AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity

Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq

Browse Source 
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Report the number of processors in PowerNow-k8 correctly
  [CPUFREQ] do not declare undefined functions
  [CPUFREQ] cleanup kconfig options
  [CPUFREQ] Longhaul - Revert Longhaul ver. 2
  [CPUFREQ] Remove deprecated /proc/acpi/processor/performance write support
  [CPUFREQ] Fix limited cpufreq when booted on battery
  Fix preemption warnings in speedstep-centrino.c
  [CPUFREQ] Longhaul - Correct PCI code
  [CPUFREQ] p4-clockmod: switch to rdmsr_on_cpu/wrmsr_on_cpu
This commit is contained in:
Linus Torvalds 2007-05-04 17:38:48 -07:00
commit ded1504dfa
10 changed files with 101 additions and 143 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
arch/i386/kernel/cpu/cpufreq/longhaul.c
View File

@ -590,20 +590,23 @@ static acpi_status longhaul_walk_callback(acpi_handle obj_handle,
static int enable_arbiter_disable(void)
{
struct pci_dev *dev;
int status;
int reg;
u8 pci_cmd;
status = 1;
/* Find PLE133 host bridge */
reg = 0x78;
dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0, NULL);
dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0,
NULL);
/* Find CLE266 host bridge */
if (dev == NULL) {
reg = 0x76;
dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_862X_0, NULL);
dev = pci_get_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_862X_0, NULL);
/* Find CN400 V-Link host bridge */
if (dev == NULL)
dev = pci_find_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
dev = pci_get_device(PCI_VENDOR_ID_VIA, 0x7259, NULL);
}
if (dev != NULL) {
/* Enable access to port 0x22 */
@ -615,10 +618,11 @@ static int enable_arbiter_disable(void)
if (!(pci_cmd & 1<<7)) {
printk(KERN_ERR PFX
"Can't enable access to port 0x22.\n");
return 0;
status = 0;
}
}
return 1;
pci_dev_put(dev);
return status;
}
return 0;
}
@ -629,7 +633,7 @@ static int longhaul_setup_vt8235(void)
u8 pci_cmd;
/* Find VT8235 southbridge */
dev = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
if (dev != NULL) {
/* Set transition time to max */
pci_read_config_byte(dev, 0xec, &pci_cmd);
@ -641,6 +645,7 @@ static int longhaul_setup_vt8235(void)
pci_read_config_byte(dev, 0xe5, &pci_cmd);
pci_cmd |= 1 << 7;
pci_write_config_byte(dev, 0xe5, pci_cmd);
pci_dev_put(dev);
return 1;
}
return 0;
@ -678,7 +683,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy)
sizeof(samuel2_eblcr));
break;
case 1 ... 15:
longhaul_version = TYPE_LONGHAUL_V2;
longhaul_version = TYPE_LONGHAUL_V1;
if (c->x86_mask < 8) {
cpu_model = CPU_SAMUEL2;
cpuname = "C3 'Samuel 2' [C5B]";

31
arch/i386/kernel/cpu/cpufreq/p4-clockmod.c
View File

@ -27,7 +27,6 @@
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/cpumask.h>
#include <linux/sched.h> /* current / set_cpus_allowed() */
#include <asm/processor.h>
#include <asm/msr.h>
@ -62,7 +61,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV))
return -EINVAL;
rdmsr(MSR_IA32_THERM_STATUS, l, h);
rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
if (l & 0x01)
dprintk("CPU#%d currently thermal throttled\n", cpu);
@ -70,10 +69,10 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
newstate = DC_38PT;
rdmsr(MSR_IA32_THERM_CONTROL, l, h);
rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
if (newstate == DC_DISABLE) {
dprintk("CPU#%d disabling modulation\n", cpu);
wrmsr(MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l & ~(1<<4), h);
} else {
dprintk("CPU#%d setting duty cycle to %d%%\n",
cpu, ((125 * newstate) / 10));
@ -84,7 +83,7 @@ static int cpufreq_p4_setdc(unsigned int cpu, unsigned int newstate)
*/
l = (l & ~14);
l = l | (1<<4) | ((newstate & 0x7)<<1);
wrmsr(MSR_IA32_THERM_CONTROL, l, h);
wrmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, l, h);
}
return 0;
@ -111,7 +110,6 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
{
unsigned int newstate = DC_RESV;
struct cpufreq_freqs freqs;
cpumask_t cpus_allowed;
int i;
if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
@ -132,17 +130,8 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
* Developer's Manual, Volume 3
*/
cpus_allowed = current->cpus_allowed;
for_each_cpu_mask(i, policy->cpus) {
cpumask_t this_cpu = cpumask_of_cpu(i);
set_cpus_allowed(current, this_cpu);
BUG_ON(smp_processor_id() != i);
for_each_cpu_mask(i, policy->cpus)
cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
}
set_cpus_allowed(current, cpus_allowed);
/* notifiers */
for_each_cpu_mask(i, policy->cpus) {
@ -256,17 +245,9 @@ static int cpufreq_p4_cpu_exit(struct cpufreq_policy *policy)
static unsigned int cpufreq_p4_get(unsigned int cpu)
{
cpumask_t cpus_allowed;
u32 l, h;
cpus_allowed = current->cpus_allowed;
set_cpus_allowed(current, cpumask_of_cpu(cpu));
BUG_ON(smp_processor_id() != cpu);
rdmsr(MSR_IA32_THERM_CONTROL, l, h);
set_cpus_allowed(current, cpus_allowed);
rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
if (l & 0x10) {
l = l >> 1;

