ASoC: dapm: Add output driver widget

In some cases it was not possible to follow the appropiate power
ON/OFF sequence like in cases where the PGA needs to be enabled
before the driver and disabled before the PGA for pop reduction.

Add a widget to support output driver (speaker, haptic, vibra, etc)
drivers where power ON/OFF ordering is important.

Signed-off-by: Margarita Olaya Cabrera <magi.olaya@ti.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Olaya, Margarita 2010-12-10 21:11:44 -06:00 committed by Mark Brown
parent 5a7743edac
commit d88429a695
2 changed files with 16 additions and 0 deletions

View File

@ -71,6 +71,10 @@
wcontrols, wncontrols) \
{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols}
#define SND_SOC_DAPM_OUT_DRV(wname, wreg, wshift, winvert,\
wcontrols, wncontrols) \
{ .id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols}
#define SND_SOC_DAPM_MIXER(wname, wreg, wshift, winvert, \
wcontrols, wncontrols)\
{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
@ -115,6 +119,11 @@
{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \
.event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_OUT_DRV_E(wname, wreg, wshift, winvert, wcontrols, \
wncontrols, wevent, wflags) \
{ .id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \
.invert = winvert, .kcontrols = wcontrols, .num_kcontrols = wncontrols, \
.event = wevent, .event_flags = wflags}
#define SND_SOC_DAPM_MIXER_E(wname, wreg, wshift, winvert, wcontrols, \
wncontrols, wevent, wflags) \
{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \
@ -368,6 +377,7 @@ enum snd_soc_dapm_type {
snd_soc_dapm_mixer, /* mixes several analog signals together */
snd_soc_dapm_mixer_named_ctl, /* mixer with named controls */
snd_soc_dapm_pga, /* programmable gain/attenuation (volume) */
snd_soc_dapm_out_drv, /* output driver */
snd_soc_dapm_adc, /* analog to digital converter */
snd_soc_dapm_dac, /* digital to analog converter */
snd_soc_dapm_micbias, /* microphone bias (power) */

View File

@ -62,6 +62,7 @@ static int dapm_up_seq[] = {
[snd_soc_dapm_mixer_named_ctl] = 7,
[snd_soc_dapm_pga] = 8,
[snd_soc_dapm_adc] = 9,
[snd_soc_dapm_out_drv] = 10,
[snd_soc_dapm_hp] = 10,
[snd_soc_dapm_spk] = 10,
[snd_soc_dapm_post] = 11,
@ -72,6 +73,7 @@ static int dapm_down_seq[] = {
[snd_soc_dapm_adc] = 1,
[snd_soc_dapm_hp] = 2,
[snd_soc_dapm_spk] = 2,
[snd_soc_dapm_out_drv] = 2,
[snd_soc_dapm_pga] = 4,
[snd_soc_dapm_mixer_named_ctl] = 5,
[snd_soc_dapm_mixer] = 5,
@ -235,6 +237,7 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w,
break;
/* does not effect routing - always connected */
case snd_soc_dapm_pga:
case snd_soc_dapm_out_drv:
case snd_soc_dapm_output:
case snd_soc_dapm_adc:
case snd_soc_dapm_input:
@ -1250,6 +1253,7 @@ static ssize_t dapm_widget_show(struct device *dev,
case snd_soc_dapm_dac:
case snd_soc_dapm_adc:
case snd_soc_dapm_pga:
case snd_soc_dapm_out_drv:
case snd_soc_dapm_mixer:
case snd_soc_dapm_mixer_named_ctl:
case snd_soc_dapm_supply:
@ -1428,6 +1432,7 @@ static int snd_soc_dapm_add_route(struct snd_soc_dapm_context *dapm,
case snd_soc_dapm_adc:
case snd_soc_dapm_dac:
case snd_soc_dapm_pga:
case snd_soc_dapm_out_drv:
case snd_soc_dapm_input:
case snd_soc_dapm_output:
case snd_soc_dapm_micbias:
@ -1545,6 +1550,7 @@ int snd_soc_dapm_new_widgets(struct snd_soc_dapm_context *dapm)
w->power_check = dapm_dac_check_power;
break;
case snd_soc_dapm_pga:
case snd_soc_dapm_out_drv:
w->power_check = dapm_generic_check_power;
dapm_new_pga(dapm, w);
break;