Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 "These are four patches for three construction sites:

   - Fix register decoding for the combination of multi-core processors
     and multi-threading.

   - Two more fixes that are part of the ongoing DECstation resurrection
     work.  One of these touches a DECstation-only network driver.

   - Finally Markos' trivial build fix for the AP/SP support.

  (With this applied now all MIPS defconfigs are building again)"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: kernel: vpe: Make vpe_attrs an array of pointers.
  MIPS: Fix SMP core calculations when using MT support.
  MIPS: DECstation I/O ASIC DMA interrupt handling fix
  MIPS: DECstation HRT initialization rearrangement

arch/mips/dec/ioasic-irq.c

@@ -51,6 +51,14 @@ static struct irq_chip ioasic_irq_type = {
 	.irq_unmask = unmask_ioasic_irq,
 };
 
+void clear_ioasic_dma_irq(unsigned int irq)
+{
+	u32 sir;
+
+	sir = ~(1 << (irq - ioasic_irq_base));
+	ioasic_write(IO_REG_SIR, sir);
+}
+
 static struct irq_chip ioasic_dma_irq_type = {
 	.name = "IO-ASIC-DMA",
 	.irq_ack = ack_ioasic_irq,

arch/mips/dec/time.c

@@ -125,12 +125,16 @@ int rtc_mips_set_mmss(unsigned long nowtime)
 
 void __init plat_time_init(void)
 {
+	int ioasic_clock = 0;
 	u32 start, end;
 	int i = HZ / 8;
 
 	/* Set up the rate of periodic DS1287 interrupts. */
 	ds1287_set_base_clock(HZ);
 
+	/* On some I/O ASIC systems we have the I/O ASIC's counter.  */
+	if (IOASIC)
+		ioasic_clock = dec_ioasic_clocksource_init() == 0;
 	if (cpu_has_counter) {
 		ds1287_timer_state();
 		while (!ds1287_timer_state())
@@ -147,9 +151,21 @@ void __init plat_time_init(void)
 		mips_hpt_frequency = (end - start) * 8;
 		printk(KERN_INFO "MIPS counter frequency %dHz\n",
 			mips_hpt_frequency);
-	} else if (IOASIC)
-		/* For pre-R4k systems we use the I/O ASIC's counter.  */
-		dec_ioasic_clocksource_init();
+
+		/*
+		 * All R4k DECstations suffer from the CP0 Count erratum,
+		 * so we can't use the timer as a clock source, and a clock
+		 * event both at a time.  An accurate wall clock is more
+		 * important than a high-precision interval timer so only
+		 * use the timer as a clock source, and not a clock event
+		 * if there's no I/O ASIC counter available to serve as a
+		 * clock source.
+		 */
+		if (!ioasic_clock) {
+			init_r4k_clocksource();
+			mips_hpt_frequency = 0;
+		}
+	}
 
 	ds1287_clockevent_init(dec_interrupt[DEC_IRQ_RTC]);
 }

arch/mips/include/asm/dec/ioasic.h

@@ -31,8 +31,10 @@ static inline u32 ioasic_read(unsigned int reg)
 	return ioasic_base[reg / 4];
 }
 
+extern void clear_ioasic_dma_irq(unsigned int irq);
+
 extern void init_ioasic_irqs(int base);
 
-extern void dec_ioasic_clocksource_init(void);
+extern int dec_ioasic_clocksource_init(void);
 
 #endif /* __ASM_DEC_IOASIC_H */

arch/mips/kernel/csrc-ioasic.c

@@ -37,7 +37,7 @@ static struct clocksource clocksource_dec = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-void __init dec_ioasic_clocksource_init(void)
+int __init dec_ioasic_clocksource_init(void)
 {
 	unsigned int freq;
 	u32 start, end;
@@ -56,8 +56,14 @@ void __init dec_ioasic_clocksource_init(void)
 	end = dec_ioasic_hpt_read(&clocksource_dec);
 
 	freq = (end - start) * 8;
+
+	/* An early revision of the I/O ASIC didn't have the counter.  */
+	if (!freq)
+		return -ENXIO;
+
 	printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
 
 	clocksource_dec.rating = 200 + freq / 10000000;
 	clocksource_register_hz(&clocksource_dec, freq);
+	return 0;
 }

arch/mips/kernel/smp-cmp.c

@@ -99,7 +99,9 @@ static void cmp_init_secondary(void)
 
 	c->core = (read_c0_ebase() >> 1) & 0x1ff;
 #if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
-	c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE;
+	if (cpu_has_mipsmt)
+		c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) &
+			TCBIND_CURVPE;
 #endif
 #ifdef CONFIG_MIPS_MT_SMTC
 	c->tc_id  = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT;
@@ -177,9 +179,16 @@ void __init cmp_smp_setup(void)
 	}
 
 	if (cpu_has_mipsmt) {
-		unsigned int nvpe, mvpconf0 = read_c0_mvpconf0();
+		unsigned int nvpe = 1;
+#ifdef CONFIG_MIPS_MT_SMP
+		unsigned int mvpconf0 = read_c0_mvpconf0();
+
+		nvpe = ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
+#elif defined(CONFIG_MIPS_MT_SMTC)
+		unsigned int mvpconf0 = read_c0_mvpconf0();
 
 		nvpe = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
+#endif
 		smp_num_siblings = nvpe;
 	}
 	pr_info("Detected %i available secondary CPU(s)\n", ncpu);

arch/mips/kernel/vpe.c

@@ -1368,7 +1368,7 @@ static ssize_t ntcs_store(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR_RW(ntcs);
 
-static struct attribute vpe_attrs[] = {
+static struct attribute *vpe_attrs[] = {
 	&dev_attr_kill.attr,
 	&dev_attr_ntcs.attr,
 	NULL,

drivers/net/ethernet/amd/declance.c

@@ -725,6 +725,7 @@ static irqreturn_t lance_dma_merr_int(int irq, void *dev_id)
 {
 	struct net_device *dev = dev_id;
 
+	clear_ioasic_dma_irq(irq);
 	printk(KERN_ERR "%s: DMA error\n", dev->name);
 	return IRQ_HANDLED;
 }