6
arch/i386/kernel/cpu/cpufreq/powernow-k8.c
View File

@ -661,7 +661,8 @@ static int fill_powernow_table(struct powernow_k8_data *data, struct pst_s *pst,
dprintk("cfid 0x%x, cvid 0x%x\n", data->currfid, data->currvid);
data->powernow_table = powernow_table;
print_basics(data);
if (first_cpu(cpu_core_map[data->cpu]) == data->cpu)
print_basics(data);
for (j = 0; j < data->numps; j++)
if ((pst[j].fid==data->currfid) && (pst[j].vid==data->currvid))
@ -814,7 +815,8 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
/* fill in data */
data->numps = data->acpi_data.state_count;
print_basics(data);
if (first_cpu(cpu_core_map[data->cpu]) == data->cpu)
print_basics(data);
powernow_k8_acpi_pst_values(data, 0);
/* notify BIOS that we exist */

2
arch/i386/kernel/cpu/cpufreq/powernow-k8.h
View File

@ -215,8 +215,10 @@ static int core_frequency_transition(struct powernow_k8_data *data, u32 reqfid);
static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index);
#ifdef CONFIG_X86_POWERNOW_K8_ACPI
static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpufreq_frequency_table *powernow_table);
#endif
#ifdef CONFIG_SMP
static inline void define_siblings(int cpu, cpumask_t cpu_sharedcore_mask[])

10
arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
View File

@ -720,6 +720,7 @@ static int centrino_target (struct cpufreq_policy *policy,
cpu_set(j, set_mask);
set_cpus_allowed(current, set_mask);
preempt_disable();
if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) {
dprintk("couldn't limit to CPUs in this domain\n");
retval = -EAGAIN;
@ -727,6 +728,7 @@ static int centrino_target (struct cpufreq_policy *policy,
/* We haven't started the transition yet. */
goto migrate_end;
}
preempt_enable();
break;
}
@ -761,10 +763,13 @@ static int centrino_target (struct cpufreq_policy *policy,
}
wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY) {
preempt_enable();
break;
}
cpu_set(j, covered_cpus);
preempt_enable();
}
for_each_cpu_mask(k, online_policy_cpus) {
@ -796,8 +801,11 @@ static int centrino_target (struct cpufreq_policy *policy,
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
}
}
set_cpus_allowed(current, saved_mask);
return 0;
migrate_end:
preempt_enable();
set_cpus_allowed(current, saved_mask);
return 0;
}

