ali14xx.c> for more info.
|
||||
|
||||
config BLK_DEV_DTC2278
|
||||
|
|
@ -830,7 +830,7 @@ config BLK_DEV_DTC2278
|
|||
This driver is enabled at runtime using the "dtc2278.probe" kernel
|
||||
boot parameter. It enables support for the secondary IDE interface
|
||||
of the DTC-2278 card, and permits faster I/O speeds to be set as
|
||||
well. See the <file:Documentation/ide/ide.txt> and
|
||||
well. See the <file:Documentation/ide/ide.rst> and
|
||||
<file:drivers/ide/dtc2278.c> files for more info.
|
||||
|
||||
config BLK_DEV_HT6560B
|
||||
|
|
@ -841,7 +841,7 @@ config BLK_DEV_HT6560B
|
|||
This driver is enabled at runtime using the "ht6560b.probe" kernel
|
||||
boot parameter. It enables support for the secondary IDE interface
|
||||
of the Holtek card, and permits faster I/O speeds to be set as well.
|
||||
See the <file:Documentation/ide/ide.txt> and
|
||||
See the <file:Documentation/ide/ide.rst> and
|
||||
<file:drivers/ide/ht6560b.c> files for more info.
|
||||
|
||||
config BLK_DEV_QD65XX
|
||||
|
|
@ -851,7 +851,7 @@ config BLK_DEV_QD65XX
|
|||
help
|
||||
This driver is enabled at runtime using the "qd65xx.probe" kernel
|
||||
boot parameter. It permits faster I/O speeds to be set. See the
|
||||
<file:Documentation/ide/ide.txt> and <file:drivers/ide/qd65xx.c>
|
||||
<file:Documentation/ide/ide.rst> and <file:drivers/ide/qd65xx.c>
|
||||
for more info.
|
||||
|
||||
config BLK_DEV_UMC8672
|
||||
|
|
@ -862,7 +862,7 @@ config BLK_DEV_UMC8672
|
|||
This driver is enabled at runtime using the "umc8672.probe" kernel
|
||||
boot parameter. It enables support for the secondary IDE interface
|
||||
of the UMC-8672, and permits faster I/O speeds to be set as well.
|
||||
See the files <file:Documentation/ide/ide.txt> and
|
||||
See the files <file:Documentation/ide/ide.rst> and
|
||||
<file:drivers/ide/umc8672.c> for more info.
|
||||
|
||||
endif
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user