USB: rndis_host, various cleanups

Cleanups to the rndis_host code, and a tweak that helps talking to
PXA hardware.  Mostly from Ole André Vadla Ravnås <oleavr@gmail.com>

  - Prevent SET_INTERFACE requests, they give PXA hardware bad indigestion
  - For paranoia, null a pointer after freeing its data
  - Wrap up ActiveSync oddities for RNDIS_QUERY in one routine
  - Use that wrapper when getting the Ethernet address
  - Whitespace fixes

Plus add a comment noting the open issues about some RNDIS clients still
needing TBD kinds of browbeating to accept non-jumbogram packets.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
David Brownell 2007-04-17 17:53:20 -07:00 committed by Greg Kroah-Hartman
parent aa2ce5ca6b
commit ddda086240

View File

@ -253,6 +253,7 @@ struct rndis_keepalive_c { /* IN (optionally OUT) */
* of that mess as possible.
*/
#define OID_802_3_PERMANENT_ADDRESS ccpu2(0x01010101)
#define OID_GEN_MAXIMUM_FRAME_SIZE ccpu2(0x00010106)
#define OID_GEN_CURRENT_PACKET_FILTER ccpu2(0x0001010e)
/*
@ -349,7 +350,7 @@ static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
case RNDIS_MSG_INDICATE: { /* fault */
// struct rndis_indicate *msg = (void *)buf;
dev_info(&info->control->dev,
"rndis fault indication\n");
"rndis fault indication\n");
}
break;
case RNDIS_MSG_KEEPALIVE: { /* ping */
@ -387,6 +388,71 @@ static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
return -ETIMEDOUT;
}
/*
* rndis_query:
*
* Performs a query for @oid along with 0 or more bytes of payload as
* specified by @in_len. If @reply_len is not set to -1 then the reply
* length is checked against this value, resulting in an error if it
* doesn't match.
*
* NOTE: Adding a payload exactly or greater than the size of the expected
* response payload is an evident requirement MSFT added for ActiveSync.
*
* The only exception is for OIDs that return a variably sized response,
* in which case no payload should be added. This undocumented (and
* nonsensical!) issue was found by sniffing protocol requests from the
* ActiveSync 4.1 Windows driver.
*/
static int rndis_query(struct usbnet *dev, struct usb_interface *intf,
void *buf, u32 oid, u32 in_len,
void **reply, int *reply_len)
{
int retval;
union {
void *buf;
struct rndis_msg_hdr *header;
struct rndis_query *get;
struct rndis_query_c *get_c;
} u;
u32 off, len;
u.buf = buf;
memset(u.get, 0, sizeof *u.get + in_len);
u.get->msg_type = RNDIS_MSG_QUERY;
u.get->msg_len = cpu_to_le32(sizeof *u.get + in_len);
u.get->oid = oid;
u.get->len = cpu_to_le32(in_len);
u.get->offset = ccpu2(20);
retval = rndis_command(dev, u.header);
if (unlikely(retval < 0)) {
dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) failed, %d\n",
oid, retval);
return retval;
}
off = le32_to_cpu(u.get_c->offset);
len = le32_to_cpu(u.get_c->len);
if (unlikely((8 + off + len) > CONTROL_BUFFER_SIZE))
goto response_error;
if (*reply_len != -1 && len != *reply_len)
goto response_error;
*reply = (unsigned char *) &u.get_c->request_id + off;
*reply_len = len;
return retval;
response_error:
dev_err(&intf->dev, "RNDIS_MSG_QUERY(0x%08x) "
"invalid response - off %d len %d\n",
oid, off, len);
return -EDOM;
}
static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
{
int retval;
@ -403,6 +469,8 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
struct rndis_set_c *set_c;
} u;
u32 tmp;
int reply_len;
unsigned char *bp;
/* we can't rely on i/o from stack working, or stack allocation */
u.buf = kmalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL);
@ -421,6 +489,12 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
* TX we'll stick to one Ethernet packet plus RNDIS framing.
* For RX we handle drivers that zero-pad to end-of-packet.
* Don't let userspace change these settings.
*
* NOTE: there still seems to be wierdness here, as if we need
* to do some more things to make sure WinCE targets accept this.
* They default to jumbograms of 8KB or 16KB, which is absurd
* for such low data rates and which is also more than Linux
* can usually expect to allocate for SKB data...
*/
net->hard_header_len += sizeof (struct rndis_data_hdr);
dev->hard_mtu = net->mtu + net->hard_header_len;
@ -434,7 +508,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
if (unlikely(retval < 0)) {
/* it might not even be an RNDIS device!! */
dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
goto fail_and_release;
goto fail_and_release;
}
tmp = le32_to_cpu(u.init_c->max_transfer_size);
if (tmp < dev->hard_mtu) {
@ -450,34 +524,15 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
dev->hard_mtu, tmp, dev->rx_urb_size,
1 << le32_to_cpu(u.init_c->packet_alignment));
/* Get designated host ethernet address.
*
* Adding a payload exactly the same size as the expected response
* payload is an evident requirement MSFT added for ActiveSync.
* This undocumented (and nonsensical) issue was found by sniffing
* protocol requests from the ActiveSync 4.1 Windows driver.
*/
memset(u.get, 0, sizeof *u.get + 48);
u.get->msg_type = RNDIS_MSG_QUERY;
u.get->msg_len = ccpu2(sizeof *u.get + 48);
u.get->oid = OID_802_3_PERMANENT_ADDRESS;
u.get->len = ccpu2(48);
u.get->offset = ccpu2(20);
retval = rndis_command(dev, u.header);
if (unlikely(retval < 0)) {
/* Get designated host ethernet address */
reply_len = ETH_ALEN;
retval = rndis_query(dev, intf, u.buf, OID_802_3_PERMANENT_ADDRESS,
48, (void **) &bp, &reply_len);
if (unlikely(retval< 0)) {
dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval);
goto fail_and_release;
}
tmp = le32_to_cpu(u.get_c->offset);
if (unlikely((tmp + 8) > (CONTROL_BUFFER_SIZE - ETH_ALEN)
|| u.get_c->len != ccpu2(ETH_ALEN))) {
dev_err(&intf->dev, "rndis ethaddr off %d len %d ?\n",
tmp, le32_to_cpu(u.get_c->len));
retval = -EDOM;
goto fail_and_release;
}
memcpy(net->dev_addr, tmp + (char *)&u.get_c->request_id, ETH_ALEN);
memcpy(net->dev_addr, bp, ETH_ALEN);
/* set a nonzero filter to enable data transfers */
memset(u.set, 0, sizeof *u.set);
@ -502,6 +557,7 @@ static int rndis_bind(struct usbnet *dev, struct usb_interface *intf)
fail_and_release:
usb_set_intfdata(info->data, NULL);
usb_driver_release_interface(driver_of(intf), info->data);
info->data = NULL;
fail:
kfree(u.buf);
return retval;
@ -618,7 +674,7 @@ rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
static const struct driver_info rndis_info = {
.description = "RNDIS device",
.flags = FLAG_ETHER | FLAG_FRAMING_RN,
.flags = FLAG_ETHER | FLAG_FRAMING_RN | FLAG_NO_SETINT,
.bind = rndis_bind,
.unbind = rndis_unbind,
.status = rndis_status,