19
arch/x86_64/kernel/cpufreq/Kconfig
View File

@ -16,6 +16,9 @@ config X86_POWERNOW_K8
help
This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
To compile this driver as a module, choose M here: the
module will be called powernow-k8.
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@ -38,6 +41,9 @@ config X86_SPEEDSTEP_CENTRINO
mobile CPUs. This means Intel Pentium M (Centrino) CPUs
or 64bit enabled Intel Xeons.
To compile this driver as a module, choose M here: the
module will be called speedstep-centrino.
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@ -55,6 +61,9 @@ config X86_ACPI_CPUFREQ
Processor Performance States.
This driver also supports Intel Enhanced Speedstep.
To compile this driver as a module, choose M here: the
module will be called acpi-cpufreq.
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say N.
@ -62,7 +71,7 @@ config X86_ACPI_CPUFREQ
comment "shared options"
config X86_ACPI_CPUFREQ_PROC_INTF
bool "/proc/acpi/processor/../performance interface (deprecated)"
bool "/proc/acpi/processor/../performance interface (deprecated)"
depends on PROC_FS
depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K8_ACPI
help
@ -86,16 +95,18 @@ config X86_P4_CLOCKMOD
slowdowns and noticeable latencies. Normally Speedstep should be used
instead.
To compile this driver as a module, choose M here: the
module will be called p4-clockmod.
For details, take a look at <file:Documentation/cpu-freq/>.
Unless you are absolutely sure say N.
config X86_SPEEDSTEP_LIB
tristate
default X86_P4_CLOCKMOD
tristate
default X86_P4_CLOCKMOD
endif
endmenu

46
drivers/acpi/processor_perflib.c
View File

@ -433,49 +433,6 @@ static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file)
PDE(inode)->data);
}
static ssize_t
acpi_processor_write_performance(struct file *file,
const char __user * buffer,
size_t count, loff_t * data)
{
int result = 0;
struct seq_file *m = file->private_data;
struct acpi_processor *pr = m->private;
struct acpi_processor_performance *perf;
char state_string[12] = { '\0' };
unsigned int new_state = 0;
struct cpufreq_policy policy;
if (!pr || (count > sizeof(state_string) - 1))
return -EINVAL;
perf = pr->performance;
if (!perf)
return -EINVAL;
if (copy_from_user(state_string, buffer, count))
return -EFAULT;
state_string[count] = '\0';
new_state = simple_strtoul(state_string, NULL, 0);
if (new_state >= perf->state_count)
return -EINVAL;
cpufreq_get_policy(&policy, pr->id);
policy.cpu = pr->id;
policy.min = perf->states[new_state].core_frequency * 1000;
policy.max = perf->states[new_state].core_frequency * 1000;
result = cpufreq_set_policy(&policy);
if (result)
return result;
return count;
}
static void acpi_cpufreq_add_file(struct acpi_processor *pr)
{
struct proc_dir_entry *entry = NULL;
@ -487,10 +444,9 @@ static void acpi_cpufreq_add_file(struct acpi_processor *pr)
/* add file 'performance' [R/W] */
entry = create_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
S_IFREG | S_IRUGO | S_IWUSR,
S_IFREG | S_IRUGO,
acpi_device_dir(device));
if (entry){
acpi_processor_perf_fops.write = acpi_processor_write_performance;
entry->proc_fops = &acpi_processor_perf_fops;
entry->data = acpi_driver_data(device);
entry->owner = THIS_MODULE;

61
drivers/cpufreq/Kconfig
View File

@ -9,6 +9,9 @@ config CPU_FREQ
clock speed, you need to either enable a dynamic cpufreq governor
(see below) after boot, or use a userspace tool.
To compile this driver as a module, choose M here: the
module will be called cpufreq.
For details, take a look at <file:Documentation/cpu-freq>.
If in doubt, say N.
@ -16,7 +19,7 @@ config CPU_FREQ
if CPU_FREQ
config CPU_FREQ_TABLE
tristate
tristate
config CPU_FREQ_DEBUG
bool "Enable CPUfreq debugging"
@ -32,19 +35,26 @@ config CPU_FREQ_DEBUG
4 to activate CPUfreq governor debugging
config CPU_FREQ_STAT
tristate "CPU frequency translation statistics"
select CPU_FREQ_TABLE
default y
help
This driver exports CPU frequency statistics information through sysfs
file system
tristate "CPU frequency translation statistics"
select CPU_FREQ_TABLE
default y
help
This driver exports CPU frequency statistics information through sysfs
file system.
To compile this driver as a module, choose M here: the
module will be called cpufreq_stats.
If in doubt, say N.
config CPU_FREQ_STAT_DETAILS
bool "CPU frequency translation statistics details"
depends on CPU_FREQ_STAT
help
This will show detail CPU frequency translation table in sysfs file
system
bool "CPU frequency translation statistics details"
depends on CPU_FREQ_STAT
help
This will show detail CPU frequency translation table in sysfs file
system.
If in doubt, say N.
# Note that it is not currently possible to set the other governors (such as ondemand)
# as the default, since if they fail to initialise, cpufreq will be
@ -78,29 +88,38 @@ config CPU_FREQ_DEFAULT_GOV_USERSPACE
endchoice
config CPU_FREQ_GOV_PERFORMANCE
tristate "'performance' governor"
help
tristate "'performance' governor"
help
This cpufreq governor sets the frequency statically to the
highest available CPU frequency.
To compile this driver as a module, choose M here: the
module will be called cpufreq_performance.
If in doubt, say Y.
config CPU_FREQ_GOV_POWERSAVE
tristate "'powersave' governor"
help
tristate "'powersave' governor"
help
This cpufreq governor sets the frequency statically to the
lowest available CPU frequency.
To compile this driver as a module, choose M here: the
module will be called cpufreq_powersave.
If in doubt, say Y.
config CPU_FREQ_GOV_USERSPACE
tristate "'userspace' governor for userspace frequency scaling"
help
tristate "'userspace' governor for userspace frequency scaling"
help
Enable this cpufreq governor when you either want to set the
CPU frequency manually or when an userspace program shall
be able to set the CPU dynamically, like on LART
<http://www.lartmaker.nl/>.
To compile this driver as a module, choose M here: the
module will be called cpufreq_userspace.
For details, take a look at <file:Documentation/cpu-freq/>.
If in doubt, say Y.
@ -116,6 +135,9 @@ config CPU_FREQ_GOV_ONDEMAND
do fast frequency switching (i.e, very low latency frequency
transitions).
To compile this driver as a module, choose M here: the
module will be called cpufreq_ondemand.
For details, take a look at linux/Documentation/cpu-freq.
If in doubt, say N.
@ -136,6 +158,9 @@ config CPU_FREQ_GOV_CONSERVATIVE
step-by-step latency issues between the minimum and maximum frequency
transitions in the CPU) you will probably want to use this governor.
To compile this driver as a module, choose M here: the
module will be called cpufreq_conservative.
For details, take a look at linux/Documentation/cpu-freq.
If in doubt, say N.

47
drivers/cpufreq/cpufreq.c
View File

@ -768,6 +768,9 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
unlock_policy_rwsem_write(cpu);
goto err_out;
}
policy->user_policy.min = policy->cpuinfo.min_freq;
policy->user_policy.max = policy->cpuinfo.max_freq;
policy->user_policy.governor = policy->governor;
#ifdef CONFIG_SMP
for_each_cpu_mask(j, policy->cpus) {
@ -858,10 +861,13 @@ static int cpufreq_add_dev (struct sys_device * sys_dev)
policy->governor = NULL; /* to assure that the starting sequence is
* run in cpufreq_set_policy */
unlock_policy_rwsem_write(cpu);
/* set default policy */
ret = cpufreq_set_policy(&new_policy);
ret = __cpufreq_set_policy(policy, &new_policy);
policy->user_policy.policy = policy->policy;
unlock_policy_rwsem_write(cpu);
if (ret) {
dprintk("setting policy failed\n");
goto err_out_unregister;
@ -1619,43 +1625,6 @@ static int __cpufreq_set_policy(struct cpufreq_policy *data,
return ret;
}
/**
* cpufreq_set_policy - set a new CPUFreq policy
* @policy: policy to be set.
*
* Sets a new CPU frequency and voltage scaling policy.
*/
int cpufreq_set_policy(struct cpufreq_policy *policy)
{
int ret = 0;
struct cpufreq_policy *data;
if (!policy)
return -EINVAL;
data = cpufreq_cpu_get(policy->cpu);
if (!data)
return -EINVAL;
if (unlikely(lock_policy_rwsem_write(policy->cpu)))
return -EINVAL;
ret = __cpufreq_set_policy(data, policy);
data->user_policy.min = data->min;
data->user_policy.max = data->max;
data->user_policy.policy = data->policy;
data->user_policy.governor = data->governor;
unlock_policy_rwsem_write(policy->cpu);
cpufreq_cpu_put(data);
return ret;
}
EXPORT_SYMBOL(cpufreq_set_policy);
/**
* cpufreq_update_policy - re-evaluate an existing cpufreq policy
* @cpu: CPU which shall be re-evaluated

1
include/linux/cpufreq.h
View File

@ -257,7 +257,6 @@ struct freq_attr {
/*********************************************************************
* CPUFREQ 2.6. INTERFACE *
*********************************************************************/
int cpufreq_set_policy(struct cpufreq_policy *policy);
int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
int cpufreq_update_policy(unsigned int cpu);